Related
How to get your custom flash count to 0 to return your device for warranty.
I did this on p3110 jellybean 4.2.2
Should work on other versions as well.
Required: Root access, Triangle Away, Odin Mobile , stock recovery image
As you all know, to get root access you need to flash custom recovery which increases your flash counter. But you need root access to to get triangle away to work. If you have custom recovery, every time the device restarts it automatically counts customs flash to 1....
But as you know flashing samsung stuff will not count towards the flash counter
1. Restore your tablet to stock: http://forum.xda-developers.com/showthread.php?t=2283598
Now in your freshly stock device:
2. Root your device,
http://forum.xda-developers.com/showthread.php?t=1957160
This will increase your custom flash count.
3. Install Triangle away, Odin mobile.
4. Copy stock recovery image onto your device.
5. In Triangle Away, reset flash counter to 0. DO NOT REBOOT your device. At the moment your flash count is 0.
6. In Odin Mobile on your device, flash the stock recovery image. Your device is fully samsungified right now so flash counter will not increase everytime it reboots.
7. Odin mobile will automatically reboot once the flashing is done.
8. Your device will have a boot error which it will fix by itself (happened to me, not to sure it will happen to you)
Check your download mode on your device, it should say:
Custom Binary Download: No
Current Binary: SAMSUNG_OFFICIAL
I attached stock recovery image from Jellybean 4.2.2;
I tested it on Jellybean 4.1.2 it works as well.
Thank You.
Please rename ur thread as [GUIDE][HOW TO] RESET BINARY COUNTER
It seems more friendly and good otherwise people will mistaken u as a noob asking questions in development section seeing ur thread name.
Thanks for the guide.
Good guide. :good:
Can someone post recovery img for p3100, stock 4.1.2?
---------- Post added at 10:37 PM ---------- Previous post was at 10:35 PM ----------
You might forget to mention about unroot .
download rom e.g. from www.samsung-updates.com ; open the *.tar.md5 file and extract the recovery.img from there
If you are on Windows:
You can convert "recovery.img" by using Flashable-Recovery-Converter-P31XX-V1.7 into a flashable zip too (if you want to flash over CWM, PhilZ Touch or TWRP instead of MobileOdin).
Download and ectract trhe zip, put "recovery.img" into the same folder an run the "P31XX-flashable-recovery-converter.bat".
idhbar said:
Can someone post recovery img for p3100, stock 4.1.2?
---------- Post added at 10:37 PM ---------- Previous post was at 10:35 PM ----------
You might forget to mention about unroot .
Click to expand...
Click to collapse
Is this about unrooting or reseting the counter?
Think before you post.
Luigi2012SM64DS said:
Is this about unrooting or reseting the counter?
Think before you post.
Click to expand...
Click to collapse
Check out the first line of Op . It is all about get back the warrenty and unroot is the part of warrenty.
---------- Post added at 01:59 AM ---------- Previous post was at 01:34 AM ----------
I think you got your answer .
Hi all....
Today i was trying to flash the latest firmware for my i9506 (I9506XXUBNA2).
All flashing went fine...until it reaches the "Hidden" partition.
So....a big FAIL appears.
I was facing the same problem when i flashed the France(Orange) 4.3 firmware but then the problem was solved by flashing Philz recovery and rebooted.
Now it doesn`t work anymore...it gets stuck at booting animation.
Any solution for this?Maybe a .pit file will solve the problem?
Thank you!
Problem solved!It wasn`t the partition table the problem.Even so...Odin still gives "FAIL" error when trying to flash "Hidden" partition.
The main problem when updating to 4.3 is the recovery partion wich is not flashed properly.
So...if you want to update to latest 4.3 (with no errors after booting, like Samsung Keboard FC`ing every 5 seconds) try this firmware, this Odin and this recovery!
So....at first...flast the attached firmware via Odin!
Uncheck the "Auto Reboot" box.
Odin will "FAIL" to flash "HIDDEN" partition!
Don`t worry....just press and keep the power+volume down buttons until the phone reboots again in download mode.
Reset Odin and again, uncheck the "Auto Reboot" box before flashing "recovery.tar.md5"
Flash "recovery.tar.md5" provided here!
After the recovery is flashed, first the boot must be in recovery mode!enter in recovery mode by pressing and keeping volume up and power button.
In recovery mode the phone automatically will flash something on your device!
After that....the phone will reboot!
That`s it!
I don`t know if this method will void the Knox warranty because i already have KNOX WARRANTY VOID : 0x1 so try at your own risk!
Moved here and OP please read the Forum Rules on posting, as this does not belong in the Dev Sections. Thanks
still with "samsung keyboard error"
hey man!
i've tried your procedure. i still got the keyboard stopped error. i used the odin, rom and recovery you have provided.
have you done re-partition? i havent done re-partition. maybe that could be the reason why i still had that error. do you have other solution for that?
---------- Post added at 09:30 PM ---------- Previous post was at 09:11 PM ----------
marbayn said:
hey man!
i've tried your procedure. i still got the keyboard stopped error. i used the odin, rom and recovery you have provided.
have you done re-partition? i havent done re-partition. maybe that could be the reason why i still had that error. do you have other solution for that?
Click to expand...
Click to collapse
im so sorry to what i have said this procedure doesnt work. this procedure is tested by me and it worked without keyboard error after reboot.
THE PROCEDURE MUST BE FOLLOWED RELIGIOUSLY!
NO AUTO REBOOT IS A MUST, YOUR VERY FIRST BOOT MUST BE IN "RECOVERY MODE"
---------- Post added at 09:36 PM ---------- Previous post was at 09:30 PM ----------
THANK YOU VERY MUCH "aresbv2000" !!!
YOUR PROCEDURE WORKED!
I failed because i didnt follow the whole procedure properly. now i realized how crucial tiny details is.
"NO AUTO REBOOT IN ODIN, THE VERY FIRST BOOT MUST BE IN RECOVERY MODE"
:laugh::good:
marbayn said:
hey man!
i've tried your procedure. i still got the keyboard stopped error. i used the odin, rom and recovery you have provided.
have you done re-partition? i havent done re-partition. maybe that could be the reason why i still had that error. do you have other solution for that?
---------- Post added at 09:30 PM ---------- Previous post was at 09:11 PM ----------
im so sorry to what i have said this procedure doesnt work. this procedure is tested by me and it worked without keyboard error after reboot.
THE PROCEDURE MUST BE FOLLOWED RELIGIOUSLY!
NO AUTO REBOOT IS A MUST, YOUR VERY FIRST BOOT MUST BE IN "RECOVERY MODE"
---------- Post added at 09:36 PM ---------- Previous post was at 09:30 PM ----------
THANK YOU VERY MUCH "aresbv2000" !!!
YOUR PROCEDURE WORKED!
I failed because i didnt follow the whole procedure properly. now i realized how crucial tiny details is.
"NO AUTO REBOOT IN ODIN, THE VERY FIRST BOOT MUST BE IN RECOVERY MODE"
:laugh::good:
Click to expand...
Click to collapse
I have tried the procedure but it doesn"t work. have you done re-partition when you flash recovery ?
souhail.beraich said:
I have tried the procedure but it doesn"t work. have you done re-partition when you flash recovery ?
Click to expand...
Click to collapse
Just try again and right after you flashed the recovery image reboot right away to recovery mode. Press volume up and power right away.
marbayn said:
Just try again and right after you flashed the recovery image reboot right away to recovery mode. Press volume up and power right away.
Click to expand...
Click to collapse
have you done re-partition when you flash recovery image ?
souhail.beraich said:
have you done re-partition when you flash recovery image ?
Click to expand...
Click to collapse
I did not tick re-partition.:good:
root won't stick
again you saved my ass! my samsung keyboard is now working!
next and only issue left is to make root stick! i downloaded "http://forum.xda-developers.com/showthread.php?t=2529064" and flashed via philz touch. i gain root on one boot only.. supersu is fcuked, wont block knox or install su binarys. but all apps gain root access except "es file explorer" which won't enable "root explorer". if i only soft reboot the root sticks.
anyone successfully rooted i9506 4.3?
I have one problem after this, my Wifi aint wokin, any idea on how to fix that ?
Celzeron said:
I have one problem after this, my Wifi aint wokin, any idea on how to fix that ?
Click to expand...
Click to collapse
Redid the operartion with the french Rom and it now seems to be working :good::good:
Thx a bunch for this post, i would have been fcuked without it :cyclops:
This post just saved my day
aresbv2000 said:
Problem solved!It wasn`t the partition table the problem.Even so...Odin still gives "FAIL" error when trying to flash "Hidden" partition.
The main problem when updating to 4.3 is the recovery partion wich is not flashed properly.
So...if you want to update to latest 4.3 (with no errors after booting, like Samsung Keboard FC`ing every 5 seconds) try this firmware, this Odin and this recovery!
So....at first...flast the attached firmware via Odin!
Uncheck the "Auto Reboot" box.
Odin will "FAIL" to flash "HIDDEN" partition!
Don`t worry....just press and keep the power+volume down buttons until the phone reboots again in download mode.
Reset Odin and again, uncheck the "Auto Reboot" box before flashing "recovery.tar.md5"
Flash "recovery.tar.md5" provided here!
After the recovery is flashed, first the boot must be in recovery mode!enter in recovery mode by pressing and keeping volume up and power button.
In recovery mode the phone automatically will flash something on your device!
After that....the phone will reboot!
That`s it!
I don`t know if this method will void the Knox warranty because i already have KNOX WARRANTY VOID : 0x1 so try at your own risk!
Click to expand...
Click to collapse
hi , please , can you post new link ?? thx
allal123 said:
hi , please , can you post new link ?? thx
Click to expand...
Click to collapse
Sorry mate...i do not own this phone anymore! I`ve had enough with this crappy Sam****! Now I have a Sony Xperia Z1 Compact! 10x better than Samsung! This is just my opinion....not a negative publicity! Have a nice day my friend!
this phone is not a crappy phone
here is the link where Our phone is so much alive.
http://forum.xda-developers.com/showthread.php?t=2597058
---------- Post added at 07:22 PM ---------- Previous post was at 07:17 PM ----------
its maturing here:
http://forum.xda-developers.com/showthread.php?t=2767448
Maybe is too late but will help to some other members.
Wanted to root mine i9506 so i must change build for proper root
I got same problem but mine case was 5.0.1 Lolipop ,Odin will fail flashing hidden part
Flashed with same version and country origin of mine phone.
After phone ON get some errors android process stoped bla bla bla
Factory reset with Vol UP + home + power and now all fine
Hi guys,
I've got some serious issue with my I9505. It is not booting after downgraden back from a instable custom ROM.
When i try to boot, i see the samsung logo for 1 second and then black screen.
Recovery mode is not working. Samsung logo for 1 second and then black screen.
Download mode is working fine. I can flash a stock rom and odin says PASS. But still not booting.
Download mode says:
Product Name. GT-I9505
Current Binary; Custom
System status; Custom
Knox Kernel Lock; 0x0
Knox Warranty Void; 0x1
CSB-CONFIG-LSB; 0x30
Write protection enable
eMMC Burst MODE enable
Any suggestion guys?
Flash some kernel with custom recovery ......may it bring your recovery back then u need to flash a 4.4.2 custom rom via recovery ......then 4.4.2 stock firmware via odin
First of all try to flash some kernel with custom recovery
---------- Post added at 04:25 PM ---------- Previous post was at 04:23 PM ----------
Which custom rom were u using nd which firmware u flashed
aayushkhajuria2842 said:
Flash some kernel with custom recovery ......may it bring your recovery back then u need to flash a 4.4.2 custom rom via recovery ......then 4.4.2 stock firmware via odin
First of all try to flash some kernel with custom recovery
---------- Post added at 04:25 PM ---------- Previous post was at 04:23 PM ----------
Which custom rom were u using nd which firmware u flashed
Click to expand...
Click to collapse
Thnx for your reply!
The problem is i cannot access the recovery. I tried flashing TWRP en CWM via Odin, but no luck..
Odin says PASS< but still cannot access recovery.
I was running GPE 4.3 by Jamal and tried upgrading to GPE 4.4.2 by Jamal but this ROM gave me weird errors. WHen i tried reverting back to 4.3 the issue started.
D-Amo said:
Thnx for your reply!
The problem is i cannot access the recovery. I tried flashing TWRP en CWM via Odin, but no luck..
Odin says PASS< but still cannot access recovery.
I was running GPE 4.3 by Jamal and tried upgrading to GPE 4.4.2 by Jamal but this ROM gave me weird errors. WHen i tried reverting back to 4.3 the issue started.
Click to expand...
Click to collapse
Flash STOCK android 4.4.2 by ODIN :highfive:. You cant downgrade android 4.4.2 to android 4.3.
That was the mistake u cant revert back to 4.3 from any 4.4.2 rom because of new bootloader
---------- Post added at 04:51 PM ---------- Previous post was at 04:49 PM ----------
Download a 4.4.2 stock rom and try through odin
Thanx if I helped u
Joku1981 said:
Flash STOCK android 4.4.2 by ODIN :highfive:. You cant downgrade android 4.4.2 to android 4.3.
Click to expand...
Click to collapse
I already tried flashing several stock samsung roms to my device via Odin. They all give me the PASS message, but do not boot.
D-Amo said:
I already tried flashing several stock samsung roms to my device via Odin. They all give me the PASS message, but do not boot.
Click to expand...
Click to collapse
Are u sure flashed a correct android 4.4.2 STOCK Rom through Odin?
D-Amo said:
I already tried flashing several stock samsung roms to my device via Odin. They all give me the PASS message, but do not boot.
Click to expand...
Click to collapse
It should be a 4.4.2 firmware nt 4.3 as @JoKu said
Joku1981 said:
Are u sure flashed a correct android 4.4.2 STOCK Rom through Odin?
Click to expand...
Click to collapse
I flashed I9505XXUFNB8, this should be a 4.4.2?
Then atleast you should have been able to flash philz recovery
aayushkhajuria2842 said:
Then atleast you should have been able to flash philz recovery
Click to expand...
Click to collapse
Just tried flashing the stock rom again => PASS
Then flashed philz recovery => PASS
Still not booting
Still no recovery..
Don't know what to do..
Sometimes flshing a new stock firware requires factory reset bt u cant also boot to recovery
aayushkhajuria2842 said:
Sometimes flshing a new stock firware requires factory reset bt u cant also boot to recovery
Click to expand...
Click to collapse
No booting to recovery is not possible. Phone doesn't do anything now..
Weird thing is, i think this has never worked. When phone worked fine, i still needed to boot to recovery via an app. It never worked via the VOLUME UP-MENU-POWER buttons.
My S4 is up and running again on 4.4.2 stock ROM.
Really stupid.. Apparantly my battery wasn't charged enough. I charged it again, reflashed and all was good!
Thanks for your support!
**You can begin the following process from any Build/ROM but you must already have Root Access**
**Required** FlashFire - Play BETA - PREVIEW
1. Join the G+ community using the same Google account as you're using for Play on your phone/tablet Here.
2. Sign up to receive the BETA versions from Play Here.
- Use the link provided after sign-up to download the app.
**Caution!**The process below is only for the Sprint G900P S5 Variant! Use on any other device may result in a hardbrick.
Download:
- G900P_OA6_Stock_Rooted_ROM (File removed for safety reasons. See here: http://forum.xda-developers.com/showpost.php?p=61362280&postcount=94)
Set your screen timeout setting to 10 mins before beginning!
1. Place the ROM onto your device (use either internal or ext-sdcard).
2. Open the FlashFire app and "Agree" to the Terms and Conditions.
3. Press "(+)" twice to bring up the "Actions" menu.
4. Select "Flash Zip or OTA" and locate and select the ROM. Leave "Auto-mount" unchecked under the "Options" menu and press the checkmark to continue.
5. From the main menu Uncheck all options under "EverRoot" and use default "Reboot" settings.
6. Last, press the lightning bolt then "Ok" to begin the flash .
The screen will turn black then display the contents of your system before beginning the flash. FlashFire will pause for about 1 minute while flashing the "system" partition. Once complete your device will reboot and pause on the Sprint splash screen for about 1 - 2 minutes before completely rebooting. Done!
Tip: for blazing fast speed turn off animations from Developer Options and reboot!
Known Issues:
- None!
Notes:
1. This process will not affect your knox warranty flag.
2. The above process will update your Modem, Non-hlos, System, Kernel, Stock Recovery, and Bootloader to OA6.
3. As of 5/7/2015 no need to wipe prior to flashing! The ROM will automatically perform a factory data reset.
4. If you are currently unrooted and on a non-"Towelroot-able" firmware version you must a)downgrade to NE5 using Odin, b)root using Towelroot then proceed with the above process.
reserved
I'm curious to see if this works...unfortnately, i can't try it right now though.
i may attempt this later today. ive been wanting to put other roms on it. so i guess if it does trip knox, thats ok.
Has anyone done this? Success? Failure? I've always read that you can't flash firmware/modem via mobile Odin.
I am currently 4.4.4 and stock unrooted. I have to downgrade to 4.4.2, use towelroot, install Mobile Odin and then I will be able to try this out.
muniz_ri said:
***I initially put this ROM together for a User in another thread who theorized that you can update to Stock, Rooted, OA6 using Mobile Odin while maintaining your knox warranty flag at 0x0. Unfortunately he inadvertantly flashed TWRP before testing this method and tripped his knox warranty flag. I am putting this out there if anyone else that currently has a knox warranty flag of 0x0 is brave enough to try it***
Prerequisites: You can begin this process from any previous Build/ROM but you must already have root and MobileOdin Pro installed.
1. Place the G900P_OA6_100%_Stock_Rooted_ROM onto your ext-sdcard.
2. Using Mobile Odin select the ROM from the OTA/Zip slot.
3. Uncheck "Everoot", "Inject SuperSu", and "Inject Mobile Odin."
4. Select to Reboot to Download Mode then Flash the ROM.
5. Once the Flash is complete and you are in Download Mode flash the G900P_OA6_Stock_Partitions using Odin's PDA slot (AP in Odin v3.09+). Done!
Notes:
1. The above process will update your Modem, Non-hlos, System, Kernel, Stock Recovery, and Bootloader to OA6.
Click to expand...
Click to collapse
I am willing to give this a try right now. However, I have not rooted since updating to 5.0 What is the best way to establish a Knox trip-free root? Will kernel downgrades and towelrooting still work?
---------- Post added at 10:45 PM ---------- Previous post was at 10:39 PM ----------
Ramer said:
Has anyone done this? Success? Failure? I've always read that you can't flash firmware/modem via mobile Odin.
Click to expand...
Click to collapse
I can actually confirm that flashing stock firmware is possible with Mobile Odin Pro as far back as the Galaxy S3 However, I have honestly never tried a stock firmware flash via Mobile Odin since Samsung's introduction of Knox..
MooreAJr said:
I am willing to give this a try right now. However, I have not rooted since updating to 5.0 What is the best way to establish a Knox trip-free root? Will kernel downgrades and towelrooting still work?
---------- Post added at 10:45 PM ---------- Previous post was at 10:39 PM ----------
I can actually confirm that flashing stock firmware is possible with Mobile Odin Pro as far back as the Galaxy S3 However, I have honestly never tried a stock firmware flash via Mobile Odin since Samsung's introduction of Knox..
Click to expand...
Click to collapse
I'm really interested in knowing your results. With Kitkat on the Sprint S5 it never seemed successful because of the modem. Thanks for "taking one" for the team.
MooreAJr said:
I am willing to give this a try right now. However, I have not rooted since updating to 5.0 What is the best way to establish a Knox trip-free root? Will kernel downgrades and towelrooting still work?
---------- Post added at 10:45 PM ---------- Previous post was at 10:39 PM ----------
I can actually confirm that flashing stock firmware is possible with Mobile Odin Pro as far back as the Galaxy S3 However, I have honestly never tried a stock firmware flash via Mobile Odin since Samsung's introduction of Knox..
Click to expand...
Click to collapse
You will need to Odin flash the previous "towelrootable" firmware, root, install mobile odin then follow the above process.
muniz_ri said:
You will need to Odin flash the previous "towelrootable" firmware, root, install mobile odin then follow the above process.
Click to expand...
Click to collapse
Wait, but I thought flashing an entire previous firmware resulted in hard-bricks because of Knox and its bootloader? I am not willing to try a flash of an old firmware if it risks bricking my device.
MooreAJr said:
Wait, but I thought flashing an entire previous firmware resulted in hard-bricks because of Knox and its bootloader? I am not willing to try a flash of an old firmware if it risks bricking my device.
Click to expand...
Click to collapse
You can flash any stock tar without hard bricking. I've went from 4.4.4 to 5.0 and back prior to running the latest Android version with no problems
MooreAJr said:
Wait, but I thought flashing an entire previous firmware resulted in hard-bricks because of Knox and its bootloader? I am not willing to try a flash of an old firmware if it risks bricking my device.
Click to expand...
Click to collapse
banccalif said:
You can flash any stock tar without hard bricking. I've went from 4.4.4 to 5.0 and back prior to running the latest Android version with no problems
Click to expand...
Click to collapse
Correct, all G900P firmware aboots allow for downgrading to any of them via Odin. As for the above process, even though there is no risk of permanent damage to your device it would help Everyone if someone with enough experience attempt it so that we can get accurate results. There is no point in someone with little experience trying it and doing it incorrectly then reporting back that it did not work.
banccalif said:
You can flash any stock tar without hard bricking. I've went from 4.4.4 to 5.0 and back prior to running the latest Android version with no problems
Click to expand...
Click to collapse
Alright, sounds good then. I'll give it all a go
muniz_ri said:
Correct, all G900P firmware aboots allow for downgrading to any of them via Odin. As for the above process, even though there is no risk of permanent damage to your device it would help Everyone if someone with enough experience attempt it so that we can get accurate results. There is no point in someone with little experience trying it and doing it incorrectly then reporting back that it did not work.
Click to expand...
Click to collapse
I can confirm that you guys method totally works! I always thought the process was simple enough but was worried about downgrading after reading about hard-bricks on the forums. I downgraded to stock firmware version G900PVPU1ANE5 and applied towelroot. I then followed your instructions and I am now rooted on OA6 with a 0x0 Knox counter. System status shows custom of course so no chance of an OTA update, but this method is awesome! Thank you!
Screenshots below...
MooreAJr said:
I can confirm that you guys method totally works! I always thought the process was simple enough but was worried about downgrading after reading about hard-bricks on the forums. I downgraded to stock firmware version G900PVPU1ANE5 and applied towelroot. I then followed your instructions and I am now rooted on OA6 with a 0x0 Knox counter. System status shows custom of course so no chance of an OTA update, but this method is awesome! Thank you!
Screenshots below...
Click to expand...
Click to collapse
Nice! I will find the name of the guy that theorized this would work and give proper kudos. Thx for testing!
No problem, anytime!
Excellent!!! Props to Bryanu and you for taking the risk! Thanks so much!!!
Sprint S5 Stock 4.4.2 ROM(towelroot rootable)
Is Here: http://www.rwilco12.com/Files/Devic...)/Stock ROMs/NE5/Original TAR/SM-G900P_NE5.7z
bads3ctor said:
Is Here: http://www.rwilco12.com/Files/Devic...)/Stock ROMs/NE5/Original TAR/SM-G900P_NE5.7z
Click to expand...
Click to collapse
What does this have to do with this thead?
muniz_ri said:
What does this have to do with this thead?
Click to expand...
Click to collapse
If you are on any Stock ROM above 4.4.2 and are unrooted, the only way to get rooted and still have Knox 0x0 is to downgrade to 4.4.2, root with Towelroot, and then do your flashes.
MooreAJr said:
I can confirm that you guys method totally works! I always thought the process was simple enough but was worried about downgrading after reading about hard-bricks on the forums. I downgraded to stock firmware version G900PVPU1ANE5 and applied towelroot. I then followed your instructions and I am now rooted on OA6 with a 0x0 Knox counter. System status shows custom of course so no chance of an OTA update, but this method is awesome! Thank you!
Click to expand...
Click to collapse
You might want to put this in OP so your thread is not filled with questions about how to go from an unrooted Stock Lollipop to a Knox 0x0 rooted Stock Lollipop.
Edit: I can verify that after downgrading from Stock Lollipop to 4.4.2 using the link in my post above does indeed downgrade with Knox still 0x0 as MooreAJr has stated in his post.
Null baseband, imei, etc. Tried flashing with 3 different roms via odin. I cannot connect it into abd mode when powered on, only via odin, otherwise I would try samsung tool pro or samfix.
download mode:
current binary samsung official
system status custom
knox warranty void 0
When booting it shows "custom" at the bottom with an unlocked padlock. despite searching for original firmware. I have flashed back to the nl1 (4.4.2) but I still get the custom logo, even after ticking nand erase and re partition while adding a pit file. Perhaps I should try to downgrade to the NC2 or upgrading to a new original? Does anyone have a link to the newest original? I searched for hrs. This phone has to be one of the least supported models out there. So far I have flahsed: n900aucudnL1, n900aucueoc2, and lastly N900AUCSEOC3_CL4335446_QB11749532_REV03. I have flashed a couple modem files as well.
Flashing a new original probably won't work as this is an efs issue. I thought about rooting and flashing a custom rom since sometimes they can restore the efs. This phone has many steps to root from the posts I found so if there's an update let me know, if not, I'll have to follow suit.
Any helpful ideas on repairing this would be appreciated. Thanks.
Root using Towelroot
Sent from my SM-N935F using Tapatalk
---------- Post added at 11:38 AM ---------- Previous post was at 11:35 AM ----------
What is your build number? If you are on Kitkat you can use towelroot and it doesnt involve alot of steps you load the apk click it and root is installed. Make sure you have busybox installed before installing towelroor. I would then find the correct version of Safestrap recovery.
Sent from my SM-N935F using Tapatalk
This is not the forum for your model .
Suggest the AT&T forum .
https://forum.xda-developers.com/galaxy-note-3