[Q] how can i change the modem with 4.4.2 ? - Galaxy Note 3 Q&A, Help & Troubleshooting

I have the new X-Note V 8.0, but the signal with the 4.4.2 is bad. How can i change the modem? I tried with odin but didn't work

Have a read around and find the modem you need, then flash it using the numerous guides around.

I have tried to flash 4.3 modem on Kitkat rom but it doesn't work for me(no signal, only wifi works). So be careful

me too
i flashed 4.3 modem on 4.4 2 times , then flashed NON-... ,
after that my phone for every restart command , restart for two times !!!!!!!!!!!!
and some times turning off itselfs !!!!!!
shi***

Related

[Q] S4 wi-fi not active after update

Hello, it is 1 month that I bought the s4.
Until recently, no problem,
but after upgrading from 4.2.2 to 4.3 gave me problems to wi-fi..
wi-fi does not active,
I press to activate, but not active.
I already tried to do the factory reset but nothing is not working
pleas help me....!
IM ITALIAN :crying:
Have you flashed any custom roms on your device? Also what version is your S4? (I9500,9505...)
Sent from my Galaxy S4 with 4.4 KitKat
Remove battery for one minute and insert it again, go into download mode, then flash your firmware again. If this will not help then you must flash wifi fix for your rom revision (it is simply modem files only). sometimes when flashing 4.3 modem files do not stick/flash thats why your wifi is not working, you can check if it is true in system info where modem version is shown, if it is different than flashed firmware... thats why wifi is not working).
If helped please click thanks
how do I flash the single file of wi-fi?
I already tried to flash with odin the original firmware but it does not work
how do I flash the single file of wi-fi? :fingers-crossed:
Risk Guarantee after flash modem file?
After I make a flash modem file,the risk of Guarante, my s4?
Kumardeepak95 said:
After I make a flash modem file,the risk of Guarante, my s4?
Click to expand...
Click to collapse
dude if u have gurantee and u aint voided just take it to them they will fix it

No Signal after 4.4.2 update

Hey Guys,
Today I updated my i9505 from Cynogen Mod 10.3.1 to the new "[AOSP] Official 4.4.2 - S4 Google Edition - Final-R1.1" by Jamal, but I read that you needed to update to the leaked 4.4.2 before flashing so that the modem and bits are upto date before flashing any 4.4.2 ROMs or else you could end up with no wifi after flashing.
So I followed these instructions to flash the leaked 4.4.2:
INSTRUCTIONS
- Extract (unzip) the firmware file
- Download Odin3 v3.09 (From here or here)
- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
- Connect phone and wait until you get a blue sign in Odin
- Add AP_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 to AP
- Add BL_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 to BL
- Add CP_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 to CP
- Add CSC_OXA_I9505OXAFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 to CSC
- Make sure re-partition is NOT ticked
- Click start button, sit back and wait a few minutes.
Which all went well but I couldn't get Wifi after flashing, and (probably not important) but the default language it choose during the setup was Dutch??? Seeing as I couldnt get the wifi to enable I decided to flash Philz Touch Recovery v6 and then put Jamal's "S4 Google Edition - Final-R1.1" by putting it onto the SD card and flashing through Philz recovery.
Flashing went without a problem.... only thing is now I cant get Vodafone (UK) signal 80% of the time, the other 20% I do get signal and can make calls, just seems strange as previously 80% I WOULD get signal!
Did I do something wrong? I had a really bad feeling that flashing the CP, BL and CSC has somehow messed things up......please help!
Same problem, bump.
ColdIce23 said:
Same problem, bump.
Click to expand...
Click to collapse
I just fixed the problem, ColdIce23, check your Baseband Version under Settings > About Device, I bet yours is still set to the original baseband version like mine was...
1) Re-Download the Baseband for the leaked 4.4.2 rom (Here)
2) Open Odin 3.09 and do the following:
Ok it worked.
If anyone else is having issues with the baseband not changing, do this.
Use Odin v3.04
Untick Autoreboot
Flash modem
Reboot once again into Download Mode using (Vol Down plus Home button combi)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
Click to expand...
Click to collapse
Now I have FULL SIGNAL! .....so far..... will report back once I have left work but this is a good sign as I had no signal what-so-ever 5 minutes ago!
Flasing a 4.4.2 Modem works well with the Kit Kat based roms. Two to choose from NA1 or NA5, depending on what bootloader your on flash the appropriate modem files.
I've got NA5 on the 4.4.2 GE Rom with Three and no signal issues as of yet.
treesmoker said:
I just fixed the problem, ColdIce23, check your Baseband Version under Settings > About Device, I bet yours is still set to the original baseband version like mine was...
1) Re-Download the Baseband for the leaked 4.4.2 rom (Here)
2) Open Odin 3.09 and do the following:
Now I have FULL SIGNAL! .....so far..... will report back once I have left work but this is a good sign as I had no signal what-so-ever 5 minutes ago!
Click to expand...
Click to collapse
My I9505 baseband version is I9505XXUFNA5. Is not it the updated one?
kamrul.auntu said:
My I9505 baseband version is I9505XXUFNA5. Is not it the updated one?
Click to expand...
Click to collapse
Yes you the latest baseband available.
treesmoker said:
Hey Guys,
Today I updated my i9505 from Cynogen Mod 10.3.1 to the new "[AOSP] Official 4.4.2 - S4 Google Edition - Final-R1.1" by Jamal, but I read that you needed to update to the leaked 4.4.2 before flashing so that the modem and bits are upto date before flashing any 4.4.2 ROMs or else you could end up with no wifi after flashing.
/QUOTE]
I think u missunderstood something. For the Kitkat Google Edition u do not have to flash the leak before. Its only for the Samsung Touchwiz Version of Kitkat
tapatalked by an Echoenian
Click to expand...
Click to collapse
nikzDHD said:
Flasing a 4.4.2 Modem works well with the Kit Kat based roms. Two to choose from NA1 or NA5, depending on what bootloader your on flash the appropriate modem files.
I've got NA5 on the 4.4.2 GE Rom with Three and no signal issues as of yet.
Click to expand...
Click to collapse
I flashed the NA5 modem which seems to have failed the first time round, as it didnt actually change the baseband version in settings. Since flashing a second time (when it actual flashed properly) I now have full signal...... but I have another problem now:
When I click the dailer and select a person to call, the screen goes black and I dont see/hear any indication that a call has initiated. I tried with my wife and her phone rings and she can answer the call, but my screen is still black with no sound....
I have tried wiping data / davlik / cache and installing the rom from scratch, but I still get the same issue?
UPDATE:
Right so I just flashed CM11 as a test, and still can't make calls, so obviously not a ROM fault..... does the BL, CP or CSC have anything to do with the making calls procress?
I've got a similar issue.
I've got a M919V running Jamal's 4.3 GPE rom, but after flashing Jamal's 4.4.2 GPE i get no signal. After going into settings and selecting network the signal lasts, but after the screen goes off signal is once again lost.
Is there a procedure to follow that will fix this? This is found when when flashing many 4.4 roms.
-Thanks
Well, I get signal when I'm near a cell tower...
No changes tho. Still same problem.
Hi guys,
I'm wondering if you have resolved your modem problems?
I flashed to Jamal's 4.4.2 version 1.2 and I don't have a signal now.
I flashed the modem to NA5 but styill no signal. Also I can't even check my CSC using *#1234# as "Mobile network not available"
Any suggestions?
Thanks.
Hi Duskin,
For me, I think it's releated to the phone itself as I got a screen replacement. I haven't solved the problem yet because I got to get back to the store where I got my screen replaced.
Sent from my LG-P880 using Tapatalk

Signal/connection lost on wakeup after kitkat update

I have I9505 international. After kitkat update i noticed Signal and connection lost on wakeup .I tried dozen 4.4.2 roms all are stock i flashed at least twice.when phone is idle for long time (eg when awake in the morning ) and i unlock the screen signal is present....BUT if i connect to internet i lose signal. Aeroplane mode does not help. Restarting get signal back again. I tried different 4.4.2 roms and modems with no help. Any help is appreciated.
I had this issue because Odin did not flash the modem correctly (kept the older one from previous ROM). Flashing it again helped. You can extract the modem.bin from the FW file and flash it via Odin directly. Verify the baseband version if it really flashed it, though. There seems to be some Odin bug and I found some threads explicitely advising to flash the modem twice.

[Q] I9500 installed 4.4.2, but modem stuck on 4.3, pls help?

Hi All,
I have a strange issue, I have upgraded my phone to kitkat(I9500XXUFNE4) thru odin, but the modem is missing and cause of that IMEI is showing as "null/null", so I tried flashing only modem from the zip file of I9500XXUFNE4 but didn't work, and now only way to get modem back on my phone is when I flash "GT-I9500_Modem_XXUEMJ8", the only problem with this is, if I tried to install Paranoid Android my modem again goes missing and even though I flash "GT-I9500_Modem_XXUEMJ8" thru odin still it doesn't, it's like only if I flash Samsung's official firmware then only flashing "GT-I9500_Modem_XXUEMJ8" will bring back my modem and IMEI#.
I should probably mention this also- previously I had installed leaked firmware of open asia "I9500XXUEMJ5_I9500ODDEMJ5_I9500DDUEMJ5_ODD", since then even though I update my phone via official Samsung's OTA or kies, it just updated my "AP" and "CSC, but I have to flash "GT-I9500_Modem_XXUEMJ8" in order to get back my modem.
Please help me, as I want to use my S4 with AOSP or AOKP based roms only.
P.S. I had three generations of Galaxy S series starting from I9000 and since those days I'm flashing my phone and using Custom roms.
~Androbot

:( How can I recover this i337m in 2019

I have lost the phone that has been working for ages. I am broke atm. Please help I need to use my phone. I was trying to get my radio to work again because I lost data a couple weeks back. So I have spent more time than I even should have for this trying to fix it.
I have run Odin 3.07 with
lineage-15.1-20190210-UNOFFICIAL-jfltexx
lineage-14.1-20190212-nightly-jfltexx-signed
and
open_gapps-arm-7.1-pico-20190209
I have wiped everything and tried 2 different system boards ;
from download mode I have
used I337MVLSGQB1_I337MOYAGQB1_I337MVLSGQB1_HOME.tar
to reload with nothing checked but F. Reset Time.
pulled out the cable then the battery.
went straght to recovery (system was going there already) to do first stage unpack with android and progress bar.
It said BAR and END
I went in back in after restart, and a full wipe.
And after a long wait .. the system very glitchy, slow like something was running in the background (modem ?) if I open the phone app it wont close and calls are silent. then resets over and over..
I have tried custom roms, and flashing latest modem and original ? Whats up ? anyone
PLEAESSEEE help soon .. I am going crazy cuz this is literally my only phone and I need to use it !!!!
Had an old system board and tried to replace it and ended up in the same place with the second board ?!?! what is going on !
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
I know your post was a while ago but you cannot use Odin to flash a custom ROM.
Are you flashing the latest stock ROM from sammobile.com or updato.com?
audit13 said:
I know your post was a while ago but you cannot use Odin to flash a custom ROM.
Are you flashing the latest stock ROM from sammobile.com or updato.com?
Click to expand...
Click to collapse
I ended up using the pixel experience rom. I am sure I have the wrong bootloader and modem for i337m though. It works with data when I reset network settings and re-enable. Data each reboot. For the longest time lineage 9505 ROMs worked until like Feb 5th I saw the data just fall use just fall off. I couldn't get chatr to work anymore. It was a nightmare I went to stock and , pitted the phone and it would only function until I added TWRP and tried a nougat rom or even with latest modem. Wifi was evn a problem. Now I am using like a lollipop bootloader with the green battery charging and modem isn't right. When I flash a different modem and bootloader in Odin and rip the battery and then cableit doesn't even change .
Wtf?
futiless said:
I ended up using the pixel experience rom. I am sure I have the wrong bootloader and modem for i337m though. It works with data when I reset network settings and re-enable. Data each reboot. For the longest time lineage 9505 ROMs worked until like Feb 5th I saw the data just fall use just fall off. I couldn't get chatr to work anymore. It was a nightmare I went to stock and , pitted the phone and it would only function until I added TWRP and tried a nougat rom or even with latest modem. Wifi was evn a problem. Now I am using like a lollipop bootloader with the green battery charging and modem isn't right. When I flash a different modem and bootloader in Odin and rip the battery and then cableit doesn't even change .
Wtf?
Click to expand...
Click to collapse
I'm not sure how you could flash the wrong bootloader unless it was flashed using TWRP or CWM. To confirm, boot into download mode to see the model # listed on the screen.
Are the modem and bootloader matched; i.e. the phone is running a 5.0 bootloader and modem? To easily ensure that both are matched, you can flash the latest stock ROM using Odin.
If the modem version is not changing after being flashed, it is possible that the internal memory is faulty.
audit13 said:
I'm not sure how you could flash the wrong bootloader unless it was flashed using TWRP or CWM. To confirm, boot into download mode to see the model # listed on the screen.
Are the modem and bootloader matched; i.e. the phone is running a 5.0 bootloader and modem? To easily ensure that both are matched, you can flash the latest stock ROM using Odin.
If the modem version is not changing after being flashed, it is possible that the internal memory is faulty.
Click to expand...
Click to collapse
Can you tell me what version the latest boot loader and modem is for Canadian i337m
I haven't had an s4 for a long time but it was running the latest OH1 firmware: https://updato.com/firmware-archive-select-model?record=8D5422F720B911E6949E0CC47A44B7B2

Categories

Resources