Database Users

Scratches on Athena body

Hello,
i want to change my Ameo in a new one because there are a lot of scratches on the front body. The reason is that the keyboard slipping on the surface of the body.
If any one have the same problem please Post it here because i want to show T- Mobile that this is a failure of construction.

Mine is exactly the same, I tried to take a picture, but it wasnt comming out very well, I was quite annoyed because I tried to keep it good. Does anybody know if this happens with the black ones or is it just silver. mine isnt insured and T-Mobile wouldnt entertain me for insurance because it was 3 months old. though I have heard you can insure it online somewhere.

i've got the same kind of scratches at exactly the same positions.
but i don't think t-mobile will do anything about this
i'ts a normal sign of use

I have some scratches as well, fairly similar to yours. I'll have some pics made if I can get a hold of a good enough camera.

I have a scratch at the bottom of the screen surround. The keyboard clear top has a tiny bump on it (from where it was moulded i think) and this has scratched the case! If it had a decent leather case then it wouldnt happen!

Same here, Same scratches, same area..
Guess we need to find a decent case to carry our precious around in...
Something that has some padding between the 2 parts.

Mine doesn't have this problem. Not a single scratch at all. It still look brand new. I don't use the keyboard or the leather case though. I just carry mine "naked" with my DIY belt pouch. I just have the standard free plastic screen protector over the screen area only and not the body.
This is ironic. The keyboard is supposed to protect but does the opposite.

eaglesteve said:
This is ironic. The keyboard is supposed to protect but does the opposite.
Click to expand...
Click to collapse
It definetely does protect (the screen from cracks).
And imho some scratches on the body of the ameo are much better than a cracked screen

You now, we are speaking about a 800€ all in one device? Such a failure must not happen. If you had a 800€ Notebook with the same problem you would complaine about.

This is what my U1000 looks like close to the VGA camera on the front.
There are 2 more areas where I have some damage but I can't capture it properly on camera.

This is why we should take out insurance on our most expensive phones, as i hate scratches on my phones and if you complain about it with your provider/supplier and they are not willing to replace it when its a manufacture defect then i would personally claim on my insurance QUOTE (MY PHONE IS LOST/STOLEN TO GET BACK A REPLACEMENT) Its too expensive a device for it to scratch so easily.

I have the black HTC Advantage and I have the scratches too.

I have the black Athena and barely any scratches on mine. I use the stock case. The only time I got it scratched is when I first got it because I tried to use it without the case. Mistake on my part.
If you search the forum, you can also buy a $25 solution that protects your entire Athena. It's a plastic transparent covering that protects the entire body of the device. I think I may have posted it in the past to the accessories area. Well worth the tiny investment to protect the looks of your device.

Yep, I have the Black HTC Advantage X7500 and I have no scratches on it. I also do carry naked in my pocket especially around the office to meetings. However, I do feel I need something to protect it without gaining the bulk. I am still looking for a belt clip to carry it.

Just found this product.
http://www.shieldzone.com/item_description/HTCX7500.html
Read good review on PocketPCThoughts for a different product.
Has anyone tried it? It states as full body shield which includes guards for keyboard as well.

Looks Intresting.. But we all know that these type of solution are never as easy to install (Esp. as there are 8 pieces for the Athena)
as they are in the Promo vidz. The vidz also mention that the film has Adhesive on it. How would this affect the deve by:
1. Discoloring over time
2. Being able to easily remove the film, if need or if damaged.
3. Being removed from the screen, without pulling the touchscreen's
touch sensor film off.
Has anybody tried this stuff yet? I think I'll wait for more feedback before I buy.

http://mobilitytoday.com/articles/invisible_shield_protection.html
From some of comments, it seems easy to remove from a pda.
I don't know if that comment was from someone who works for ShieldZone though.

Staroip said:
Just found this product.
http://www.shieldzone.com/item_description/HTCX7500.html
Read good review on PocketPCThoughts for a different product.
Has anyone tried it? It states as full body shield which includes guards for keyboard as well.
Click to expand...
Click to collapse
I just ordered one. I'm having it shipped via 3 day UPS. I'll post my thoughts once I try it out. For the cost it's worth a try. They also have a lifetime replacement policy so if they get screwed up you get a free one. We'll see how it goes.

ltxda said:
I just ordered one. I'm having it shipped via 3 day UPS. I'll post my thoughts once I try it out. For the cost it's worth a try. They also have a lifetime replacement policy so if they get screwed up you get a free one. We'll see how it goes.
Click to expand...
Click to collapse
I will wait for your feedback before I try one. It seems to be right thing to have with this device but I am not sure yet.

lpsi2000 said:
I will wait for your feedback before I try one. It seems to be right thing to have with this device but I am not sure yet.
Click to expand...
Click to collapse
I have it on for over 4 months. Search this very forum for an extensive discussion on it. Easy to install with the water spray bottle provided. The screen protector is a bit sticky so I took it off and used a regular one.
Don't ask any more questions. Just search for the original thread here
Here
http://forum.xda-developers.com/showthread.php?t=298808

Clear Coat HTC Touch Pro Fully Body Protection?

http://www.clear-coat.com/product.php?productid=475&cat=0&page=1
im a bit skeptic about this product, have anyone tried previous products by clear coat?

Found a review of it here : http://www.intomobile.com/2008/06/23/clear-coat-full-body-scratch-protection-for-iphone.html

WDawn said:
Found a review of it here : http://www.intomobile.com/2008/06/23/clear-coat-full-body-scratch-protection-for-iphone.html
Click to expand...
Click to collapse
to be honest, when i cant find any other reviews... then suddenly theres a really positive review, that makes me really skeptical...
and yes, it is this EXACT same review makes me skeptical about this product lol

Sounds like
http://www.lowes.com/lowes/lkn?action=productDetail&productId=88113-74130-PFW486&lpage=none
That's the stuff I used in my bathroom to frost my windows... I got it wet and slid it on.. used a squeegee and flattened it all out and 3 years later is is still sticking there.
The difference is that this is
1.) Clear
2.) Cut into the proper shape (you could do this yourself with some measuring but it saves hassle)
3.) the squeegee is probably smaller.
My bathroom windows are in a VERY humid environment... I have never had ANY peeling.
However I don't keep my bathroom windows in my pocket... so I don't know if the corners will peel up.
My main point is that for $24 of this "film" to cover a TINY phone... you can buy the same thing for $18 that would cover 10 phones... if the product works fantastic... the profit margin for them is HUGE. If it doesn't work... it's the biggest rip off ever.
See if Gila makes a clear one... get $18 worth and tinker away.

http://forum.xda-developers.com/showthread.php?t=425314

So it's good or not ? Anyone use one of these ?

asolano895 said:
So it's good or not ? Anyone use one of these ?
Click to expand...
Click to collapse
I've seen them used on iPhones, hard to put on but once it's on, it stays.

Black93300ZX said:
I've seen them used on iPhones, hard to put on but once it's on, it stays.
Click to expand...
Click to collapse
Since you've had the Fuze already... Is the shape exactly the same as the TP? It looks like sprints version is a little more round along the corners. I'd Like to go ahead and purchase one of these for the Fuze but don't want to have to send it back.

venelar said:
Since you've had the Fuze already... Is the shape exactly the same as the TP? It looks like sprints version is a little more round along the corners. I'd Like to go ahead and purchase one of these for the Fuze but don't want to have to send it back.
Click to expand...
Click to collapse
The only difference I noticed when seeing the 2 up next to each other was the shape of the speaker hole on the back, that might be enough to throw the protection off. Ask Raspster about it more, he had both the European and the Fuze at the same time, so he could tell you better than I could.

I got one, just to try it out.
Exactly as described above. Its a bit fiddly getting on but once on, it sticks very well.
Its great at sticking to flat surfaces, not so good on curves. And they don't even try and cover the corners on the device, which I would think are the places I'd want protected if I was to drop it.
The texture makes the back look very different from normal; its much nicer without the cover on. On the front, you can't really see the cover at all; edges are perfectly aligned with the phones edges.
The back and the front of the phone are covered very well. Sides not so great. Corners not at all. Front looks good. Back looks crap.
My opinion, its no way worth $24

just got mine on Friday exactly as it's described, protects almost every part of the phone with their cut out plastic shield, however as mentioned in earlier post... doesn't really cover the edges, all in all... does really stick and so far looks pretty ok with the exception of little bubbles within the shield (poor application technique)

marcel808 said:
I got one, just to try it out.
Exactly as described above. Its a bit fiddly getting on but once on, it sticks very well.
Its great at sticking to flat surfaces, not so good on curves. And they don't even try and cover the corners on the device, which I would think are the places I'd want protected if I was to drop it.
The texture makes the back look very different from normal; its much nicer without the cover on. On the front, you can't really see the cover at all; edges are perfectly aligned with the phones edges.
The back and the front of the phone are covered very well. Sides not so great. Corners not at all. Front looks good. Back looks crap.
My opinion, its no way worth $24
Click to expand...
Click to collapse
Hi Marcel808,
Is it easy to peel it off without tearing the phone's original casing? Especially the back cover. I just ordered mine, hope it arrives soon.

Proghtc said:
http://forum.xda-developers.com/showthread.php?t=425314
Click to expand...
Click to collapse
I have used the Zagg's products (formerly Invisible Shield) on my 6800, 6700, wifes Centro and even custom ordered for my Pioneer 6800DVD in my car. I really like the product, the service is second to none... That said, I think since I have used the product and know how it performs in pockets, and how to install correctly (installed dozens of shields for myself, family and friends), I may try this new product.
Screen protection has always been great and flat surfaces (side) great as well but the corners usually give way, slide and start to bubble after about 4 months of heavy in and out of the pocket use.
This is a $24 experiment begging to happen.... now if Sprint would just release the damn phone!

I would also like to know this. Can it be removed again without leaving marks on the phone?
How scratch proof is it really?
Because of the lack of info on the site (still no video's on how to apply the thing, their forum is just about empty and they don't reply to customer questions...) they really don't seem to thrustworthy ...
DicE
serphinox said:
Hi Marcel808,
Is it easy to peel it off without tearing the phone's original casing? Especially the back cover. I just ordered mine, hope it arrives soon.
Click to expand...
Click to collapse

mrrogers1 said:
I have used the Zagg's products (formerly Invisible Shield) on my 6800, 6700, wifes Centro and even custom ordered for my Pioneer 6800DVD in my car. I really like the product, the service is second to none... That said, I think since I have used the product and know how it performs in pockets, and how to install correctly (installed dozens of shields for myself, family and friends), I may try this new product.
Screen protection has always been great and flat surfaces (side) great as well but the corners usually give way, slide and start to bubble after about 4 months of heavy in and out of the pocket use.
This is a $24 experiment begging to happen.... now if Sprint would just release the damn phone!
Click to expand...
Click to collapse
I would get the one released by Zagg. They offer a lifetime replacement on all products and they will replace it no questions I know. Their stuff is nearly impossible to scratch and I TRIED just about everything to scratch it. All phones full covers are $25. Never had any bubbling issues with Zagg's products.

yes it can easily be removed without any mark left at all....I found the cover started to collect dusk a lot (it must be slightly sticky) so I removed it.

Phantisy said:
I would get the one released by Zagg. They offer a lifetime replacement on all products and they will replace it no questions I know. Their stuff is nearly impossible to scratch and I TRIED just about everything to scratch it. All phones full covers are $25. Never had any bubbling issues with Zagg's products.
Click to expand...
Click to collapse
Trust me, I know oh too well the replacement process and have replaced and installed many over the last 5 years.
The fact that I know the Zagg product so well, makes the experiment more interesting. I know the Zagg stuff so well that I will know if this Clear Coat stands a chance AND since it's only $25... It might turn out to be junk, the company could not stand behind the guarantee BUT we'll see.

*Update
Just got my phone yesterday and I just ordered the Clear Coat. I'll install and do a little initial write up. I'll order the Zagg shield when it becomes available and do a comparison.
It's only money and it IS a $700 device.... (but I only paid $250 for it)
Stay tuned guys.
**Update
Just ordered a Zagg full body shield at 40% off as they just got them and were doing a Halloween special I guess. I should have the Cleat Coat on Mon/Tues and the Zagg will probably be here the week after. I think I'll install the Clear Coat first, use it for a week or so and then install the Zagg and do the same.

Can anyone who has purchased tell me if there is a cutout for the speaker on the front? Tah!

waaz1d said:
Can anyone who has purchased tell me if there is a cutout for the speaker on the front? Tah!
Click to expand...
Click to collapse
I don't have mine yet but why on earth would there NOT be a cutout for the earpiece???

Navitech Leather Case

Hi Guys,
I ordered one of these and it arrived this morning, A500 fits in snug as a bug in a rug!
Quality is really impressive, and all the cut out slots for ports are in the right place.
http://www.amazon.co.uk/Navitech-Ex...K9WE/ref=sr_1_3?ie=UTF8&qid=1306931117&sr=8-3
£14.99 So I think is the cheapest fitted case around? Thought I would share for all!
Dan

Could you post a couple of pics? I was thinking of getting this, but the two photos they have of it on amazon don't seem to be of the same case. Also it looks like they flipped the second one cause the back camemra is on the wrong side.
Edit:
Actualy after comparing the front shot is of the PDair BX2 and the back shot is of the PDair BX1 that has been flipped and had the PDair logo Photoshopped out.
Sent from my A500 using XDA Premium App

are the 16mb and 32mb tabs the same
external dimensions?

secularhuman said:
external dimensions?
Click to expand...
Click to collapse
16gb and 32gb are identical in size -
height - 260mm (10.24 inches)
width - 177mm (6.97 inches)
thickness - 13.3 mm (.53 inches)
Hope it helps!

Does this case provide access to the SD card slot without removing the Tab from the case. I have the Acer case, which is a very snug fit making swapping sdhc cards a lot more of a pain than I like to suffer (which is none at all really
Dave

davmyc said:
Does this case provide access to the SD card slot without removing the Tab from the case. I have the Acer case, which is a very snug fit making swapping sdhc cards a lot more of a pain than I like to suffer (which is none at all really
Dave
Click to expand...
Click to collapse
Hi there...
I have this case as well.
No. You'd have to remove the unit from the case to access the micro sd card.
the other thing that is not great about the case (which I'm going to modify) is that the leather around the bezel actually covers the edge of the screen, not just the border...it's a little smaller than I'd like. Why?
If you use the stock Android Browser, there is a great feature - Quick Controls - that allow you to slide your finger from off the screen onto the screen and bring up browser coltrols exactly where you need them. SUPER trick and very easy...
..and this case does not allow you to use this feature...
So, yeah. Modifications coming. When done I will post pics...Hopefully by the time I buy the perfect follow up case, they have thought of these things...

got mine today, shipping only took 1 week
Nicely built. Split keyboard still easy to use. Looks very smart.
It does allow the tablet to
slide down a little so the rfcamera gets covered up, bot a little surgery will fix that. If you use it upsidedown,
it doesnt slide down enuf to over the camera or the keys at thr screen bottom.
Secular

so...which one of the two different photo is????

Navitech case review
After having this case for over a week, I'm noticing a few things that are beginning to make me shop for another case...
1) The flap that tucks under the A500 to hold it in place has no real fastener so the more I use it, the more it is loosening up and the more it wants to slide down making the camera useless in the case.
2) The more I use it, the more the cheap leather (or..whatever it is...) is loosening up and is getting a bit..baggy around the screen.
3) I truly wish it had 1/8 of an inch more around the screen area to be able to use the gestures with the stock browser because I LOVE the way they work.
At this point, I'm probably going to start modifying it so it serves it's protection purpose until I get the next case. I am already starting to shop...
If you can live with these issues, by all means go ahead and get one - overall it's not that bad if you are willing to do a few mods to it...But be forewarned. You are getting what you pay for at this price...

try upside down for item one
1) The flap that tucks under the A500 to hold it in place has no real fastener so the more I use it, the more it is loosening up and the more it wants to slide down making the camera useless in the case.
most progrms and b
rowsers allow upside down operation.

secularhuman said:
1) The flap that tucks under the A500 to hold it in place has no real fastener so the more I use it, the more it is loosening up and the more it wants to slide down making the camera useless in the case.
most progrms and b
rowsers allow upside down operation.
Click to expand...
Click to collapse
...and? there's ONE hole in the border / frame of the case that is JUST big enough to see the front camera when it's in the perfect position. If the camera is not lined up with that hole - no workie...
Also, if you put the unit in upside down, not only does the FRONT camera not work, but the camera on the back, the speakers, and the jack for the dock are covered as well. Also no workie...
Also does not address the loosening up of the flap issue..I've only had it a week and ALREADY it's pretty loose and allows the unit to slide Very Easily inside the case...
Ummm...Do you work for Navitech by any chance?

no I dont work for them
Ummm...Do you work for Navitech by any chance? [/QUOTE]
no but I have one. when upsidedn the rfc works as do the speakers, the ffc no.
maybe some velcro would be an easy fix.
secular

the acer branded case also slides a great bit after a short time, but it is a very thin material that provides almost no drop protection.
At least this is leather ....

The case from navitech is half the price of the Acer case and is way better. The Acer case isn't only rubber, but seriously rubbish. I used doublesided tape for the flap of the navitech, the tab doesn't slide anymore

Thanks for the idea
gerke said:
The case from navitech is half the price of the Acer case and is way better. The Acer case isn't only rubber, but seriously rubbish. I used doublesided tape for the flap of the navitech, the tab doesn't slide anymore
Click to expand...
Click to collapse
The double sided tape works great!
Secular

I have had this case for 2 weeks and loving it so far. Great fit.
The flap that holds thetablet snug did get loose as people mentioned. Iused a 2x1 inch piece of industrial velcro to creat a latch. Works like a champ and i can remove the tab when needed.

I've had this case on order from amazon.com (U.S.) and so far although they claim they shipped it June 6 I've seen no sign of it. No tracking info was provided. After contacting them through Amazon, I got a response stating that they had had trouble with shipments to the U.S., and in exchange for refunding my shipping fee they asked I wait another week.
Waiting, but not impressed (with Navitech) so far.

I had a problem with my shipment as well. They've asked me to wait a week longer and they (because the shipment never came) asked if I want a new product or a refund.
I asked for a new product and they sent it today via first class airmail.
It's not their fault that post offices keep losing shipments. Actually we're both unhappy. They had to ship two products instead of one and I had to wait a month for it.
C'est la vie

Well mine finally showed up today. Battered and dirty in a big mailing folder not a box. The case doesn't seem any worse for the trip it had taken, and my A500 is having a nap in it right now.
The flap that tucks under it to hold it in the case is very soft leather and doesn't keep the tablet from slipping a little up or down. Still, this case should be find to carry my A500 out and about in and keep me from worrying about scratching the thing.

[Q] Does anyone have the leather pouch?

I love the look of the Galaxy Tab 10.1, and I take good care of my stuff so I don;t really need a think and bulky case. I saw the leather pouch on their webite, and thought it was perfect, since I just need something to protect it from bumps and scratches while carrying it.
Has anyone seen this, used it, had a hands-on with it? Does anyone own it?
Are there cheaper 3rd party ones?
Edit: This forum will not let me link to the pouch, but it is $29.99.

I had the book cover case on order but I ended up canceling it. I found a belkin case at best buy for $45 its thin doesnt add much bulk at all and it it folds into a stand. I just wanted something thin and easy to protect the screen. I'm not worried about dropping it.
I dont have the name or model number I left the box on my desk at work. I'll update later with the info. I couldnt find it on the belkin website or besbuy.
Funny thing the best buy employees didnt even know they had it when I went in last friday.

I bought the leather one that was right next to that one and I do not think it adds a lot of bulk to it but it def protects it and thats what is most important to me.
sgtmoody said:
I had the book cover case on order but I ended up canceling it. I found a belkin case at best buy for $45 its thin doesnt add much bulk at all and it it folds into a stand. I just wanted something thin and easy to protect the screen. I'm not worried about dropping it.
I dont have the name or model number I left the box on my desk at work. I'll update later with the info. I couldnt find it on the belkin website or besbuy.
Funny thing the best buy employees didnt even know they had it when I went in last friday.
Click to expand...
Click to collapse

galaxytabevo said:
I love the look of the Galaxy Tab 10.1, and I take good care of my stuff so I don;t really need a think and bulky case. I saw the leather pouch on their webite, and thought it was perfect, since I just need something to protect it from bumps and scratches while carrying it.
Has anyone seen this, used it, had a hands-on with it? Does anyone own it?
Are there cheaper 3rd party ones?
Edit: This forum will not let me link to the pouch, but it is $29.99.
Click to expand...
Click to collapse
Yep, I'm with you, I didn't want anything too bulky with so many flaps, etc.
I'm glad I bought the pouch. It's perfect and it's a tight fit. Just to test how tight it is, I held it upside down with the opening side down and the Tab didn't slide out at all.

I got the pouch, it was free since I was one of the first 200 at the launch on the 8th. I use it daily but I will be swapping it most likely for the book case by samsung when I can get it a bit easier.......I have a belkin leather one that is still unopened lol idk it seems a bit bulky

I have the Belkin folio stand. I only bought it because of convenience. My cat nearly jumped on to my tablet while it was laying on the couch, so I wanted something to protect it (and the Samsung case isn't available yet).
The fit is very snug, and it folds up to various viewing angles. It has a nice elastic strap that can be pulled around to hold it shut.
It is a _little_ bulky. The selling point on this tablet is the weight and thickness. That being said, the case weighs almost as much as the tablet. So, don't get it if weight is important to you.
Overall it's pretty nice. Probably a bit overpriced. When people want to play with the tab though, I always take it out of the case. It's so much prettier without it .

The Samsung Book Cover case just shipped and should be here by week's end. I'll keep you posted on it. Personally, I don't like anything that I have to keep pulling it out and pushing it in. I feel it's a matter of time before a scratch occurs.

Please do, I have belkin one and just don't love it. The Samsung one is back ordered again, and would like your impressions on it.
akarol said:
The Samsung Book Cover case just shipped and should be here by week's end. I'll keep you posted on it. Personally, I don't like anything that I have to keep pulling it out and pushing it in. I feel it's a matter of time before a scratch occurs.
Click to expand...
Click to collapse

Thanks for information on the cases, but I don't want a case anymore. I'd rather have a nice pouch or neoprene sleeve that will protect it from scuffs of traveling.
The thing is I don't want to spend $30 for a sleeve. I just want a nice sleeve that I can carry the Tab in, without breaking the bank. It doesn't have to be an "official" sleeve, as long as it fits, I don't care.

akarol said:
The Samsung Book Cover case just shipped and should be here by week's end. I'll keep you posted on it. Personally, I don't like anything that I have to keep pulling it out and pushing it in. I feel it's a matter of time before a scratch occurs.
Click to expand...
Click to collapse
yea I agree with your statement especially since I use the keyboard and media dock. they wont fit with any case what so ever.......I even tried to take the docking station part off again like the directions say to make more room but was still unable to do so lol

I have the suede pouch from sfbags.co
Originally for the replaced Xoom, it is a tight fit but works great.
They have a great service.

evb1 said:
I have the suede pouch from sfbags.co
Originally for the replaced Xoom, it is a tight fit but works great.
They have a great service.
Click to expand...
Click to collapse
Since the Tab is longer than the XOOM, does it pop out more? How durable is the sleeve?

Check out my A500 case from Ebay (for European Buyers)-with pictures!

Hi
http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=150621849701#ht_2626wt_905
I just ordered one of these on ebay, and i am here to show some pics of it in order to help some people to clarify some doubts, like those i had before.
When i say it's for european buyers, it's because i got it from ebay from germany and so the costs are less expensive if you buy it from the states (i'm from Portugal)
The material looks very good, although it's not real leather. The stand function is very functional and very well designed. It adds a fair bit of bulk, but i can live with it (i prefer security over style)
The main reason for this choise are those clips that holds the tablet in place, and allows a nice view of the toy so well and shiny, better than the other cases with the labels that can easily come in front of your screen after some time of use.
You can use the case as a horizontal stand, and also hold it as a book...
When closed there is a elastic grip to keep the case closed and also necessary for the tablet not to slip away from the case. In fact this is the only fault i notest with this case, it has only 5 plastic clips on three sides of the case instead of all 4 sides, so the tablet slides into the case through the right side where there are no clips and it can slip away if you hold the case in vertical mode with this side down. Not an issue untill know, but it can be if the owner forgot this and dont use the elastic wrist to keep it safe...
So, i just have the case i was expecting and know i just feel saver with it carrying it around the house.
Now the pics:
P.S. If you have some questions please feel free to leave it here.

More pics...

this one looks really nice
Is there somewhere i can order it without having to pay with a paypal account

got one that looks similar on amazon. only difference is its got openings for the speakers and its cheaper for $30. i've posted pics of it on Amazon...can't post link here coz i'm new
google 'acase a500' then click on the 2nd search return.

jibweb said:
this one looks really nice
Is there somewhere i can order it without having to pay with a paypal account
Click to expand...
Click to collapse
Nope...
I guess you have to keep searching

eooxx said:
got one that looks similar on amazon. only difference is its got openings for the speakers and its cheaper for $30. i've posted pics of it on Amazon...can't post link here coz i'm new
google 'acase a500' then click on the 2nd search return.
Click to expand...
Click to collapse
I know this case.
On my review i didn´t mention but this case has 2 openings for speakers which are lifted when you put the tablet in the standing mode, when it is closed it´s protected from the dust...so i guess this is a better idea.

Looks just like my case from Amazon too! Got mine for like 15 shipped 2day. It works great except that the tabs get weak after time.
Sent from my A500 using Tapatalk

I have this case also. I like it, but i want to buy he blurex slim case. It fits better. I am in he netherlands andere cant order IT.

Cheaper here:http://www.dhgate.com/pv-ff80808130e5a14a013107977c782391.html
But i'd like to get a slim-fit case,Just like a clip.

what is this?
what is this?