Related
I truly need the community's help on this one. Trying to fix a rom that I was using, I decided to wipe everything to reflash it. However, some how I read the thread wrong. Using TWRP, I formatted the "internal storage" thinking that was going to fix my Rom problems.
Now, I can't boot into the Rom or any rom, unless I wipe everything and restore one of my back ups. I restored a back up and it booted, but my data is jacked and phone service is not operable. I thought maybe a reboot will fix it, and now my phone is stuck at "Samsung Galaxy S 4". It doesn't move from there.
What should I do? How do I get it it continue the boot into the rom after a regular reboot? How do I get my radio back?
It's funny to me because I usually never get this careless with my phone. So I can laugh about it but damn I have to figure this one out!
Please help!!!!!!!!!!!!!!!!!
I am by know means an expert but I think you may have to start here with the firmware files then try and flash your backup http://forum.xda-developers.com/showthread.php?t=2338919
Sent from my SPH-L720 using Tapatalk 4
Thanks Chief, let me try that!
Thanks Chief. Unfortunately, that didn't work. I used Odin to flash the Firmware files and let it reboot. I'm still stuck at the Samsung Gal...boot screen. Let me try manually going into recovery and restoring.
Any other ideas? Anyone?
Kenjari said:
Thanks Chief. Unfortunately, that didn't work. I used Odin to flash the Firmware files and let it reboot. I'm still stuck at the Samsung Gal...boot screen. Let me try manually going into recovery and restoring.
Any other ideas? Anyone?
Click to expand...
Click to collapse
Have you tried flashing the complete odin ROM? You can find the all in one somewhere on the dev thread, it has rom, kernel, firmware and the rom all in one as it came from samsung. That should take care of your problem. It will wipe everything, or I think there was also a thread somewhere with odin flashables that didn't wipe data or internal sd but I can't seem to find it right now.
ifly4vamerica said:
Have you tried flashing the complete odin ROM? You can find the all in one somewhere on the dev thread, it has rom, kernel, firmware and the rom all in one as it came from samsung. That should take care of your problem. It will wipe everything, or I think there was also a thread somewhere with odin flashables that didn't wipe data or internal sd but I can't seem to find it right now.
Click to expand...
Click to collapse
Exactly. I'm on the target. I'm currently waiting for this tar that will unroot the phone. It is MDL but I will update and reroot. I hope this does the ticket. I'm going to use Odin to flash it or unroot.
Well strike two. That didn't work either. I downloaded a unrooted MDL tar and connected to Odin. When through the entire process and it rebooted. It still is stuck at "Samsung Galaxy S4".
I read on the Nexus 7 that I might have to reflash a system.img and boot.img? Someone else had a similar experience on the N7 and had to download it via flashdrive and then install via recovery. I'm not saying that's the case but I wonder if I need to reflash a boot.img or something.
Please help. Not sure where to go at this point. Unrooting didn't help.
Try downloading this file extract the tar and flash that in PC Odin. (don't check repartion!).
That is the full stock MF9 firmware, boot, recovery, kernel and ROM.
Then maybe use CF Autoroot, then goomanger to get twrp and flash one of your nand's
Progress made.
leaderbuilder said:
Try downloading this file extract the tar and flash that in PC Odin. (don't check repartion!).
That is the full stock MF9 firmware, boot, recovery, kernel and ROM.
Then maybe use CF Autoroot, then goomanger to get twrp and flash one of your nand's
Click to expand...
Click to collapse
leader, chief, ifly4,...I'm making progress.
leader, actually I flashed a previous version, the MDL via Odin. At first it didn't boot as stated in my previous post. I decided to wipe and factory reset. """"Bingo"""" it booted. Now I'm on MDL and unrooted. However, I transferred my phone over to a previous device so I can't update profile and prl. I'm going to activate the phone and see if it works. For some reason I can't can't seem to get a radio signal on it. It shows the be O with the slash in the middle. This is what it looked like before I deactivated it and lost everything before.
I post back with results. Not quite solved yet.
Thanks leader and everyone else.
Sound like your on the wrong firmware/baseband. what does your modem/baseband say?
Yeeessssss
leaderbuilder said:
Sound like your on the wrong firmware/baseband. what does your modem/baseband say?
Click to expand...
Click to collapse
It says L720VPUAMDL. I actually got it going. I had to change it from WCDMA to CDMA and reset. Now I'm unrooted. and going. However, leader, is there away to update the modem/baseband before I root? Or should I root then flash the MF9 Modem?
if you got MDL to activate you can jst take the OTA update to MF9. It will update it all.
Then use CF-Autoroot to gain root. After that same - install goomanager from Playstore and use it to install TWRP.
leaderbuilder said:
if you got MDL to activate you can jst take the OTA update to MF9. It will update it all.
Then use CF-Autoroot to gain root. After that same - install goomanager from Playstore and use it to install TWRP.
Click to expand...
Click to collapse
Awesome. Hey thanks again leader for helping me out. I'm usually never careless with these things. I use SACS rom but decided to try Miui. From some reason every time I flash Miui, I get the "Roaming Indicator Off" thing along with two signals. Reading the thread it suggest to format the internal. Why oh Why did I try that step. The rest is history....
Thanks again. Learned a lot with this process.
Glad you got it working.
There is a 'thanks' button too.
leaderbuilder said:
Glad you got it working.
There is a 'thanks' button too.
Click to expand...
Click to collapse
No doubt. I got to remember that!
Sent from my SPH-L720 using Tapatalk 4
Glad to hear you got it going.
Sent from my SPH-L720 using Tapatalk 4
leaderbuilder said:
Try downloading this file extract the tar and flash that in PC Odin. (don't check repartion!).
That is the full stock MF9 firmware, boot, recovery, kernel and ROM.
Then maybe use CF Autoroot, then goomanger to get twrp and flash one of your nand's
Click to expand...
Click to collapse
Thank you!
Ok so I started out on 4.2.2 & never took the 4.3 update in light of all the backtalk about the knox BS... I do my research first lol
But to install a 4.3 ROM I needed to odin the firmware/baseband to mk2... Soft bricked it... Every time I odined that mk2 firmware it would soft brick...
Odined back to 4.2.2 did everything all over again(root & philz touch CWM) & still soft bricked it when I tried to odin the mk2 firmware...
Realized that odin'ing to the mk2 firmware forever ruined any chances of going back to No Knox Stock pre-mk2.
I did however get past the "firmware update FC everything" with a simple factory reset from the devices settings menu!!! Needless to say it wasn't easy between all the FC's lol, but...... Yay no more FC!!!
So, now I'm stuck at stock rooted OTA mk2 with Philz Touch CWM(the only way I could safely get the proper firmware & cant seem to flash a single thing whatsoever...)
I'm a seasoned vet here, ex ACS themer, well over 5000 flashes on my belt & I NEEDS MY FIX!!! Someone please tell me theres a way to flash a ROM after all the BS I've been thru here...
If you were trying to flash the MK2 firmware (modem) by Unknownforce one of the things metioned was
NOTE: With MJA/MK2 Firmware, some people report better success with turning Auto Reboot and F. Reset Time unchecked. Do the same flash, but when you see PASS on Odin, unplug the phone and Hold the Power key for 10 seconds to reboot.
Click to expand...
Click to collapse
Also installing that firmware does NOT put knox bootloader on your system.
Taking the OTA however does!
IF you do have the latest Philz (philz_touch_6.08.9-jfltespr) you should be able to flash most ROMs.
In the last week there have been three or four ROMs that have been updated/released and they all run well. Big thing with flashing is that some builds require different recoveries and/or flashing instructions (as per the dev's OP). Some require rebooting of recovery etc.
leaderbuilder said:
If you were trying to flash the MK2 firmware (modem) by Unknownforce one of the things metioned was
Also installing that firmware does NOT put knox bootloader on your system.
Taking the OTA however does!
IF you do have the latest Philz (philz_touch_6.08.9-jfltespr) you should be able to flash most ROMs.
In the last week there have been three or four ROMs that have been updated/released and they all run well. Big thing with flashing is that some builds require different recoveries and/or flashing instructions (as per the dev's OP). Some require rebooting of recovery etc.
Click to expand...
Click to collapse
Tried this also no luck... although im running Philz v6.0.4.5
& once you install firmware that has knox you cant go back to no-knox versions...
try flashing the latest twrp from Philz, reboot recovery then in TWRP goto advanced and 'fix permissions. Then reboot.
Then back to recovery, flash Philz, reboot recovery and try install from again.
Either way... I still cant get anything to flash lol
I just need to flash something lol
I'm stuck at stock rooted OTA mk2 with Philz Touch CWM
what to do from there?
leaderbuilder said:
try flashing the latest twrp from Philz, reboot recovery then in TWRP goto advanced and 'fix permissions. Then reboot.
Then back to recovery, flash Philz, reboot recovery and try install from again.
Click to expand...
Click to collapse
never tried that lol
i only odined Philz
greenmuggy said:
never tried that lol
i only odined Philz
Click to expand...
Click to collapse
I keep zips of both recoveries on my externalSD card for just that.
leaderbuilder said:
I keep zips of both recoveries on my externalSD card for just that.
Click to expand...
Click to collapse
i didnt bc it didnt work at the time...
greenmuggy said:
i didnt bc it didnt work at the time...
Click to expand...
Click to collapse
leaderbuilder said:
I keep zips of both recoveries on my externalSD card for just that.
Click to expand...
Click to collapse
Both downloaded just gonna back up my backups on my sd & ill give it a try
BRB
7gb... ugh... this might take awhile
Ok as soon as i boot into TWRP & try to flash the newest Philz CWM it wont take...
Yeah... I'm stuck at v6.0.4.6 PhilZ Touch
Is there an odin for this 6.0.8???
I give up for now, its bed time too many beers lol...
Philz PC Odinable .tar
TWRP Odinable .tar
leaderbuilder said:
Philz PC Odinable .tar
TWRP Odinable .tar
Click to expand...
Click to collapse
Thanks, I will try when I get home from work.
Sent from my SPH-L720 using xda app-developers app
leaderbuilder said:
Philz PC Odinable .tar
TWRP Odinable .tar
Click to expand...
Click to collapse
If I can finish my homework 2nite ill give this a try... been busy as hell with my work & 3rd semester college they are kicking my ass this semester lol
leaderbuilder said:
Philz PC Odinable .tar
TWRP Odinable .tar
Click to expand...
Click to collapse
Yeah it still won't flash or odin to the newest Philz... What am i missing i need some major help
If i odin TWRP & then flash the newest Philz, it just goes back to the v6.0.4.6 Philz... Why>>> Ahhh!!!
Try just to PC Odin Philz. Use Odin 3.09 see if that works.
leaderbuilder said:
Try just to PC Odin Philz. Use Odin 3.09 see if that works.
Click to expand...
Click to collapse
Didn't work it wont go away, unless i odin TWRP, but that wont flash any roms either, & from twrp if i odin or flash philz it just goes back to the old version of philz
I think the partition that holds the recovery.img might have gotten corrupted or something that is causing your problems. I would try using odin 3.09 to flash the MK2 full stock tar to bring your phone back to an unaltered state. Then re root using safe root or cf autoroot. Then try to install the recovery you want. Might be less of a headache then fighting this problem you keep having getting a recovery to work.
I gave my wife my GS4 which I had on CM11 and she did not like it as it is constantly dropping her data connection and stopping her texts from sending receiving. I downgraded to CM10.2 and still the same issue. She absolutely hates it, so I am now looking to revert the phone back to 100% original form with stock firmware and ROM.
Is there a guide on XDA for how to do this on an AT&T GS4? I know that I will have to do this through ODIN, but want to make sure that I do everything precisely so that the phone doesn't get bricked.
Can I download the stock MDL ROM from here: sammobile. com/firmwares/3/?download=14623 and just install with supplied instructions via ODIN and be back to stock? Will those go ahead and overwrite CWM bootloader and all of that at the same time?
The phone still has the MDL baseband on it if that helps.
Thanks in advance.
Yes you can d/l the stock mdl rom from sammy and yes it will erase Cwm recovery and replave with stock....after you flash the stock mdl rom be sure to root and freeze the update apps....
dmc2359 said:
Yes you can d/l the stock mdl rom from sammy and yes it will erase Cwm recovery and replave with stock....after you flash the stock mdl rom be sure to root and freeze the update apps....
Click to expand...
Click to collapse
Thanks for the confirmation. Just reverted back and she is already much happier with the stock ROM. Thanks again.
Hey all, I need some help trying to troubleshoot what went wrong. Note between every flash I did clear cache and full formats of the whole phone.
I was on SACS 4.3 ROM, MK2 and already had CWM recovery
I ODINed the NAE modem, it stuck - my baseband and software say L720VPUFNAE
I flashed SACS 4.4.2 ROM, it went well booted up and setup, but could not provision the network (I had wifi)
I reflashed SACS 4.4 a couple times, same problems. Tried AOKP 4.4, glitchy and froze a lot.
Flashed stock NAE from sprint, installed, but stuck on provisioning again. I checked and it didn't show I had NAE, it showed my baseband and software was UNKNOWN.
Flashed back to SACS 4.3 and everything works well again. Still shows NAE as the baseband and whatnot.
I would have thought I had a bad modem flash, but everything works and shows NAE. What is the issue?
Have you tried a complete ODIN of NAE firmware?
hAvAAck said:
Hey all, I need some help trying to troubleshoot what went wrong. Note between every flash I did clear cache and full formats of the whole phone.
I was on SACS 4.3 ROM, MK2 and already had CWM recovery
I ODINed the NAE modem, it stuck - my baseband and software say L720VPUFNAE
I flashed SACS 4.4.2 ROM, it went well booted up and setup, but could not provision the network (I had wifi)
I reflashed SACS 4.4 a couple times, same problems. Tried AOKP 4.4, glitchy and froze a lot.
Flashed stock NAE from sprint, installed, but stuck on provisioning again. I checked and it didn't show I had NAE, it showed my baseband and software was UNKNOWN.
Flashed back to SACS 4.3 and everything works well again. Still shows NAE as the baseband and whatnot.
I would have thought I had a bad modem flash, but everything works and shows NAE. What is the issue?
Click to expand...
Click to collapse
go to the Phone dial pad and punch in ##786# to pull up the RTN screen, It'll show you more accurate info on than what your Baseband and Software ect. The first time I flashed Sacs 4.4 V1 I flashed it using Phils 6.0.4.7, had the same problem. got it to flash flawlessly using the same process, but using Philz 6.0.4.6. just to be sure that was the issue i repeated process using 6.0.4.7, same problem, wouldnt provision network, just wifi, everything said unknown. couldnt make it work using 6.0.4.7. Tried again using 6.0.4.6, and again everything worked perfect ALSO try flashing the stock NAE.tar.md5 first, then Sacs 4.4 v2. Ive read that worked for many, Your problem is most likey CWM. flash Philz 6.0.4.6 then re try, let me know how it goes
VandyCWG said:
Have you tried a complete ODIN of NAE firmware?
Click to expand...
Click to collapse
Agree with @bioshocked I've ended up with unknown baseband before as well. Flashed nae firmware before the installation worked out perfect.
Sent from my SPH-L720 using xda app-developers app
hAvAAck said:
Hey all, I need some help trying to troubleshoot what went wrong. Note between every flash I did clear cache and full formats of the whole phone.
I was on SACS 4.3 ROM, MK2 and already had CWM recovery
I ODINed the NAE modem, it stuck - my baseband and software say L720VPUFNAE
I flashed SACS 4.4.2 ROM, it went well booted up and setup, but could not provision the network (I had wifi)
I reflashed SACS 4.4 a couple times, same problems. Tried AOKP 4.4, glitchy and froze a lot.
Flashed stock NAE from sprint, installed, but stuck on provisioning again. I checked and it didn't show I had NAE, it showed my baseband and software was UNKNOWN.
Flashed back to SACS 4.3 and everything works well again. Still shows NAE as the baseband and whatnot.
I would have thought I had a bad modem flash, but everything works and shows NAE. What is the issue?
Click to expand...
Click to collapse
it's the exact same story for me .had to go back to 4.3 but my only issue is now i am unable to watch video in any form (personal vids ,Netflix,youtube,vine even cutscenes in games) i really dont know what to do .even tried to Odin back to MF9 but no success.I neeed HELP
@hakeem0996
.even tried to Odin back to MF9 but no success.I neeed HELP
Click to expand...
Click to collapse
If you were on MJA/MK2 bootloader you CANNOT Odin to anything before that - MF9 etc.
You'll need to PC Odin MK2 full tar to get back to stock. That tar is here.
For the others if you have a MK2 or NAE bootloader why not flash the full .tar of either one (MK2 or NAE) - both are available here. Full .tar will restore baseband and ALL partitions.
The for both the above root via CF-Autoroot, install recovery via PC Odin or goomanager - I'd go with Philz via PC Odin.
Then install what ever you want following the developer's instructions.
bioshocked said:
go to the Phone dial pad and punch in ##786# to pull up the RTN screen, It'll show you more accurate info on than what your Baseband and Software ect.
Your problem is most likey CWM. flash Philz 6.0.4.6 then re try, let me know how it goes
Click to expand...
Click to collapse
pontif said:
Agree with @bioshocked I've ended up with unknown baseband before as well. Flashed nae firmware before the installation worked out perfect.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Thanks, I'll try a full NAE firmware ODIN tonight, but I'm not sure where to get it. Is it this?
hAvAAck said:
Thanks, I'll try a full NAE firmware ODIN tonight, but I'm not sure where to get it. Is it this?
Click to expand...
Click to collapse
No, download the full tar file from Random45's thread in the android development thread. His has great download speed.
Sent from my icrap 2 using Tapatalk HD
cruise350 said:
No, download the full tar file from Random45's thread in the android development thread. His has great download speed.
Sent from my icrap 2 using Tapatalk HD
Click to expand...
Click to collapse
Thanks. Link
hAvAAck said:
Thanks. Link
Click to expand...
Click to collapse
Yup that it.
Sent from my SPH-L720 using Tapatalk
Go back and follow the instructions exactly: Here they are so thanks them and i'll take one too:
thanks goes to travisw0204 and GhostTac for this
This is a step by step instruction guide for those having issues flashing this ROM using a MF9 Bootloader and wanting to keep their bootloader Knox free. This should only be attempted if you have tried the first install option multiple times and are following the instructions completely (unless you are already rooted) and are getting hung up at the Sprint Splash screen. Read these instructions carefully and all the way through BEFORE you do this processes and make sure you are not cutting corners.
1. You need to be on MF9 bootloader
2. You need to flash a stock MDC .tar file. Once downloaded you have to extract the .tar file using 7zipper or a program similar. I got mine from RWilco's site found here..
http://www.rwilco12.com/downloads.ph...9/Stock ROMs
3. Once you have the stock .tar file you can then boot to download mode to prepare for Odin. Power down completely. Then press and hold Power + Vol down. You will see a warning page and then press vol up to get to download mode.*
4. Now plug your phone into your computer and open *Odin. I use 1.85 but some may use a later version. They all work.
5. Once connected to Odin the box in the middle to upper left should be yellow to let you know your phone is connected.*
6. Now click on PDA and find the .tar file for the stock rom that was obtained from rwilco's site. Hit start and let it run its course.*
7. Once Odin says Pass, the phone will reboot and you WILL get a yellow Sprint screen and nothing else. Don’t freak out. Press and hold the Power button and reboot the phone. Then press and hold power + vol up to boot into the stock recovery. From there do a factory reset and then the phone will boot up.*
8. Once fully booted you will have a small OTA update followed by the MF9 OTA update. This is the last OTA you should take.*
9. Once you go through those 2 updates you can then root using cf auto root through Odin (do the steps to get to download mode from above). Let it do its thing and the phone will reboot.*
10. Once you're booted up check to make sure you're rooted by looking for the super SU app in the app drawer.*
11. Now it's time for your custom recovery. Go back into download mode as mentioned above, plug the phone into the computer and open Odin once again to flash the CWM 6.0.4.4 recovery.*
12. Let the phone boot back up after the recovery flash.*
13. Now power down fully again and boot back into download mode.
14. Flash the mk2 modem found here (http://forum.xda-developers.com/show....php?t=2338919) through Odin and boot back up.*
15. Go to Settings and About Device and make sure the baseband and version both match and end with mk2.
16. Now power down again and boot back into download mode. At this point it's time to flash the NAE modem to get you ready for Kit Kat. That modem also can be found at the above link for Unknown or in the OP in this thread.
17. Once you flash the modem through Odin follow Sacs instructions on how to flash the 4.4.2 rom.
It sounds like a lot but really isn't and it will assure you that you're starting with a clean slate and a Knox free bootloader.*
*You can use PDA for all your .tar files for this process in Odin or AP for later Odin programs.*
**This process will also work for those on MJA and MK2 bootloaders with Knox. You can follow the same steps but instead of going back to MDC you have to go to MJA and work up from there. There will only be one OTA update taken and that's from MJA to MK2. Once on MK2 follow Sacs instructions on how to flash the rom and you'll be good to go.
Thanks go out to Unknown and rwilco for their hard work and dedication
hAvAAck said:
Hey all, I need some help trying to troubleshoot what went wrong. Note between every flash I did clear cache and full formats of the whole phone.
I was on SACS 4.3 ROM, MK2 and already had CWM recovery
I ODINed the NAE modem, it stuck - my baseband and software say L720VPUFNAE
I flashed SACS 4.4.2 ROM, it went well booted up and setup, but could not provision the network (I had wifi)
I reflashed SACS 4.4 a couple times, same problems. Tried AOKP 4.4, glitchy and froze a lot.
Flashed stock NAE from sprint, installed, but stuck on provisioning again. I checked and it didn't show I had NAE, it showed my baseband and software was UNKNOWN.
Flashed back to SACS 4.3 and everything works well again. Still shows NAE as the baseband and whatnot.
I would have thought I had a bad modem flash, but everything works and shows NAE. What is the issue?
Click to expand...
Click to collapse
---------- Post added at 01:59 PM ---------- Previous post was at 01:55 PM ----------
I bet you a buck you are not on the right bootloader. Check this using Device info which you can get from the app store. Then foolow the previous instructions i attached.
hAvAAck said:
Hey all, I need some help trying to troubleshoot what went wrong. Note between every flash I did clear cache and full formats of the whole phone.
I was on SACS 4.3 ROM, MK2 and already had CWM recovery
I ODINed the NAE modem, it stuck - my baseband and software say L720VPUFNAE
I flashed SACS 4.4.2 ROM, it went well booted up and setup, but could not provision the network (I had wifi)
I reflashed SACS 4.4 a couple times, same problems. Tried AOKP 4.4, glitchy and froze a lot.
Flashed stock NAE from sprint, installed, but stuck on provisioning again. I checked and it didn't show I had NAE, it showed my baseband and software was UNKNOWN.
Flashed back to SACS 4.3 and everything works well again. Still shows NAE as the baseband and whatnot.
I would have thought I had a bad modem flash, but everything works and shows NAE. What is the issue?
Click to expand...
Click to collapse
KC6UFO said:
]I bet you a buck you are not on the right bootloader. Check this using Device info which you can get from the app store. Then foolow the previous instructions i attached.
Click to expand...
Click to collapse
I was on MK not MF.
bioshocked said:
go to the Phone dial pad and punch in ##786# to pull up the RTN screen, It'll show you more accurate info on than what your Baseband and Software ect. The first time I flashed Sacs 4.4 V1 I flashed it using Phils 6.0.4.7, had the same problem. got it to flash flawlessly using the same process, but using Philz 6.0.4.6. just to be sure that was the issue i repeated process using 6.0.4.7, same problem, wouldnt provision network, just wifi, everything said unknown. couldnt make it work using 6.0.4.7. Tried again using 6.0.4.6, and again everything worked perfect ALSO try flashing the stock NAE.tar.md5 first, then Sacs 4.4 v2. Ive read that worked for many, Your problem is most likey CWM. flash Philz 6.0.4.6 then re try, let me know how it goes
Click to expand...
Click to collapse
I flashed stock NAE and then SACS, same problem. Where can I find Philz 6.0.4.6? All I see are 6.07 and 6.19
Now I'm back stock NAE not rooted and I can't seem to charge the phone. Everytime the screen goes to sleep it wakes back up to reconnect the charger..
leaderbuilder said:
@hakeem0996
If you were on MJA/MK2 bootloader you CANNOT Odin to anything before that - MF9 etc.
You'll need to PC Odin MK2 full tar to get back to stock. That tar is here.
For the others if you have a MK2 or NAE bootloader why not flash the full .tar of either one (MK2 or NAE) - both are available here. Full .tar will restore baseband and ALL partitions.
The for both the above root via CF-Autoroot, install recovery via PC Odin or goomanager - I'd go with Philz via PC Odin.
Then install what ever you want following the developer's instructions.
Click to expand...
Click to collapse
Thanks for your advice I flashed MK2 and flashed 4.3 scas rom and i'm no longer on NAE thank i can play videos again on my phone now my new problems is that my data is really weak now my phone can't even go to the play store without loading for what seamed an eternity . Is there a way i can fix that ? is there a code i can punch in tha reset my signal to make my data stronger .Sorry for nugging you guys .
hakeem0996 said:
Thanks for your advice I flashed MK2 and flashed 4.3 scas rom and i'm no longer on NAE thank i can play videos again on my phone now my new problems is that my data is really weak now my phone can't even go to the play store without loading for what seamed an eternity . Is there a way i can fix that ? is there a code i can punch in tha reset my signal to make my data stronger .Sorry for nugging you guys .
Click to expand...
Click to collapse
update the PRL and Profile in System Updates
leaderbuilder said:
update the PRL and Profile in System Updates
Click to expand...
Click to collapse
i did that already
hakeem0996 said:
i did that already
Click to expand...
Click to collapse
What modem/baseband are you on?
Hi Guys I'm trying to install a custom Rom on my phone but have failed 4 times now and have to reach out to the forum for help. I'm on 4.4.2 ota and have rooted w/ towel root sucessfully, installed safestrap 3.72 and 3.75, busybox and super su. I advance wipe and do a clean install. Everytime it says it was successful but when I reboot the screen goes black and does noting. The phone remains on but nobodys home. I've tried the Jasmine rom and the alliance rom with the same results. I used odin to go back to stock but I want a custom rom. Can anybody help? I've attached a screenshot of my about phone. Also can anybody recommend a Rom that helps with the signal/gps issues that started after KK?
Thanks in Advance!
cjacobs611 said:
Hi Guys I'm trying to install a custom Rom on my phone but have failed 4 times now and have to reach out to the forum for help. I'm on 4.4.2 ota and have rooted w/ towel root sucessfully, installed safestrap 3.72 and 3.75, busybox and super su. I advance wipe and do a clean install. Everytime it says it was successful but when I reboot the screen goes black and does noting. The phone remains on but nobodys home. I've tried the Jasmine rom and the alliance rom with the same results. I used odin to go back to stock but I want a custom rom. Can anybody help? I've attached a screenshot of my about phone. Also can anybody recommend a Rom that helps with the signal/gps issues that started after KK?
Thanks in Advance!
Click to expand...
Click to collapse
You need to flash the NC2 kernel via odin. File and instructions can be found here. When following the steps in the OP you can substitute the rom you want for the one you can download from the post.
Also incase you didn't see it in the Safestrap OP you will only be able to use the stock rom slot, if trying to flash on a created slot it won't boot properly or at all (rom slots are only supported on NC2 firmware and previous, the ota is NC4).
Hope this helps.
That's great thank you very much for your help!
Do I just flash the kernal over my stock rom?
cjacobs611 said:
Do I just flash the kernal over my stock rom?
Click to expand...
Click to collapse
To be safe you might want to flash the rooted stock rom provided in the post I linked earlier. That rom is the NC4 stock with pre-root and a couple other tweaks Basically the same as OTA but better. Just follow the steps in the OP and you'll be good to go (if you haven't already).
thank you
My pleasure.
Ok I'm sorry I'm still confused. The OP doesn't say to flash with Odin anywhere it says flash with Safe strap. Do I flash the firmware with Odin first then Rom?
cjacobs611 said:
Ok I'm sorry I'm still confused. The OP doesn't say to flash with Odin anywhere it says flash with Safe strap. Do I flash the firmware with Odin first then Rom?
Click to expand...
Click to collapse
Anything firmware, kernel or modem related must be flashed in Odin as long as we have a locked bootloader. Just follow the steps as instructed and you'll be fine.
Sent by Darkseid from Apokolips