help my samsung y duos s-6102 can not charge the battery and can not read usb mode while the external memory can not be read (e: can not mounted) while the screen just to get out and then back restrart samsung logo, how to return to the system of Android again?
I have already answered you
http://forum.xda-developers.com/showthread.php?t=1882782&page=9
no need to post multiple times
flash stock rom via odin to restore phone back to being bootable
if your phone doesnt charge or power via usb cable take to repair shop
Related
my phone will not turn on after successfully performed a restore backup with Heimdall
the backup are the Original from Factory....
whats happen i try to charge my phone, and the screen doest show any sign of life
it doestn boot it doesnt charge, it cannot opened by me
heeeeeeeeeeeeelllppppp
If Heimdall didn't give you any errors then the flash went through fine. Are you sure that you flashed files that were meant for your particular model of Galaxy Tab?
Given the information you've given about the device not turning on or responding at all, it seems as though you've flashed a bootloader that was not designed for your device. You can try create a custom jig and it may be able to boot your device into download mode using the backup secondary bootloader. If that doesn't work then the only other fix is a JTAG fix which is best performed by Samsung themself.
i put in First Boot Loader
boot.bin
i Put on Secondary Boot Loader
Sbl.bin
any mistakes here? these files are recovered from my Tab with Roto BackUp
any chance to do it in da house and not from Samsung Warranty?
Benjamin Dobell said:
You can try create a custom jig and it may be able to boot your device into download mode using the backup secondary bootloader.
Click to expand...
Click to collapse
HOW to do IT ??? explain me more steps
i found this video for make cable for samsung captative......
http://www.youtube.com/watch?v=Rdn5GoRjhn0
what type of cable i need to do the same on my Tab???
anyone can tell me any steps please??
Maybe try this:
http://forum.xda-developers.com/showthread.php?t=885919&highlight=reset+battery
interesting information but i need to research much more
http://forum.xda-developers.com/showthread.php?t=819551
Reediting:
I try with Android SDK and ADB reading this little tutorial
http://mingersoft.com/blog/2010/09/samsung-galaxy-s-why-download-and-recovery-modes-are-missing/
When I plug it into my computer it tries to install a driver for "SEC S5PC110 Test B/D"
any one have a copy of this driver, or can create one for this proposit????
Does the device power on and show anything on the screen? If the Tab won't even turn on then you are bricked but not to worry.. I did the same to mine, and samsung has repaired the device and its on its way home to me today.
i think the better idea is call samsung, wait 2 or 3 weeks.......
but i want know more about some info posted in this thread
perhaps, how and where are the first person whit this Driver, or the first or second with a custom cable jig Compatible with Galaxy Tab and can post where are the steps to do it in da home
When i finish instal room in my phone, i reboot the phone
But my phone stuck in gal y duos logo
And now i want to flash my phone to stock room bye odin
But odin cannot deteck my phone, i have instal usb driver
I try to charge my phone batrey, its not work
Give me solutions, please
ululpotter said:
When i finish instal room in my phone, i reboot the phone
But my phone stuck in gal y duos logo
And now i want to flash my phone to stock room bye odin
But odin cannot deteck my phone, i have instal usb driver
I try to charge my phone batrey, its not work
Give me solutions, please
Click to expand...
Click to collapse
Do you have any CWM backup?
Sent from my GT-S5300 using Tapatalk 2
connect your phone in PC go Odin mode not press up volume now!!
go to PC open Odin now you press volume up its doesn't work download USB drive for you phone http://forum.xda-developers.com/showthread.php?t=2448749
ululpotter said:
When i finish instal room in my phone, i reboot the phone
But my phone stuck in gal y duos logo
And now i want to flash my phone to stock room bye odin
But odin cannot deteck my phone, i have instal usb driver
I try to charge my phone batrey, its not work
Give me solutions, please
Click to expand...
Click to collapse
Its a hardware problem.. The only option you have is thru CWM if you have a nandroid backup of your stock.rom you can restore it
Dear all,
I have only recently lost my IMEI und tried everything to recover it. As a matter of fact I had made a backup before and tried to restore it and it didn't work. Today, I tried doing that another time and after that I wanted to reboot my phone but after it shut down it just doesn't boot up anymore. It shows nothing, only the black screen. It seems like it doesn't react to anything, I also tried to pull the battery but that also wasn't successful. I also can't get into Download Mode.
Any ideas what I could do?
Charge the battery or try another battery first .
I did both, I charged the battery but it didn't help and I also tried another (fully charged) battery, without success.
try to connect with kies 3
Kies doesn't recognize my phone.
Service centre repair your next step .
I'll let my carrier send it to Samsung and tell them that it crashed after trying to update to Lollipop via Kies, I read that this worked in some cases. If it doesn't I'll have to have it repaired.
What do you guys think about those "USB jigs"? Do you think those could help me with my problem?
YAAAAY!
Thanks to this thread http://forum.xda-developers.com/showthread.php?t=2625332 I was able to unbrick my device and by flashing a new PIT-File and a Stock ROM even my IMEI came back. I think my partition was somehow messed up because after flashing the PIT-File it began to work properly, but I flashed the Stock ROM to have a "clean" system again and installed Cyanogenmod afterwards with success.
So how does this fix work if the phone is unable to connect or power on ..
OP yes try the usb recovery jig to see if it boots to download mode .
Well, it did help. After I had put the Image on my SDcard and removed my SIM card I was able to boot my phone, this was the main issue. The rest was child's play, I flashed the PIT-file and a stock ROM and everything was working fine again.
flash new PIT file
hi you got to flash a new pit flie. maybe something damaged your phone boot. look in here
http://forum.xda-developers.com/showthread.php?t=2625332
can anyone help me with my problem?!...
earlier today, i tried to upgrade my grand 2 from 4.3 to 4.4.2 via odin.
I downloaded all the required files and started the process, i got my phone into download mode and plugged it in my pc (i used a cheap usb cable) and pressed start.
after 30 seconds it stopped and failed the upgrade.
i tried to flash it again and it was the same.
now my phone won't even boot or charge or enter download mode.
PLEASE HELP!
sorry for the long post.
Its ok brother...it happens...and i dont think so its becuz of cheap usb cable i think its becuz ur ROM was not properly downloaded!
Now as becuz u cant go to download mode...try going to recovery and reset your phone ! if you get successfuldo that...i think you'll be able to boot to download mode #likemypostifyoufeltok
I just bought a BNIB Note 3.
Samsung Note 3: SM-N900W8
Symptoms: Won't turn on, no lights, no load screen, no recovery mode, no download mode.
When I hook the phone up to the PC via USB it does vibrate and sounds the connection ringtone
What I was doing when this happened:
I had just recently rooted using "KINGRoot" - checked root and it was successful
I installed "TWRP" and booted into recovery mode and it was a success as well(I didn't actually run here yet)
***I installed and opened "Flashfire" to Flash the LINEAGE OS to my Rom buuut I didn't actually select the Lineage pack and I accidently pressed FLash(insert expletive here) *****
So Flashfire went through it's loading and when it was done it shut off and then the symptoms started.
It's a Note3 from Bell with all of their bloatware on it and I wanted to clean it all off and run a clean/efficient Note 3 cell with Rogers. I'm not looking to keep any of the data currently on the phone as there isn't anything currently on it. I just want to be able to install Lineage and use my Note.
I've searched for 30 hours pretty solid so far and unfortunately I haven't come across a clear solution. Can anyone give me a diagnosis and a tutorial or a link to a fix.
I'm open to loading from MicroSD, USB Jig, Samsung Kies....anymore information you require from me as away and I'll get back ASAP
Dead battery would be first check .
JJEgan said:
Dead battery would be first check .
Click to expand...
Click to collapse
Battery - I did the "spin" test on the battery and it doesn't show any physical characteristics of an overheated(bulged) battery. I'm going to test fit my battery into another note3 and I'll respond asap.
JJEgan said:
Dead battery would be first check .
Click to expand...
Click to collapse
I tried the battery in another Note3 and my battery is 52% charged and had no issues booting the tester phone.
I have the phone being tested for any Hardware issues right now.
If it's not a hardware issue will I be able to force a Rom(whether OEM Firmware or other) to install via MicroSD or USB jig?
When the phone is connected to a Windows machine, does a new device appear in device manager?
Have you tried to force it into download mode with a USB jig?
For flashing ROMs to the sm-n900w8, the simplest method is to flash TWRP, boot to TWRP, wipe everything, and flash the desired ROM.
If nothing works, you could take it to a cell repair shop and hopefully have it repaired with a jtag cable or a similar method.
audit13 said:
When the phone is connected to a Windows machine, does a new device appear in device manager?
Have you tried to force it into download mode with a USB jig?
For flashing ROMs to the sm-n900w8, the simplest method is to flash TWRP, boot to TWRP, wipe everything, and flash the desired ROM.
If nothing works, you could take it to a cell repair shop and hopefully have it repaired with a jtag cable or a similar method.
Click to expand...
Click to collapse
No, the PC doesn't see the phone.
The USB jig or MicroSD force is something I'm researching to try next(feel free to provide any good links to set up a jig(I've done this with Ubuntu on my laptop but this has a more intimidating feel to it)). The Tech at the shop I took it to test the hardware says "the motherboard" is broken and he'll fix it for $60.
For future considerations I'll learn to use TWRP flashing ROMs.
If the shop is offering to fix it for $60, they may be just force-flashing the firmware with something like an Octopusbox.
The USB jig may force the phone into download. If it doesn't, I don't think you'll have a choice but to pay to have it flashed. Unfortunately, Samsung will not help as rooting would trip the knox counter.
USB jig ebay are the usual cheap source.