After flashing this SBF : Android 2.3.6 Blur_Version.45.0.2310.MB526.Retail.en.GB (cause of somehow softbricked Defy) i am not able to change ROMS...every time i try the process either fails or makes an infinite boot with motorola logo...Help?
PerryTrademark said:
After flashing this SBF : Android 2.3.6 Blur_Version.45.0.2310.MB526.Retail.en.GB (cause of somehow softbricked Defy) i am not able to change ROMS...every time i try the process either fails or makes an infinite boot with motorola logo...Help?
Click to expand...
Click to collapse
flash other SBF,
if u have mb525 flash android 2.1 not 2.3.6
Rawwr said:
flash other SBF,
if u have mb525 flash android 2.1 not 2.3.6
Click to expand...
Click to collapse
I have MB526...but i'll try another SBF as you said, thx for the reply!
Related
Hi
i was on cm 7.2 nightly with the old kernel...i then wanted to flash blur 2.3.6 Defy+ full sbf cause i dont wanna downgrade anymore....but now i am screwed...
after flashing i get Bootloader screen again...showing
09.10
Err: A5,69,35,00,27
Batt Ok
Ok to program
Transfermode
USB
I tried the steps in the dev section with flashing a special sbf with cg 5 in it but hat didnt work either... all i get now is a phone thats boots in bootlaoder and shows error message... no way to get into recovery mode...
I know it was stupid not to flash a clean 2.2 before doing this...
Please is there anything that can be done or is my phone gone for good...
Trying older sbf dont work either...just black screen....
have you tried flashing special eclair sbf full
try this method may help
http://forum.xda-developers.com/showthread.php?t=1152377
yes i tried that but not working since the CG version is 6 on the 2.3.6 sbf....
BUT guess what...sice i had nothing to loose...is just tried another 2.3.6. sbf and this ones WORKS....
YESSSS!!!! So damn relieved...Phewww close one.....
Just flashed 4.5.1-134-DFP-132-O2-Germany full Blur this one over the one that gave me the error and it WORKS....
Can be closed.....
ace-drink said:
yes i tried that but not working since the CG version is 6 on the 2.3.6 sbf....
BUT guess what...sice i had nothing to loose...is just tried another 2.3.6. sbf and this ones WORKS....
YESSSS!!!! So damn relieved...Phewww close one.....
Just flashed 4.5.1-134-DFP-132-O2-Germany full Blur this one over the one that gave me the error and it WORKS....
Can be closed.....
Click to expand...
Click to collapse
Probably the one you tried was just corrupted hehe, good to see you got it sorted.
And yeah, the special Eclair SBF wont work since all these new Defy+ Roms come with CG6, and that one is CG5.
ace-drink said:
Hi
i was on cm 7.2 nightly with the old kernel...i then wanted to flash blur 2.3.6 Defy+ full sbf cause i dont wanna downgrade anymore....but now i am screwed...
Click to expand...
Click to collapse
Hi, ace, I had a 2.3.6 Defy+ and got screwed too, by flashing a 2.3.4 custom ROM without being aware of the locked bootloader / no-downgrade lock.
Please, where did you find stock ROM / sbf file for 2.3.6 Defy+ ? I need it but can't find it
EDIT: nvm. I found it myself =)
Hi guys, apologies for flooding other threads as well
I'm having the same error on bootloader. i've tried flashing several Stock SBF files from http://sbf.droid-developers.org/umts_jordanplus/list.php but still stucked on the same error in bootloader. Please help
extremeoverlord said:
Hi guys, apologies for flooding other threads as well
I'm having the same error on bootloader. i've tried flashing several Stock SBF files from http://sbf.droid-developers.org/umts_jordanplus/list.php but still stucked on the same error in bootloader. Please help
Click to expand...
Click to collapse
try flashing this bl7 firmware to your defy
http://sbf.droid-developers.org/umts_jordanplus/DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf.gz
make sure your battery is charged.[>70%]
deepak251146 said:
try flashing this bl7 firmware to your defy
http://sbf.droid-developers.org/umts_jordanplus/DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf.gz
make sure your battery is charged.[>70%]
Click to expand...
Click to collapse
Hi, I still have the same error
Questions go in the Q&A section
Look at aces kernel version...it must be the most latest sbf he had flashed..
Sent from my MB526 using Tapatalk 2
I flashed full SBF (4.5.1-134-DFP-132) on my Defy MB525 phone. What can i do?
I known ....no downgrade, but can i install any other MOD without stock rom ?
if so how? and what kind version ?
sorry my bad english. thanks.
szisze said:
I flashed full SBF (4.5.1-134-DFP-132) on my Defy MB525 phone. What can i do?
I known ....no downgrade, but can i install any other MOD without stock rom ?
if so how? and what kind version ?
sorry my bad english. thanks.
Click to expand...
Click to collapse
you can flash
ms2 ginger
argentstone
cm7 for defy +
cm9 for défy +
and all version 2.3.6
Thanks,
You were right, but became a new solution.
Yes! I have Froyo 2.2. Thanks to dlhxr.
http://forum.xda-developers.com/showthread.php?t=1486731
It works.
i m currently on motoginger_teaser_v.5 rom
vishweth said:
i m currently on motoginger_teaser_v.5 rom
Click to expand...
Click to collapse
Do you flash defy or defy plus? since motoginger has gb kernel you have to flash defy + build or defy build together with latest froyo kernel.
Did you make a factory reset?
Please post whats steps did you performed?
Which Defy do you have Normal Defy or Defy+?
Did you wipe CAche and Dalvik Cache?
Which Kernel you were using?
sami2704 said:
Please post whats steps did you performed?
Which Defy do you have Normal Defy or Defy+?
Did you wipe CAche and Dalvik Cache?
Which Kernel you were using?
Click to expand...
Click to collapse
defy red lens
yes i did wipe cache and dalvik cache
i flased froyo kernel
merhans said:
Do you flash defy or defy plus? since motoginger has gb kernel you have to flash defy + build or defy build together with latest froyo kernel.
Did you make a factory reset?
Click to expand...
Click to collapse
i did try flashing both defy and defy+ builds with latest froyo kernel but gets stuck at m logo
but when i try wid cm9 kernel i go back to old rom
bootloop!
I installed 120711 cm9 nightly by epsylon3 on my stock sea froyo nd got bootloops after 1st restart.
Then i tried with cee froyo nd still getting bootloops after restart.
I have green lens(soc) defy
vishweth said:
i m currently on motoginger_teaser_v.5 rom
Click to expand...
Click to collapse
make sure you flash the right kernel,
this problem generaly comes when you have wrong kernel installed,
check on your rom thread
manishgkasera said:
make sure you flash the right kernel,
this problem generaly comes when you have wrong kernel installed,
check on your rom thread
Click to expand...
Click to collapse
can u plz link me to proper files to flash?
will sm1 plz hlp me out
Can you please link me to the SBF you flashed for the motoginger rom?
Did you flash any FULL SBF's?
stroniz upon
Cman41 said:
Can you please link me to the SBF you flashed for the motoginger rom?
Did you flash any FULL SBF's?
Click to expand...
Click to collapse
yes i did a full sbf flash
vishweth said:
yes i did a full sbf flash
Click to expand...
Click to collapse
Tell me what SBF you flashed.
And you said you have red lense and used froyo kernel. I guess that's why you have problems. You should have used GB kernel
You will need to follow this thread, first post strictly and put attention to where its written red lense and perform the correct actions.
But before that in order to get your phone up again you will need to flash some GB rom, but again, i need you to tell me which SBF's you flashed so far??
Can i install stock 2.3.6 from defy+ on my mb525? I m currently on quarx cm10.
Sent from my MB525 using xda app-developers app
ashish21099 said:
Can i install stock 2.3.6 from defy+ on my mb525? I m currently on quarx cm10.
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
yes you can but is not indicated
dont flash a full SBF 2.3.6 Defy+ on your phone becouse you will upgrade the bl version and cant go back if you need it for waranty or something else.
use a fixed SBF of 2.3.6 Defy+, in this way you will not affect the bl version
ashish21099 said:
Can i install stock 2.3.6 from defy+ on my mb525? I m currently on quarx cm10.
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
If you have a Green Lens defy (as it says in your signature), don't ever flash a full defy+ SBF.The Camera won't work,and there's no way to fix it.
vaserbanix said:
yes you can but is not indicated
dont flash a full SBF 2.3.6 Defy+ on your phone becouse you will upgrade the bl version and cant go back if you need it for waranty or something else.
use a fixed SBF of 2.3.6 Defy+, in this way you will not affect the bl version
Click to expand...
Click to collapse
neo.ank said:
If you have a Green Lens defy (as it says in your signature), don't ever flash a full defy+ SBF.The Camera won't work,and there's no way to fix it.
Click to expand...
Click to collapse
Yes i know that i should not flash full sbf. i was just asking if there is any stock 2.3.6 (fixed sbf+nand backup) or maybe a flashable rom on cm7 kernel which is fully working(i.e. stable, rootable) on green lens mb525.
Also will i need greenbreadmod for flashing fixed sbf?? Also i have a class 6 sdcard so i might also need mmcfix.
Please ask all questions in the Q&A section. Thread moved there.
hello
i have defy+ (defyplus)
i installed froyo 2.2 (chinese) and WIUI ROM ...
after install this rom, my defy not work on usb..
i installed app mount SD and work sd card, but not work in bootloader on rsd lite...
removed drivers usb and reinstall drivers....but no work... :S
my S.O. is windows 8 64bits...
did wipe data/cache/dalvik/battery and install CM7 defyplus and not work, but defy work....
i open bootloader work but not work on RSD LITE...not detected
help me please ?
Defy+ DO NOT come with froyo kernel but with Gingerbread (GB)!!! You do a forced downgrade and is very difficult to restore. You need to restore the status of internal defy usb.
but i changed kernel froyo and after install gingerbread....
i after CM10
but
now
i installed froyo.. and ...brick .. ;(
TiagoRigueto said:
but i changed kernel froyo and after install gingerbread....
i after CM10
but
now
i installed froyo.. and ...brick .. ;(
Click to expand...
Click to collapse
You CAN'T downgrade from GB to Froyo. Must install a BL7 stock ROM (which is GB) even is necessary to repeat the operation. If stuck on boot pull out the battery, put on and enter in recovery and wipe data/cache + dalvik
pgreed said:
You CAN'T downgrade from GB to Froyo. Must install a BL7 stock ROM (which is GB) even is necessary to repeat the operation. If stuck on boot pull out the battery, put on and enter in recovery and wipe data/cache + dalvik
Click to expand...
Click to collapse
please can u tell me
how to choose SBF File for my device ?
please help me
Install BL7 rooted 231. You have defy geen or red or defy+? \
LINK: http://forum.xda-developers.com/showthread.php?t=1542956
for install WIUI ROM need froyo kernel...
so i installed froyo....in rsd light...
this is second again than i installed froyo....
my bootloader open, but not work with rsd light...
help me please?
my device is DEFY+ ...MB526....(CARRIER TIM BR)
TiagoRigueto said:
for install WIUI ROM need froyo kernel...
so i installed froyo....in rsd light...
this is second again than i installed froyo....
my bootloader open, but not work with rsd light...
help me please?
my device is DEFY+ ...MB526....(CARRIER TIM BR)
Click to expand...
Click to collapse
HEY is not clear?!? DO NOT flash Froyo on Defy+ because this device come with GingerBread on stock and is not possible to downgrade !!!
Flash ONLY GingerBread sbf !!! and after that operation you can flash ANY custom ROM you wanna by following the tutorials!
If I understood you correctly, you tried to install CM7 defy+ while you were on froyo? It won't work cause you need a gingerbread kernel for that. If you can enter CWM just install gingerbread kernel only, to make it work. You could install CM7 that is meant for a 'regular' defy if you are on froyo though.
TiagoRigueto said:
for install WIUI ROM need froyo kernel...
so i installed froyo....in rsd light...
this is second again than i installed froyo....
my bootloader open, but not work with rsd light...
help me please?
my device is DEFY+ ...MB526....(CARRIER TIM BR)
Click to expand...
Click to collapse
You are wrong. Defy+ version with gb kernel of WIUI is available.
Sent from my MB525 using Tapatalk 2
Hallo
---------- Post added at 12:05 PM ---------- Previous post was at 12:00 PM ----------
I need to cusrom Defy mb525 gb kernel 3.1.27 wajkiui if anyone can help?