Database Users

Flash of new ClockworkMod recovery 3.0.2.7 hangs

Hi all!
I'm trying to provide my fantastic Blade with the new Clockworkmod recovery (3.0.2.7) from 3.0.1.4. The first flash failed at about 95%, so I'm afraid to reboot or use the Clockworkmod recovery. Clockworkmod recovery says I've currently 3.0.1.4 installed, but I think that one is broken.
Can I reboot with a damaged Clockworkmod?
Retrying the flash also fails, but now quicker (before there is a visible progress bar). I use the newest rom manager: 4.3.1.5, and MoDaCo Custom rom for the blade r12 (which has some serious reception issues I just recently found out).

Well, I sucessfully flashed 3.0.2.6 with the Rom manager.
Cheers!

I also installed this recovery....
It hangs up....
It can't get into CockworkMod recovery.
The only solution was to flash another, older, recovery via ROM Manager...
I flashed ClockworkMod 3.0.0.6 and everything works fine right now...

I think the latest version is only for Gen 2.
Are you guys on Gen 1?

Hi Spiceworm here, but YES indeed it was a GEN1 phone.
I flashed it to a GEN2 and now the flash of 3.0.2.7 was successful.

Hi, since u r having Gen2 now, y not try CW 4.0.0.2?
Sent from Blade Gen2 (CM7 V5 Naked) using xda app

how to get CWM for Ideapad k1

I've seen some roms posting about cwm but I don't have it. I am rooted running khanning's AOSP rom but i wan to flash the cm10 port. When I go into rom manager it recognizes my ideapad as a Transformer so I can't flash clockworkmod recovery there. Is there another place to download it?

If you're using khanning's AOSP rooted rom you already have cwm recovery.
Read 1st post on that thread and he has explained how to get to cwm recovery.
Don't install any other cwm recovery unless you know and are sure about what you're doing. You might brick your device.

install cwm recovery image for IdeaPad K1
Hetalk said:
If you're using khanning's AOSP rooted rom you already have cwm recovery.
Read 1st post on that thread and he has explained how to get to cwm recovery.
Don't install any other cwm recovery unless you know and are sure about what you're doing. You might brick your device.
Click to expand...
Click to collapse
I think you need to nvflash to install cwm recovery image first, then use khanning's AOSP CMW Rom.
the link posted by khanning for K1_CWM_120109_Rooted_nvflash_R2.zip is no longer working. does anyone have a refresh link?
http://forum.xda-developers.com/showthread.php?t=1564002

heyis4horses said:
I've seen some roms posting about cwm but I don't have it. I am rooted running khanning's AOSP rom but i wan to flash the cm10 port. When I go into rom manager it recognizes my ideapad as a Transformer so I can't flash clockworkmod recovery there. Is there another place to download it?
Click to expand...
Click to collapse
From a terminal session:
su
k1recovery
The K1 will will reboot in recovery with CWM running.

[Q] Installing CWM and Cyanogen MOD on Nook Color

I have a friend who has recently gottem a few scratch and dent Nook Colors, and I'm trying to help him install CWM and Cyanogen on them. I have CWM and Cyanogen 10.2, but I've been updating fro older versions, and haven't installed over stock in a while, so I'm trying to make sure I'm up to data eon getting the latest CWM and Cyangen ROMs installed.
So the situation is, if I have a Nook Color that is stock, and has already been rooted, can I install the CWM ROM Manager APK, use that to install the latest CWM image to EMMC, and then boot to CWM recovery and install whatvery ROM I choose, say Cyanogen 10.2? Will different versions of the Stock frimware make a difference?
This is the process I think will work, but its been a while.
Thanks

deamon_knight said:
I have a friend who has recently gottem a few scratch and dent Nook Colors, and I'm trying to help him install CWM and Cyanogen on them. I have CWM and Cyanogen 10.2, but I've been updating fro older versions, and haven't installed over stock in a while, so I'm trying to make sure I'm up to data eon getting the latest CWM and Cyangen ROMs installed.
So the situation is, if I have a Nook Color that is stock, and has already been rooted, can I install the CWM ROM Manager APK, use that to install the latest CWM image to EMMC, and then boot to CWM recovery and install whatvery ROM I choose, say Cyanogen 10.2? Will different versions of the Stock frimware make a difference?
This is the process I think will work, but its been a while.
Thanks
Click to expand...
Click to collapse
Follow this guide http://forum.xda-developers.com/showthread.php?t=1941858to go from stock (or rooted stock) to CM 10.1 with CWM installed on emmc, along with the ROM ... I chose the latest 10.1 RC from just a few days ago. Process went flawlessly.

Thanks remmian, but that link appears to be for installing to an SD Card, rather than EMMC. I'm going to try and see what I can figure out.
Thanks

This thread:
http://forum.xda-developers.com/showthread.php?p=12797652
Sent from my Nook HD+ running CM10.1 on emmc.

Help change stock recovery / revert to stock recovery (CWM based recovery) [SOLVED]

Hello friends,
I have rooted Galaxy i9505 international. Installed CWM based recovery 6.0.3.2(0611), and flashed last stable CM (cm-10.2.1-jfltexx).
Boot time have become longer (way longer) since installing CWM based recovery.
Couldn't find a decent post about how to:
1) Revert back to stock recovery.
or
2) Change the CWM based recovery to official CWM.
Anyone know how to do either?
Or maybe had the same problem with CWM based recovery?

Pogromonolith said:
Hello friends,
I have rooted Galaxy i9505 international. Installed CWM based recovery 6.0.3.2(0611), and flashed last stable CM (cm-10.2.1-jfltexx).
Boot time have become longer (way longer) since installing CWM based recovery.
Couldn't find a decent post about how to:
1) Revert back to stock recovery.
or
2) Change the CWM based recovery to official CWM.
Anyone know how to do either?
Or maybe had the same problem with CWM based recovery?
Click to expand...
Click to collapse
Did you consider trying a different recovery (PhilZ) or a different ROM?

Look for a recovery you want to try if its a zip file flash it with CWM and if its odin file flash it with odin.
Pogromonolith said:
Hello friends,
I have rooted Galaxy i9505 international. Installed CWM based recovery 6.0.3.2(0611), and flashed last stable CM (cm-10.2.1-jfltexx).
Boot time have become longer (way longer) since installing CWM based recovery.
Couldn't find a decent post about how to:
1) Revert back to stock recovery.
or
2) Change the CWM based recovery to official CWM.
Anyone know how to do either?
Or maybe had the same problem with CWM based recovery?
Click to expand...
Click to collapse

malybru said:
Did you consider trying a different recovery (PhilZ) or a different ROM?
Click to expand...
Click to collapse
Here's a copy of 1 of philz recoveries you could flash in cwm

malybru said:
Did you consider trying a different recovery (PhilZ) or a different ROM?
Click to expand...
Click to collapse
The latest CM snapshot booted a bit faster.
Actually after all those attempts I can't really remember how long did it take to boot before installing CWM..
But it does seems slower.
terminator1983 said:
Look for a recovery you want to try if its a zip file flash it with CWM and if its odin file flash it with odin.
Click to expand...
Click to collapse
I prefer to flash the original CWM.
How can I flash it on top of the CWM based recovery?
Files there are img files.

Look in xda development section you will find it zip format or i think you can download a zip file of another recovery and the replace the recovery within the zip file with the one you want to flash.
If you want to flash it in .img format you can do that with heimdall but you will need the pit file of 19505 too.
Pogromonolith said:
The latest CM snapshot booted a bit faster.
Actually after all those attempts I can't really remember how long did it take to boot before installing CWM..
But it does seems slower.
I prefer to flash the original CWM.
How can I flash it on top of the CWM based recovery?
Files there are img files.
Click to expand...
Click to collapse

Could not find any ZIP of the official Clockworkmod Recovery.
Is there any other way to install it?
Or better yet, a way to revert to stock recovery (from there I can install as in the beginning)?
Btw, is it ok to just replace recovery? Or should I "uninstall" my old recovery before installing the new one?

Pogromonolith said:
Could not find any ZIP of the official Clockworkmod Recovery.
Is there any other way to install it?
Or better yet, a way to revert to stock recovery (from there I can install as in the beginning)?
Btw, is it ok to just replace recovery? Or should I "uninstall" my old recovery before installing the new one?
Click to expand...
Click to collapse
Here's a Link for either a zip or Odin cwm & just flash it over previous version or flash philz I gave earlier ?

11calcal said:
Here's a Link for either a zip or Odin cwm & just flash it over previous version or flash philz I gave earlier ?
Click to expand...
Click to collapse
Downloaded, flashed and now have ClockworkMod 6.0.4.7
Thank you.
Just for future knowledge, does anyone knows how to revert to stock recovery?

Pogromonolith said:
Downloaded, flashed and now have ClockworkMod 6.0.4.7
Thank you.
Just for future knowledge, does anyone knows how to revert to stock recovery?
Click to expand...
Click to collapse
Hi,
You will get stock recovery if you flash a stock firmware.
There are also some stock recoveries listed HERE

malybru said:
Hi,
You will get stock recovery if you flash a stock firmware.
There are also some stock recoveries listed HERE
Click to expand...
Click to collapse
Stock recoveries and firmwares.
Cheers!

[Q] CM7 to CM11 on eMMMC

Quick question - I rooted my Nook Color to CM7 eons ago and it works fine, however I want to load Kit Kat on there now. Can I simply get the CM11 image and use the ancient version of CWM that I first put on it years back? Or will I need to upgrade my CWM to something more current to load the newer Kitkat kernels?

rbk123 said:
Quick question - I rooted my Nook Color to CM7 eons ago and it works fine, however I want to load Kit Kat on there now. Can I simply get the CM11 image and use the ancient version of CWM that I first put on it years back? Or will I need to upgrade my CWM to something more current to load the newer Kitkat kernels?
Click to expand...
Click to collapse
You will need to use CWM 6.0.4.7 for cm11 nightlies prior to 5/16/14. Use CWM 6.0.4.8 for cm 11 nightlies after 5/16/14.

hwong96 said:
You will need to use CWM 6.0.4.7 for cm11 nightlies prior to 5/16/14. Use CWM 6.0.4.8 for cm 11 nightlies after 5/16/14.
Click to expand...
Click to collapse
Great, thanks. As my CWM is so old (maybe 3.x?), is that just a matter of: install zip from sdcard -> choose zip from sdcard ?

rbk123 said:
Great, thanks. As my CWM is so old (maybe 3.x?), is that just a matter of: install zip from sdcard -> choose zip from sdcard ?
Click to expand...
Click to collapse
Before proceeding make a backup using CWM.
Download the appropriate CWM (e.g. for CM11 Snapshot M6 use CWM 6.0.4.7 & for CM11 5/17/14 nightly use 6.0.4.8).
Boot into current recovery.
Install zip
Choose zip to install
Reboot.
Should now see CWM-based Recovery v6.0.4.7 or 6.0.4.8

Ok, that's what I was hoping. Thanks.

nm

Can I use the latest CWM to flash CM10?

Harlley Sathler said:
Can I use the latest CWM to flash CM10?
Click to expand...
Click to collapse
No. It needs to be earlier than v6045. I have v5504 and v6012 on my NC tips thread linked in my signature.
Sent from my SCH-i705 using XDA Premium HD app