How to get your custom flash count to 0 to return your device for warranty.
I did this on p3110 jellybean 4.2.2
Should work on other versions as well.
Required: Root access, Triangle Away, Odin Mobile , stock recovery image
As you all know, to get root access you need to flash custom recovery which increases your flash counter. But you need root access to to get triangle away to work. If you have custom recovery, every time the device restarts it automatically counts customs flash to 1....
But as you know flashing samsung stuff will not count towards the flash counter
1. Restore your tablet to stock: http://forum.xda-developers.com/showthread.php?t=2283598
Now in your freshly stock device:
2. Root your device,
http://forum.xda-developers.com/showthread.php?t=1957160
This will increase your custom flash count.
3. Install Triangle away, Odin mobile.
4. Copy stock recovery image onto your device.
5. In Triangle Away, reset flash counter to 0. DO NOT REBOOT your device. At the moment your flash count is 0.
6. In Odin Mobile on your device, flash the stock recovery image. Your device is fully samsungified right now so flash counter will not increase everytime it reboots.
7. Odin mobile will automatically reboot once the flashing is done.
8. Your device will have a boot error which it will fix by itself (happened to me, not to sure it will happen to you)
Check your download mode on your device, it should say:
Custom Binary Download: No
Current Binary: SAMSUNG_OFFICIAL
I attached stock recovery image from Jellybean 4.2.2;
I tested it on Jellybean 4.1.2 it works as well.
Thank You.
Please rename ur thread as [GUIDE][HOW TO] RESET BINARY COUNTER
It seems more friendly and good otherwise people will mistaken u as a noob asking questions in development section seeing ur thread name.
Thanks for the guide.
Good guide. :good:
Can someone post recovery img for p3100, stock 4.1.2?
---------- Post added at 10:37 PM ---------- Previous post was at 10:35 PM ----------
You might forget to mention about unroot .
download rom e.g. from www.samsung-updates.com ; open the *.tar.md5 file and extract the recovery.img from there
If you are on Windows:
You can convert "recovery.img" by using Flashable-Recovery-Converter-P31XX-V1.7 into a flashable zip too (if you want to flash over CWM, PhilZ Touch or TWRP instead of MobileOdin).
Download and ectract trhe zip, put "recovery.img" into the same folder an run the "P31XX-flashable-recovery-converter.bat".
idhbar said:
Can someone post recovery img for p3100, stock 4.1.2?
---------- Post added at 10:37 PM ---------- Previous post was at 10:35 PM ----------
You might forget to mention about unroot .
Click to expand...
Click to collapse
Is this about unrooting or reseting the counter?
Think before you post.
Luigi2012SM64DS said:
Is this about unrooting or reseting the counter?
Think before you post.
Click to expand...
Click to collapse
Check out the first line of Op . It is all about get back the warrenty and unroot is the part of warrenty.
---------- Post added at 01:59 AM ---------- Previous post was at 01:34 AM ----------
I think you got your answer .
Related
Ok so i have been working on this for hours now. I have never rooted a my phone before and i decided to try. I rooted it no problem and set up a nandroid recovery with goomanager. Then i tried to enable hotspot using QBKing77's tutorial on youtube by adding custom files in the system folder. when i restarted i was stuck at the sprint yellow screen. I started recovery mode and tried to recover my previous back up. It did not work and i think it made things worse. Now my custom recovery is gone and i tried to install the original sprint rom in adin and it keeps failing at when i gets to nand write. I have no clue whats wrong. Is there any way to erase the entire phone are reinstall everything similar to a wipe and load on a computer?
We need a little more info, what software version were you on? MF9 MJA, MK2??? This is important because once you are on MJA or MK2 you cannot go back to the older versions because of the knox bootloader. The odin error you are reporting usually happens when you are trying to install an older than MJA version on an MJA or newer phone. Make sure you download either the MJA full tar file or the MK2 full tar file and try again. It's very important that you know what version you are on before you start installing mods, this is why your phone failed to boot after installing the hotspot mod.
TheHoboSlayer said:
Ok so i have been working on this for hours now. I have never rooted a my phone before and i decided to try. I rooted it no problem and set up a nandroid recovery with goomanager. Then i tried to enable hotspot using QBKing77's tutorial on youtube by adding custom files in the system folder. when i restarted i was stuck at the sprint yellow screen. I started recovery mode and tried to recover my previous back up. It did not work and i think it made things worse. Now my custom recovery is gone and i tried to install the original sprint rom in adin and it keeps failing at when i gets to nand write. I have no clue whats wrong. Is there any way to erase the entire phone are reinstall everything similar to a wipe and load on a computer?
Click to expand...
Click to collapse
i have the same issue, please if anyone can offer some guidance we'd both really appreciate it!
Thank you that was the issue. I downloaded the android 4.3 tar from samsung-updates.com and flashed the PIT files and it started back up.
TheHoboSlayer said:
Thank you that was the issue. I downloaded the android 4.3 tar from samsung-updates.com and flashed the PIT files and it started back up.
Click to expand...
Click to collapse
how do you flash the PIT files and where did you get them?
vcao333 said:
how do you flash the PIT files and where did you get them?
Click to expand...
Click to collapse
You may not need the pit file I would try it with out it first. This is where i got got my pit sxtpdevelopers . com /showthread.php?t=235
This is for the sprint galaxy s4 though. Don't use if you have a different carrier. Put the pit file in the in Odin in the pit tab and the Android 4.3 tar file in the pda tab. It should work then. Again I would try without the pit file first.
bootloop
I've also tried flashing for the first time, followed the ROM developers directions, and now I have a bootloop with the message at the top of the splash screen "Set binary bit: kernel".
Any guidance?
---------- Post added at 10:39 AM ---------- Previous post was at 10:34 AM ----------
The ROM I was installing is Stock(ish), but I can't post in that thread since it's a developer thread, and I'm a newbie on this site, so that's why I'm asking here.
same here.. please help
pcknox said:
I've also tried flashing for the first time, followed the ROM developers directions, and now I have a bootloop with the message at the top of the splash screen "Set binary bit: kernel".
Any guidance?
---------- Post added at 10:39 AM ---------- Previous post was at 10:34 AM ----------
The ROM I was installing is Stock(ish), but I can't post in that thread since it's a developer thread, and I'm a newbie on this site, so that's why I'm asking here.
Click to expand...
Click to collapse
i'm also getting the same thing when I turn my phone on and it keeps on rebooting please any1 out there help we would really appreciate it thanks in advance..
I've been looking so I could link you but I'm outta time! If you can still get to download mode you need a tar file of either mk2 or mja stock and then use Odin 3.07 and push it back in! Rooted or unrooted shouldn't matter but from what all I've seen and read this is about the only option you have!! Now this being if you were on mja or mk2 before you started!
Sent from my SCH-R970 using Tapatalk
---------- Post added at 01:38 AM ---------- Previous post was at 01:22 AM ----------
Try this thread for the tar file
http://forum.xda-developers.com/showthread.php?t=2509605
Sent from my SCH-R970 using Tapatalk
bignick1215 said:
I've been looking so I could link you but I'm outta time! If you can still get to download mode you need a tar file of either mk2 or mja stock and then use Odin 3.07 and push it back in! Rooted or unrooted shouldn't matter but from what all I've seen and read this is about the only option you have!! Now this being if you were on mja or mk2 before you started!
Sent from my SCH-R970 using Tapatalk
---------- Post added at 01:38 AM ---------- Previous post was at 01:22 AM ----------
Try this thread for the tar file
http://forum.xda-developers.com/showthread.php?t=2509605
Sent from my SCH-R970 using Tapatalk
Click to expand...
Click to collapse
thanks for your advice ill look into it, I believe I have done all your steps but I'll try again and look into the link you posted up thanks one again for your help..
bignick1215 said:
I've been looking so I could link you but I'm outta time! If you can still get to download mode you need a tar file of either mk2 or mja stock and then use Odin 3.07 and push it back in! Rooted or unrooted shouldn't matter but from what all I've seen and read this is about the only option you have!! Now this being if you were on mja or mk2 before you started!
Sent from my SCH-R970 using Tapatalk
---------- Post added at 01:38 AM ---------- Previous post was at 01:22 AM ----------
Try this thread for the tar file
http://forum.xda-developers.com/showthread.php?t=2509605
Sent from my SCH-R970 using Tapatalk
Click to expand...
Click to collapse
i fallowed the steps from the link and i was able to get out of reboot loop now im stuck with the Samsung logo and a blue light at the top of my phone any ideas thanks...
The blue light probably says rebooting recovery! If so this worked for me. Pull battery then boot into download mode press up to continue wait for a minute then pull battery and try to reboot!
Sent from my SCH-R970 using Tapatalk
bignick1215 said:
The blue light probably says rebooting recovery! If so this worked for me. Pull battery then boot into download mode press up to continue wait for a minute then pull battery and try to reboot!
Sent from my SCH-R970 using Tapatalk
Click to expand...
Click to collapse
i was able to get it working again, i downloaded the tar file from the link you put up and used odin to flash theni got stuck on the Samsung logo so i took the battery out and put it on recovery mode and did a factory reset and rebooted and it did the trick thanks alot. if this helps you or any1 else out there remember to give thumbs up.
Hi all....
Today i was trying to flash the latest firmware for my i9506 (I9506XXUBNA2).
All flashing went fine...until it reaches the "Hidden" partition.
So....a big FAIL appears.
I was facing the same problem when i flashed the France(Orange) 4.3 firmware but then the problem was solved by flashing Philz recovery and rebooted.
Now it doesn`t work anymore...it gets stuck at booting animation.
Any solution for this?Maybe a .pit file will solve the problem?
Thank you!
Problem solved!It wasn`t the partition table the problem.Even so...Odin still gives "FAIL" error when trying to flash "Hidden" partition.
The main problem when updating to 4.3 is the recovery partion wich is not flashed properly.
So...if you want to update to latest 4.3 (with no errors after booting, like Samsung Keboard FC`ing every 5 seconds) try this firmware, this Odin and this recovery!
So....at first...flast the attached firmware via Odin!
Uncheck the "Auto Reboot" box.
Odin will "FAIL" to flash "HIDDEN" partition!
Don`t worry....just press and keep the power+volume down buttons until the phone reboots again in download mode.
Reset Odin and again, uncheck the "Auto Reboot" box before flashing "recovery.tar.md5"
Flash "recovery.tar.md5" provided here!
After the recovery is flashed, first the boot must be in recovery mode!enter in recovery mode by pressing and keeping volume up and power button.
In recovery mode the phone automatically will flash something on your device!
After that....the phone will reboot!
That`s it!
I don`t know if this method will void the Knox warranty because i already have KNOX WARRANTY VOID : 0x1 so try at your own risk!
Moved here and OP please read the Forum Rules on posting, as this does not belong in the Dev Sections. Thanks
still with "samsung keyboard error"
hey man!
i've tried your procedure. i still got the keyboard stopped error. i used the odin, rom and recovery you have provided.
have you done re-partition? i havent done re-partition. maybe that could be the reason why i still had that error. do you have other solution for that?
---------- Post added at 09:30 PM ---------- Previous post was at 09:11 PM ----------
marbayn said:
hey man!
i've tried your procedure. i still got the keyboard stopped error. i used the odin, rom and recovery you have provided.
have you done re-partition? i havent done re-partition. maybe that could be the reason why i still had that error. do you have other solution for that?
Click to expand...
Click to collapse
im so sorry to what i have said this procedure doesnt work. this procedure is tested by me and it worked without keyboard error after reboot.
THE PROCEDURE MUST BE FOLLOWED RELIGIOUSLY!
NO AUTO REBOOT IS A MUST, YOUR VERY FIRST BOOT MUST BE IN "RECOVERY MODE"
---------- Post added at 09:36 PM ---------- Previous post was at 09:30 PM ----------
THANK YOU VERY MUCH "aresbv2000" !!!
YOUR PROCEDURE WORKED!
I failed because i didnt follow the whole procedure properly. now i realized how crucial tiny details is.
"NO AUTO REBOOT IN ODIN, THE VERY FIRST BOOT MUST BE IN RECOVERY MODE"
:laugh::good:
marbayn said:
hey man!
i've tried your procedure. i still got the keyboard stopped error. i used the odin, rom and recovery you have provided.
have you done re-partition? i havent done re-partition. maybe that could be the reason why i still had that error. do you have other solution for that?
---------- Post added at 09:30 PM ---------- Previous post was at 09:11 PM ----------
im so sorry to what i have said this procedure doesnt work. this procedure is tested by me and it worked without keyboard error after reboot.
THE PROCEDURE MUST BE FOLLOWED RELIGIOUSLY!
NO AUTO REBOOT IS A MUST, YOUR VERY FIRST BOOT MUST BE IN "RECOVERY MODE"
---------- Post added at 09:36 PM ---------- Previous post was at 09:30 PM ----------
THANK YOU VERY MUCH "aresbv2000" !!!
YOUR PROCEDURE WORKED!
I failed because i didnt follow the whole procedure properly. now i realized how crucial tiny details is.
"NO AUTO REBOOT IN ODIN, THE VERY FIRST BOOT MUST BE IN RECOVERY MODE"
:laugh::good:
Click to expand...
Click to collapse
I have tried the procedure but it doesn"t work. have you done re-partition when you flash recovery ?
souhail.beraich said:
I have tried the procedure but it doesn"t work. have you done re-partition when you flash recovery ?
Click to expand...
Click to collapse
Just try again and right after you flashed the recovery image reboot right away to recovery mode. Press volume up and power right away.
marbayn said:
Just try again and right after you flashed the recovery image reboot right away to recovery mode. Press volume up and power right away.
Click to expand...
Click to collapse
have you done re-partition when you flash recovery image ?
souhail.beraich said:
have you done re-partition when you flash recovery image ?
Click to expand...
Click to collapse
I did not tick re-partition.:good:
root won't stick
again you saved my ass! my samsung keyboard is now working!
next and only issue left is to make root stick! i downloaded "http://forum.xda-developers.com/showthread.php?t=2529064" and flashed via philz touch. i gain root on one boot only.. supersu is fcuked, wont block knox or install su binarys. but all apps gain root access except "es file explorer" which won't enable "root explorer". if i only soft reboot the root sticks.
anyone successfully rooted i9506 4.3?
I have one problem after this, my Wifi aint wokin, any idea on how to fix that ?
Celzeron said:
I have one problem after this, my Wifi aint wokin, any idea on how to fix that ?
Click to expand...
Click to collapse
Redid the operartion with the french Rom and it now seems to be working :good::good:
Thx a bunch for this post, i would have been fcuked without it :cyclops:
This post just saved my day
aresbv2000 said:
Problem solved!It wasn`t the partition table the problem.Even so...Odin still gives "FAIL" error when trying to flash "Hidden" partition.
The main problem when updating to 4.3 is the recovery partion wich is not flashed properly.
So...if you want to update to latest 4.3 (with no errors after booting, like Samsung Keboard FC`ing every 5 seconds) try this firmware, this Odin and this recovery!
So....at first...flast the attached firmware via Odin!
Uncheck the "Auto Reboot" box.
Odin will "FAIL" to flash "HIDDEN" partition!
Don`t worry....just press and keep the power+volume down buttons until the phone reboots again in download mode.
Reset Odin and again, uncheck the "Auto Reboot" box before flashing "recovery.tar.md5"
Flash "recovery.tar.md5" provided here!
After the recovery is flashed, first the boot must be in recovery mode!enter in recovery mode by pressing and keeping volume up and power button.
In recovery mode the phone automatically will flash something on your device!
After that....the phone will reboot!
That`s it!
I don`t know if this method will void the Knox warranty because i already have KNOX WARRANTY VOID : 0x1 so try at your own risk!
Click to expand...
Click to collapse
hi , please , can you post new link ?? thx
allal123 said:
hi , please , can you post new link ?? thx
Click to expand...
Click to collapse
Sorry mate...i do not own this phone anymore! I`ve had enough with this crappy Sam****! Now I have a Sony Xperia Z1 Compact! 10x better than Samsung! This is just my opinion....not a negative publicity! Have a nice day my friend!
this phone is not a crappy phone
here is the link where Our phone is so much alive.
http://forum.xda-developers.com/showthread.php?t=2597058
---------- Post added at 07:22 PM ---------- Previous post was at 07:17 PM ----------
its maturing here:
http://forum.xda-developers.com/showthread.php?t=2767448
Maybe is too late but will help to some other members.
Wanted to root mine i9506 so i must change build for proper root
I got same problem but mine case was 5.0.1 Lolipop ,Odin will fail flashing hidden part
Flashed with same version and country origin of mine phone.
After phone ON get some errors android process stoped bla bla bla
Factory reset with Vol UP + home + power and now all fine
I never used Odin for any of my phones before.. Nor have I used mobile Odin for anything.
Following advice from someone on here I bought mobile Odin BECAUSE I HAVE NO COMPUTER! I AM HOMELESS!
Now that I have that out of the way, you may see why I am very frustrated.
I have the step below firmware of the latest for my s4 rooted by towelroot.
In the past all you needed was root, then flashing recovery was easy! Rom manager would get you cwm and goomanager would get you twrp.
Why is it I read that if I flash that way I'll enter a ****ing bootloop?! I can't do that guys.. I have no way of recovering!
So do I flash or not? To hell with knox and warranty.. My best friend swears there is no way to revert knox once tripped and I WILL TRIP it no matter what.. And he also swears the sprint doesn't give a **** about it.. Especially if you pay for insurance.
What is really pissing me off.. All of these questions would have been so much easier to ask for SPECIFIC answers on an irc.. But good ****ing luck finding one that isn't just an idler fest.. Irc use to be so much more helpful for practically everything technical.
/rant
Please tell me if my fears are just!?
So you are rooted and just want to flash a recovery with mobile odin because you dont have a computer lol? It should work.. just make sure you use the latest version of philz recovery and download an Aosp ROM to keep a copy on both your external and internal storage so if your phone does bootloop then you can just flash a ROM from your custom recovery.
---------- Post added at 11:16 PM ---------- Previous post was at 11:08 PM ----------
Or flash the recovery with terminal emulator.
Hi guys.
Been trying for 3 days now to install TWRP / CWM recovery on my Galaxy Grand 2 SM-7105, running Android 4.3, but to no avail.
Here's what I did:
1- Using Odin I flashed root rom "CF-Auto-Root-ms01lte-ms01ltexx-smg7105" . I got PASS in Odin, (is this an indicator that the root is successful? Because if I entered Android after that, it seems unrooted from Flashify or root checker).
2- Without rebooting OR after rebooting the device, I run Odin again, and in download mode I flash the TWRP recovery.
3- Disconnect USB cable, remove battery, then boot into recovery, but I keep getting the message:
Could not do normal boot .
Odin mode
Current Binary: custom
System status: custom
No matter how many times I tried and how many method and Odin versions I used, the same result.
What could be wrong? How can I be sure that it is a problem in the installation of the root, and not in the installation of the recovery, or vice versa?
Appreciate your feedback !
Use my twrp
---------- Post added at 04:39 PM ---------- Previous post was at 04:38 PM ----------
And you need to have kitkat firmware installed
Hello everyone i just need help on my sm g7102,i tried flashing a custom recovery(cwm/twrp) but nothing happens through odin as my device says it cant do normal boot and go through download mode..i dont know what to do i tried all custom recoveries but it goes to the same problem. But luckily i have rooted my device, so the only thing to do is to have a custom recovery.
Happened to me to...dont panic...just take the battery out...2 to 3 times and try to go to download mode...then dont do anything just restart the device....best of luck and...dont use odin ...use flashify app for recovery flashing...hit like if helped
---------- Post added at 03:32 PM ---------- Previous post was at 03:30 PM ----------
Andt do this..
1. ) Switch off the phone
2.) GO TO DOWNLOAD MODE
3.) DOWNLOAD THE ORIGINAL RECOVERY OF GRAND 2 SM-7102 FORM GOOGLE
4.) FLASH IT VIA ODIN
5.) AND THEN TRY TO RESTART THE PHONE.
BEST OF LUCK
Maybe You are on JB.
Had this Problem before.
You need to be on KK
thanks to all of you i just fixed it i just flashed the cwm for KK version on odin and it works. thanks to all of you!