Database Users

Can Not even get into Download Mode

Initially i was able to get into Recovery Mode and was trap in Boot Loop but when i Flash a Rom from Dorky's with ODin 3 Even Boot Loop Goes away nothing appears except Black screen but can get into Download Mode
so tried another time with Odin 1.875 with some other Rom Odin first detected it and the when process Starts it gives error failed i restart process and nothing happens i took off the battery and replaced it and tried to get into Download Mode but nothing Happens:crying::crying::crying:
Galaxy Y s5360
Please help, u can help!!

xhizors111 said:
Initially i was able to get into Recovery Mode and was trap in Boot Loop but when i Flash a Rom from Dorky's with ODin 3 Even Boot Loop Goes away nothing appears except Black screen but can get into Download Mode
so tried another time with Odin 1.875 with some other Rom Odin first detected it and the when process Starts it gives error failed i restart process and nothing happens i took off the battery and replaced it and tried to get into Download Mode but nothing Happens:crying::crying::crying:
Galaxy Y s5360
Please help, u can help!!
Click to expand...
Click to collapse
Start calm.
All you need is a cool mind now.
Search for the USB JIGGS available on xda and see if someone from your area has it. You can then take help from that person. If not then just go to service center, tell them that it stuck like this while doing software update and act like you no nothing about rooting our flashing. That will do.
A Hero Can Be Anyone. GENERAL HELP THREAD

Is is still repairable
Bruce Wayne said:
Start calm.
All you need is a cool mind now.
Search for the USB JIGGS available on xda and see if someone from your area has it. You can then take help from that person. If not then just go to service center, tell them that it stuck like this while doing software update and act like you no nothing about rooting our flashing. That will do.
A Hero Can Be Anyone. GENERAL HELP THREAD
Click to expand...
Click to collapse
I am not thinking to use a jigg as even after i get into Download mode incase after jigg i would definately make situation more worse
is it repairable, when i connect it with Cable i can see it is searching for drivers so its not completely gone i guess,
will service center guys will able to repair it??

xhizors111 said:
I am not thinking to use a jigg as even after i get into Download mode incase after jigg i would definately make situation more worse
is it repairable, when i connect it with Cable i can see it is searching for drivers so its not completely gone i guess,
will service center guys will able to repair it??
Click to expand...
Click to collapse
Yes, offcouse.
Just let them be unaware of you knowing about root/cwm etc. just act dumb. If they get to know your warranty is already void, they will charge you money for repairing it.

Follow what bruce says..
Tell them u got an update in kies nd this happened
** rooting is new for me,
nd i am a noob to root....**

They said Board is damaged
They are saying board is damaged!
price to repair it is more than its second hand value in market
i took it from their and brought it home
i remember before giving them when i connect usb cable to it unknown device found is detected but now its not even showing that
i am developer guy so not a completely noob
i want to repair it not to replace its body parts
can someone help
please!

Please anyone!!
or do refer any book!

xhizors111 said:
They are saying board is damaged!
price to repair it is more than its second hand value in market
i took it from their and brought it home
i remember before giving them when i connect usb cable to it unknown device found is detected but now its not even showing that
i am developer guy so not a completely noob
i want to repair it not to replace its body parts
can someone help
please!
Click to expand...
Click to collapse
The last 'n' only hope left is this:-
Install ur phone specific driver on pc.
1. Take out battery, sim & sd card.
2. Open odin.exe on pc.
3. After this, connect the phone via USB cable to PC(yes! without battery,sim & sd card)
4. Press the download mode combo keys.
5. While keep pressing all those keys, insert the battery now.
6. Now, odin should detect ur phone so that u may get it updated with stock firmware.
And if this also doesn't work, then bro u might have lost it at all
Sent Via XDA™ Premium

Device not turning on ... with NO WHITE LED to program

My Moto Defy will not turn on ... Bad situation.. i need to get my phone up and running by monday please help
I know there has been many cases like this before and i just spent 2 hours looking in all these known case... tried what worked for others and i still has no luck in getting my device to turn on.
All i know its not a battery related problem ... i got 2 bats and they both have over 70% juice.
there is a post on youtube ... http://www.youtube.com/watch?v=FoVBV-njUOw
My situation is the same as his .. but his rsd lite is able to detect his defy....
now i was thinking that i recently formatted my pc .. and all drivers are gone and i did not use rsd after that ... so no drivers were installed for it to detect the defy ... then re installed the MOTO DRIVERS but still no luck ????
Any thoughts of what i can try to fix this next

ibtihaaz said:
My Moto Defy will not turn on ... Bad situation.. i need to get my phone up and running by monday please help
I know there has been many cases like this before and i just spent 2 hours looking in all these known case... tried what worked for others and i still has no luck in getting my device to turn on.
All i know its not a battery related problem ... i got 2 bats and they both have over 70% juice.
there is a post on youtube ... http://www.youtube.com/watch?v=FoVBV-njUOw
My situation is the same as his .. but his rsd lite is able to detect his defy....
now i was thinking that i recently formatted my pc .. and all drivers are gone and i did not use rsd after that ... so no drivers were installed for it to detect the defy ... then re installed the MOTO DRIVERS but still no luck ????
Any thoughts of what i can try to fix this next
Click to expand...
Click to collapse
Mainly can be a Drivers Problem.
Sometimes the ROMs can have a Bug, in the case of some 10.1 ROMs, this is precicelly the bug, if the phone is discharged completelly the cell is not turning on anymore. I was lucky, because i was ussing iLLusion Rom on my DEFY+ when it happened to me and i lett the phone plugged to AC power and after a couple of hours it turning on. after this i don`t let it down at all...
Not at all the people that make it this, it worked as sollution. i hope you have luck.
(Sorry my Bad English, im Beginner on 2nd Language)

I cannot See boot loader to program
Anarkista7 said:
Mainly can be a Drivers Problem.
Sometimes the ROMs can have a Bug, in the case of some 10.1 ROMs, this is precicelly the bug, if the phone is discharged completelly the cell is not turning on anymore. I was lucky, because i was ussing iLLusion Rom on my DEFY+ when it happened to me and i lett the phone plugged to AC power and after a couple of hours it turning on. after this i don`t let it down at all...
Not at all the people that make it this, it worked as sollution. i hope you have luck.
(Sorry my Bad English, im Beginner on 2nd Language)
Click to expand...
Click to collapse
I thank you for replying ... But the issue is not low battery here ... i have a universal charger and i charged the battery ...
the problem here is that my DEFY is bricked .... The screen is not turning on ... i cannot get to boot loader and my PC/RSD LITE is not detecting the device ..
when i press the power+vol up button nothin happens but after a while the device gets a bit warm !!!!
Someone Else

ibtihaaz said:
I thank you for replying ... But the issue is not low battery here ... i have a universal charger and i charged the battery ...
the problem here is that my DEFY is bricked .... The screen is not turning on ... i cannot get to boot loader and my PC/RSD LITE is not detecting the device ..
when i press the power+vol up button nothin happens but after a while the device gets a bit warm !!!!
Someone Else
Click to expand...
Click to collapse
Hey,
have u installed the Drivers only or the Motorola Device Manager?
Your phone show really nothing after u press vol+ and power? It's really rare that this happen.

Try going to an unofficial service center, to get your device j-tagged (google it), they will restore your fully working bootloader.
Sent from my HTC HD2 using xda app-developers app

lolerpro8 said:
Try going to an unofficial service center, to get your device j-tagged (google it), they will restore your fully working bootloader.
Sent from my HTC HD2 using xda app-developers app
Click to expand...
Click to collapse
u mean something like this

AnTerNoZ said:
Hey,
have u installed the Drivers only or the Motorola Device Manager?
Your phone show really nothing after u press vol+ and power? It's really rare that this happen.
Click to expand...
Click to collapse
Thanks for reply
I have an .msi driver package 5.7 sumthin and it does not install the device manager ... i have always used this package never had any probs though.
Yeah i was completely shocked ... i mean it was working so nice and i just took off the battery to change my sd card and just then it will never boot ...
nothin happens when i press those buttons ... it just shows a white Led after 5-10 secs when i plugged it to pc.
lolerpro8 said:
Try going to an unofficial service center, to get your device j-tagged (google it), they will restore your fully working bootloader.
Thanks man for reply,
i will look into this ..
Sent from my HTC HD2 using xda app-developers app
Click to expand...
Click to collapse
AnTerNoZ said:
u mean something like this
Click to expand...
Click to collapse
Thanks for providing the link
What do you guys think is wrong with my device ???

ibtihaaz said:
Thanks for reply
I have an .msi driver package 5.7 sumthin and it does not install the device manager ... i have always used this package never had any probs though.
Yeah i was completely shocked ... i mean it was working so nice and i just took off the battery to change my sd card and just then it will never boot ...
nothin happens when i press those buttons ... it just shows a white Led after 5-10 secs when i plugged it to pc.
Thanks for providing the link
What do you guys think is wrong with my device ???
Click to expand...
Click to collapse
Probably corupted bootloader..

ibtihaaz said:
What do you guys think is wrong with my device ???
Click to expand...
Click to collapse
Install this, may it work better than the msi pack, sending the device to a service center is last thing i would do.
Have u try following: plug the device without battery to the pc and hold vol+ and power down at the same time.
it should boot in bootloader and show that battery is needed if u insert the battery after that u could programm it.

no luck
AnTerNoZ said:
Install this, may it work better than the msi pack, sending the device to a service center is last thing i would do.
Have u try following: plug the device without battery to the pc and hold vol+ and power down at the same time.
it should boot in bootloader and show that battery is needed if u insert the battery after that u could programm it.
Click to expand...
Click to collapse
Just after you posted this ..i started to try this solution .. and its not working .... if i plug the usb cable without the battery the white led just flashes for less than 1 sec . like a millisecond .... then nothing .. even if i try the vol+ power ...
i remember now trying SWAPPER2 yesterday and since then this happened .. OMG ...

After u enabled it, u change location of swap file? If I enabled it and choose my third sdcard partition with swap partition the system gets really laggy, always reported it. Maybe ur choose wrong path and let swapper format boot partition?

must be
AnTerNoZ said:
After u enabled it, u change location of swap file? If I enabled it and choose my third sdcard partition with swap partition the system gets really laggy, always reported it. Maybe ur choose wrong path and let swapper format boot partition?
Click to expand...
Click to collapse
Well all my thoughts are going towards that now .. maybe that is the problem ...
because before applying swap i was looking for infos about the swap partition directory ... will it be what is default when i installed the app like ... dev/block/mmcblk0p1 ... or should i change it too mmcblk1p3 ... but i could not get any infos for defy.. so i tried with the default one it didnt work .. then i tried with the one i thought would be the right directory ... it worked .. though after i type free in terminal .. it was saying 508 kb when the created swap was suppose to a 256mb partition ... but the phone was ok and working .. then i switched it off to replace sd .. but KAPUT
So i beleive there is no way of recovery boot partition then ????

mmcblk1p3 is some partition in the phone not on sdcard there is the problem, mmcblk0p3 is third partition if sdcard! Ur last chance I think is really the service center
---------- Post added at 08:20 PM ---------- Previous post was at 08:16 PM ----------
Yea after I looked what mmcblk1p3 contains, it really seams that u blown ur bootloader ur can't recover it, last chance is service center
Even with self made factory cable I think it wouldn't be recognized from PC

not looking good
AnTerNoZ said:
mmcblk1p3 is some partition in the phone not on sdcard there is the problem, mmcblk0p3 is third partition if sdcard! Ur last chance I think is really the service center
---------- Post added at 08:20 PM ---------- Previous post was at 08:16 PM ----------
Yea after I looked what mmcblk1p3 contains, it really seams that u blown ur bootloader ur can't recover it, last chance is service center
Even with self made factory cable I think it wouldn't be recognized from PC
Click to expand...
Click to collapse
Well i really appreciate the help mate ... at least now i know where i stand...
very stupid of ... after using defy for so long ... now i ruined it ...

ibtihaaz said:
Well i really appreciate the help mate ... at least now i know where i stand...
very stupid of ... after using defy for so long ... now i ruined it ...
Click to expand...
Click to collapse
The service center may can get it back to live.

Lenovo A3500-HV Bricked while flashing ROM ( Cable disconnected )

OS : Windows 8.1 (With drivers successfully installed ) X64
Also tried on Windows 7 (With drivers successfully installed ) X86
Using SP flash tool
The device had this ROM : A3500HV_A442_01_37_140920_ROW
and it is the same I was trying to flash
Hi all , My lenovo A3500-HV went crazy and I had to re-install the rom ..
but while flashing using SP ( all drivers are OK ) the goddamn cable disconnected at about 15% - 20% from total progress
CURRENT STATE :
DEAD :'(
can't power up , nothing happens after pressing power button
can't go into recovery mode or download mode ( nothing happens when pressing VOL UP & Power , VOL UP & DOWN & Power or any other sequence )
it is not charging when I put it on the charger or the USB
is not being recognized when I plug it in ( see attachments please ) !!
device manager screen shot attached please have a look
-----
any hope it can revive ?? , how ??
or just go to the warranty ( really few days left ) .. note that it was rooted device .. ( ( will they ever detect the root if the device is dead ? ) )​

up

up

Help my update
ebram96 said:
up
Click to expand...
Click to collapse
I Have same problem. Did you have ANY SOLVE ?:angel:

I have same problem too,,Did you find any solution??

p.m.6 said:
I have same problem too,,Did you find any solution??
Click to expand...
Click to collapse
Look the device was stuck at boot but showing nothing on screen .. so I waited till it has 0% battery and re-flashed the rom successfully .. if you still having problems text me I may help

i have the samy problem
i have the same problem but i dont know how to fix it

ebram96 said:
Look the device was stuck at boot but showing nothing on screen .. so I waited till it has 0% battery and re-flashed the rom successfully .. if you still having problems text me I may help
Click to expand...
Click to collapse
is it really works? but i cant even see the screen backlight is turned on. was it the same with yours? how would you know when the battery level is 0%?
then after (we believe) the battery level is 0% you just connect your tab to your computer to make it show up with COM X connection, correct?
hope it really works and not a coincident (':

kakung said:
is it really works? but i cant even see the screen backlight is turned on. was it the same with yours? how would you know when the battery level is 0%?
then after (we believe) the battery level is 0% you just connect your tab to your computer to make it show up with COM X connection, correct?
hope it really works and not a coincident (':
Click to expand...
Click to collapse
YES , the tab backlight was off and there was not any sign of it working and then I lost hope and left it for a while and then I tried the charger and it was recharging so I tried flashing and it worked just fine

Lenovo A3500 bricked, "USB device not recognized"
ebram96 said:
YES , the tab backlight was off and there was not any sign of it working and then I lost hope and left it for a while and then I tried the charger and it was recharging so I tried flashing and it worked just fine
Click to expand...
Click to collapse
Lenovo A3500FL_A422 bricked, "USB device not recognized" when connected to windows, could not flash it using SP Flash Tool.
After disconnected the battery, flash process begun and was OK.
Thanks !

i have the same problem as yours
after i disconnect battry and flash rom it gets error while flashing on 20%
what should i do ?
:crying:
error : S_FT_DOWNLOAD_FAILD (4008)

arshiyah53 said:
i have the same problem as yours
after i disconnect battry and flash rom it gets error while flashing on 20%
what should i do ?
:crying:
error : S_FT_DOWNLOAD_FAILD (4008)
Click to expand...
Click to collapse
i'm manage to get on 40%
but it stuck in that.
error : S_FT_DOWNLOAD_FAILD (4008)
show up.
change the cable, change pc to laptop,
noting happen.
any sugestion?

Yu yureka Charging issues

I updated my yureka to cm12.1 from the OTA i recieved. For a week it worked just fine . But lately i am facing a major issue with my phone , the device wont charge at all . Firstly it wont charge , and even if does , by chance it charges to 50-60% and starts to come down even if the charger is on . I need help regarding this issue . I have to constantly keep my device plugged in to the charger to keep it running .. Pls help .. I have no root access ..

Maybe your charging pin is loose.

same problem here friend. how did you fixed the issue plz advice me @ankur1296

just change the charging cable

Try to change your USB...problem lies in USB cable
Sent from my AO5510 using Tapatalk

ankur1296 said:
I updated my yureka to cm12.1 from the OTA i recieved. For a week it worked just fine . But lately i am facing a major issue with my phone , the device wont charge at all . Firstly it wont charge , and even if does , by chance it charges to 50-60% and starts to come down even if the charger is on . I need help regarding this issue . I have to constantly keep my device plugged in to the charger to keep it running .. Pls help .. I have no root access ..
Click to expand...
Click to collapse
Try flashing any Custom ROM. If it didn't work, try to use another charger or replace your device.

galaxy grand 2 g7102 wont turn on or charge or enter too boot mode

i have tried to install new 4.4.2 rom using odin but an error appear on the odin and the phone freeze, i restart my phone but its dead now , ihave tried many ways to turn it on but no way please help me .

abedkadid said:
i have tried to install new 4.4.2 rom using odin but an error appear on the odin and the phone freeze, i restart my phone but its dead now , ihave tried many ways to turn it on but no way please help me .
Click to expand...
Click to collapse
even download mode dont work?

NYT_RootComm said:
even download mode dont work?
Click to expand...
Click to collapse
yes even download mode not work and the not charging

abedkadid said:
yes even download mode not work and the not charging
Click to expand...
Click to collapse
its hardbbricked bro

abedkadid said:
i have tried to install new 4.4.2 rom using odin but an error appear on the odin and the phone freeze, i restart my phone but its dead now , ihave tried many ways to turn it on but no way please help me .
Click to expand...
Click to collapse
Get yourself a USB JIG if you can't afford a new mobo.
Although I have (thanks God the gracious) never bricked my Grand 2, rumor has it that a JIG repair has been done before (by @aapav01 on his Grand 2).

it's the same situation, I try on samsung service center but they said the problem on the motherboard,