phone stuck at m logo after flashing ics 4.0.4 - Defy Q&A, Help & Troubleshooting

i m currently on motoginger_teaser_v.5 rom

vishweth said:
i m currently on motoginger_teaser_v.5 rom
Click to expand...
Click to collapse
Do you flash defy or defy plus? since motoginger has gb kernel you have to flash defy + build or defy build together with latest froyo kernel.
Did you make a factory reset?

Please post whats steps did you performed?
Which Defy do you have Normal Defy or Defy+?
Did you wipe CAche and Dalvik Cache?
Which Kernel you were using?

sami2704 said:
Please post whats steps did you performed?
Which Defy do you have Normal Defy or Defy+?
Did you wipe CAche and Dalvik Cache?
Which Kernel you were using?
Click to expand...
Click to collapse
defy red lens
yes i did wipe cache and dalvik cache
i flased froyo kernel

merhans said:
Do you flash defy or defy plus? since motoginger has gb kernel you have to flash defy + build or defy build together with latest froyo kernel.
Did you make a factory reset?
Click to expand...
Click to collapse
i did try flashing both defy and defy+ builds with latest froyo kernel but gets stuck at m logo
but when i try wid cm9 kernel i go back to old rom

bootloop!
I installed 120711 cm9 nightly by epsylon3 on my stock sea froyo nd got bootloops after 1st restart.
Then i tried with cee froyo nd still getting bootloops after restart.
I have green lens(soc) defy

vishweth said:
i m currently on motoginger_teaser_v.5 rom
Click to expand...
Click to collapse
make sure you flash the right kernel,
this problem generaly comes when you have wrong kernel installed,
check on your rom thread

manishgkasera said:
make sure you flash the right kernel,
this problem generaly comes when you have wrong kernel installed,
check on your rom thread
Click to expand...
Click to collapse
can u plz link me to proper files to flash?

will sm1 plz hlp me out

Can you please link me to the SBF you flashed for the motoginger rom?
Did you flash any FULL SBF's?

stroniz upon
Cman41 said:
Can you please link me to the SBF you flashed for the motoginger rom?
Did you flash any FULL SBF's?
Click to expand...
Click to collapse
yes i did a full sbf flash

vishweth said:
yes i did a full sbf flash
Click to expand...
Click to collapse
Tell me what SBF you flashed.
And you said you have red lense and used froyo kernel. I guess that's why you have problems. You should have used GB kernel
You will need to follow this thread, first post strictly and put attention to where its written red lense and perform the correct actions.
But before that in order to get your phone up again you will need to flash some GB rom, but again, i need you to tell me which SBF's you flashed so far??

Related

[Q] Think i killed my defy by flashing Defy+ sbf..Help me!

Hi
i was on cm 7.2 nightly with the old kernel...i then wanted to flash blur 2.3.6 Defy+ full sbf cause i dont wanna downgrade anymore....but now i am screwed...
after flashing i get Bootloader screen again...showing
09.10
Err: A5,69,35,00,27
Batt Ok
Ok to program
Transfermode
USB
I tried the steps in the dev section with flashing a special sbf with cg 5 in it but hat didnt work either... all i get now is a phone thats boots in bootlaoder and shows error message... no way to get into recovery mode...
I know it was stupid not to flash a clean 2.2 before doing this...
Please is there anything that can be done or is my phone gone for good...
Trying older sbf dont work either...just black screen....
have you tried flashing special eclair sbf full
try this method may help
http://forum.xda-developers.com/showthread.php?t=1152377
yes i tried that but not working since the CG version is 6 on the 2.3.6 sbf....
BUT guess what...sice i had nothing to loose...is just tried another 2.3.6. sbf and this ones WORKS....
YESSSS!!!! So damn relieved...Phewww close one.....
Just flashed 4.5.1-134-DFP-132-O2-Germany full Blur this one over the one that gave me the error and it WORKS....
Can be closed.....
ace-drink said:
yes i tried that but not working since the CG version is 6 on the 2.3.6 sbf....
BUT guess what...sice i had nothing to loose...is just tried another 2.3.6. sbf and this ones WORKS....
YESSSS!!!! So damn relieved...Phewww close one.....
Just flashed 4.5.1-134-DFP-132-O2-Germany full Blur this one over the one that gave me the error and it WORKS....
Can be closed.....
Click to expand...
Click to collapse
Probably the one you tried was just corrupted hehe, good to see you got it sorted.
And yeah, the special Eclair SBF wont work since all these new Defy+ Roms come with CG6, and that one is CG5.
ace-drink said:
Hi
i was on cm 7.2 nightly with the old kernel...i then wanted to flash blur 2.3.6 Defy+ full sbf cause i dont wanna downgrade anymore....but now i am screwed...
Click to expand...
Click to collapse
Hi, ace, I had a 2.3.6 Defy+ and got screwed too, by flashing a 2.3.4 custom ROM without being aware of the locked bootloader / no-downgrade lock.
Please, where did you find stock ROM / sbf file for 2.3.6 Defy+ ? I need it but can't find it
EDIT: nvm. I found it myself =)
Hi guys, apologies for flooding other threads as well
I'm having the same error on bootloader. i've tried flashing several Stock SBF files from http://sbf.droid-developers.org/umts_jordanplus/list.php but still stucked on the same error in bootloader. Please help
extremeoverlord said:
Hi guys, apologies for flooding other threads as well
I'm having the same error on bootloader. i've tried flashing several Stock SBF files from http://sbf.droid-developers.org/umts_jordanplus/list.php but still stucked on the same error in bootloader. Please help
Click to expand...
Click to collapse
try flashing this bl7 firmware to your defy
http://sbf.droid-developers.org/umts_jordanplus/DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf.gz
make sure your battery is charged.[>70%]
deepak251146 said:
try flashing this bl7 firmware to your defy
http://sbf.droid-developers.org/umts_jordanplus/DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf.gz
make sure your battery is charged.[>70%]
Click to expand...
Click to collapse
Hi, I still have the same error
Questions go in the Q&A section
Look at aces kernel version...it must be the most latest sbf he had flashed..
Sent from my MB526 using Tapatalk 2

[Q] Yes, I flashed V6 full sbf (4.5.1-134-DFP-132), what can i do?

I flashed full SBF (4.5.1-134-DFP-132) on my Defy MB525 phone. What can i do?
I known ....no downgrade, but can i install any other MOD without stock rom ?
if so how? and what kind version ?
sorry my bad english. thanks.
szisze said:
I flashed full SBF (4.5.1-134-DFP-132) on my Defy MB525 phone. What can i do?
I known ....no downgrade, but can i install any other MOD without stock rom ?
if so how? and what kind version ?
sorry my bad english. thanks.
Click to expand...
Click to collapse
you can flash
ms2 ginger
argentstone
cm7 for defy +
cm9 for défy +
and all version 2.3.6
Thanks,
You were right, but became a new solution.
Yes! I have Froyo 2.2. Thanks to dlhxr.
http://forum.xda-developers.com/showthread.php?t=1486731
It works.

[Q] ms2ginger3.0

Hi all
i have installed cm7 stable on my defy with 179 kernel
I want to change to MS2GINGER 3.0 rom recently
Should i need to downgrade to 177 kernel (official rom)
or i can just flash MS2GINGER3.0 with 179 kernel?
fwekj said:
Hi all
i have installed cm7 stable on my defy with 179 kernel
I want to change to MS2GINGER 3.0 rom recently
Should i need to downgrade to 177 kernel (official rom)
or i can just flash MS2GINGER3.0 with 179 kernel?
Click to expand...
Click to collapse
You need not downgrade! Just download nandroid back up of MS2ginger 2.1. Boot into recovery, full data wipe/cache, davik, and restore system+data,boot,devtree and recovery. !! Reboot !!
To upgrade to MS2ginger 3.0, boot into recovery, wipe cache/dalvik and restore system only.
MS2GINGER
premaca said:
You need not downgrade! Just download nandroid back up of MS2ginger 2.1. Boot into recovery, full data wipe/cache, davik, and restore system+data,boot,devtree and recovery. !! Reboot !!
To upgrade to MS2ginger 3.0, boot into recovery, wipe cache/dalvik and restore system only.
Click to expand...
Click to collapse
Can i install MS2GINGER3.0 directly?
fwekj said:
Can i install MS2GINGER3.0 directly?
Click to expand...
Click to collapse
No You cant install it directly. Because it contains only system partition and is meant for upgrade from 2.1.
Install 2.1 first then 3.0 system partition restore.. Just an additional step.
MS2GINGER
premaca said:
No You cant install it directly. Because it contains only system partition and is meant for upgrade from 2.1.
Install 2.1 first then 3.0 system partition restore.. Just an additional step.
Click to expand...
Click to collapse
lol
In this article, it didn't say that
http://forum.xda-developers.com/showthread.php?t=1140839
really confusing~
by the way, my defy is green lens
any other opinion?
I installed it directly from cm7. In the original release thread there is no word about downgrading it first to 2.1 . Now my Defy is bricked
Alright you realy have to install 2.1 first. Works for me now.
Z_E_R_O said:
I installed it directly from cm7. In the original release thread there is no word about downgrading it first to 2.1 . Now my Defy is bricked
Click to expand...
Click to collapse
really??!!
what version of cm7 do u installed, would it be the bootloader problem?
your 2.1 means android2.1 or ms2ginger2.1??
my cm7 is stable version with 179 kernel
Now i am more hesitating...
i send a pm to walter... but no respond...
Actually the whole ms2ginger flashing is explained in complicated manner in official thread as well as everywhere..it would be very helpful if someone posted noob step by step guide for noobs like us..just like there was noob guide for cm7..please can anyone take the initiative? ..u can keep it short, but keep it simple
bondx99 said:
Actually the whole ms2ginger flashing is explained in complicated manner in official thread as well as everywhere..it would be very helpful if someone posted noob step by step guide for noobs like us..just like there was noob guide for cm7..please can anyone take the initiative? ..u can keep it short, but keep it simple
Click to expand...
Click to collapse
I agree with u
can someone help?
fwekj said:
really??!!
what version of cm7 do u installed, would it be the bootloader problem?
your 2.1 means android2.1 or ms2ginger2.1??
my cm7 is stable version with 179 kernel
Now i am more hesitating...
i send a pm to walter... but no respond...
Click to expand...
Click to collapse
Don't worry, walter doesn't respond to my PMs about DFP-188 and DFP-231 either.
Do you have kernel from 2.2 rom or 2.3 rom?
Oh and btw tell me your cwm version that you have right now in cm7. If you have v4.x.x.x, you cannot change directly to ms2ginger. If you have v5.x.x.x it should work fine.
Hi.
I am currently on android 2.3.6 ROM ( nandriod backup) by adi4motion. my defy has green lens. can someone explain how to install walter rom on greenlens defy. I tried to read many times but its very confusing to understand for someone like me...
Any help would be appreciated.
when i wanted to go from miui to ms2ginger it didnt work but after i flasht an original rom and then ms2ginger it worked like a charm - so i think thats the best way if something doesnt work
Steps to install on greenlens defy?????
For greens lens defy there is a room called GGL ROM and its based on Walters 4.5.1-134dfp 231 sbf
Sent from my MB526 using XDA App
Out of following sbf from walter folder, which one should I use? (I m on CM7 satble froyo 2.2 kernel) (Green lens Defy)
3.4.2-179-froyo-fixed-sbf.sbf
4.5.1-134-DFP_132-fixed.sbf
4.5.2-109-DHT-22-fixed.sbf
4.5.3-109-fixed.sbf
I am already on GGL ROM by adi4motion.... Not happy with the camera as I get FC sometimes... also pictures are dark when taken....
bld03814 said:
I am already on GGL ROM by adi4motion.... Not happy with the camera as I get FC sometimes... also pictures are dark when taken....
Click to expand...
Click to collapse
I m also on same ROM and now want to install MS2Ginger. Can I directly restore nanodroid backup via CWM? will it work?
Installed
Finally after 2 days, thrice flashing full SBF, I was able to install ms2ginger
here, what I did? (specifically for Defy with green lens)
1. Flashed full SBF (froyo kernel)
2. Installed Pikachu Edition 2.2.10
3. went to CWM and followed all the instruction given in MS2Ginger - Android 2.3.6 thread
run 2nd-init (voldown on blue LED)
Go to "Recovery"
Go to "Latest or Stable or Custom Recovery"
"wipe data and cache"
Go to "Backup and Restore"
Go to "Advance Restore"
Select "MS2Ginger3.0"
"restore system"
Go to "install zip from sdcard"
"Install "MS2Ginger-Greenbread.zip" via install zip" (only for defy with "green" soc camera and froyo kernel)
reboot.
run 2nd-init (voldown on blue LED)
Go to "System"
Go to "Overclock"
increase VSel3 to 58 (GREENBREADMOD-froyo kernel installed)
reboot
Booting up can take a while, max is about 10 minutes.
Charge your phone to 100% and keep it charging for min 1.5 hour after.
Done

[Q] Downgrading Defy BL7

Dear All Good Evening,
I have green lense defy (MB 525). Accidently I have flashed defy plus full sbf ( probably non downgradable ). I have tried many 2.2 Froyo SBF roms but all nothing has been worked out for me. Now my defy is on sbf of defy plus in which Camera is not working, Although I am able to root BL 7 & I am on CM9. Is their any hope to either BL7 based froyo sbf or any method to downgrade from BL7.
Please Help.... And Best of Luck ....:good:
Hi, sorry noway. Motorola must open the bootloader but theu like to be stupid.
Gesendet von meinem MB526
avi_tandel said:
Dear All Good Evening,
I have green lense defy (MB 525). Accidently I have flashed defy plus full sbf ( probably non downgradable ). I have tried many 2.2 Froyo SBF roms but all nothing has been worked out for me. Now my defy is on sbf of defy plus in which Camera is not working, Although I am able to root BL 7 & I am on CM9. Is their any hope to either BL7 based froyo sbf or any method to downgrade from BL7.
Please Help.... And Best of Luck ....:good:
Click to expand...
Click to collapse
Try latest CMX with custom kernel - that may solve the camera problem. Battery charging is working for you?
avi_tandel said:
Dear All Good Evening,
I have green lense defy (MB 525). Accidently I have flashed defy plus full sbf ( probably non downgradable ). I have tried many 2.2 Froyo SBF roms but all nothing has been worked out for me. Now my defy is on sbf of defy plus in which Camera is not working, Although I am able to root BL 7 & I am on CM9. Is their any hope to either BL7 based froyo sbf or any method to downgrade from BL7.
Please Help.... And Best of Luck ....:good:
Click to expand...
Click to collapse
It was astonishing for me, because I always thought, without changing the Kernel we never would be able to recognize the green lense. But with this CUSTOM ROM I can use my kamera like nothing happened. When you flash this Rom through CWM, be patient, when you reboot after flashing. It needs a long time to finish first booting. Just wait until you can see the regular Welcome screen.
Link to the Rom:
http://quarx2k.ru/cm10-2ndboot-night...HTLY-mb526.zip
Greetings from joma227 with DEFY 525 green lense and full flashed with dfp231 (BL7). I dont need downgrade any more.
Thanks a lot to Quarx.:laugh:
joma227 said:
It was astonishing for me, because I always thought, without changing the Kernel we never would be able to recognize the green lense. But with this CUSTOM ROM I can use my kamera like nothing happened. When you flash this Rom through CWM, be patient, when you reboot after flashing. It needs a long time to finish first booting. Just wait until you can see the regular Welcome screen.
Link to the Rom:
http://quarx2k.ru/cm10-2ndboot-night...HTLY-mb526.zip
Greetings from joma227 with DEFY 525 green lense and full flashed with dfp231 (BL7). I dont need downgrade any more.
Thanks a lot to Quarx.:laugh:
Click to expand...
Click to collapse
with DEFY 525 green lense and full flashed with dfp231 (BL7) camera is ok BUT BATTERY IN NOT ABLE TO CHARGE !!!
can u charge ur phone joma227?
Great news....Tested on green lense defy
jalal-jap said:
with DEFY 525 green lense and full flashed with dfp231 (BL7) camera is ok BUT BATTERY IN NOT ABLE TO CHARGE !!!
can u charge ur phone joma227?
Click to expand...
Click to collapse
:laugh: Ya I am able to charge , My camera works fine..
Full Credit Goes to Quarks...............
One doubt as kernels now changed can we flash roms for which base version of 2.2 required
for Eq. Jboogie Liquid Arc , Pop Corn etc or can we flash 2.2 nandroid back up now????
Any Solution
jalal-jap said:
with DEFY 525 green lense and full flashed with dfp231 (BL7) camera is ok BUT BATTERY IN NOT ABLE TO CHARGE !!!
can u charge ur phone joma227?
Click to expand...
Click to collapse
Yes I can. I have no problems with charging.
My Battery always show 100% or 1% .
whats ur step for flash rom or battery fix file?
Funny thing is, that bootmenu/recovery recognizes battery status but Android system wont.
Steps which I have followed on mb 525
jalal-jap said:
My Battery always show 100% or 1% .
whats ur step for flash rom or battery fix file?
Click to expand...
Click to collapse
I was on rooted sbf BL 7
Install 2nd init
go to custom recovery
wipe data / cashe / dalvik cashe
install quarks rom cm10 mb 525 *** optional
reboot
install quarks 2nd boot rom with kernel
install update for kernels
reboot
flash gapps minimal ** optional
reboot .. thats it done!!!!!
Above steps worked on my mb 525 on which i had wrongly flashed mb 526 sbf (non dow) & My camera was dead for 1 month Now its fine!!:laugh:
avi_tandel said:
I was on rooted sbf BL 7
Install 2nd init
go to custom recovery
wipe data / cashe / dalvik cashe
install quarks rom cm10 mb 525 *** optional
reboot
install quarks 2nd boot rom with kernel
install update for kernels
reboot
flash gapps minimal ** optional
reboot .. thats it done!!!!!
Above steps worked on my mb 525 on which i had wrongly flashed mb 526 sbf (non dow) & My camera was dead for 1 month Now its fine!!:laugh:
Click to expand...
Click to collapse
ok
I Do Ur Steps.
But My battery always show 1%.
ohhhhh.
joma227 said:
It was astonishing for me, because I always thought, without changing the Kernel we never would be able to recognize the green lense. But with this CUSTOM ROM I can use my kamera like nothing happened. When you flash this Rom through CWM, be patient, when you reboot after flashing. It needs a long time to finish first booting. Just wait until you can see the regular Welcome screen.
Link to the Rom:
http://quarx2k.ru/cm10-2ndboot-night...HTLY-mb526.zip
Greetings from joma227 with DEFY 525 green lense and full flashed with dfp231 (BL7). I dont need downgrade any more.
Thanks a lot to Quarx.:laugh:
Click to expand...
Click to collapse
Oh my GOD!!!! This is great news , i am amongst thousand others who committed the same mistake of flashing a MB526 rom on MB525 green lens phone and the end result a non working camera . I hope this works for me.
The link http://quarx2k.ru/cm10-2ndboot-night...HTLY-mb526.zip seems to be dead , gives a "404 Not found error" , Can someone please help me with the link to download the rom ?
Help with download link
avi_tandel said:
:laugh: Ya I am able to charge , My camera works fine..
Full Credit Goes to Quarks...............
One doubt as kernels now changed can we flash roms for which base version of 2.2 required
for Eq. Jboogie Liquid Arc , Pop Corn etc or can we flash 2.2 nandroid back up now????
Any Solution
Click to expand...
Click to collapse
Hi Avi,
Can you give me the link to the Rom that you downloaded. The link in the post seems to be inactive. Appreciate your help!!!
Link is as per below
@southpaw said:
Hi Avi,
Can you give me the link to the Rom that you downloaded. The link in the post seems to be inactive. Appreciate your help!!!
Click to expand...
Click to collapse
Happy to help.....
http://quarx2k.ru/cm10-2ndboot-nightly-defy(+)/CM10/20121018-NIGHTLY-MB526.zip
Although name is mb526 but the same can be used for mb 525:laugh::laugh::laugh:
avi_tandel said:
Happy to help.....
http://quarx2k.ru/cm10-2ndboot-nightly-defy(+)/CM10/20121018-NIGHTLY-MB526.zip
Although name is mb526 but the same can be used for mb 525:laugh::laugh::laugh:
Click to expand...
Click to collapse
Thank you so much for sharing this .....my camera is now working perfectly .....a million thanks to the developer of this rom
Link plz
avi_tandel said:
I was on rooted sbf BL 7
Install 2nd init
go to custom recovery
wipe data / cashe / dalvik cashe
install quarks rom cm10 mb 525 *** optional
reboot
install quarks 2nd boot rom with kernel
install update for kernels
reboot
flash gapps minimal ** optional
reboot .. thats it done!!!!!
Above steps worked on my mb 525 on which i had wrongly flashed mb 526 sbf (non dow) & My camera was dead for 1 month Now its fine!!:laugh:
Click to expand...
Click to collapse
please give me the link to quarks 2nd boot rom with kernel and for install update for kernels.
rajeshnitk said:
please give me the link to quarks 2nd boot rom with kernel and for install update for kernels.
Click to expand...
Click to collapse
http://quarx2k.ru/cm10-2ndboot-nightly-defy(+)/CM10-20121102-NIGHTLY-mb526.zip
FAQ available
The complete FAQ (including the neccessary links) can be found here..
avi_tandel said:
I was on rooted sbf BL 7
Install 2nd init
go to custom recovery
wipe data / cashe / dalvik cashe
install quarks rom cm10 mb 525 *** optional
reboot
install quarks 2nd boot rom with kernel
install update for kernels
reboot
flash gapps minimal ** optional
reboot .. thats it done!!!!!
Above steps worked on my mb 525 on which i had wrongly flashed mb 526 sbf (non dow) & My camera was dead for 1 month Now its fine!!:laugh:
Click to expand...
Click to collapse
i made the same mistake and have bl7 on my green lense defy. unfortunately, when ein try to install quarks rom cm10 for 525 or also 526, after the update the defy only boots to the red m, not showing any animations after that an d freezing. i can reach the standard motorola boot recovery (by pressing volume down), but it doesn't reach the blue led for the custom recovery.
any ideas or tips?
pgraf said:
i made the same mistake and have bl7 on my green lense defy. unfortunately, when ein try to install quarks rom cm10 for 525 or also 526, after the update the defy only boots to the red m, not showing any animations after that an d freezing. i can reach the standard motorola boot recovery (by pressing volume down), but it doesn't reach the blue led for the custom recovery.
any ideas or tips?
Click to expand...
Click to collapse
Reflash stock bl7 sbf and rooted bl7 sbf. You can't downgrade due to eFuse which prevents you downgrading bootloaders. Then install Defy 2nd init 2.3 (latest version) and put Quarx CM 10 on the root of sd card.

[Q] RSD LITE vs BOOTLOADER

hello
i have defy+ (defyplus)
i installed froyo 2.2 (chinese) and WIUI ROM ...
after install this rom, my defy not work on usb..
i installed app mount SD and work sd card, but not work in bootloader on rsd lite...
removed drivers usb and reinstall drivers....but no work... :S
my S.O. is windows 8 64bits...
did wipe data/cache/dalvik/battery and install CM7 defyplus and not work, but defy work....
i open bootloader work but not work on RSD LITE...not detected
help me please ?
Defy+ DO NOT come with froyo kernel but with Gingerbread (GB)!!! You do a forced downgrade and is very difficult to restore. You need to restore the status of internal defy usb.
but i changed kernel froyo and after install gingerbread....
i after CM10
but
now
i installed froyo.. and ...brick .. ;(
TiagoRigueto said:
but i changed kernel froyo and after install gingerbread....
i after CM10
but
now
i installed froyo.. and ...brick .. ;(
Click to expand...
Click to collapse
You CAN'T downgrade from GB to Froyo. Must install a BL7 stock ROM (which is GB) even is necessary to repeat the operation. If stuck on boot pull out the battery, put on and enter in recovery and wipe data/cache + dalvik
pgreed said:
You CAN'T downgrade from GB to Froyo. Must install a BL7 stock ROM (which is GB) even is necessary to repeat the operation. If stuck on boot pull out the battery, put on and enter in recovery and wipe data/cache + dalvik
Click to expand...
Click to collapse
please can u tell me
how to choose SBF File for my device ?
please help me
Install BL7 rooted 231. You have defy geen or red or defy+? \
LINK: http://forum.xda-developers.com/showthread.php?t=1542956
for install WIUI ROM need froyo kernel...
so i installed froyo....in rsd light...
this is second again than i installed froyo....
my bootloader open, but not work with rsd light...
help me please?
my device is DEFY+ ...MB526....(CARRIER TIM BR)
TiagoRigueto said:
for install WIUI ROM need froyo kernel...
so i installed froyo....in rsd light...
this is second again than i installed froyo....
my bootloader open, but not work with rsd light...
help me please?
my device is DEFY+ ...MB526....(CARRIER TIM BR)
Click to expand...
Click to collapse
HEY is not clear?!? DO NOT flash Froyo on Defy+ because this device come with GingerBread on stock and is not possible to downgrade !!!
Flash ONLY GingerBread sbf !!! and after that operation you can flash ANY custom ROM you wanna by following the tutorials!
If I understood you correctly, you tried to install CM7 defy+ while you were on froyo? It won't work cause you need a gingerbread kernel for that. If you can enter CWM just install gingerbread kernel only, to make it work. You could install CM7 that is meant for a 'regular' defy if you are on froyo though.
TiagoRigueto said:
for install WIUI ROM need froyo kernel...
so i installed froyo....in rsd light...
this is second again than i installed froyo....
my bootloader open, but not work with rsd light...
help me please?
my device is DEFY+ ...MB526....(CARRIER TIM BR)
Click to expand...
Click to collapse
You are wrong. Defy+ version with gb kernel of WIUI is available.
Sent from my MB525 using Tapatalk 2
Hallo
---------- Post added at 12:05 PM ---------- Previous post was at 12:00 PM ----------
I need to cusrom Defy mb525 gb kernel 3.1.27 wajkiui if anyone can help?

Categories

Resources