I have installed swift droid on my GT540 and tommorow i wanted to change the the system to 4.0 by Mike Gapinski. Before flashing mike gapinski's rom i tried to install the original android and id failed. Now after LG logo there's a linux kernel panic
Process init (pid: 1). I've tried flashing with kdz updater on EMERGENCY and CS_EMERGENCY with that V20_a French rom but the log got stuck at wParam=205 lParam=215 and after it the phones reboot and kdz doesnt do anything more.
Please help me!
Generalil said:
I have installed swift droid on my GT540 and tommorow i wanted to change the the system to 4.0 by Mike Gapinski. Before flashing mike gapinski's rom i tried to install the original android and id failed. Now after LG logo there's a linux kernel panic
Process init (pid: 1). I've tried flashing with kdz updater on EMERGENCY and CS_EMERGENCY with that V20_a French rom but the log got stuck at wParam=205 lParam=215 and after it the phones reboot and kdz doesnt do anything more.
Please help me!
Click to expand...
Click to collapse
are u able to enter recovery / fastboot mode?
Download mode only
Use kdz updater to flash a 2.1 rom that has fastboot enabled. Use cs_emergency mode (phone in download mode).
When it finishes (or just stops) pull the battery then put it back in and go straight to fastboot.
Connect to pc and do:
fastboot erase boot
fastboot erase system
fastboot erase cache
Then flash recovery back on. Then use recovery or fastboot to flash whatever rom you want...
Sent from my LG GT540 Swift
Generalil said:
I have installed swift droid on my GT540 and tommorow i wanted to change the the system to 4.0 by Mike Gapinski. Before flashing mike gapinski's rom i tried to install the original android and id failed. Now after LG logo there's a linux kernel panic
Process init (pid: 1). I've tried flashing with kdz updater on EMERGENCY and CS_EMERGENCY with that V20_a French rom but the log got stuck at wParam=205 lParam=215 and after it the phones reboot and kdz doesnt do anything more.
Please help me!
Click to expand...
Click to collapse
Hi my friend, i've experimented this problems months ago, when i started with my phone..
This is the only solution i found, risking:
Follow the same process, and when the log got stuck at wParam=205 lParam=215, disconnect the phone, wait 2 seconds, and reconnect in download mode, the process in kdz will continue until the end..
We hope your results
When i bricked my phone too the process in KDZ used to freeze at the same point as yours...just be a little more patient and the process will proceed and everything will be ok..KDZ is a very useful tool at times like it..
Stuck
After flashing to European ROM-fastboot its stuck at android logo. Any other roms causes nothing to happen.
Help
Anyone knows what to do? I dont have warranty.
One of my friend had the same problem (stuck at android logo), I don't remember exactly how we fixed it, but we fixed it by trying everything written on XDA.
IIRC we tried a lot of ROMs in normal and both emergency. Don't forget to close programs that could interfere with the flashing process (anti-virus and such)
My post isn't useful but it's to let you know that there's still a way to fix it.
Does he remember what was the topic?
Generalil said:
After flashing to European ROM-fastboot its stuck at android logo. Any other roms causes nothing to happen.
Click to expand...
Click to collapse
After flashing European rom from kdz, you must enter in fastboot mode and flash whatever personalized rom you want.. swiftdroid asis, utopia, ics beta 4..
To enter in fastboot mode turn off your phone and then press camera button + power..
Thanks
Thanks ! It worked !
Thank you all!
followed instructions but stuck now
I have goofed up big time in trying to roll back Android 2.3.7 Gingerbread (Swiftdroid) CM 7.1 to stock. I used KDZ updater and got up to "Smart : wParam = 205, lParam = 215". Then the it stops and the phone tries to reboot and is no longer recognized by windows vista. The phone scree shows:
[Blue Error Handler] Arm11 is Crashed !!
[Press Volume up key] Reboot&savelog
[Press Volume down
--------------------------------------------------------------------
Linux Kernel Panic
Process init(pid: 1)
--------------------------------------------------------------------
There are multiple lines after that which fill rest of the screen. I guess I can take a photo and post it if required.
I followed the above advice, put the phone in Download mode and left KDZ to finish. then I got this log:
21:51:54 : Smart : wParam = 205, lParam = 212
21:58:35 : Smart : wParam = 12, lParam = 0
21:58:37 : Step Complete : UPDATE FINISHED!
21:58:37 : ResetStartInfo() Call
21:58:37 : _DetachDLL Call
21:58:37 : _DetachDLL Call End
21:58:37 : FreeLibrary Call
21:58:37 : FreeLibrary Call End
21:58:37 : ResetStartInfo() Call End
21:58:37 : OnModelDllMsg(OnMsgFromModelDll3GQCT_PDA) delete m_pLGCyonUpdate
21:58:37 : ===FINISHED===
However the phone on rebooting is still showing the same -
[Blue Error Handler] Arm11 is Crashed !!
[Press Volume up key] Reboot&savelog
[Press Volume down
--------------------------------------------------------------------
Linux Kernel Panic
Process init(pid: 1)
--------------------------------------------------------------------
What to do ?
---------- Post added at 10:57 PM ---------- Previous post was at 10:07 PM ----------
OK. I used KDZ to flash romfastboot, then reinstalled Android 2.3.7 Gingerbread (Swiftdroid) CM 7.1 and all is well again.
Maybe (just maybe) you're flashing a wrong image...GT540 is ARM6 based not ARM11 as the message says.
revertm said:
Maybe (just maybe) you're flashing a wrong image...GT540 is ARM6 based not ARM11 as the message says.
Click to expand...
Click to collapse
arm V6 = arm 11
I am having this exact same problem, but the solution wasn't clearly written in this thread....
Whichever rom I try and flash using KDZ, they all get stuck at the android boot logo when trying to turn the phone on.
But so what exactly is the solution please??
Mate it's a 3 year old thread, but I might just have the solution somewhere just give me til tomorrow.
Sent from my Nexus 5 using Tapatalk
Generalil said:
Mate it's a 3 year old thread, but I might just have the solution somewhere just give me til tomorrow.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Cheers thankyou.
This has literally ruined my entire life currently, as having my phone broken has made me lose so much stuff in my job and everything.
Ive looked all over this forum and others but everyone just keeps saying the same rubbish about ''flashing using kdz'',
but that simply doesn't work, and the kdz tool is just a piece of crap in my view!!
But so if you know the actual solution il appreciate it so much
What KDZ images did you try to flash? (BTW KDZ is the only way out of this situation). What exactly does your screen say while booting?
In my case, from what I remember, I either tried flashing one of the multiple images published in this forum and it just clicked, or i may have tried unplugging the phone while flashing with KDZ just to see if breaking it further may undo the damage done before, but that is the last resolve.
When you post additional info and whether you want/can try some possibly bricking techniques I can help you more.
Till then mate.
Generalil said:
What KDZ images did you try to flash? (BTW KDZ is the only way out of this situation). What exactly does your screen say while booting?
In my case, from what I remember, I either tried flashing one of the multiple images published in this forum and it just clicked, or i may have tried unplugging the phone while flashing with KDZ just to see if breaking it further may undo the damage done before, but that is the last resolve.
When you post additional info and whether you want/can try some possibly bricking techniques I can help you more.
Till then mate.
Click to expand...
Click to collapse
I managed to unbrick it yesterday.
I used KDZ, cs-emergency, it was saying phone not found but using a trick from a page on facebook I removed the battery and reconnected the usb (it showed a screen saying it needed battery), but KDZ detected phone and it flashed 2.1 (update 1) which I think was a stock rom.
I then managed to get it back to 4.2.1 rom by using fastboot to flash 2.3.3 rom,
then using fastboot again to flash 2.3.7 rom,
and then using recovery to install 4.2.1 rom from zip.
Im still having the exact same problem with the phone as before though,
as when I try and use Mounts2sd, the phone just screwsup totally.
Its because it always says ''error mounting sd-ext''.
I cannot use the phone without mounts2sd though, since there isn't enough memory for even 1 app without it! :'(
But re-partitioning sd cards just destroys them.
I had to go and buy yet another sd card today as the other 2 had been ruined totally by the phone!!
I tried to re-flash the 2.1 rom via fastboot and also tried through recovery.
When trying through fastboot and KDZ the phone wont get detected by KDZ (removing the battery now doesn't make any difference like it did yesterday as it wont do that same screen it did yesterday),
and when I tried to flash a 2.1 rom I found via recovery it just showed a screen saying loads of errors and that my rom couldn't allow that, and then the phone wouldn't turn on just kept getting stuck at the cyanogen logo.
So I had to go and buy a brand new sd card, put it into my computer, put the 4.2.1 rom onto it, start phone in recovery which it could still get to luckily, and then install that rom again.
But so now I have a phone that is on 4.2.1 rom, will turn on ok, but cos there is an issue with the SD-ext mounting,
I cannot install mounts2sd, and so cannot use the phone!! :'( :'(
Guys help me out pls.. Ive tried to get my phone to the latest firmware with the suport tool.. and got stuck.. again in emergency mode.. the hard reset aint working.. recovery aint working with any of the solutions found here.. i keep getting the disconected cell message and wparam eroor... i dont have any other option.. i did got the phone to service for a week and theyy couldent do it.. i had this problem once more time but resolved it.. i have to say my pc i windows 7 .. nothing is working.. pls help
AlinushTM said:
Guys help me out pls.. Ive tried to get my phone to the latest firmware with the suport tool.. and got stuck.. again in emergency mode.. the hard reset aint working.. recovery aint working with any of the solutions found here.. i keep getting the disconected cell message and wparam eroor... i dont have any other option.. i did got the phone to service for a week and theyy couldent do it.. i had this problem once more time but resolved it.. i have to say my pc i windows 7 .. nothing is working.. pls help
Click to expand...
Click to collapse
try it in another PC or
Uninstall everything related to LG and restart the pc
and reinstall everything from LG usually works
please my phone not working for 2 months the proplem is after flash stock rom by kdz phone restart and show lg logo and white screen and restart
this happens with any version availble .....and i cant enter to cwm ...i tried hard reset and change windos..xp.win7 .64 ..same proplem and computer can not read phone information ...and tried to reinstal msxml ....same proplem please i want to work my phone back ....and i tried the 43 page solve and same error becase phone can not enter to cwm .....please if any one know any solve for my proplem ..help.. and i tried befor flash by kzd to disabe modem and same error happens after flash ....
this error show to me.....
abdelnaby85 said:
please my phone not working for 2 months the proplem is after flash stock rom by kdz phone restart and show lg logo and white screen and restart
this happens with any version availble .....and i cant enter to cwm ...i tried hard reset and change windos..xp.win7 .64 ..same proplem and computer can not read phone information ...and tried to reinstal msxml ....same proplem please i want to work my phone back ....and i tried the 43 page solve and same error becase phone can not enter to cwm .....please if any one know any solve for my proplem ..help.. and i tried befor flash by kzd to disabe modem and same error happens after flash ....
this error show to me.....
Click to expand...
Click to collapse
try it on another pc.
or uninstall all lg of your pc then reboot again and reinstall everything again
Have you tried flashing in KDZ with battery removed?
Sent from my LG-P700
lokopol said:
try it on another pc.
or uninstall all lg of your pc then reboot again and reinstall everything again
Click to expand...
Click to collapse
i tried this on 4 another pc ...same error
Hard reseting its when u come back to stock.
How cant u recover it ?
Enter diag mode then select it trought KDZ program-> diag mode
Then start upgrade in program .
Ur phone will turn in emergency mode AUTOMATICALLY so phone recovered
Sent From ... Lg e400 <-- {[Brasilian Here]}
hi, im new here and i need help i've got a problem on my lg optimus l3. I think my phone was bricked. i can no longer access recovery mode but i still can go to emergency mode. then i tried to use kdz and it try to bring it back to the old l3 which is ginger bread.. oh by the way im using cm9 and sdmerge that time when suddenly my phone restarted and open then restart again.. non stop restarting.. so i decided to format it.. but when i reformat it my memory became 15mb only..
thats the time i tried to use kdz.. but when i used kdz to flash the old firmware im getting an error.. that was the time i can no longer acess my recovery mode. and also when im in emergency mode my pc is not recognizing my phone.. ive redownload and reinstall all the drivers but still no luck..
now i cant open my phone.. it always stuck in lg logo and go to white screen and back to lg logo again..
please someone help me..:crying::crying:
LGE400Addict said:
hi, im new here and i need help i've got a problem on my lg optimus l3. I think my phone was bricked. i can no longer access recovery mode but i still can go to emergency mode. then i tried to use kdz and it try to bring it back to the old l3 which is ginger bread.. oh by the way im using cm9 and sdmerge that time when suddenly my phone restarted and open then restart again.. non stop restarting.. so i decided to format it.. but when i reformat it my memory became 15mb only..
thats the time i tried to use kdz.. but when i used kdz to flash the old firmware im getting an error.. that was the time i can no longer acess my recovery mode. and also when im in emergency mode my pc is not recognizing my phone.. ive redownload and reinstall all the drivers but still no luck..
now i cant open my phone.. it always stuck in lg logo and go to white screen and back to lg logo again..
please someone help me..:crying::crying:
Click to expand...
Click to collapse
does your phone come-up with blank (black but backlit) screen ?
if it does then you will be able to use kdz updater in attached link LG-RDTT_1.0.5.4 (needs included windows enabler for this version)
use THIS GUIDE to flash just skip the hosts file editing steps
and let us know
LG-RDTT_1.0.5.4
IGGYVIP said:
does your phone come-up with blank (black but backlit) screen ?
if it does then you will be able to use kdz updater in attached link LG-RDTT_1.0.5.4 (needs included windows enabler for this version)
use THIS GUIDE to flash just skip the hosts file editing steps
and let us know
dl.xda-developers.com/attachdl/8c343b1d694e531790a4bedc4a0d3dc3/530e4e21/2/5/9/9/9/3/9/LG-RDTT_1.0.5.4.zip
Click to expand...
Click to collapse
ok i will try thanks.. i will let you know immediately. where can i get that LG-RDTT something?
sorry for the bad english
LGE400Addict said:
ok i will try thanks.. i will let you know immediately. where can i get that LG-RDTT something?
sorry for the bad english
Click to expand...
Click to collapse
my computer doesnt recognizing my phone when in emergency mode..
i dont know what to do in the files ive downloaded.. i followed all the instruction..
can you give me pictures or videos...
my phone is not booting and its going white screen and back to lg logo again..
when i try to use VOLUME - plus home and POwer button.. its stuck in lg logo..
when i connect it in pc in that situation the computer reconize my phone but with some failed installing deivce..
i know im doing something wrong but i cant figure it out.. coz im not an expert..
im losing hope that i can bring back my long time lge400 friend..
Hi,i really need help. My phone was working fine a few days back when i entered the recovery mode in f320L and deleted the system files. After that i saw the flash method and accidentally installed d802 firmware in my lg,not properly though,when the flashing was done on my phone,on my laptop it said "upgrade failed" while my phone was flashed. And now its touch is all messed up and restarts after every 5 seconds. It goes into download mode but not in recovery mode. I tried flashing the proper f320L files but its not working,it says "phone disconnected from PC" at 2%. My phone has been idle and useless for days. I would really appreciate some help. And since I'm from Pakistan i tried paying some geeks to fix it but they couldnt either.
mustfafafakhar said:
Hi,i really need help. My phone was working fine a few days back when i entered the recovery mode in f320L and deleted the system files. After that i saw the flash method and accidentally installed d802 firmware in my lg,not properly though,when the flashing was done on my phone,on my laptop it said "upgrade failed" while my phone was flashed. And now its touch is all messed up and restarts after every 5 seconds. It goes into download mode but not in recovery mode. I tried flashing the proper f320L files but its not working,it says "phone disconnected from PC" at 2%. My phone has been idle and useless for days. I would really appreciate some help. And since I'm from Pakistan i tried paying some geeks to fix it but they couldnt either.
Click to expand...
Click to collapse
Read this topic http://forum.xda-developers.com/lg-g2/development-d802/fix-lg-flash-tool-stuck-2-t3031112
P.p This si only D802. Sorry.