Database Users

[Q] DX stuck in stock bootloader/recover? HELP!!!!!

I was running the Fission 2.4.3 rom and it was having some problems because I read that it was because I was running on 2.2.1 kernel and I downloaded 2.3.340 Kernel Updater (2.6.32.9-g55626e1) and BP_C_1.09.07P Baseband Updater (also known as your radio file) from http://www.mydroidworld.com/forums/...ystem-baseband-2-3-340-kernel-bootloader.html then I installed both of those, now when I boot up to the Bootloader 30.03, it says, err:A5,70,00,00,23 Battery OK OK to Program Connect USB Data Cable. The phone also lets me boot in to the stock recovery by pressing Power and Home. Please help me I need help and I cant figure it out.

You should be on Bootloader 30.04. I would suggest grabbing the full .320 SBF, and the system-only .340 SBF, then flashing them both in order. After flashing them both go into the Motorola recovery and do a factory reset.
-----
Sent from my Droid X. Powered by Big Red, customized by NATF.

How do I do the SBF thing if I can only get in to the Bootloader 30.03 screen and the stock recovery screen. I have the clockwork recovery installed but i cant get to it. HELP

SBF is done from the bootloader menu you are already in. This link will help you with the process. If you are still on the original Froyo OTA, you will need the .320 Full SBF, and the .340 System-Only SBF. I cannot provide links to them due to a C&D notice, but they are not hard to find using Google.

[Q] Defy problem ( kind of bricked )

So, my defy had had Cm7 with android 2.3.7 installed. I don`t know what i did but i installed android 2.1 ( update 1 ) on it ( ) i know ... this is bad ).
Right now, i can`t install any android above 2.1.1 even though i read on the forum about simillar situations like mine.
This evening, something happened and my defy won`t boot up... enters into an continous loops and stays right there . Don`t know what to do ... i just want to install CM7 again ...
Any suggestions ? What should i do ...
If i try to flash android 2.2.1 or 2.2.2 the phone stops at the motorola red logo ... i can`t make hard reset ... nor wipe data/cache from the bootmenu ( the phone is restarting )...
I neeeeddd heeelpppp !

Oh ... and if i install this -http://forum.xda-developers.com/showthread.php?t=1093352 - or any other sbf it won`t boot
It works only with JORDN_U3_97.21.51

Keep the one work and start from there, full wipe and flash 2.2.2.

Can you give me a link with that 2.2.2 that you suggest I should install? Please

You can use stock froyo ROMS from: forum.xda-developers.com/wiki/index.php?title=Motorola_Defy

won`t boot up ... only with JORDN_U3_97.21.51 is booting up ). so , i downgraded from 2.3.7 to 2.1 update 1. what to do nowwww ?

I had a similar problem with my Defy. I solved the problem by flashing the Gingerbread ROM 2.3.4/4.5.1-134 as nandroid backup + fixed sbf. After that i flashed the Froyo (o2) sbf back and finally got it booted up.

yep ... i finally solved it. if anyone have the same problem as me -> http://forum.xda-developers.com/showpost.php?p=15341774&postcount=8

This happened to you because JORDN_U3_97.21.51 is 2.1 eclair with CG39.smg and CG31.smg version 5. Once you flash a version 5 CG set you are stuck on version 5. This is the same CG version as the leaked 2.3.4 sbf's. The ONLY sbf's you can flash from now on are JORDN_U3_97.21.51 and the full 2.3.4 sbf's. To switch to any other rom you will need to restore THAT roms nandroid, and then create a fixed sbf from THAT rom by depacking THAT sbf and deleting CG39.smg and replace CG31.smg with CG31.smg from 2.3.4 sbf. Repack it and flash this fixed sbf.
I know its obviously too late but for anyone reading this who wants to downgrade from a froyo sbf to an eclair sbf can flash US Tmobile eclair 2.1 sbf found here http://sbf.droid-developers.org/umt...1028.0R_JORDANTMO_P022_HWp3_Service1FF.sbf.gz This eclair sbf shares CG version=4 just like froyo sbf's. I'm not sure if any other eclair sbf's contain CG=4 as I'm only familiar with US Tmobile eclair sbf. But I believe all other eclair sbf's have CG=3

[Q] need defy help please

ok, so i have a defy i rooted it and tried to change boot logo and i misplaced the file and it wouldnt turn on or boot.
so i plug it into my pc and it is recognised by rsd lite and a white led shows up on my defy.
i go to flash a rom and it doesnt work.
it turns the little green picture red and then fails.
Any chance of me being able to actually getting it to work.
i have resarched loads of ways and nothing seems to help, hence why i posted here. thankyou

ROM (in a zip file) or SBF file? RSD Lite will only accept SBF files!
If you are using a SBF file, is the CG version greater than or equal to what you had before? For example you can't flash a Froyo SBF after flashing Gingerbread.

i used the .SBF
i was on froyo trying to flas another version of it, so i need flash a gingerbread rom?

can anyone else give me a hand?

Does it have clock work mod recovery installed

no it doesn't, im guessing its screwed?

no your not, just flash the stock froyo image (.sbf file) with rsd lite and then erase data trough stock recovery and it should start normally
ps: i used this one
http://forum.xda-developers.com/showpost.php?p=14564962&postcount=13
hope it helps.

cheers
if this works your a baws

Install official Indian Froyo 2.2.2 from http://www.mirrorcreator.com/files/HRXSSAXE/ using RSDLite if you have not installed any new version of 2.3 GB

popcorn1122 said:
Install official Indian Froyo 2.2.2 from http://www.mirrorcreator.com/files/HRXSSAXE/ using RSDLite if you have not installed any new version of 2.3 GB
Click to expand...
Click to collapse
muhahahahaha

[Q] My Defy is not Booting after flashing .sbf, please need your help.....

Hey guys, i flashed several .sbf to my defy through RSD like .sbf of defy+ and uk 2.3.5 but none of them worked for me.
And now my defy is not booting even with the original .sbf that is 2.2
Please help......................
I love my defy..http://media.xda-developers.com/images/icons/icon9.gif

if you have installed new version of FULL sbf which is not downgradable then u r stuck...
check this URL for more to some how revert back ...
http://forum.xda-developers.com/wiki/Motorola_Defy

please be more appropriate please........... tell me how do i get my defy in normal mode....
what should i do?????/

please guys help me..........................

neerajbisht1988 said:
please guys help me..........................
Click to expand...
Click to collapse
If all depends on the kind of SBF that you flashed. If you have flashed a FULL sbf then you can't downgrade most likely. If you flashed a FIXED sbf then downgrading shouldn't be a problem.
I made the same mistake in the beginning but luckily I only flashed a FULL 2.2 sbf which is stable. For now I always start from this rom, get root on my phone using superoneclick, install 2ndinit, reboot into 2ndinit recovery (volume down when led turns blue) and I install the nandroid backup that I placed on My SD card using "install from zip".
It would help if you gave some more info on which sbf you flashed?

RSDLITE(WINXP)->sfb 2.2.2
Sent from my MB525 using XDA App

Links
have similar problem ...
cant paste external links yet so if u wanna try what i did PM me

Black Screen [Flashed Wrong SBF] need help for warranty

Hey Guys, I know that there is a tutorial for this but i couldn't figure it out, I am having a Green Lens Defy, I have a broken display so.. I need to send it to service.
- I had a custom ROM on it
- Flashed Froyo_CEE_2.2.2 and the screen is black now
- Tried JORDN_U3_97.21.51 but no success
- I need to have the Froyo_CEE_2.2.2 on my device because it is the official ROM in Romania
Thx in advanced

go to bootloader
Flash 2.2.2 froyo sbf with rsd lite.
after that go to stock recovery, wipe data/chage than reboot yor phone
go to bootloader and flash 2.2.2 froyo sbf with rsd lite.
And it will boot up.

Blazs said:
go to bootloader
Flash 2.2.2 froyo sbf with rsd lite.
after that go to stock recovery, wipe data/chage than reboot yor phone
go to bootloader and flash 2.2.2 froyo sbf with rsd lite.
And it will boot up.
Click to expand...
Click to collapse
This way will not work in this case. As he flashed Chinese eclair (JORDN_U3_97.21.51) with BL5, he has no way back to froyo, which is BL4