Related
Hi Everyone,
I know its a few threads about how to unbrick Advent Vega and how many threads is that many ideas how to do it.
I was running ViewCOMB 3.2 built 5.1 and everything was ok, but ive installed Rom Manager from Market, and tried other rom (wrong one ).
After reboot nothing is happening, i mean when i press power button for ok 10 sec and then short press again, screen is on black with backlight for about 1 sec and keep coming off.
Ive tried to turn into boot mode (2sec. back + 2 sec. power) about 1000 times already with power cable on and off, but nothing happening.
I have drivers installed on my laptop (had installed custom rom already).
I want to specify a few facts:
Is battery must be charged to full? or should start another try from flat?
If so, how to drain battery if tablet wont power up?
Is better to try with power cable on or off?
Some people saying about holding buttons for a 2 sec, other for 1 sec, what is right?
Any ideas?
Many thanks!
Finally after hours of pressing and holding power + back buttons I've sorted it.
- hold power button for about 10 sec. (to make sure device is off)
- hold back button 2 sec. (don't release)
- press power button till notification sound will come on.
Then had notification sound from Windows about new device connected. On my device list was Nvidia usb boot-recovery device.
Before last try I've charged battery to full (blue light) then disconnected power cable. I couldn't do it with battery full and power cable in (strange).
I think the main hint is to make sure that device is off. Ive noticed that even if screen is off device might be running.
Hopefully this little explanation will help
okti said:
Finally after hours of pressing and holding power + back buttons I've sorted it.
- hold power button for about 10 sec. (to make sure device is off)
- hold back button 2 sec. (don't release)
- press power button till notification sound will come on.
Then had notification sound from Windows about new device connected. On my device list was Nvidia usb boot-recovery device.
Before last try I've charged battery to full (blue light) then disconnected power cable. I couldn't do it with battery full and power cable in (strange).
I think the main hint is to make sure that device is off. Ive noticed that even if screen is off device might be running.
Hopefully this little explanation will help
Click to expand...
Click to collapse
THAAAAAAAAAAAANNNNNKKKKK YYYYYYYYYOOOOOOOOOOUUUUUUU!!!!!!!!!!!!!!!!!!! I had the same problem and I thought it was bricked for like, 4ever, so THNX!!!
i had exactly the same problem last night when i asked CWM to do a backup and the screen went black and wouldnt switch on.
one way to tell if it hasnt powered off properly when its stale booting is to look under the black surround between the screen and the camera and you may see a faint blue light. Only viewable with about 5 deg viewing angle (so same as the screen LOL)
i found i could not get it into boot mode at all. No matter how many times i did it. Ending up taking the back off and pulling the battery and then trying again - guess what? Worked straight away first time!!!
I can only presume that when its in this stale boot state it isnt shutting down properly, even if the light is off etc. Although i did come across a post after sorting it that said sometimes it can take a 60 second press of the power button to properly shut it down when its in stale boot.
So now i'm back to standard modded stock rom 2.2 and its horrendous!!!!
Just finished downloading the beta ics rom exe - so gonna whack that on and have a play! Hope its as good as they say it is. If it isnt, then i'll put honeycomb back on.
I think that instead of pulling tha battery out you could also press and hold the power button for 9 seconds, right?
Editing this as I'm desperate for help and things have moved on since I first posted, below is where I am up to post 11 of this thread.
I flashed Vegacomb b (exe), it restarted but stayed on the warning about paying for vegacomb for 10-15 minutes which didn't seem right so I held power for 6 seconds and it turned off. After that it would never turn on or go into recovery (I know all the methods, none worked).
Today I unhooked the battery, when I plug the battery back in the screen comes on for a second but then it's as it was, unresponsive. HOWEVER, if I plug the mains in with the battery disconnected then it immediately tries booting but still sticks at the warning (left for over 20 minutes). If I plug the battery in while on this screen then remove the mains it stays on. The power button is unresponsive through this so I still cannot get into recovery.
Any more ideas that haven't been mentioned?
I've tried well over 100 times to get into recovery but it's not happening
anyone willing to have a go at fixing (cheaply!) if I send them it?
Original Post:
Hi guys, just managed to (re?) install Vegacomb (b, from exe), it restarted but stayed on the white screen with the warning text about paying for Vegacomb for over 10 minutes so I held down the power button to turn it off, now I cannot do anything to boot it up (tried holding power button down from 0.5 seconds to 60 seconds!), it also won't boot into recovery. Is there anything at all that can be done to get this going?
cheers
OK, I've tried holding down back while plugging in (fully charged btw), tried all variations of button presses with back and power, with and without USB, with and without power cable.
Only got until 10PM (UK time) to get this sorted (it's now 6PM) so any help/advise would be appreciated
Flash back to modded stock then try again.
From modded stock go app drawer and run recovery
From recovery wipe data, cache then go advance then wipe dalvik
Then press back
Then install zip from SD
Choose vegacomb from whatever directory on your SD you copied it to then confirm
If you ain't Got Vegacombe zip then download it.
Or you could run the .exe again but the above is my preferred method.
Also you might need to download modded stock v2 if you ain't already got it.
Good luck.
intel007 said:
Flash back to modded stock then try again.
From modded stock go app drawer and run recovery
From recovery wipe data, cache then go advance then wipe dalvik
Then press back
Then install zip from SD
Choose vegacomb then confirm
If you ain't Got Vegacombe zip then download it.
Or you could run the .exe again but the above is my preferred method.
Good luck.
Click to expand...
Click to collapse
??
the Vega won't turn on and won't go into recovery, cannot flash anything, nothing comes up on PC, tried all variations of the back and power buttons (inc back, plug in power & usb, press power, leave 2 seconds and release back) over 100 times. it's like it's dead.
the only thing it does is show a blue LED when I plug the power cable in
I've read that if you got less than 50 or 60% battery it wont go into flash mode (back button 2 seconds - power & back 2 seconds)
Have you got enough battery cause mine takes half a day to charge.
intel007 said:
I've read that if you got less than 50 or 60% battery it wont go into flash mode (back button 2 seconds - power & back 2 seconds)
Have you got enough battery cause mine takes half a day to charge.
Click to expand...
Click to collapse
100% (solid blue LED), been on charge for over 24 hours
I'm baffled mate, I've had same issue couple of times but after 10mins or so I've always got it to power back on.
Bricked
I've had the same problem and although quite drastic, remove the rear cover and unplug the battery connection (the multipin one with red and brown/black wires).
With the mains plug out,i found that if you press volume up and power with the wires unplugged and leav eit for a few mins then use back + power it will start as you need it to.
It may take a few tries but i have managed to do it following this procedure about 7-8 times.
Hope this helps.
DAve
I had trouble getting into recovery when the Vega was 100% charged (i.e. charge led was solid blue). When I let it discharge a little so it was flashing with the charger plugged in, I managed to get into recovery then.
dmarchant said:
I had trouble getting into recovery when the Vega was 100% charged (i.e. charge led was solid blue). When I let it discharge a little so it was flashing with the charger plugged in, I managed to get into recovery then.
Click to expand...
Click to collapse
I can't discharge it though as it doesn't turn on, left it 14 hours from last night, back at work again now and it still says fully charged
got the battery disconnected now to give it a try
Disconnected battery for around 10 minutes, put it all back together, still can't boot or get to recovery
EDIT: it works when the battery is disconnected (goes to the Vegacomb warning screen but no further, cannot power off or get to recovery still)
any ideas?
Anyone got any ideas?
it's meant to be unbrickable from what I've read so there must be a way around it but I'm out of ideas!
its user error. remeber to put it into recovery mode you need the power cable plugged into it too as well as usb.
slybunda said:
its user error. remeber to put it into recovery mode you need the power cable plugged into it too as well as usb.
Click to expand...
Click to collapse
Cheers, but its not user error. I'm not that stupid
Hi, this may not help but i had trouble flashing the stock rom because of the battery being fully charged, could only get the screen to light up so left it over night and then went through the normal routine and got into recovery.
Bill
Hi there
Just one question, how do you know for sure it hasn't gone into nvflash mode?
I know what you are going through trying to get the ruddy thing into nvflash, it's a mare if you don't quite get that timing right but seeing as the screen doesn't light up when it's in nvflash what is telling you whether you are actually in it, other than the screen coming on to say you are not or relying on a windows message?
As I said I had the same problems many a time but I use Audi tool now to tell me if nvflash has started, I got it off the Modaco forum, but when you are in nvflash it actually tells you so rather than relying on perhaps windows to tell you it has happened
If you haven't come across the audi tool before then just do a search for it on Modaco, I don't know if they have got it here on XDA.
mmace said:
Anyone got any ideas?
it's meant to be unbrickable from what I've read so there must be a way around it but I'm out of ideas!
Click to expand...
Click to collapse
wow, i'm quite surprised by the number of people who are taking their batteries out when they think there is a problem. You should never need to do this unless it is actually faulty.
Ok yes the Vega is nearly indestructible I have had my in a complete mess many times and have never had to do anything that hard to recover. Some times it will be a pain to get into nvflash mode but this can always be done just have to be patient and know a couple of tricks.
If you have tried the back button and then the power a few times and nothing there is another method.
Instead unplug the power then hold the back button down, whilst holding down the back button plug in the power release the back button after a couple of seconds (I like to count to 5)
I am hoping that you already have the USB cable connected and the right drivers installed on your PC.
Billy..
If you need more help head over to TabletRoms and look in the Vega forum (sorry XDA guys just there is a lot of other useful information there)
wks said:
Hi, this may not help but i had trouble flashing the stock rom because of the battery being fully charged, could only get the screen to light up so left it over night and then went through the normal routine and got into recovery.
Bill
Click to expand...
Click to collapse
I've tired fully charged and letting the battery drain for 40+ mins after it's been on the "warning" screen
mitt69 said:
Hi there
Just one question, how do you know for sure it hasn't gone into nvflash mode?
I know what you are going through trying to get the ruddy thing into nvflash, it's a mare if you don't quite get that timing right but seeing as the screen doesn't light up when it's in nvflash what is telling you whether you are actually in it, other than the screen coming on to say you are not or relying on a windows message?
As I said I had the same problems many a time but I use Audi tool now to tell me if nvflash has started, I got it off the Modaco forum, but when you are in nvflash it actually tells you so rather than relying on perhaps windows to tell you it has happened
If you haven't come across the audi tool before then just do a search for it on Modaco, I don't know if they have got it here on XDA.
Click to expand...
Click to collapse
I have Audi, I also have Device manager open, I know 100% it's never gone into recovery mode sine I started with this problem.
BillyFish said:
wow, i'm quite surprised by the number of people who are taking their batteries out when they think there is a problem. You should never need to do this unless it is actually faulty.
Ok yes the Vega is nearly indestructible I have had my in a complete mess many times and have never had to do anything that hard to recover. Some times it will be a pain to get into nvflash mode but this can always be done just have to be patient and know a couple of tricks.
If you have tried the back button and then the power a few times and nothing there is another method.
Instead unplug the power then hold the back button down, whilst holding down the back button plug in the power release the back button after a couple of seconds (I like to count to 5)
I am hoping that you already have the USB cable connected and the right drivers installed on your PC.
Billy..
If you need more help head over to TabletRoms and look in the Vega forum (sorry XDA guys just there is a lot of other useful information there)
Click to expand...
Click to collapse
TabletRoms has been no help for me, there's been no reply at all for my problem but there has here and at MoDaCo. I pulled the battery as a last resort as NOTHING is working, I've tried all the tricks at least 2 dozen times, some a hundred +, including the one you mention
Well I don't want to teach you to suck eggs, but I take it you did use Audi to delete and replace your drivers.
And then when powering on the Vega you held the back button for 2 secs and then the back and power buttons for 6 secs to get the Vega detected?
For me I can only see that there can only be 3 other possible causes
1./ the back button is broken on the vega
2./ The USB port on your PC or on the Vega has gone up the swanee
3./ The USB lead is no good
The Vega may be unbrickable but if the back button or the USB port has had it then .....
Yeah, tried it, cheers.
Good evening...
I've had this problem for the past 5 days..i tried a new ROM but didn't like it so i went back to my original rom...but the phone after the recover stopped working..so i tried using the RSDlite to install another ICS to be able to start my device.,and after the installation was almost done,,RSD requested the phone to be restarted,,after that it completely died! nothing happens when i start the phone..no light..no screen light..just one thin..when i connect it to the charger or to my pc the white LED is on...but the screen stays black like its OFF..
I left the device on charger for TWO days..
I tried Vol UP + Power to get into the menu...
I took off the battery for ONE day,,,
NOTHING...just black screen with white charging led,,
when i connect it to my pc..there isn't even the notification sound that a new device is connected..
not even RSDlite is able to find the device...
Please help me...i've tried everything i know..some ppl might say recharge the batt,,as i said i left it on the charger for 2 days!
i don't know what to do next !
HELLO !!
wahoby said:
Good evening...
I've had this problem for the past 5 days..i tried a new ROM but didn't like it so i went back to my original rom...but the phone after the recover stopped working..so i tried using the RSDlite to install another ICS to be able to start my device.,and after the installation was almost done,,RSD requested the phone to be restarted,,after that it completely died! nothing happens when i start the phone..no light..no screen light..just one thin..when i connect it to the charger or to my pc the white LED is on...but the screen stays black like its OFF..
I left the device on charger for TWO days..
I tried Vol UP + Power to get into the menu...
I took off the battery for ONE day,,,
NOTHING...just black screen with white charging led,,
when i connect it to my pc..there isn't even the notification sound that a new device is connected..
not even RSDlite is able to find the device...
Please help me...i've tried everything i know..some ppl might say recharge the batt,,as i said i left it on the charger for 2 days!
i don't know what to do next !
Click to expand...
Click to collapse
While phone is off do the following:
1. Press volume down button and power off button both together till you see Android Robot with (!) Exclamation mark;
2. Now release both keys and press volume keys (both up and down volume keys together);
3. This will show you Stock Recovery;
4. Now from volume down key select "wipe Data" and execute it with power key;
5. Now select Reboot.
This will probably resolve the issue. However, if the issue still persists then you need to use RSD lite to flash your phone with the some Froyo SBF.
For more info: http://forum.xda-developers.com/showthread.php?t=1216982
[Note: To enter bootloader menu so that RSD lite recognize your phone you need to have its USB drivers installed on your system and while booting you need to press Volume Up key and Power key together while phone is off to enter Bootloader menu to flash with SBF.]
Hope this helps!!
ATB!!
wahoby said:
Good evening...
I've had this problem for the past 5 days..i tried a new ROM but didn't like it so i went back to my original rom...but the phone after the recover stopped working..so i tried using the RSDlite to install another ICS to be able to start my device.,and after the installation was almost done,,RSD requested the phone to be restarted,,after that it completely died! nothing happens when i start the phone..no light..no screen light..just one thin..when i connect it to the charger or to my pc the white LED is on...but the screen stays black like its OFF..
I left the device on charger for TWO days..
I tried Vol UP + Power to get into the menu...
I took off the battery for ONE day,,,
NOTHING...just black screen with white charging led,,
when i connect it to my pc..there isn't even the notification sound that a new device is connected..
not even RSDlite is able to find the device...
Please help me...i've tried everything i know..some ppl might say recharge the batt,,as i said i left it on the charger for 2 days!
i don't know what to do next !
Click to expand...
Click to collapse
Have you had enough battery when you were flashing the sbf/could it be possible, that the battery died during flashing process?
thanx 4 the reply,,but i have all the drivers installed on my pc,,and the phone won't start..i tried the Vol Down+ powe..nothing..Vol Up+ power nothing..Both Vol+ power also nothing..i left the phone on charger for two days..still nothing..when i try the RSD it doesn't find the device...even when i connect the phone to the pc..there isn't any sound to a new device is connected !! just the white led is on..but screen is always black nothing at all
i have used the RSD before and i know how to install roms using it..also i know how to go to boot menu or recovery menu..but right now i am unable to do anything
Try this:
http://forum.xda-developers.com/showthread.php?p=10264115
Why?
Cause a damaged OS, cannot charge your battery. you must pull your battery out of defy and charge the battery externally.
Or you buy a new battery, or let charge your old battery by a cellphone-seller, or asks a friend of yours with a defy to charge your battery for you etc.
Have u checked the voltage of your battery, it must be 4,1 V if the battery is fully charged.
I think esok44 is right your battery is empty, there is not enough power in it to start your defy.
i just tried the usb modification to connect it to the battery directly,,done all the steps as told ... nothing!!!
i'm really getting frustrated cuz its been like this for the past one week,,i've tried everything
don't have any friends with defy phone...
can't think of anything else to do but to brake the phone
well if everything fails, give it to motorola...
if it really is broken and everything fails, then try it.
would be the last option for me, but at least it is one...
But as is said, had the same problem and in may case it worked...
i've read on xda about an usb-manipulation to flash sbf when battery is empty, maybe you could try this...
I'll add a link to it
Link: http://forum.xda-developers.com/showthread.php?t=1489289
i have encountered this problem previously and the solution was replacing the battery, as RATTAR said the battery is not charged. try to charge your battery or try another charger, once it's charged rsd will recognize it. don't panic or despair.
Hi,
Last night my nexus died, i have no idea why. it was working fine until the battery drained and when i tried to charge the phone the LED charged to RED and nothing happen.
I have tried every thing that i can think of to reboot the phone but with no success.
(charging it all night, pressing any button combination.. etc.)
the only thing i can do with the phone is when i press the power + volume up for 30-60 sec the red led turn off.
I have taken apart the phone and disconnected the battery for few hours and tried again, but noting helps.
I believe that the problem is that the battery is fully drained and i need to charge it without using the phone.
how can i do it ?
do you have any other recommendations ?
Thanks
http://forum.xda-developers.com/search.php?searchid=158131778
Hi,
Try this:
Faux123 said:
I got into many red LED situations, I was able to come out of it everytime by using the procedure I posted above (that post was from pure experience I had).
red led bootloop unbrick procedure
1. plug phone into USB cable connected to computer
2. wait for it to go into charge animation
3. unplug, then press power button to boot, immediately press vol up + vol down.
4. hopefully you booted into bootloader mode (rinse and repeat steps 1~4 if you can't get to this point)
5. chose recovery (if your recovery is corrupted, repeat steps 1~4 and do fastboot flash recovery cwmxxx.img)
6. from recovery choose restart system
if you can't get to step 2, because N4 has a bug with battery capacity, plug your phone into AC charge and let it charge for a few mins. then restart from step 1...
Click to expand...
Click to collapse
But even if disconnected / reconnected the battery still nothing... (howewer it's a good solution for the red light of death)
Try the thing above or let your phone in charge for some hours and don't use it...
If nothing works -> warranty
and if you get into download mode instead of red led use power and hold it for 10 secs till the screen goes off then quickly press and hold power up and down at the same time to boot into bootloader
Sent from my Nexus 4 using Tapatalk 2
12 hours in the charger and nothing.
disconnect the battery (wait 10 minutes) reconnect and try to charge/power button/button combination .. nothing!!!!
i will try contact Google and check how can i replace the phone.
did any one manage to replace a phone ? Google is blocking my IP (i'm not from the US) so i can't read the FAQ .
fakeer said:
12 hours in the charger and nothing.
disconnect the battery (wait 10 minutes) reconnect and try to charge/power button/button combination .. nothing!!!!
i will try contact Google and check how can i replace the phone.
did any one manage to replace a phone ? Google is blocking my IP (i'm not from the US) so i can't read the FAQ .
Click to expand...
Click to collapse
I read somewhere that disconnecting the battery and reconnecting it will clear this issue, of course it means that you have to open the phone which is not hard
DynamicRam said:
I read somewhere that disconnecting the battery and reconnecting it will clear this issue, of course it means that you have to open the phone which is not hard
Click to expand...
Click to collapse
it didn't work
Hi,
@ fakeer, when you said you have disconnect the battery, you mean you have open the phone? Or it's just plug / unplug from the charger? This is what I understood...
Like DynamicRam said you can open the phone and disconnect / reconnect the battery...
EDIT: ok...
fakeer said:
it didn't work
Click to expand...
Click to collapse
open the phone
It looks like your battery(battery sensor) is damaged
http://www.ebay.com/sch/i.html?_trk...timus+E960+Google+Nexus+4+&_sacat=0&_from=R40
Hello to all experts.
1- Accidently my wileyfox storm battery was fully drained at night and i was not at home during that time.
I connected mobile to wall outlet it was showing red colour on home button when connected (as a battery charging indication) but after near about 8 hours i tried to turn it on but no luck. I pressed power button for many seconds, many times but no luck.
Now what should I do to turn on my wileyfox storm.
2- My second question is how to open back cover of my wileyfox storm. i did not find any notch or point to open back cover to see inside.
Thanks in advance.
Plug your phone on charge but not in usb, and wait about 20mn
I am having this problem as well right now, how did you fix it?
I too have the same problem , it was off because drain , but then put in office is no longer lights . the light is always red . what can I do?
Leave it charging for a while from the mains. Red light means charging on low charge, the screen doesn't turn on until it has some charge.
it is normal to be in power for eight hours, and nothing has changed ? Red light always on and off screen
rugabella said:
it is normal to be in power for eight hours, and nothing has changed ? Red light always on and off screen
Click to expand...
Click to collapse
Have you tried holding down the power button now?
Johndawolf said:
Have you tried holding down the power button now?
Click to expand...
Click to collapse
yes , and unfortunately nothing happens . problems that can have ? He does not get the charge? because it comes on the same spy and it is always red ? the phone has just three months
for anyone who is interested I solved !!! simultaneously press power button and volume less for about 20 seconds and the phone switches
rugabella said:
for anyone who is interested I solved !!! simultaneously press power button and volume less for about 20 seconds and the phone switches
Click to expand...
Click to collapse
Im dealing with the same problem from morning. Im going to try your solution by 10 minutes.
ijaz1976 said:
Hello to all experts.
1- Accidently my wileyfox storm battery was fully drained at night and i was not at home during that time.
I connected mobile to wall outlet it was showing red colour on home button when connected (as a battery charging indication) but after near about 8 hours i tried to turn it on but no luck. I pressed power button for many seconds, many times but no luck.
Now what should I do to turn on my wileyfox storm.
2- My second question is how to open back cover of my wileyfox storm. i did not find any notch or point to open back cover to see inside.
Thanks in advance.
Click to expand...
Click to collapse
I am no expert, but I've had the same problem after fully running the phone battery down. While looking for an answer I managed resolve the issue by to hold the power down and down array while the phone in chagrining for around 2 minutes and the phone started up, almost by complete accident.
rugabella said:
for anyone who is interested I solved !!! simultaneously press power button and volume less for about 20 seconds and the phone switches
Click to expand...
Click to collapse
Hi rugabella
please guide me
I have same problem
since 17:30 today my storm battery drained and when i put it in charge LED light RED
it not Happened before , until now (20:44) phone is in charge and LED light is red
I tried time to time the key combination you mentioned (Power + volume Down) but nothing happens
now I'm waiting for more time to spent charging
Can you or someone else help me more?
tiosus said:
Hi rugabella
please guide me
I have same problem
since 17:30 today my storm battery drained and when i put it in charge LED light RED
it not Happened before , until now (20:44) phone is in charge and LED light is red
I tried time to time the key combination you mentioned (Power + volume Down) but nothing happens
now I'm waiting for more time to spent charging
Can you or someone else help me more?
Click to expand...
Click to collapse
16hours and still RED light and nothing else
any help!!!!!!!!!!!!!?
tiosus said:
16hours and still RED light and nothing else
any help!!!!!!!!!!!!!?
Click to expand...
Click to collapse
I had the same issue you are having, battery ran down to empty, charge light would always be red no matter how long it was plugged in, slow charge, fast charge, holding down the power button, even with the inclusion of the vol down, nothing worked.
I fixed it by opening up the phone and disconnecting then reconnecting the the battery. After doing so the phone started to properly charge (phone booted up and displayed the battery animation). Everything now operates as normal, though I won't be letting it drain to 0% again, that's for sure.
If you're able to, give it a shot and hopefully it will do the trick for you as well (though I'm probably way to late).
Hello to all
I again have the same problem, the battery of my storm has fully discharged, but although is it charging for many hours the LED light is always red and the phone will not turn on. This time even while holding together power button and volume less nothing is happening.
Can anyone help me and tell me how I can fix ?
Level1imp how did you open the phone to disconnect the battery ?
level1imp said:
I had the same issue you are having, battery ran down to empty, charge light would always be red no matter how long it was plugged in, slow charge, fast charge, holding down the power button, even with the inclusion of the vol down, nothing worked.
I fixed it by opening up the phone and disconnecting then reconnecting the the battery. After doing so the phone started to properly charge (phone booted up and displayed the battery animation). Everything now operates as normal, though I won't be letting it drain to 0% again, that's for sure.
If you're able to, give it a shot and hopefully it will do the trick for you as well (though I'm probably way to late).
Click to expand...
Click to collapse
How i did you open up the phone? I'm struggeling with it
Thank you soooo much!!!!
rugabella said:
for anyone who is interested I solved !!! simultaneously press power button and volume less for about 20 seconds and the phone switches
Click to expand...
Click to collapse
After I read your message here, I've tried and finally I solved this problem in my phone.
I was getting crazy because there isn't place to fix this phone in my country and the company Wileyfox wanted me to send my phone to someone in europe to them send to Wilefox to fix it. I've spoke with the company today to see what could they do for me and the solution they gave to me was this and to I try to open the back by myself. But this last solution it isn't a solution because would make me loose the garantee. Why the technician didn't told me about this solution? I'm so disappointed with them.
hi i have a wileyfox storm it is not going on when i press power button .now i connect with wall charger so it show a red circle on the bottom and phone show logo on and of .how can i put it on
This works!!
For anyone who needs it, this also works on wileyfox swift 2
Had this too, but solved
Just had this problem occur on my Wileyfox Swift 2 Plus. Completely drained, left on charge for 4h but it got 0% charged in that time.
For me, hooking it up to a slightly stronger power source (5V 2.1A) USB port of my power bank,
in combination with Power + Volume UP
Got me to a boot screen I'd never seen before.
Hit Fast Boot, it looked like it just turned off again but a few seconds later I saw the normal boot screen pop up