I Have a Samsung Focus i1917 (AT&T). It was working fine, but every once and a while it would reboot itself. 3 Days ago that morning I used it to check the news and everything was fine with is. That afternoon, I went to use it again and the Samsung Logo was flash on and off… This did this for over an hour.
I pulled the battery for 30 mins. I Put the battery back in and it still did the same thing. I Held down the POWER BUTTON > CAMERA BUTTON > VOL DOWN and the screen came up where you can format, but it quickly reboots itself. I got it in download mode and it stays up there, so I flashed it with the files found here. But after flashing it, it still does them same thing.
This Phone does NOT have a micro sd card
Open Phone image at : C:\Users\cjone_000\Desktop\New folder (3)\signed_phone_Cetus_ATT_4K.bin
Open Eboot image at : C:\Users\cjone_000\Desktop\New folder (3)\signed_eboot_Cetus_ATT_4K.eb0
Open PDA image at : C:\Users\cjone_000\Desktop\New folder (3)\signed_pda_Cetus_ATT_4K.nb0
Open CSC image at : C:\Users\cjone_000\Desktop\New folder (3)\signed_CSC_Cetus_ATT_i917.ATTJK3_4K.csc
Detect COM4 Port
[Channel 0] Confirm Model Name
[Channel 0] FLASH UNLOCK
[Channel 0] FLASH UNLOCK Success!!!
[Channel 0] Send Partition Table
[Channel 0] Partition Table is correct
[Channel 0] Erase MIBIB Region
[Channel 0] Write MIBIB Data
[Channel 0] MIBIB Download Success!!
[Channel 0] Erase FSBL Region
[Channel 0] Write FSBL Data
[Channel 0] FSBL Download Success!!
[Channel 0] Erase OSBL Region
[Channel 0] Write OSBL Data
[Channel 0] OSBL Download Success!!
[Channel 0] Erase AMSS Region
[Channel 0] Write AMSS Data
[Channel 0] AMSS Download Success!!
[Channel 0] Erase DSP1 Region
[Channel 0] Write DSP1 Data
[Channel 0] DSP1 Download Success!!
[Channel 0] Erase APPSBL Region
[Channel 0] Write APPSBL Data
[Channel 0] APPSBL Download Success!!
[Channel 0] Erase CSC Region
[Channel 0] Write CSC Data
[Channel 0] CSC Download Success!!
[Channel 0] Erase PDA Region
[Channel 0] Write PDA Data
[Channel 0] PDA Download Success!!
[Channel 0] FLASH LOCK
Click to expand...
Click to collapse
No one?
Related
hi guys, i need help, please help me. i've bought omnia 7 several days ago, and it's f*** up. first, there was problem with hard reset, after doing this nothing happen, all sh*** from last user was there again, so i've used jig (normal download mode by vol, cam and on wasn't working), upgrade from samsung, then stock rom, and.... stuck on samsung logo, 5 minutes, restart, logo and so on... i've tried custom rom, and loop again but logo was for about 10 min and restart. i've no idea what to do, again help me, please!!! i'm using old nokia now and it's anoying...
edit. here is log from up stock rom:
Open Phone image at : C:\Users\pat\Downloads\ROM 7004 I8700XENJK1\I8700 XEN I8700XENJK1\I8700 XEN I8700XENJK1\signed_phone_Cetus_Europe.bin
Open Eboot image at : C:\Users\pat\Downloads\ROM 7004 I8700XENJK1\I8700 XEN I8700XENJK1\I8700 XEN I8700XENJK1\signed_eboot_Cetus_Europe.eb0
Open PDA image at : C:\Users\pat\Downloads\ROM 7004 I8700XENJK1\I8700 XEN I8700XENJK1\I8700 XEN I8700XENJK1\signed_pda_Cetus_Europe.nb0
Open CSC image at : C:\Users\pat\Downloads\ROM 7004 I8700XENJK1\I8700 XEN I8700XENJK1\I8700 XEN I8700XENJK1\signed_CSC_Cetus_Europe_I8700XENJK1.cs c
Open Eboot image at : C:\Users\pat\Downloads\ROM 7004 I8700XENJK1\I8700 XEN I8700XENJK1\I8700 XEN I8700XENJK1\signed_eboot_Cetus_Europe.eb0
Open PDA image at : C:\Users\pat\Downloads\ROM 7004 I8700XENJK1\I8700 XEN I8700XENJK1\I8700 XEN I8700XENJK1\signed_pda_Cetus_Europe.nb0
Open CSC image at : C:\Users\pat\Downloads\ROM 7004 I8700XENJK1\I8700 XEN I8700XENJK1\I8700 XEN I8700XENJK1\signed_CSC_Cetus_Europe_I8700XENJK1.cs c
Detect COM7 Port
[Channel 0] Confirm Model Name
[Channel 0] FLASH UNLOCK
[Channel 0] FLASH UNLOCK Success!!!
[Channel 0] Send Partition Table
[Channel 0] Partition Table is correct
[Channel 0] Erase MIBIB Region
[Channel 0] Write MIBIB Data
[Channel 0] MIBIB Download Success!!
[Channel 0] Erase FSBL Region
[Channel 0] Write FSBL Data
[Channel 0] FSBL Download Success!!
[Channel 0] Erase OSBL Region
[Channel 0] Write OSBL Data
[Channel 0] OSBL Download Success!!
[Channel 0] Erase AMSS Region
[Channel 0] Write AMSS Data
[Channel 0] AMSS Download Success!!
[Channel 0] Erase DSP1 Region
[Channel 0] Write DSP1 Data
[Channel 0] DSP1 Download Success!!
[Channel 0] Erase APPSBL Region
[Channel 0] Write APPSBL Data
[Channel 0] APPSBL Download Success!!
[Channel 0] Erase CSC Region
[Channel 0] Write CSC Data
[Channel 0] CSC Download Success!!
[Channel 0] Erase PDA Region
[Channel 0] Write PDA Data
[Channel 0] PDA Download Success!!
[Channel 0] FLASH LOCK
previous os was the oldest one, from 2011
Hello, good day forum guys.
I come here to present a certain problem happened to my device as they do not know if with some of you also hear this case.
First I went here on the site in search of updating the xt1068 for android version 5.0 lollipop found him this link http://forum.xda-developers.com/moto-g-2014/development/xt1068-lollipop-dual-sim -t2938439
I made the correct procedure as well as the tutorial says downloaded the rom RETUAWS_XT1064_4.4.4_KXB21.85-17_cid9_CFC
Installed with this procedure
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash NON-HLOS.bin modem
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe erase cache
mfastboot.exe erase userdata
mfastboot.exe reboot
Waited for him to call, but rather called as the rom is the xt1064 appeared only a chip but everything perfect, then I downloaded the update with the fix to work both supdate-nofsg-working.zip chip - https://drive.google. with / open? id = 0B3 ... eG8 & authuser = 0
And installed the [Recovery] [Titan] TWRP 2.8.0.1 is Moto G 2014 to install the update done so I ended up not liking it had many bugs, I have tried several times to return to the previous version of 4.4.4 but could not because of these errors
In cell dizversion downgraded for primary gpt *
already on the PC it here target max-sparse-size: 256MB
sending 'partition' (32 KB) ...
OKAY [0.078s]
writing 'partition' ...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. Total time: 0.390s *
But I managed to come back with one backup I had my rom was just not as before, because I can no longer install any rom update over it by the CMD command promp.
Soon after I installed this rom http://www.htcmania.com/showthread.php?t=914821
sure it is from another forum but need your help after I installed this rom already with the above problems my device was not taking no chip was saying he was no chip, I ended up doing something I ended up doing work after you install these versions of xt1068 by CMD RETAILDSDSALL_XT1068_4.4.4_KXB21.85-14_cid7_CFC_SVC.xml
* RETAILDSDSALL_XT1068_4.4.4_KXB21.85-23_cid7_CFC.xml
RETBR_XT1068_4.4.4_KXB21.85-18_cid12_CFC.xml
RETGBALL_XT1068_4.4.4_KXB21.85-23_cid7_CFC.xml
I tried all these versions give the chip but ended up working for my surprise the WiFi did not want to turn on, already changed the kernel but nothing worked if anyone can help me I will be very grateful because I do not want to take guarantee for surely I already lost it .
reflash your modem and fsg files...from dsds firmwares
[ QUOTE = k2wl ; 57107527 ] reflash your modem and fsg files ... from dsds firmware [ / QUOTE]
Not found in the firmware that modem not only that comes when I draw these are
boot
flashfile
fsg
gpt when I install this appears this message D : \ Zeca Files \ Moto G 2014 \ RETGBALL_XT1068_4.4.4_KXB21.85-23_cid7_CFC.xml > fast
boot flash motoboot motoboot.img
Reported target max download size of 536870912 bytes
sending ' motoboot ' ( 2184 KB) ...
OKAY [ 0.140s ]
writing ' motoboot ' ...
( bootloader ) Motoboot : Preflash validation is tz
( bootloader ) Preflash validation failed
FAILED (remote failure )
finished. Total time: 0.423s
soon
motoboot when I install this appears this message D : \ Zeca Files \ Moto G 2014 \ RETGBALL_XT1068_4.4.4_KXB21.85-23_cid7_CFC.xml > fast
boot flash motoboot motoboot.img
Reported target max download size of 536870912 bytes
sending ' motoboot ' ( 2184 KB) ...
OKAY [ 0.140s ]
writing ' motoboot ' ...
( bootloader ) Motoboot : Preflash validation is tz
( bootloader ) Preflash validation failed
FAILED (remote failure )
finished. Total time: 0.423s
NON- HLOS when I install this appears this message D : \ Zeca Files \ Moto G 2014 \ RETGBALL_XT1068_4.4.4_KXB21.85-23_cid7_CFC.xml > fast
boot flash motoboot motoboot.img
Reported target max download size of 536870912 bytes
sending ' motoboot ' ( 2184 KB) ...
OKAY [ 0.140s ]
writing ' motoboot ' ...
( bootloader ) Motoboot : Preflash validation is tz
( bootloader ) Preflash validation failed
FAILED (remote failure )
finished. Total time: 0.423s
recovery
servicefile
system.img_sparsechunk.0
system.img_sparsechunk.1
system.img_sparsechunk.2
system.img_sparsechunk.3
My moto x XT1562 is sim-free and has a unlocked bootloader. It was running fine earlier but for the last few days has been almost useless.
It has started showing a shifted screen and the colors have started changing randomly. It also shows a strange multicolored bar over the screen from time to time. Since this change, it has become very very slow and almost impossible to use. I have successfully flashed the OEM latest build on it but it has not shown any improvement. After flashing the OEM build, it sometimes gets stuck in boot loop on Motorola logo and sometimes goes to the welcome screen but does not respond at all. Unfortunately, I cannot insert the screen shift images here.
I have tried everything that I could find and could not fix it. Looking for some help/direction as to what might be wrong. Could it be a hardware issue or memory issue? Or is there something that can solve this?
I have tried flashing the OEM firmware via mafastboot and RSDLite. Both complete fine but the result remains the same with slow/unresponsive and shifted screen. Current build is - XT1562_LUX_RETASIA_DS_6.0.1_MPD24.107-70_cid7_subsidy-DEFAULT_CFC
Mfastboot commands used (Everything completes OK) -
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash bootloader bootloader.img
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash system system.img_sparsechunk.4
mfastboot.exe flash system system.img_sparsechunk.5
mfastboot.exe flash system system.img_sparsechunk.6
mfastboot.exe flash system system.img_sparsechunk.7
mfastboot.exe flash system system.img_sparsechunk.8
mfastboot.exe flash system system.img_sparsechunk.9
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
mfastboot reboot
thats probably a hardware issue
hi guys,
my name is felipe, im from brazil, i have a xt1580 .
and after install recovery and supersu, it didn't have network and baseband is unknown,
i dont see imei either .
i use this commands in mfastboot:
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash system system.img_sparsechunk.4
mfastboot.exe flash system system.img_sparsechunk.5
mfastboot.exe flash system system.img_sparsechunk.6
mfastboot.exe flash system system.img_sparsechunk.7
mfastboot.exe flash system system.img_sparsechunk.8
mfastboot.exe flash system system.img_sparsechunk.9
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
mfastboot reboot
some times with, sparsechunk 10 and 11 too, depending on the rom version
i try with all this roms:
KINZIE_RETLA_DS_5.1.1_LPK23.145-5_cid12_subsidy-DEFAULT_CFC.info
KINZIE_RETLA_DS_6.0_MPK24.78-8_cid12_subsidy-DEFAULT_CFC.info
KINZIE_RETLA_DS_6.0_MPK24.78-13.3_cid12_subsidy-DEFAULT_CFC.info
XT1580_KINZIE_RETLA_DS_6.0_MPK24.78-8_cid12_subsidy-DEFAULT_CFC.xml - M (1) (this is have modifield flashfile).
i sucssefully back to this all stock roms, but dont solve problem, ever continues whitout imei , network signal, sometimes no found sim, and unknown baseband.
when i install lineage 13 or 14.1 , i can see baseband on android/config/about phone, but i can't see it on bootloader , still baseband (not found)
someone can help me please?
thanks.
PS: sorry for my bad english!
https://www.xsfirmware.com/motorola-moto-x-force-xt1580-firmware-flash-file/
Solution to no baseband no wifi no imei
I am having the same problem, bootloader blocked, debugging usb off, can anyone help me?
:good:Just in case anyone else needs this fix ... here goes.:
Background: I recently purchased a Moto G4 Play XT1607 (Amazon version) for cheap (15 bucks) with issues, knowingly. The issue was it would not connect to wifi nor sim card. Opened it up, checked connections on mainboard and USB daughter board. Nothing was obvious there, so in bootloader I noticed the baseband was indeed unknown. Simple enough I thought, reflash firmware ... etc. But no ... locked bootloader with no joy from the Motorola unlock site. I'm sort of a newby with Motorola devices with most of my experience on Samsung and LG but have owned a Droid Turbo so there was a kernel of knowledge with fastboot.
Yes, it's a locked down bootloader but some fastboot commands still work.
Steps I took after verifying that my bootloader was locked (via fastboot commands & Motorola unlock site):
Downloaded stock firmware [[url]https://mirrors.lolinet.com/firmware/moto/harpia/official/[/URL]]
Extracted to file, copied mfastboot contents into the extracted folder, shift/right click "open command here"
then ran the following commands:
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot oem fb_mode_clear
mfastboot reboot
C:\AndroidADB\mfastboot\XT1607_HARPIA_AMAZON_USA_MPI24.241-2.35-1_cid18_subsidy-
DEFAULT_regulatory-DEFAULT_CFC.xml>mfastboot flash modem NON-HLOS.bin
target max-sparse-size: 256MB
sending 'modem' (37052 KB)...
OKAY [ 1.554s]
writing 'modem'...
OKAY [ 1.041s]
finished. total time: 2.600s
On reboot and into setup wizard wifi connections were present, connected up and bam, a pretty nice $15.00 phone.
Of course you will need to have your PC already setup fastboot friendly. There's already a lot of good information within XDA and Google if you need that.
Hope this helps anyone else who has this issue! :good: