For a while now, my Wizard's touch screen would only work when the slider was closed. It would be completely unresponsive when it was opened. Now the touch screen has stopped working all together.
Is there any way to fix this? Does anyone know what would cause this?
touch screen unresponsive
works just fine in vertical
works for a couple of seconds in horizontal to.
fix?
(had original 2.26 TMOB NL ROM and now using 1.05 Button- dosnt seem to be that)
issues seems solved
ok... been doing a lot of reading in the last 2 days
and found a solution that said:
clean the border between the screen and the plastic housing with a business card or such, get the dirt out.
didnt think it was the problem i had, but i found no other solutions- tried it- and it works... screen seems oki-dok again....
so, good luck to who ever else runs into this....
and keep u posted if it comes back.
You are life saver (actually my Wizard should say that). I have done many things in the last week or so... massaged the screen, reflashed few times, checked for loose connections and nothing seems to be working. Until this idea to clean the dirt. I was skeptical at first, but now:
THANK YOU, THANK YOU, THANK YOU!!!!
Works perfect.
hi there. i have the same problem with the touch screen. i tried to clean the dust with the plastic card but it's not working. what should i do?? i need help
p.s. i also had a problem when my wizard was opened, my touch screen didnt work. Now the touch screen has stopped working all together.
I have also ran into the same problem, except that my touch screen works only about 10% of the time. I have tried to clean the border without any luck.
Lol, this needs stickied in every topic here. I have the excuse of having no internet access till today, but my wing touchscreen died on me. I called t-mobile multiple times, including their direct buisness support line. Assurion wanted $110 for a replacement phone. My account is only 40 days old. So I got transfered to retentions and have a replacement wing in the mail already. Gave the retentions rep a kudos for resolving my issue without me having to take the 110 bucks to sprint to get a mogul and faster interwebs. Thanks guys!
Guys,
Need some help here. A couple of days ago I spilled some water on the navigation buttons on the lower part of my Hermes that was working ok just fine for the last 8 months. Cleaned it up with a towel and everything looked ok for another 3-4 hours when the touch screen graduatelly stopped responding, now is dead. I took everything apart and cleaned all the connectors however I still have the same problem, no improvement of any kind.
I've seen in the forum that some other people had this issue, what I am curios is to hear if anyone was able to fix it. Thinking of replacing the digitizer/lcd..will this fix the problem or there is some other screen driver chip that may be damaged?
Thanks
The top part of my phone does not respond to touch anymore... it is impossible to bring down the notification bar... and once in a while the whole screen goes unresponsive.. tried factory reset but still the same problem..
am having the same problem since 2 days back
after reading some of the posts i found that the Digitizer For HTC G6 Legend A6363 should be replaced with new one i ordered mine from ebay
ebay.com/sch/i.html?_from=R40&_trksid=p5039.m570.l1313&_nkw=Digitizer+For+HTC+G6+Legend+A6363&_sacat=See-All-Categories
waiting for the item to be delivered
I've also got a touchscreen issue: the area of the notification power widgets is unresponsive... the rest of the screen works fine, but I don't know for how long :/
nnssxx said:
I've also got a touchscreen issue: the area of the notification power widgets is unresponsive... the rest of the screen works fine, but I don't know for how long :/
Click to expand...
Click to collapse
Do you have widgetlocker, by any chance ?
Or a lockscreen replacement which disable the notification bar during the "slide to unlock" state ?
I didn't know there was such thing as widgetlocker. I use CM7 latest nightly, never seen that thing.
I also facing this problem from last 2 weeks and i also think this is digitizer problem. If anyone else found the solution else changing the digitizer, then please post.
This is beautiful phone but htc added a poor quality things in it, due to which many users facing such problems.
Nah.. I dont think its because of widget locker.. its the digitizer..
well that's a shame, gotta buy a new digitizer on ebay after just over 1 year of use...
I know.. this sucks... Im planning to upgrade though.. Any of u guys have any suggestion?
Depends on your carrier if you want suggestions for an upgrade.
...but that would drive the post off-topic.
Sent from my HTC Legend using XDA App
I have the same problem. my screen doesnt work anymore because some water got in from the grill above the screen :S
should I try to take apart and dry off or shall I buy a new digitizer directly?
I think it may be a good idea to try disconnecting your digitizer and reconnect it as it just might be helping. I did it on my girlfriends legend and it has been working perfectly ever since. Maybe a good idea to at least try that before buying a new one. So i guess it could be in the connector to? At least this worked for me.
My touch screen dosent work at times. but after rebooting the phone the problem becomes solved. But the problem comes again after a week or so. Any suggestions guys??
Earayil said:
My touch screen dosent work at times. but after rebooting the phone the problem becomes solved. But the problem comes again after a week or so. Any suggestions guys??
Click to expand...
Click to collapse
I also have this problem, but if I wait a couple of minutes the touchscreen
becomes responsive again. Half of the screen works when it's unresponsive (right half of the notification bar and down). It's quite annoying but I cannot afford a new phone at the moment.
I'm also wondering if this might be temperature related, this problem reoccurred very often during the summer but stopped during the winter. But now (spring) it's back again.
My problem got worse and the phone became totally unresponsive, changed it, got a new phone.
Tanayar said:
I also have this problem, but if I wait a couple of minutes the touchscreen
becomes responsive again. Half of the screen works when it's unresponsive (right half of the notification bar and down). It's quite annoying but I cannot afford a new phone at the moment.
I'm also wondering if this might be temperature related, this problem reoccurred very often during the summer but stopped during the winter. But now (spring) it's back again.
Click to expand...
Click to collapse
exact same problem here, mine works when it feels like working, totally random, I simply can't understand why, I doubt it's the temperature... I think its in the device theres something wrong, I smack it numerous time and it works right after a big smack on the screen, or rub your whole hands on the screen, also, the angle you are holding the phone affects this problem, if none of these work, a phone restart always makes it work at the beginning. Oh boy did my phone took and taking much beating... oh well, I wish I could permanatly fixed the problem here, as I was thinking of handing the phone to my brother when I upgrade, I'm using CM 6.1.
I still recommend the same thing that i posted earlier here, her screen still works perfect.
I had the same problem few months ago. The problem is with the touch digitizer. I bought a digitizer on ebay and replaced it myself. After that my phone has been working fine. Its not that hard to replace it if you have a small knowledge about hardware.
I use to get that unresponsive screen issue only in the summertime, plus it gets worse if I add humidity (read: sweat). I just need to give it some time then to dry off/ cool down outside my pocket, and it's all fine again.
Hey fellas ,
I cracked the screen of my Nexus 4 and installed a replacement.
It's been approximately a month now.
Sometimes when i restart the device the touchscreen doesn't work and i have to restart it again and again until it starts to work. I noticed that when i put one of my fingers anywhere on the touchscreen (around the display not the bezels) , it starts to work and recognizes only one finger whereas i have two on the display , when i remove one the touchscreen doesn't work again. So , i have to restart sometimes just once sometimes a lot of times to get it to work.
I have intricate knowledge of the touchscreens and how they work but i can't put my finger on this problem. It looks like a capacitance issue because when i put two fingers it recognizes one , sometimes it needs 3-4 fingers on the screen to recognize only one.
My original one still works but has a bad lcd (colors are all messed up) because my clumsy attempt to repair it resulted in failure , i tried it and the original one works without a hitch. The only thing i haven't tried is to remove the battery. I installed everything when the battery was still on , the screws are too flat for any of my screwdrivers. But i hotplugged the original one and it worked. So , that's probably not the problem. I just shut it down with 3 of my fingers on the screen. Waited for it cool down and then reopened it , it worked. Whether this is a thermal issue or not , it needs further testing on my part. I'm currently not willing to find out because i just had to restart 5-6 times to get it to work and i need it to work constantly for the next couple of days.
I can't return this because i already got a full refund and the seller didn'T ask for a return , he said to keep it. He advertised it as genuine but it was aftermarket. So , this assembly was free folks. I broke it and got away with it. We gotta get this working without any problems so i can sell it when nexus 6 comes out.
disconnect touch,power on phone without touch,disconnect battery.After that connect touch and power on your phone:good::good::good:
same problem here...
And I see the problem at a lot of other forums too... no sollution... have you found a workaround?
I'm too late to ask for a refund...
Hello all, I've got an odd situation I felt like sharing and I'm hoping for advice. I've got a J320A, not rooted. About a year ago got a black screen, touch works but no display. Tried all solutions short of getting a new screen but no luck so it was chucked aside. Was getting rid of some stuff recently and found it, removed cracked screen protector, put it to charge and it came on, worked flawlessly for 3 days and now back to same situation. Anyone can share any insight on this? Never seen it happen before.