Related
Hi,
I just flashed the Zierex Rom. Everything works fine, except wifi and Bluetooth, they are not turning on. Is there any way to fix this? Please help!
Marcus
marcusflint said:
Hi,
I just flashed the Zierex Rom. Everything works fine, except wifi and Bluetooth, they are not turning on. Is there any way to fix this? Please help!
Marcus
Click to expand...
Click to collapse
Its a kernel problem.Try changing your kernel.
Thanks for your reply.. but if i change the kernal from percy cm#2 to white RC3 or Repencis, my phone is not booting up, it get stuck at the galaxy y logo.
if it is a stock based rom and you are on a ext4 partition from using percys kernel then switch to hells fusion #50 else flash stock rom via odin before flashing a stock based rom after using a cm7 rom
you cant use percys cm #2 on a stock based rom
marcussmith2626 said:
if it is a stock based rom and you are on a ext4 partition from using percys kernel then switch to hells fusion #50 else flash stock rom via odin before flashing a stock based rom after using a cm7 rom
you cant use percys cm #2 on a stock based rom
Click to expand...
Click to collapse
Thanks a lot, that fixed the problem :good: :victory:
hello everyone
i want to know that can i use hells fusion #50 kernel with purekat rom
or i need to use percy and blackheart only
i am gonna flash this rom as soon as i get to know this................
kernel
abhishekr700 said:
hello everyone
i want to know that can i use hells fusion #50 kernel with purekat rom
or i need to use percy and blackheart only
i am gonna flash this rom as soon as i get to know this................
Click to expand...
Click to collapse
purekat is build on base as AOSP..... so u will need to flash percy or black reactor since hell's fusion supports stock base roms:laugh:
abhishekr700 said:
hello everyone
i want to know that can i use hells fusion #50 kernel with purekat rom
or i need to use percy and blackheart only
i am gonna flash this rom as soon as i get to know this................
Click to expand...
Click to collapse
not sure about purekat. I tried hells fusion on reincarnation (cm7). .device boots... but wifi & bluetooth won't work ... guess it's same for purekat
hells fusion #50 can boot cm7/aosp but it does not have the correct moduals for wifi/bluetooth for use on cm7/aosp therefore if you want a fully operational phone you need to use a kernel built for cm7/aosp like percys or black reactor
better to use cm kernel !!
Boot loop
NOPE ..... You can try Percy kernal but Hells fusion will Cause Boot loop
Sanjuujosephh said:
NOPE ..... You can try Percy kernal but Hells fusion will Cause Boot loop
Click to expand...
Click to collapse
hells fusion will not cause a boot loop - hells fusion can boot cm and aosp based roms but does not contain the moduals needed for wifi and bluetooth to work (it contains moduals for use on stock based only) hense why you need a cm/aosp kernel for full phone functions
I prefer u use BlackReactor . i have use it once .
[iPhone 6] or [Samsung Galaxy S5]
>>SG Y - Hyperion 8 Rom<<
>>SG S3 mini - Official Stock Rom<<
I think wifi and bluetooth dont work because oF drivers
Anyway tell me the correct procedure for flashing blackreactor kernel along with links
And yes if I just want to feel the rom not using wifi and bluetooth then can I flash rom on hells kernel
abhishekr700 said:
I think wifi and bluetooth dont work because oF drivers
Anyway tell me the correct procedure for flashing blackreactor kernel along with links
And yes if I just want to feel the rom not using wifi and bluetooth then can I flash rom on hells kernel
Click to expand...
Click to collapse
like iv explained many times in this thread you cannot use hells fusion as it does not contain the wifi and bluetooth modual for use on cm7/aosp - that kernel is for stock roms only
hells fusion will boot it but you may find things start force closing on you and not work properly with not all phone functions working
you MUST use percys kernel or black reactor kernel if you are using cm7/aosp to get full phone functions - network wifi bluetooth etc
all kernels are in the dev section - a simple search and you will find it - in fact black reactor kernel is currently on page one of the dev thread so not really much searching required
and you just flash it in cwm with system mounted then reboot to recovery and format system data cache then mount system data cache then flash your rom zip
Go for Black Heart
marcussmith2626 said:
like iv explained many times in this thread you cannot use hells fusion as it does not contain the wifi and bluetooth modual for use on cm7/aosp - that kernel is for stock roms only
hells fusion will boot it but you may find things start force closing on you and not work properly with not all phone functions working
you MUST use percys kernel or black reactor kernel if you are using cm7/aosp to get full phone functions - network wifi bluetooth etc
all kernels are in the dev section - a simple search and you will find it - in fact black reactor kernel is currently on page one of the dev thread so not really much searching required
and you just flash it in cwm with system mounted then reboot to recovery and format system data cache then mount system data cache then flash your rom zip
Click to expand...
Click to collapse
flashed blackreactor kernel through odin and phone does not boot past kernel logo even after 20 min
gonna try through cwm recovery....will update soon
and one more thing is v5 of blackreactor kerneel stable??
abhishekr700 said:
flashed blackreactor kernel through odin and phone does not boot past kernel logo even after 20 min
gonna try through cwm recovery....will update soon
and one more thing is v5 of blackreactor kerneel stable??
Click to expand...
Click to collapse
why are you using v5 of the kernel for cm/aosp rom?
please read the thread fully!!
v5 is for stock rom (doesnt work on all basebands so use v4)
cm is for cm roms and aosp
if you are using cm7 or an aosp rom you MUST use a cm kernel!!!
marcussmith2626 said:
why are you using v5 of the kernel for cm/aosp rom?
please read the thread fully!!
v5 is for stock rom (doesnt work on all basebands so use v4)
cm is for cm roms and aosp
if you are using cm7 or an aosp rom you MUST use a cm kernel!!!
Click to expand...
Click to collapse
so i can only use cm kernel not even v4 ?
abhishekr700 said:
so i can only use cm kernel not even v4 ?
Click to expand...
Click to collapse
I will say it one last time
if you are using cm7/aosp you MUST use a kernel built for cm7/aosp
that means you cannot use a kernel built for stock (they use different mount systems hense non booting)
To make it clearer - no you cannot use v5 or v4 of black reactor kernel on cm/aosp as they are stock kernels
You MUST use the cm version of black reactor!
marcussmith2626 said:
I will say it one last time
if you are using cm7/aosp you MUST use a kernel built for cm7/aosp
that means you cannot use a kernel built for stock (they use different mount systems hense non booting)
To make it clearer - no you cannot use v5 or v4 of black reactor kernel on cm/aosp as they are stock kernels
You MUST use the cm version of black reactor!
Click to expand...
Click to collapse
Lull, thats frustrating enough...
however,
Read the op carefully guys,
ops are written very carefully.
so,
CM version == ONLY AND ONLY CM/AOSP roms.
v5 and v4 == Only for stock based roms... (However, they can booth both aosp and cm7, but ur wifi or bluetooth wont work,) pick ur poison
AH..FINALLY
Ok
i got my answer
mods please close this thread
i have a custom purekat1.0 rom ,but when i try flash blackreactor kernel it stuck at logo.i try to revert back by hell fusion but it show many error like E:can't mount/system .plz anyone help me.i really don't know wht to do now
wanyakuza said:
i have a custom purekat1.0 rom ,but when i try flash blackreactor kernel it stuck at logo.i try to revert back by hell fusion but it show many error like E:can't mount/system .plz anyone help me.i really don't know wht to do now
Click to expand...
Click to collapse
i think purekat is aosp based rom .and for that u need to use the cm version of blackreactor kernel...hope it helps
abhishekr700 said:
i think purekat is aosp based rom .and for that u need to use the cm version of blackreactor kernel...hope it helps
Click to expand...
Click to collapse
i have flash blackreactor kernel but it stuck at logo ,now i try revert back to stock but it does not work.plz help me
wanyakuza said:
i have flash blackreactor kernel but it stuck at logo ,now i try revert back to stock but it does not work.plz help me
Click to expand...
Click to collapse
read again did u flash the cm version of kernel??
abhishekr700 said:
read again did u flash the cm version of kernel??
Click to expand...
Click to collapse
the black reactor kernel based on purekat1.0
first tell me whether u used the purekat based on aosp or based on stock.this information can be found in the thread from where u downloaded the purekat rom.then there are 2 types of kernel==
1.for stock based rom-->this kernel can boot stock based roms.like hells fusion
2.cm/aosp->this kernel can boot cyanogenmoad or aosp based rom.
download the required version of the kernel and flash it.
thats all
press thanks if i helped
abhishekr700 said:
first tell me whether u used the purekat based on aosp or based on stock.this information can be found in the thread from where u downloaded the purekat rom.then there are 2 types of kernel==
1.for stock based rom-->this kernel can boot stock based roms.like hells fusion
2.cm/aosp->this kernel can boot cyanogenmoad or aosp based rom.
download the required version of the kernel and flash it.
thats all
press thanks if i helped
Click to expand...
Click to collapse
I use purekat base stock n before I flash it I was on stock kernel.I want to update to purekat1.5 n I read the thread that must flash black reactor or Percy kernel first.so I flash the black reactor n I get stuck on boot.I don't know what the problem.when try revert back to stock it still show black reactor kernel on boot.plz help me,BTW just now I try wipe data n cache then reboot but still not work
plz guy help me
plz anyone know how to revert to stock kernel ,I have try hell fusion but it does not work.I don't have PC at home.
wanyakuza said:
plz anyone know how to revert to stock kernel ,I have try hell fusion but it does not work.I don't have PC at home.
Click to expand...
Click to collapse
if you flash hells fusion kernel it has the option to flash stock kernel
however if you have flashed black reactor cm and formatted system data cache you will now be on an ext system partition which stock kernel does not support so your phone will not boot
you will need to either use a rom and kernel that supports ext system partions like cm7 or flash stock rom via odin to convert back to rfs
if you are still on rfs you can use any stock based rom/kernel
First make sure which rom have you installed.
PureKat (AOSP)
Purekat Extreme (Stock)
Flash stock based kernels for stock based roms and cm based kernels for aosp or cm based roms.
I have try wipe data n cache ,I can mount data n SD card but not on mount system.I try format system it show skipping n done.now I don't what can I do bcoz I don't have PC at home,so guy can anyone help me to go stock kernel without use Odin.BTW I have try restore system but it give error
san122 said:
First make sure which rom have you installed.
PureKat (AOSP)
Purekat Extreme (Stock)
Click to expand...
Click to collapse
purekat1.0 , I have wrong step bcoz I thought if want go for update must flash black reactor or Percy.now get stuck on boot.plz help me
marcussmith2626 said:
if you flash hells fusion kernel it has the option to flash stock kernel
however if you have flashed black reactor cm and formatted system data cache you will now be on an ext system partition which stock kernel does not support so your phone will not boot
you will need to either use a rom and kernel that supports ext system partions like cm7 or flash stock rom via odin to convert back to rfs
if you are still on rfs you can use any stock based rom/kernel
Click to expand...
Click to collapse
what is rfs?BTW in hell fusion it has ext format right?I always get error when try mount system.
wanyakuza said:
what is rfs?BTW in hell fusion it has ext format right?I always get error when try mount system.
Click to expand...
Click to collapse
rfs - recursive file system
Hells fusion supports ext4 partitions....
Sent from my Xperia E1 dual using Tapatalk
1. Love doesn't need any reason.
2. Wanna speed up 3G (not 4G LTE)?
Here it is:
http://forum.xda-developers.com/showthread.php?t=2586876
3. My blog
4. Press the thanks button if I really helped/assisted you.
---------- Post added at 06:33 PM ---------- Previous post was at 06:32 PM ----------
wanyakuza said:
purekat1.0 , I have wrong step bcoz I thought if want go for update must flash black reactor or Percy.now get stuck on boot.plz help me
Click to expand...
Click to collapse
Did you flash CM-only kernels?
Sent from my Xperia E1 dual using Tapatalk
1. Love doesn't need any reason.
2. Wanna speed up 3G (not 4G LTE)?
Here it is:
http://forum.xda-developers.com/showthread.php?t=2586876
3. My blog
4. Press the thanks button if I really helped/assisted you.
luqman98 said:
rfs - recursive file system
Hells fusion supports ext4 partitions....
Sent from my Xperia E1 dual using Tapatalk
1. Love doesn't need any reason.
2. Wanna speed up 3G (not 4G LTE)?
Here it is:
http://forum.xda-developers.com/showthread.php?t=2586876
3. My blog
4. Press the thanks button if I really helped/assisted you.
---------- Post added at 06:33 PM ---------- Previous post was at 06:32 PM ----------
Did you flash CM-only kernels?
Sent from my Xperia E1 dual using Tapatalk
1. Love doesn't need any reason.
2. Wanna speed up 3G (not 4G LTE)?
Here it is:
http://forum.xda-developers.com/showthread.php?t=2586876
3. My blog
4. Press the thanks button if I really helped/assisted you.
Click to expand...
Click to collapse
I flash CMblk-ext on purekat ROM thread,now don't boot up n only show black reactor kernel on my screen
wanyakuza said:
I flash CMblk-ext on purekat ROM thread,now don't boot up n only show black reactor kernel on my screen
Click to expand...
Click to collapse
go into cwm
format system data cache
mount system data cache
flash cm7 rom zip
restart
note if using a rom that is based on bieltv.3 cm7 you need to use bieltv.3 kernel else wifi and bluetooth will not work
marcussmith2626 said:
go into cwm
format system data cache
mount system data cache
flash cm7 rom zip
restart
note if using a rom that is based on bieltv.3 cm7 you need to use bieltv.3 kernel else wifi and bluetooth will not work
Click to expand...
Click to collapse
but I don't have cm7 ROM ,n cannot format system.can u guide me how to flash DXMJ1 by odin?
wanyakuza said:
but I don't have cm7 ROM ,n cannot format system.can u guide me how to flash DXMJ1 by odin?
Click to expand...
Click to collapse
you said you had purekats - if its the version based on aosp or cm7 then you do have a rom that is bootable on a cm7 kernel on ext
anyway
guide for odin is on my firmware thread at top of dev section - you just have to read it
marcussmith2626 said:
you said you had purekats - if its the version based on aosp or cm7 then you do have a rom that is bootable on a cm7 kernel on ext
anyway
guide for odin is on my firmware thread at top of dev section - you just have to read it
Click to expand...
Click to collapse
I only have purekat1.5 n I have delete purekat1.0 bcoz I have make nandroid backup,can I flash it by purekat1.5?BTW if I use Odin to flash the new baseband are my phone lost root or something else?
hello, I completely follow the steps in the video and I have a problem. It don't have a network, I have a question, could it be the kernel or the rom...
this is the video by sir khizar ali, https://www.youtube.com/watch?v=j0MQMhEACbA
How can i fixed the problem?
Should I try another kernel???
AYA88 said:
hello, I completely follow the steps in the video and I have a problem. It don't have a network, I have a question, could it be the kernel or the rom...
this is the video by sir khizar ali, https://www.youtube.com/watch?v=j0MQMhEACbA
How can i fixed the problem?
Should I try another kernel???
Click to expand...
Click to collapse
This rom is based on cm7 - you must use a cm7 kernel that supports the Base rom
If you have no signal you may want to update your stock rom baseband by flashing the latest modem file for your region - see my firmware thread at top of Dev section or link in signature
marcussmith2626 said:
This rom is based on cm7 - you must use a cm7 kernel that supports the Base rom
If you have no signal you may want to update your stock rom baseband by flashing the latest modem file for your region - see my firmware thread at top of Dev section or link in signature
Click to expand...
Click to collapse
sir, what kernel should I use to this rom?
the kernel link in the video was blocked due to "copyright"..
I dont know what is the kernel used..
Do you know what kernel was used?
If no, then what alternative kernel shall I use to flash the rom?
Thanks sir,
AYA88 said:
sir, what kernel should I use to this rom?
the kernel link in the video was blocked due to "copyright"..
I dont know what is the kernel used..
Do you know what kernel was used?
If no, then what alternative kernel shall I use to flash the rom?
Thanks sir,
Click to expand...
Click to collapse
Either
http://forum.xda-developers.com/showthread.php?t=2673603
Or
Percy #2 cm kernel (Google it)
probably says in video but can't be bothered to watch it
marcussmith2626 said:
Either
http://forum.xda-developers.com/showthread.php?t=2673603
Or
Percy #2 cm kernel (Google it)
probably says in video but can't be bothered to watch it
Click to expand...
Click to collapse
thank you sir for the time and effort,
hello guys ,
im searching for lg e610 kernel with init.d support.
where i can find one ?
thanks.
ismainau said:
hello guys ,
im searching for lg e610 kernel with init.d support.
where i can find one ?
thanks.
Click to expand...
Click to collapse
you can enable init.d by this way
http://forum.xda-developers.com/showthread.php?t=1710980
it doesn't work
it doesn't work , i've found the file on another site because the link is dead . after i flashed it with clockwordmod it didn't work.
please help
for information i have a custom rom : i have cyanogenmod 11-2014013-UNOFFICIAL-e610
--- 3.4.0-CM
ismainau said:
it doesn't work , i've found the file on another site because the link is dead . after i flashed it with clockwordmod it didn't work.
please help
for information i have a custom rom : i have cyanogenmod 11-2014013-UNOFFICIAL-e610
--- 3.4.0-CM
Click to expand...
Click to collapse
you enable inti.d by type a code in post-boot.sh file on the link above
and you can try flash Skernel or monster kernel
didn't work
i edited the post_boot and it didn't work .
do you think thoses custom kernels would work with my custom rom ?
that's the link of my custom rom : http://forum.xda-developers.com/showthread.php?t=2519448
i need a good custom kernel compatible with my rom that has init.d support.
thanks in advance.
use the kernel that OP give in thread of the rom or use Skernel or monster kernel, and i think all version from beta 9 or above is support init.d
SMILEVN said:
use the kernel that OP give in thread of the rom or use Skernel or monster kernel, and i think all version from beta 9 or above is support init.d
Click to expand...
Click to collapse
tried all of your sollutions , none of them works
hmm
i don't have any init.d problem in beta 11, just flash rom and gapps, then flash mod and tweak i want
How do you test init.d work???
SMILEVN said:
hmm
i don't have any init.d problem in beta 11, just flash rom and gapps, then flash mod and tweak i want
How do you test init.d work???
Click to expand...
Click to collapse
with universal init.d