Kies 3 - Galaxy SM-9005 does not support - Galaxy Note 3 Q&A, Help & Troubleshooting

Hi guys.
Need your support and guidance on an issue with Kies 3. I have a Note 3 SM-9005, unrooted, unbranded/factory unlocked. So far, I have only received 2 updates via Kies. In other words, no tempering has been done.
However, now that I plugin my Note3 and run kies3, it says 'Galaxy Note3 (SM-N9005)' does not support.
Since I am unable to attach screenshots, I am posting necessary info below:
PDA: MJ7
Phone: MJ7
CSC: MJ4 (XSI)
(as per Kies, this is the latest firmware available as well)
Baseband Version : N9005XXUDMJ7
Build Number : JSS15J.N9005XXUDMJ7
Would appreciate any help.

Add|e said:
Hi guys.
Need your support and guidance on an issue with Kies 3. I have a Note 3 SM-9005, unrooted, unbranded/factory unlocked. So far, I have only received 2 updates via Kies. In other words, no tempering has been done.
However, now that I plugin my Note3 and run kies3, it says 'Galaxy Note3 (SM-N9005)' does not support.
Since I am unable to attach screenshots, I am posting necessary info below:
PDA: MJ7
Phone: MJ7
CSC: MJ4 (XSI)
(as per Kies, this is the latest firmware available as well)
Baseband Version : N9005XXUDMJ7
Build Number : JSS15J.N9005XXUDMJ7
Would appreciate any help.
Click to expand...
Click to collapse
try and uninstall kies and download again see if that works
if not do you have the phone on media device or camera

jaythenut said:
try and uninstall kies and download again see if that works
if not do you have the phone on media device or camera
Click to expand...
Click to collapse
Thanks for your input my friend. I have already tried your suggested remedy but the outcome is the same. Also, I have tried with the phone as media device.

Add|e said:
Thanks for your input my friend. I have already tried your suggested remedy but the outcome is the same. Also, I have tried with the phone as media device.
Click to expand...
Click to collapse
try developer options and turn on usb debugging

Add|e said:
Hi guys.
Need your support and guidance on an issue with Kies 3. I have a Note 3 SM-9005, unrooted, unbranded/factory unlocked. So far, I have only received 2 updates via Kies. In other words, no tempering has been done.
However, now that I plugin my Note3 and run kies3, it says 'Galaxy Note3 (SM-N9005)' does not support.
Since I am unable to attach screenshots, I am posting necessary info below:
PDA: MJ7
Phone: MJ7
CSC: MJ4 (XSI)
(as per Kies, this is the latest firmware available as well)
Baseband Version : N9005XXUDMJ7
Build Number : JSS15J.N9005XXUDMJ7
Would appreciate any help.
Click to expand...
Click to collapse
I believe it might be a problem with KIES 3 itself - it seems that it does not fully support any of the N9005 newer bootloaders (>= MJ3). I would have expected by now to have a better version but there is something strange going on there

xclub_101 said:
I believe it might be a problem with KIES 3 itself - it seems that it does not fully support any of the N9005 newer bootloaders (>= MJ3). I would have expected by now to have a better version but there is something strange going on there
Click to expand...
Click to collapse
That's pretty worrying. Does this also mean I won't be able to get further updates, especially kitkat, unless this issue is resolved?
@jaythenut: bro, have done that also, still no cigar

Add|e said:
That's pretty worrying. Does this also mean I won't be able to get further updates, especially kitkat, unless this issue is resolved?
Click to expand...
Click to collapse
No, the normal Samsung updates come Over The Air (OTA) directly to the phone and without the need for Kies (as long as you are not rooted, in which case you need to manually update - with Odin or Mobile Odin Pro).

xclub_101 said:
I believe it might be a problem with KIES 3 itself - it seems that it does not fully support any of the N9005 newer bootloaders (>= MJ3). I would have expected by now to have a better version but there is something strange going on there
Click to expand...
Click to collapse
xclub_101 said:
No, the normal Samsung updates come Over The Air (OTA) directly to the phone and without the need for Kies (as long as you are not rooted, in which case you need to manually update - with Odin or Mobile Odin Pro).
Click to expand...
Click to collapse
That's some relief. Thanks a lot bro!!!

Related

Cannot update Galaxy Tab !

This morning connected my Galaxy Tab to KIES and it prompted that there is an update !!
it took ages to download its binary files then finally after it got done, it gave me a decryption error !!
I have changed my sales code to gain access to market, could this be the problem or do i redownload the files !!
Isn't there a way to UPGRADE fw via OTA? or placing update.zip in root of sd nd flashing from recovery? (similar to HTC devices)
how do I upgrade to the latest version? help please
Cheers
Jackie
PS: Please find attached the firmware code : current and new !
Are you UK based Jackie? Just guessing as you said cheers! I've seen nothing this morning though have read there was an Android Market update which I had already downloaded and applied, maybe why I'm seeing no update.
no I'm based in UAE !! that's just teh way I speak !!
Ah right, nice to read it all the same, Cheers!
so anyone has any idea?
Jackie,
I don't bother with Kies.... It put my SGS in a right mess and couldn't be used until I sorted it out with another ROM and a different PC software upgrader by the name of Odin.
Your best bet is to go on over to samfirmware.com and check out the latest ROM's available.
I'm sending you also a link which although was written for the SGS and Froyo it's still relevant for ROM files for the Tab and how to use Odin.
See here:- How to use Odin to Upgrade the SGS to Froyo
Beards said:
Jackie,
I don't bother with Kies.... It put my SGS in a right mess and couldn't be used until I sorted it out with another ROM and a different PC software upgrader by the name of Odin.
Your best bet is to go on over to samfirmware.com and check out the latest ROM's available.
I'm sending you also a link which although was written for the SGS and Froyo it's still relevant for ROM files for the Tab and how to use Odin.
See here:- How to use Odin to Upgrade the SGS to Froyo
Click to expand...
Click to collapse
How do I know which is the latest ROM is for my TAB !
I checked out samfirmware, but it has loads of firmwares !
I'll check out what to do with ODIN though !
Thanks a lot
Cheers
jackie_jagger said:
How do I know which is the latest ROM is for my TAB !
I checked out samfirmware, but it has loads of firmwares !
I'll check out what to do with ODIN though !
Thanks a lot
Cheers
Click to expand...
Click to collapse
First, what ROM version do you currently have installed?
Next, look at the list of ROM's available see here.
You need to find out if you are on a European, Asian, Arabic, etc ROM and decide if you want to stay on that list or opt to another nation list.
For European lists JMA is the latest. There's a topic on JMA here.
PDA: P1000JPJJ2
Phone: P1000JXJJ1
CSC: P1000OJPJJ3
is what is being reported on *#1234# and samfirmware says this is the Arabic firmware and the latest for Arabic is P1000JVJL1 December 2010, not that I'm interested in any of the region specific apps - just wondering what has been fixed in these firmwares and also if flashing would delete all my data (I'm guessing it would)
I don't mind flashing a European firmware too, so which would be best?
PS: Tab is currently rooted with OCLF set ! =)
Cheers
Hi may i ask if you do firmware update does the tab have to be sim free not lock to a network as im on t-mobile uk, i dont want to brick my tab
thanks
jackie_jagger said:
PDA: P1000JPJJ2
Phone: P1000JXJJ1
CSC: P1000OJPJJ3
is what is being reported on *#1234# and samfirmware says this is the Arabic firmware and the latest for Arabic is P1000JVJL1 December 2010, not that I'm interested in any of the region specific apps - just wondering what has been fixed in these firmwares and also if flashing would delete all my data (I'm guessing it would)
I don't mind flashing a European firmware too, so which would be best?
PS: Tab is currently rooted with OCLF set ! =)
Cheers
Click to expand...
Click to collapse
It should not delete any data.
The browser and camera have been improved.
The browser now scrolls smoother.
The camera focus's much better.
No idea what other improvements have been made.
It does not really matter which firmware you wish to use BUT bear in mind a number of users who have performed a lagfix have had issues in upgrading the ROM.
You MUST ensure you remove any lagfix applied otherwise you stand a good chance in bricking the phone.
Also, ensure you have access to the Recovery and download mode.
You will need this if you 'brick' the phone.
ownhd2 said:
Hi may i ask if you do firmware update does the tab have to be sim free not lock to a network as im on t-mobile uk, i dont want to brick my tab
thanks
Click to expand...
Click to collapse
You need someone who is on a T-Mobile locked phone to answer this. I have heard of users on carrier networks who have run into issues.
Basically, unless you have a sound knowledge in what you are doing I would not attempt it until you get good solid advice.
seems like a long procedure, I'll hold off until i'm done with my exams....
also should I try KIES again? just in case ?? o.0
jackie_jagger said:
seems like a long procedure, I'll hold off until i'm done with my exams....
also should I try KIES again? just in case ?? o.0
Click to expand...
Click to collapse
You can try but I'd still make sure you have access to recovery and download first, just in case anything goes wrong.
Aight !! thanks a bunch !! will do
Got a similar problem... info says its P1000XXJID, valid euro firmware... Bought the tab in Hungary (Middle of europe), carrier free, and after looking at samfirmware.com's ROM list I was wondering about the updates.
Kies tells me this version can't be updated...
Can anyone help me with this problem?
Many, Many of us here in UK are having problems and are unsuccessful when trying to update/upgrade using Kies.
Hopefully Kies will get fixed properly to allow us all to use it.
ziffos said:
Many, Many of us here in UK are having problems and are unsuccessful when trying to update/upgrade using Kies.
Hopefully Kies will get fixed properly to allow us all to use it.
Click to expand...
Click to collapse
Even ActiveSync was better... at least it didn't offer the SW update...
to trick kies to update u could use kies registry patcher. I have sucsessfully updated via kies from jj3 -> jj7 (when no updates was availible)
read thru this post
http://forum.xda-developers.com/showthread.php?t=863386
Use the info from check fus and paste it in registry patcher, reboot pc - start kies - connect phone - something should happen.

Cannot update via Kies

Hello everyone,
I installed last week the German stock rom for Galaxy S4 GT-I9505.
Here are the details:
AP: I9505XXUEMJ5
CP: I9505XXUEMJ5
CSC: I9505OXAEMJ5
When I try to connect it via Kies and check for newer firmware I get the message that my firmware is not supported to update via Kies.
The status of the device is Official and the Knox is 0x0.
In the Kies the lines are:
PDA: MJ5
PHONE: MJ5
CSC: MJ5(BTU)
So what's the problem? Is it a problem with Kies software and I'll get OTA updates from Germany when they will be out? Or is something wrong with the sofware of the device?
Thanks in advance
Anyone???
Meyhemg said:
Hello everyone,
I installed last week the German stock rom for Galaxy S4 GT-I9505.
Here are the details:
AP: I9505XXUEMJ5
CP: I9505XXUEMJ5
CSC: I9505OXAEMJ5
When I try to connect it via Kies and check for newer firmware I get the message that my firmware is not supported to update via Kies.
The status of the device is Official and the Knox is 0x0.
In the Kies the lines are:
PDA: MJ5
PHONE: MJ5
CSC: MJ5(BTU)
So what's the problem? Is it a problem with Kies software and I'll get OTA updates from Germany when they will be out? Or is something wrong with the sofware of the device?
Thanks in advance
Click to expand...
Click to collapse
Maybe your Region is already at the current firmware, i'm from Holland and my final firmware i got is MJ5 too. Why do you want to upgrade it anyway?
BillvanHalen said:
Maybe your Region is already at the current firmware, i'm from Holland and my final firmware i got is MJ5 too. Why do you want to upgrade it anyway?
Click to expand...
Click to collapse
I just wanted to check if Kies supports upgrading my firmware because the previous firmware I had wasn't supported by Kies.
And it had been supported it would have written that there's no newer version but wouldn't have written that it doesn't support so it's not the issue.
Anyone??
Meyhemg said:
Anyone??
Click to expand...
Click to collapse
What if you try to update your phone with: "Software Update" ON your phone.
BillvanHalen said:
What if you try to update your phone with: "Software Update" ON your phone.
Click to expand...
Click to collapse
This is the MAIN thing I'm not sure about and I want to ask you about it:
If Kies does not allow me to update my firmware through it will it affect the OTA feature? I mean if Kies doesn't allow to update so OTA won't work also?
Meyhemg said:
This is the MAIN thing I'm not sure about and I want to ask you about it:
If Kies does not allow me to update my firmware through it will it affect the OTA feature? I mean if Kies doesn't allow to update so OTA won't work also?
Click to expand...
Click to collapse
Not sure about that, i don't know if OTA and Kies are Synced with eachother, have you tried to "Scan" for new updates with OTA on your phone?
BillvanHalen said:
Not sure about that, i don't know if OTA and Kies are Synced with eachother, have you tried to "Scan" for new updates with OTA on your phone?
Click to expand...
Click to collapse
I did try to scan with OTA so it does its scanning for few seconds and then says my device is up to date (I also don't expect any updates now because the latest one was released last month - android 4.3).
Will you recommend me flashing the XXUEMJ7 of BTU (as of Kies details, my device is originally from United Kingdom)?
Will it trigger the Knox flag?
Meyhemg said:
I did try to scan with OTA so it does its scanning for few seconds and then says my device is up to date (I also don't expect any updates now because the latest one was released last month - android 4.3).
Will you recommend me flashing the XXUEMJ7 of BTU (as of Kies details, my device is originally from United Kingdom)?
Will it trigger the Knox flag?
Click to expand...
Click to collapse
What if you try a Samsung Kies Firmware Upgrade and Initialization? It will bring your device to fully Stock TouchWiz Android 4.3.
Enter your Modelnumber (GT-I9505), pull out your battery you will see a S/N code, fill that in, reboot in Download mode and follow the Kies instructions.
WARNING: YOU WILL LOSE EVERYTHING SAVED ON YOUR PHONE STORAGE, INCLUDING MEDIA AND CONFIGURATIONS, SO BACKUP THEM.
You could give it a try.
---------- Post added at 01:09 PM ---------- Previous post was at 01:06 PM ----------
BillvanHalen said:
What if you try a Samsung Kies Firmware Upgrade and Initialization? It will bring your device to fully Stock TouchWiz Android 4.3.
Enter your Modelnumber (GT-I9505), pull out your battery you will see a S/N code, fill that in, reboot in Download mode and follow the Kies instructions.
WARNING: YOU WILL LOSE EVERYTHING SAVED ON YOUR PHONE STORAGE, INCLUDING MEDIA AND CONFIGURATIONS, SO BACKUP THEM.
You could give it a try.
Click to expand...
Click to collapse
Kies should regonize the phone because it's booted in Download Mode, it will load the regular MTP Android Drivers.
BillvanHalen said:
What if you try a Samsung Kies Firmware Upgrade and Initialization? It will bring your device to fully Stock TouchWiz Android 4.3.
Enter your Modelnumber (GT-I9505), pull out your battery you will see a S/N code, fill that in, reboot in Download mode and follow the Kies instructions.
WARNING: YOU WILL LOSE EVERYTHING SAVED ON YOUR PHONE STORAGE, INCLUDING MEDIA AND CONFIGURATIONS, SO BACKUP THEM.
You could give it a try.
---------- Post added at 01:09 PM ---------- Previous post was at 01:06 PM ----------
Kies should regonize the phone because it's booted in Download Mode, it will load the regular MTP Android Drivers.
Click to expand...
Click to collapse
I didn't get what you mean.
Where is this Samsung Kies Firmware Upgrade and Initialization?
And in case you didn't understand me, I have already full stock TouchWiz Android 4.3. The only problem is that I flashed via Odin the German stock rom and the CSC in Kies shows in brackets the product code of United Kingdom (BTU) instead of Germany (DBT).
Why did it happen? I flashed all by the rules and Kies didn't report any problems at the end of the process.

[Q] 4.3 to 4.4.2 update for grey market s4?

I'm using a Czech T-mobile S4 GT-I9505 which is currently running firmware 4.3 (baseband I9505XXUEMKF) and am unclear about whether I'll be able to get an official update to 4.4.2 via my Singapore carrier (Starhub) at any point. I can't go via Kies, it says the device doesn't support firmware initialization.
Any advice would be welcome, thanks very much in advance.
luke_osullivan said:
I'm using a Czech T-mobile S4 GT-I9505 which is currently running firmware 4.3 (baseband I9505XXUEMKF) and am unclear about whether I'll be able to get an official update to 4.4.2 via my Singapore carrier (Starhub) at any point. I can't go via Kies, it says the device doesn't support firmware initialization.
Any advice would be welcome, thanks very much in advance.
Click to expand...
Click to collapse
1. Android 4.3 and android 4.4.2 use KIES 3.
2. When u conect ur phone to Kies 3, you dont need press Tools -> Firmware Upgrade and Initialization. The update, if u have any, will pop up automatically (example in pic 1 attached).
3. If Kies 3 tell u that can't update is coz the old owner installed one firmware with wrong CSC.
- Go to Kies 3 and you will see ur CSC (its your zone code) like the pic 2 attached.
- Knowing ur CSC, take a look for this firmware in Sammobile.com
- Download and flash it with ODIN (Dont flash a "Black EDITION" if ur phone isnt it)
- Enjoy
Thanks for the reply.
Actually, this was a new phone, but it was purchased as a grey market import. I should have said that I have tried to go via Kies but it tells me I have the latest firmware. So does the phone OTA update.
Could it be that the OTA update is still connecting to the update server for Czech S4 phones and there hasn't been a 4.4.2 rollout there yet? If so, it looks like I have to root it if I want to go to 4.4.2.
luke_osullivan said:
Thanks for the reply.
Actually, this was a new phone, but it was purchased as a grey market import. I should have said that I have tried to go via Kies but it tells me I have the latest firmware. So does the phone OTA update.
Could it be that the OTA update is still connecting to the update server for Czech S4 phones and there hasn't been a 4.4.2 rollout there yet? If so, it looks like I have to root it if I want to go to 4.4.2.
Click to expand...
Click to collapse
Conect it to Kies 3 and attach screenshot pls :highfive:

Upgrading from Android 4.3 to 4.4.. How to?

Hi guys.
Wondered how i go about updating my galaxy s4 from Android 4.3 to Android 4.4?
Would it need rooting?
Thank you.
Just wanna add it is a Gi9505
MartK87 said:
Hi guys.
Wondered how i go about updating my galaxy s4 from Android 4.3 to Android 4.4?
Would it need rooting?
Thank you.
Just wanna add it is a Gi9505
Click to expand...
Click to collapse
Hi,
Are you talking about upgrade from stock 4.3 to stock 4.4.2? if so there is no need to root , just go to Sammobile.com find the rigght firmware and flash it ( Odin)
Thanks!
On SAM Mobile now.
How do i find out which country the phone belongs to along with knowing the correct firmware to get?
I should note i got the phone from Australia, however i cannot see Australia in the firmware list for GT-I9505.
Thanks
Just an update.
Not sure if its possible to flash to 4.4 because I've just been on SAMMobile.
Clicked on FIRMWARE
Then clicked Check Your Firmware.
Which i did. The phone is unlocked so i just chose vodafone.
Then it directs me to a 2013 update which is android 4.3.
So does that mean i can't get one for 4.4?
MartK87 said:
Thanks!
On SAM Mobile now.
How do i find out which country the phone belongs to along with knowing the correct firmware to get?
I should note i got the phone from Australia, however i cannot see Australia in the firmware list for GT-I9505.
Thanks
Just an update.
Not sure if its possible to flash to 4.4 because I've just been on SAMMobile.
Clicked on FIRMWARE
Then clicked Check Your Firmware.
Which i did. The phone is unlocked so i just chose vodafone.
Then it directs me to a 2013 update which is android 4.3.
So does that mean i can't get one for 4.4?
Click to expand...
Click to collapse
Hi mate ,
For Australia seems like the newest firmware is 4. 3 but you can flash a firmware from other " similar" countries like UK , check other countries that you may consider closer to yours
for example
BTU means unbranded
Model: GT-I9505
Model name: GALAXY S4 LTE
Country: United Kingdom
Version: Android 4.4.2
Changelist: 481100
Build date: Fri, 14 Feb 2014 03:15:30 +0000
Product Code: BTU
PDA: I9505XXUFNB9
CSC: I9505BTUFNE1
MODEM: I9505XXUFNB9
CSC: I9505BTUFNE1
Language is similar and if the modem gives you problems ( it should not) you can always flash ( odin) another the only thing you may lose would be maybe any specific carrier service that is on your current carrier rom you have in your phone and your CSC will be from UK ( in this case)
You can try installing Kies 3 Connecting your phone and see if it promotes an Update
Ok guys thank you.
So if i were to get the latest UK one. How likely is it my sim would still work in it?
I currently use vodafone in AU and uk also has vodafone. So would i be better off getting a vodafone uk firmware or just an unlocked one?
Cos the s4 is actually unlocked already.
If you could perhaps link me to the correct firmware id really appreciate it. I just really dont wanna screw this up.
Any info you require i can give you. I know for sure it is a GT-I9505 and that it was purchased unlocked in australia.
Thank you.
MartK87 said:
Ok guys thank you.
So if i were to get the latest UK one. How likely is it my sim would still work in it?
I currently use vodafone in AU and uk also has vodafone. So would i be better off getting a vodafone uk firmware or just an unlocked one?
Cos the s4 is actually unlocked already.
If you could perhaps link me to the correct firmware id really appreciate it. I just really dont wanna screw this up.
Any info you require i can give you. I know for sure it is a GT-I9505 and that it was purchased unlocked in australia.
Thank you.
Click to expand...
Click to collapse
Hi,
Sim will work ok
Your choice vodafone or unbranded should be fine ( unbranded is newer) , unbranded ( no carrier stuff on it) has nothing to do with network lock
http://www.sammobile.com/firmwares/3/?download=30963 (vodafone)
http://www.sammobile.com/firmwares/3/?download=31852 ( unbranded)
back up your app , data , contacts , pictures , music and use this app to make a backup of your EFS folder ( there is your imei info) just in case
https://play.google.com/store/apps/details?id=com.spocky.galaxsimunlock&hl=en
Thanks so much for that! Awesome.
And to update it with the uk firmware, do i just refer to this guide?
http://forum.xda-developers.com/showthread.php?t=2265477
MartK87 said:
Thanks so much for that! Awesome.
And to update it with the uk firmware, do i just refer to this guide?
http://forum.xda-developers.com/showthread.php?t=2265477
Click to expand...
Click to collapse
Boot to download mode
Connect it to your PC
Open Odin3.09
Extract the Firware from Sammy
Click AP and select the firmware.
Hit start
MartK87 said:
Thanks so much for that! Awesome.
And to update it with the uk firmware, do i just refer to this guide?
http://forum.xda-developers.com/showthread.php?t=2265477
Click to expand...
Click to collapse
hi
they basically say the same ...... there is only one way to flash stock , in your case you do not need to flash the PIT file
from sammobile:
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Ok thats everything i need thanks so much.
Just one last question.. Can this process be done using a mac or am i better off using an XP based machine?
Thanks guys
MartK87 said:
Ok thats everything i need thanks so much.
Just one last question.. Can this process be done using a mac or am i better off using an XP based machine?
Thanks guys
Click to expand...
Click to collapse
Hi ,
Odin is windows based , it should work in a XP machine as long as the samsung usb drivers are updated
Ok cool.
I will use an XP based machine.
Ok so i now have odin and i now have the 1.54GB firmware package.
I can do the update as per the instructions.
But you suggested getting the latest USB Drivers for my device...
How would I find these drivers?
Is it just a matter of having the latest Kies right??
Thank you.
MartK87 said:
Ok cool.
I will use an XP based machine.
Ok so i now have odin and i now have the 1.54GB firmware package.
I can do the update as per the instructions.
But you suggested getting the latest USB Drivers for my device...
How would I find these drivers?
Is it just a matter of having the latest Kies right??
Thank you.
Click to expand...
Click to collapse
Yes , if you have the latest Kies you are set , remember to close all Kies activity ( task manager)
Good luck
MartK87 said:
Ok cool.
I will use an XP based machine.
Ok so i now have odin and i now have the 1.54GB firmware package.
I can do the update as per the instructions.
But you suggested getting the latest USB Drivers for my device...
How would I find these drivers?
Is it just a matter of having the latest Kies right??
Thank you.
Click to expand...
Click to collapse
1. Install Kies 3, it will autimaticly update all Samsung Drivers to the latest version
2. Connect your phone to the PC
3. Shut down Kies 3 and unconnect your Smartphone from PC
4. Boot in Download Mode on Your Phone
5. Open Odin 3.09
6. Connect Phone to the PC
7. Select AP and than search the tar.md5 file
8. Hit Flash if the button turns blue
Thanks for the help.
Gonna do it tonight after work.
Is there anything on the phone i should enable/disable before doing this?
Such as debugging?
Thanks!
MartK87 said:
Thanks for the help.
Gonna do it tonight after work.
Is there anything on the phone i should enable/disable before doing this?
Such as debugging?
Thanks!
Click to expand...
Click to collapse
No there isn't, just be sure you install all samsung drivers, that your PC can connect to your phone

[Q] N9005 "No Service" need help to troubleshoot

Hey All,
I got a Note 3 N9005, which supposedly was purchased in UAE.
Currently trying to use it in India, but, the device always says "No Service", with a crossed circle instead of network signal icon on notification bar.
Phone is on 4.2.2 with UGNH1. Below are some observations:
- Phone does NOT ask for any PIN / Unlock Code.
- In Settings > Status.. irrespective of any SIM, or no SIM.. Mobile Network Type = Unknown, Service State= Out of service, Mobile Network State=Disconnected.
- Orig CSC code is displayed as XTC from Phone Info App
- Tried to select a different CSC from CSC Select app.. it changed the boot logo but, network status.. still crossed circle
- IMEI is proper as printed below the battery
- Still i tried ChainFire's RegionLockAway. But, as expected, the method is only for MI7 / MJ1 / MJ3 JB versions. Sadly mine has already crossed and has A2 bootloader. So, no change was observed with CF RegionLockAway. Reverted the cahnges.
- Tried to flash MJ1 / MJ3 binaries from sammobile. As expected the latest bootloader won't allow to downgrade.
- Flashed Omega, but for no luck. Still no service and crossed circle icon.
- Flashed latest CyanogenMod. Though there was no Crossed Circle icon, there was an icon of network signal with zero network.
- Flashed official Lollipop verson to see if any changes.. no luck. Reverted back.
- Installed advanced network info app, network status, neighboring MSC, cells.. etc was shown as none.
No clue how to enable the device's network capabilities (all else like WiFi and other feature work as usual).
It will be a great help if you can guide me through! Please let me know if any other info is required.
Thanks a lot in advance. !!
Purchased in UAE doesn't necessarily it was a UAE phone. Phone Info Samsung from Play Store can tell you where it is from.
What I would do is...
Download the firmware from Sammobile to suit your phone. One fairly common issue is that Hong Kong or Chinese phones get sold into Europe or other markets and their PIT and other partitions are different. So first thing is to go back to scratch.
If you phone IS from where you think, make sure you have the stock firmware for that location and flash the latest version using Odin and Download mode.
Start Odin - v3.09 is best.
To enter DL mode for anything to do with BL or Modem you MUST turn phone off. It is best to remove the battery and wait a while, then put it in and use the Power On+Vol-Down+Home key to get into DL mode, then [plug phone into PC and wait for Odin to notice it is there.
(if Odin doesn't notice it, get the latest Samsung USB drivers for the phone and install them with phone unplugged, then plug in phone and Windows should give a pop-up)
Click on AP in Odin and navigate to where you saved the firmware - note you DL'd a zip but you need the md5 file so use 7zip to unpack the zip.
Click on the md5 file and wait for it to load into Odin.
* [Auto Reboot] and [F.Reset Time] should be the ONLY things ticked.
Click [Start] and wait.
Let phone restart and set it up with your details. Once done see if you have network.
Journyman16 said:
Purchased in UAE doesn't necessarily it was a UAE phone. Phone Info Samsung from Play Store can tell you where it is from.
......
Let phone restart and set it up with your details. Once done see if you have network.
Click to expand...
Click to collapse
Thanks Journyman16 for the quickreply.
I installed the "Phone Info Samsung" app as you mentioned and found the phone's CSC code is XTC! (= Philippines (Open Line))!!
Thanks for the hint. I will download the latest firmware from sammobile for n98005 for XTC and check. Will be back with updates in some time.
maesiva said:
Thanks Journyman16 for the quickreply.
I installed the "Phone Info Samsung" app as you mentioned and found the phone's CSC code is XTC! (= Philippines (Open Line))!!
Thanks for the hint. I will download the latest firmware from sammobile for n98005 for XTC and check. Will be back with updates in some time.
Click to expand...
Click to collapse
Update:
Flashed below 3 stock firmwares from sammobile, each time cleared cache and factory wipe.. still the crossed circle is hopelessly adamant and persistent.
4.4.2 N9005XXUGNH1
4.4.2 N9005XXUGNI4
4.3 N9005XXUDMJ7 (failed to flash, i guess due to current bootloader version A3)
I tried with Odin 3.09.3 & 3.10.6 & 3.07 .... same result.
Any suggestions? please share.. I'm ok to soft brick the phone Recovered from boot loop few times
Any further suggestions? Please share.. Shall i give a try with full wipe (/system/ folder wipe) with TWRP ? Or any other thing ?!
Tried a different sim card ??
Checked APN settings .
Checked you have modem/ baseband via settings .
maesiva said:
Update:
Any suggestions? please share.. I'm ok to soft brick the phone Recovered from boot loop few times
Any further suggestions? Please share.. Shall i give a try with full wipe (/system/ folder wipe) with TWRP ? Or any other thing ?!
Click to expand...
Click to collapse
They are old stock ROMs - how sure are you the phone wasn't updated to the new version of BL? I'm not sure if you're on the new version and then try to downgrade it, which version you will see in Phone Info but check it. There's also a phone # code to use that returns the basics for the phone, but I can't recall if you said you get calls or not and I'm heading for bed. Think the code is something like *#12334#* - google for secret smartphone codes.
JJEgan said:
Tried a different sim card ??
Checked APN settings .
Checked you have modem/ baseband via settings .
Click to expand...
Click to collapse
Hi JJEgan, thanks for your suggestions..
I tried with different SIM, yet no luck.
APN settings.. shows my SIM operator's default settings.
When I search networks Manually.. it searches for a ~10 seconds and returns without any list/error.
Select automatically shows "Automatic registration.." progress continuously for > 5 mins.. i closed manually.
Attached screenshot of Baseband, Modem, CSC versions.
AP: UGNH1
CP: UGNH1
CSC: BGNH1
Baseband: UGNH1
Kernel: 3.4.0-1955971
Journyman16 said:
They are old stock ROMs - how sure are you the phone wasn't updated to the new version of BL? I'm not sure if you're on the new version and then try to downgrade it, which version you will see in Phone Info but check it. There's also a phone # code to use that returns the basics for the phone, but I can't recall if you said you get calls or not and I'm heading for bed. Think the code is something like *#12334#* - google for secret smartphone codes.
Click to expand...
Click to collapse
Yea Journyman16, they seem to be still good old of 4.4.2. Latest must be 5.0. On samobile, for XTC i could see only till 4.4.2. Maybe for this phone version, there are no updates? Not sure.
And, yes, sadly BL is updated to A3. Which I could see in Recovery mode's REV line. (if it was A1, I could have flashed MI7 and tried RegionLockAway.. )
*#1234# gives the below info:
AP: UGNH1
CP: UGNH1
CSC: BGNH1
Any heads up ?!
/system/csc/GLB/system/csc/customer.xml has a line:
<NbNetworkLock>1</NbNetworkLock>
Which ChainFire's RegionLockAway changes to
<NbNetworkLock>0</NbNetworkLock>.. but as mentioned in it's details, the method is compatible only with MI7, MJ1, MJ3 firmwares and i'm on UGNH1 and unable to downgrade
Chainfire said:
Sammy, in their never-ending quest to make sure they've pissed off every single one of their customers at least once, have decided to region lock their latest model devices.
...
Compatible devices
- Galaxy Note 3 SM-N9005 (MI7, MJ1, MJ3 firmwares)
...
Click to expand...
Click to collapse
Any method to downgrade the BL to A1 would help !?
Attached adb logs, if of any use to analyze.
aeroplaemodeoffon.log
boot.log
networksearch.log
shutdown.log
maesiva said:
Attached adb logs, if of any use to analyze.
aeroplaemodeoffon.log
boot.log
networksearch.log
shutdown.log
Click to expand...
Click to collapse
I'd upgrade rather than try to get around the downgrade issues. What Region do you WANT to have? European ones seem to get early release of upgrades - e.g. many LP ROMs are based around the Polish release.
I don't know enough to interpret logs, but my thought would be to find a non-Philippines version (one of the Europe ones perhaps) and find a PIT file for that one. Then go read up on how to safely flash a new PIT. Then flash your preferred firmware and follow the root process etc.
I started with a HK version of S3 - every time I tried to flash a new ROM it failed and bricked my phone. Eventually I found that the PIT file on most Asian phones was different and I flashed PIT, then stock FW for the region I wanted then re-rooted and flashed the custom ROM.
Read many time, flash once, OK? I do not make bricks, nor need them, so I will not accept them delivered to my door...
Journyman16 said:
Read many time, flash once, OK? I do not make bricks, nor need them, so I will not accept them delivered to my door...
Click to expand...
Click to collapse
good one
maesiva said:
good one
Click to expand...
Click to collapse
There's a Euro PIT on the link at This Post - I checked and the dropbox is still valid. It's 4.4.2 so could be just what you need.
Now you probably want an India ROM but I haven't any links for that 0 there's a thread for India users though I think.
What I think might be happening is that different countries use different frequencies and formats for signal. It might be that India's set up simply doesn't work with the modem you've been using and the India ROM will not set up with the Asian PIT set up etc.
But read up on the process first, OK? The more you know about it the better chance you have to recover from anything going wrong.
Also, I presume from your OP that the phone NEVER worked once you got it? Do you know for a fact it worked prior to that? Maybe you're chasing solutions for a faulty hardware issue?
Journyman16 said:
There's a Euro PIT on the link at This Post - I checked and the dropbox is still valid. It's 4.4.2 so could be just what you need.
....
Also, I presume from your OP that the phone NEVER worked once you got it? Do you know for a fact it worked prior to that? Maybe you're chasing solutions for a faulty hardware issue?
Click to expand...
Click to collapse
Hi Journyman16, thanks for the suggestions.. i tried the pit file you referred, but, still no luck. And, if i'm not wrong pit file is all about allocating ROM space for /system & /dbdata and has nothing to deal with the antenna/telephony module, please correct if i'm not right.
About the phone's status yea you're right. It never worked after i received it. But, it was working usually in UAE, as per the info i got. Maybe.. as you suspected.. it might be faulty hardware too.. I don't know.. just exploring the options.. to conclude something..
maesiva said:
And, yes, sadly BL is updated to A3. Which I could see in Recovery mode's REV line. (if it was A1, I could have flashed MI7 and tried RegionLockAway.. )
*#1234# gives the below info:
AP: UGNH1
CP: UGNH1
CSC: BGNH1
Any heads up ?!
Click to expand...
Click to collapse
The only unbranded NH1's seem to be Greece or Netherlands. Netherlands has a 5.0 - maybe DL that and flash in Odin? Greece has a v5.0 but it's branded with (EUR) so I don't know if that's a company or general... I'd go the Netherlands one.
Other than that, I'm not sure - might be time to get the phone checked properly?
Finally.. could trace the root cause.. antenna / receiver chip malfunction. So, it was an hardware issue that had to be replaced at a cost at service center.
Summary: If network icon is crossed circle, its not a good sign !! Thanks
Journyman16 said:
Journyman16
Click to expand...
Click to collapse
,
JJEgan said:
JJEgan
Click to expand...
Click to collapse
!!
I need your help. I have a problem after flashing lollipop firmware on samsung galaxy note 3, sm-n900s the signal or the device has no service. Any modem use to flash?
Please, I need your help xda devs as soon as possible. Really appreciated. Thank you.
Naedean said:
I need your help. I have a problem after flashing lollipop firmware on samsung galaxy note 3, sm-n900s the signal or the device has no service. Any modem use to flash?
Please, I need your help xda devs as soon as possible. Really appreciated. Thank you.
Click to expand...
Click to collapse
Please search and read before posting.Multiple identical questions posted day after day .
Usual is wrong IMEI .
Sent from my SM-N930F using XDA-Developers Legacy app

Categories

Resources