Database Users

Change LCD screen + Digitizer

Hello there,
I want to change the lcd screen of my niki, wich has been damaged following a shock.
I found a store which gives me the option to sell me only the screen and the digitizer, or make the replacement by themselves for an extra cost of 20€.
My question is : is it easy to replace the whole block (lcd + digitizer) and does someone here knows about an instruction guide ?
Thank's in advance and excuse me for my poor english...

Broken LCD

Hello all,
My Touch HD slipped from my hands and ended-up flat on the screen... the screen does not have a scratch, the digitizer still works perfect, but the LCD underneath is broken, so I get a black screen. I can still access the Touch HD via my PC thanks to MyMobilier, though (so why do I complain, huh?!!)!
I ordered a replacement LCD in Hong-Kong (thanks ebay!), got the HTC Service Guide, managed to remove the antenna cover (tough!) and dismantle the whole thing. But NOW I AM STUCK with the 'bezel', i.e. the cover, screen, digitizer, LCD, and metal plate with bolts all apparently glued together.
Anyone faced the same problem? Anyone knows how to separate the LCD from the screen and digitizer?
Cheers,
FroggyZ

Up
Anyone can help with this???

Replacing LCD screen

My touch hd has a faulty LCD screen, and I've bought a new LCD screen spare part, just so I could replace it myself. I'm trying to change the LCD to the new one, but am having problem removing the old LCD from its front housing. Could anyone help me with this? I've removed all the screws, and tried to pick on the side to remove the LCD, but have failed to remove it.
Thanks in advance!

[Q] I think I broke my Digitizer

Hi
Yesterday I Replaced my Speaker, when I opend my HD2 I accedently lifted up the Glas from the LCD. I think the Glas is the Digitizer too. So now when I use the Touchscreen it clicks Randomly or slides randomly. What could cause the Problem and can I repair it?
thx for your help

if im not mistaken the digitizer is attached to the lcd glass facing down. might need to replace

you can replace the digitizer without the lcd panel, but it isn't easy to replace it because you need to seperate the digitizer from the lcd and the lcd can breake. it is easier to replace the digitizer with the lcd panel in one peace.
unfortunately it is more expensive than only the digitizer.
if you replace the digitizer you have to stick it to the lcd panel and it must be in the right position(as before)

After a few tests I found out that not the Digitizer is broken. Its a little tape like thing on the side of the screen(digitizer). Is this possible?
Sent from my HTC HD2 using XDA App

Touch don't work after Screen replacing

Hey there!
I have problem with my old N7 :<
After replacing LCD screen with digitizer (previous was cracked) touch does't work.
I try to move the tape from digitizer but no effect.
I have additional digitizer and second nexus 7, but i don't know that if i only connect the digitizer it will work, or i need to do something eles.