Hey guys,
I've got L7 p708 (Mexico). It work well with CM10.1 (all OK including 8Mpx camera).
I'm trying the CM11 with ROM: L7 4.4.2 KOT49H BETA Unofficial CyanogenMod 11.0 rom build by Cr3pT and with the dedicated p708 kernel.
for gapps, I used the MINI MODULAR PACKAGE.
All functions work except: FM and the famous 8Mpx camera.
I would like to share this test. Hope can help to advance on this topic.
adrienj said:
Hey guys,
I've got L7 p708 (Mexico). It work well with CM10.1 (all OK including 8Mpx camera).
I'm trying the CM11 with ROM: L7 4.4.2 KOT49H BETA Unofficial CyanogenMod 11.0 rom build by Cr3pT and with the dedicated p708 kernel.
All functions work except: FM and the famous 8Mpx camera.
I would like to share this test. Hope can help to advance on this topic.
Click to expand...
Click to collapse
CyanogenMod doesnt have radio lol and camera is still problematic too
@Lukijs: does the p708 is handled by the SlimKat 4.4.2 rom? Is there a compatible p708 kernel with this ROM?
for gapps, I used the MINI MODULAR PACKAGE.
Can't install CM11 on p708g
Hi, how did you "prepared" your p708 before flashing the CM11 Rom by Cr3pt?
I rooted my p708 (Telcel) using this method http://forum.xda-developers.com/showthread.php?t=2285466
Then I tryed to flash a few CM10.2 ROMs without any success, until I found this one by cr3pt and succeeded: http://forum.xda-developers.com/showthread.php?t=2472479
in the end I used a custom updater script file someone posted on the thread.
Now, I'm trying to flash CM11 by cr3pt but it keeps saying
This package if for "p708" devices; this is a "u0".
Click to expand...
Click to collapse
and then the installation is stopped. I've tryed flashing the baseband the thread says but still no success.
I wiped and formatted everything but the sd card before trying to flash CM11.
any advice? thanks in advace, I think this thread is a good idea, so there's one thread specifically for the p708
temedoro15 said:
Hi, how did you "prepared" your p708 before flashing the CM11 Rom by Cr3pt?
I rooted my p708 (Telcel) using this method http://forum.xda-developers.com/showthread.php?t=2285466
Then I tryed to flash a few CM10.2 ROMs without any success, until I found this one by cr3pt and succeeded: http://forum.xda-developers.com/showthread.php?t=2472479
in the end I used a custom updater script file someone posted on the thread.
Now, I'm trying to flash CM11 by cr3pt but it keeps saying and then the installation is stopped. I've tryed flashing the baseband the thread says but still no success.
I wiped and formatted everything but the sd card before trying to flash CM11.
any advice? thanks in advace, I think this thread is a good idea, so there's one thread specifically for the p708
Click to expand...
Click to collapse
I didn't saw this issue with mine but try this:
in the ROM zip file, edit META-INF\com\android\metadata and replace
Code:
pre-device=p708
by
Code:
pre-device=u0
then edit the file META-INF\com\google\android\updater-script and replace
Code:
assert(getprop("ro.product.device") == "p708" || getprop("ro.build.product") == "p708"
by
Code:
assert(getprop("ro.product.device") == "u0" || getprop("ro.build.product") == "u0"
For P700/705/708 ,I just very sériously wait ( i pray so much !!!!!! ) that there are FM-Radio working on CM11 for "perfect" rom in place of stocks !!!!!!!!!! :crying:
......If somebody know android and the rom's development , that would be fabulous to think about !
Subscribed.
Thank you
adrienj said:
I didn't saw this issue with mine but try this:
in the ROM zip file, edit META-INF\com\android\metadata and replace
Code:
pre-device=p708
by
Code:
pre-device=u0
then edit the file META-INF\com\google\android\updater-script and replace
Code:
assert(getprop("ro.product.device") == "p708" || getprop("ro.build.product") == "p708"
by
Code:
assert(getprop("ro.product.device") == "u0" || getprop("ro.build.product") == "u0"
Click to expand...
Click to collapse
Thanks a lot! I managed to flash the CM11 rom, that did the trick. I like how the rom looks, but I feel it kinda laggish compared to CM10.2 by cr3pt. It doesn't bother me, just saying.
temedoro15 said:
Thanks a lot! I managed to flash the CM11 rom, that did the trick. I like how the rom looks, but I feel it kinda laggish compared to CM10.2 by cr3pt. It doesn't bother me, just saying.
Click to expand...
Click to collapse
on CM10.2 by cr3pt, does the camera 8Mpx work?
adrienj said:
on CM10.2 by cr3pt, does the camera 8Mpx work?
Click to expand...
Click to collapse
It worked on my device, but the rom I flashed had a modded updater-script. There's a patch that supposedly repairs the camera, but I didn't need it.
Look in the page 12 in the CM10.2 build by Cr3pt thread, just replace the updater-script in the original rom with the one posted there.
In CM11 my camera doesn't work (p708).
there is no new release for p708 since 06/01/14 on CM11, but I saw that the front camera work on hangout in video mode.
Related
Hi,
How i can downgrade to CM 10?
I don't like his rom, and i want return to CM.
How i can do this?
hi! yes, you can do it! download the ROM from here http://get.cm/?device=e610 and, once executed all reset and flashed it, download and flash Baseband v10 from here http://forum.xda-developers.com/showthread.php?p=41344276#post41344276
Ermenpre said:
Hi,
How i can downgrade to CM 10?
I don't like his rom, and i want return to CM.
How i can do this?
Click to expand...
Click to collapse
download the cm rom, and flash it with cwm, after if you don`t have sim, flash v10 baseband
Hi all,
Before to explain my problem, I want to do my Apologies because I'm french and my English isn't Fluently ^^
So, I have a TF300T unlocked with TWRP. I setup the stable CM 10.2 for my tab and it was a success.
But when i want to update with the CM11 proposed in Settings of the Tab, i have this message in TWRP :
E : error executing updater in zip '/sdcard/cm-11.....
Error Flashing ZIP.
Failed in red
My intial config is JB Stock 4.2.1.
I tried to install a CM 11 directly with TWRP and didn't work ....
Can you Help ME please ?
I have to install CWM ? But wich version ?
Thanks for you help .
(Now i set up a official 4.2 from Asus (available on Asus Website) in waiting an issue)
With an OmniRom, I have the same problem ...
Sense
Sensenix said:
Hi all,
Before to explain my problem, I want to do my Apologies because I'm french and my English isn't Fluently ^^
So, I have a TF300T unlocked with TWRP. I setup the stable CM 10.2 for my tab and it was a success.
But when i want to update with the CM11 proposed in Settings of the Tab, i have this message in TWRP :
E : error executing updater in zip '/sdcard/cm-11.....
Error Flashing ZIP.
Failed in red
My intial config is JB Stock 4.2.1.
I tried to install a CM 11 directly with TWRP and didn't work ....
Can you Help ME please ?
I have to install CWM ? But wich version ?
Thanks for you help .
(Now i set up a official 4.2 from Asus (available on Asus Website) in waiting an issue)
With an OmniRom, I have the same problem ...
Sense
Click to expand...
Click to collapse
You need to use TWRP 2.6.3.2 to flash CM11 or OmniROM. Install it and then reboot back into CM10.2 and then install CM11.
Is there no recovery that will install both cm10 and cm11?
Sent from my TF300T using Tapatalk
kmoffat said:
Is there no recovery that will install both cm10 and cm11?
Sent from my TF300T using Tapatalk
Click to expand...
Click to collapse
It is not possible to flash both CM10 based ROMs and CM11 based ROM on the same TWRP without editing the ROM itself.
cmendonc2 said:
It is not possible to flash both CM10 based ROMs and CM11 based ROM on the same TWRP without editing the ROM itself.
Click to expand...
Click to collapse
Patches to make both work are under way. My MultiROM TWRP can do both without changes, but it is much harder to integrate into a normal ROM+recovery build. Those patches are still unstable.
Sent from my TF300T using Tapatalk
suggestions?
I currently am (happily) running cm10.2 with twrp v2.6.3.0, bootloader US_epad-10.6.1.27.5-20130902 but would like to try kitkat. Would multirom be an option? (I'm new to this, and have only tried CROMi-x and CM10.2) Or would a flash of an updated twrp and cm11 be a better choice for a newbie?
thanks!
SOME NEW PORTED ANDROID 4.4.4 KITKAT ROMS FOR SAMSUNG CAPTIVATE
ANDROID 4.4.4 KITKAT CAPTIVATE ROMS:
- SlimKat 4.4.4 - 9.0 weekly 8328 - 2015.01.01
- SlimKat 4.4.4 - 8.18 weekly 8115 - 2014.12.02
- SlimKat 4.4.4 - 8.0 weekly 6965 - 2014.09.23
- SlimKat 4.4.4 - 7.8 weekly 6274 - 2014.09.02
- SlimKat 4.4.4 - 7.6 weekly 6228 - 2014.08.26
- SlimKat 4.4.4 - 6.8 weekly 5772 - 2014.07.28
(original thread)
- OmniRom 4.4.4 official 2015.01.28 nightly
- OmniRom 4.4.4 official 2014.12.06 nightly
- OmniRom 4.4.4 official 2014.09.01 nightly
- OmniRom 4.4.4 official 2014.07.09 nightly
- OmniRom 4.4.4 official 2014.06.23 nightly
(original thread)
- ArchiDroid 4.4.3 - 2014.06.19 fixed version (gapps included)
(original thread)
- Carbon (KK4.4.4) unofficial - 2014.07.13-1450
(original thread)
- C-Rom v7.1 (KK4.4.4) - 2014.06.22
(original thread)
- EHNDROIX V 14.8.8 (KK4.4.4) - 2014.08.07
(original thread)
- L-Droid-v2.2.2 (KK4.4.4) - 2014.07.07
(original thread)
- BeanStalk-4.4.4007 (KK4.4.4) - 2014.07.12
(original thread)
- SpiritRom v1.4 (KK4.4.4) - 2014.09.22
- SpiritRom v1.2 (KK4.4.4) - 2014.08.17
(original thread)
- LiquidSmooth v3.2 Odex (KK4.4.4) - 2014.08.30
(original thread)
- Omni + Floating Windows + Lockscreen Notifications + App Circle Bar (KK4.4.4)- 2014.08.11
(original thread)
- Mackay Rom 4.9.12 (KK4.4.4) - 2014.09.14
(original thread)
- AOKP 4.4.4 - 2014.12.04
(original thread)
- PAC ROM KK 4.4.4 - 2014.12.06
(original thread)
GAPPS: PARANOID MODULAR PACKAGES (ART compatible)
PA Gapps packages
OTHER NON 4.4.x KITKAT ROMS
- AOKP 4.2.2 Milestone 2
(gapps needed)
- GlassMix Rom 4.1.2 - 2014.06.27 (by KruciFFF)
(original thread)
****
KK 4.4.3 + 4.4.4 COMPATIBLE KERNELS
- NeatKernel 1.09, 1.11 or newer.
- Semaphore kernel 3.4.3 updated by iyahman
- CM11 Captivate 4.4.3, 4.4.4 stock kernel (attached)
Monfro said:
SOME NEW PORTED 4.4.2 KITKAT ROMS FOR SAMSUNG CAPTIVATE
Stock CM11 kernel
4.4.2 CAPTIVATE ROMS:
OmniRom official 2014.05.08 nightly
(original thread)
Paranoid Android 4.3 beta 3 - 2014.05.08
(original thread)
SlimKat 4.9 weekly 3921 - 2014.05.05
(original thread)
GAPPS: PARANOID MINI MODULAR PACKAGE (works with ART)
Goo.im
Android File Host
Dev-Host
I will update this thread and post new roms in my free time, not on regular basis.
Click to expand...
Click to collapse
Will this work with captivate?
galaxys3lover said:
Will this work with captivate?
Click to expand...
Click to collapse
Of course!!
I ported these roms so Captivate users can have more roms to play with.
Roms uploaded.
Unfortunately today i did not succeed to upload also "SlimKat 4.9 weekly 3921 - 2014.05.05" : i will on monday.
To all: feel free to request the port of any Galaxy S I9000 or Vibrant rom.
When i will have some spare time i will port them to Captivate.
Downloading SLIMKAT! Thx!!!
Edit: It's amazing your work on SlimKat, really, really fast. Great job
Rezakorn said:
Downloading SLIMKAT! Thx!!!
Edit: It's amazing your work on SlimKat, really, really fast. Great job
Click to expand...
Click to collapse
Thank You.
Mainly Semaphore Kernel has the merit to make "SlimKat stable 3" so fast.
You can tweak it with Semaphore Manager app (i suggest SmartassV2 and ROW)
Maybe i will incorporate Semaphore Kernel in next ports...
On the other hand if i use CM11 as standard kernel, users can flash later Semaphore or NeatKernel, and maybe reflash rom if they want CM11 kernel.
So they have 3 different kernel options (CM11, Semaphore and NeatKernel)
only kitkat?
http://forum.xda-developers.com/showthread.php?t=2660668
can u please port this rom with it's integrated kernel ..sorry for asking. I know port a kernel is difficult ..just asking
thank you for ur great work..
Cool! Thank You!
Personally, which combination gives more battery life??
ajeesh vijayan said:
http://forum.xda-developers.com/showthread.php?t=2660668
can u please port this rom with it's integrated kernel ..sorry for asking. I know port a kernel is difficult ..just asking
thank you for ur great work..
Click to expand...
Click to collapse
I was also going to ask for this but kind of hesitated since it is ICS. People using this are extremely happy with it.
Also @Monfro could you please add the Md5ums of the files if it is not much trouble?
And of course thanks for your work!
ajeesh vijayan said:
http://forum.xda-developers.com/showthread.php?t=2660668
can u please port this rom with it's integrated kernel ..sorry for asking. I know port a kernel is difficult ..just asking
thank you for ur great work..
Click to expand...
Click to collapse
eNemy- said:
I was also going to ask for this but kind of hesitated since it is ICS. People using this are extremely happy with it.
Also @Monfro could you please add the Md5ums of the files if it is not much trouble?
And of course thanks for your work!
Click to expand...
Click to collapse
Probably this week i will work on it; i have seen too a lot of people happy with it.
From my personal experience i remember that AOKP was the fastest ICS rom, and when 4.1 Jelly Bean was out it was smoother, thanks to project butter. So i think that 4.1 and 4.3 should be both faster than 4.0 ICS. Anyway we will see soon...
I have noticed that i made a mistake on both versions of OmniRom i posted.
I uploaded the new corrected versions, so OmniRoms now are good to go.
Monfro said:
SOME NEW PORTED 4.4.2 KITKAT ROMS FOR SAMSUNG CAPTIVATE
Click to expand...
Click to collapse
My Slimkat is very smooth and fast but I can't get root access any suggestions?
- Posted SlimKat build.4.9 with NeatKernel.
- Posted MackayROM CM9 with GearKernel.
Posted gapps for ICS 4.0 (removed everything about FaceUnlock: no front camera on Captivate)
Avikar said:
My Slimkat is very smooth and fast but I can't get root access any suggestions?
Click to expand...
Click to collapse
Settings/About: tap build number many times to activate developer options, and in developer options select root: apps and adb.
Thanks.
Monfro said:
- Posted SlimKat build.4.9 with NeatKernel.
- Posted MackayROM CM9 with GearKernel.
Posted gapps for ICS 4.0 (removed everything about FaceUnlock: no front camera on Captivate)
Settings/About: tap build number many times to activate developer options, and in developer options select root: apps and adb.
Click to expand...
Click to collapse
Loving it!!!!!
you. are so fast...anybody tried new cm9? how's it ..is it having universal gear kernel ..I had problem with gear kernel (lost imei) before ...
ajeesh vijayan said:
you. are so fast...anybody tried new cm9? how's it ..is it having universal gear kernel ..I had problem with gear kernel (lost imei) before ...
Click to expand...
Click to collapse
It packs GearKernel for ICS, not universal version.
It should be ok.
I decided to use it since it is based on Semaphore, also adding OC steps and it is updated.
There are also a lot of other ICS kernels available.
If you want to be sure before flashing make a backup of EFS folder.
If you will lose the IMEI flash a 4.3 rom like Slim and IMEI will be back.
I forget to write that the rom and kernel have the BigMem mod.
Please report feedbacks on this and other roms.
And also on kernels for 4.4.2 roms...better to use as stock NeatKernel, Semaphore or plain CM11??
Monfro said:
- Posted SlimKat build.4.9 with NeatKernel.
- Posted MackayROM CM9 with GearKernel.
Posted gapps for ICS 4.0 (removed everything about FaceUnlock: no front camera on Captivate)
Click to expand...
Click to collapse
E: Cant mount / sdcard
E: Cant mount / external_sd
I formatted my cappy back to stock and then even same problem persists.
Avikar said:
E: Cant mount / sdcard
E: Cant mount / external_sd
I formatted my cappy back to stock and then even same problem persists.
Click to expand...
Click to collapse
MackayROM CM9??
Since i can't it now:
Can you please flash the rom and then directly one of these kernels (flash rom+kernel then reboot):
Semaphore 1.3
Semaphore 1.2.6
Please let me know
Monfro said:
MackayROM CM9??
Since i can't it now:
Can you please flash the rom and then directly one of these kernels (flash rom+kernel then reboot):
Semaphore 1.3
Semaphore 1.2.6
Please let me know
Click to expand...
Click to collapse
Dear Monfro,
It goes like this:
1: Boot to recovery.
2: Wipe data + cache
3: install MackayROM CM9 from sd card:: It restarts itself and boot to recovery.
4: install from sd card/ external_sd :: and then no memory exists there.
5: I have to go back to stock every time.
Avikar said:
Dear Monfro,
It goes like this:
1: Boot to recovery.
2: Wipe data + cache
3: install MackayROM CM9 from sd card:: It restarts itself and boot to recovery.
4: install from sd card/ external_sd :: and then no memory exists there.
5: I have to go back to stock every time.
Click to expand...
Click to collapse
I forget CM9 is on an old partition layout.
Flash the first time: it converts partitions to the layout used in CM9, then it reboots to the recovery just flashed.
It is normal this way.
Flash the second time: it installs the rom.
But you can't since /sd card and /external_sd are not mounted.
Try this: flash one of the semaphore kernel i linked. reboot recovery and then flash rom.
Tomorrow or the day after i will post again the rom with some modifications.
Q&A for [KK][5.5.12]MIUI 6 for LG G2 All Variants Based on Stock LG V20C
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KK][5.5.12]MIUI 6 for LG G2 All Variants Based on Stock LG V20C. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
I am on vs980. Any suggestion which version of bootstack to be used?
Can't get download to work. Anyone have a working mirror?
guide me up this room.
Like. But can be up this Room from any room?
Do i need to flash cloudy's kitkat kernel before flashing this rom..?
I'm currently on Cloud G2 3.0 Lollipop.
kundalus said:
I am on vs980. Any suggestion which version of bootstack to be used?
Click to expand...
Click to collapse
you must use your "model" jellybean (JB) bootloader.
Naejin said:
Can't get download to work. Anyone have a working mirror?
Click to expand...
Click to collapse
MIRROR (MEGA) by me:
(MEGA)mega.co.nz/#!IclzXYTQ!8JNsMA24fDiWMJBzyL7_Uos95pV9MoGBzCxF9OshzUM(link)
5.5.8 version
ktsvuitinh said:
Like. But can be up this Room from any room?
Click to expand...
Click to collapse
Yes, you only need to install before wipes and zip rom, the correct bootloader (jb) and your baseband
Sameer_Ahmed said:
Do i need to flash cloudy's kitkat kernel before flashing this rom..?
I'm currently on Cloud G2 3.0 Lollipop.
Click to expand...
Click to collapse
The kernel is inside of the rom. I prefer use philz recovery (last update) , then you must flash jb bootloader, baseband kk , wipes , then the miui zip rom. That´s all
Here, link of philz:
(link)goo.im/devs/philz_touch/CWM_Advanced_Edition/(link)
See yaa!
guide up rom.
Thanks for support. I'm using TWRP flash the rom, but my phone has no imei or baseband. " please use other recovery to flash the rom " ==> i can user CWM to the flash this rom?
ktsvuitinh said:
Thanks for support. I'm using TWRP flash the rom, but my phone has no imei or baseband. " please use other recovery to flash the rom " ==> i can user CWM to the flash this rom?
Click to expand...
Click to collapse
Philz, lastest version.
Take a look of my previus post here.
Does not detect SIM card at all in D800.
Blur effect
1. Miui v6 is supposed to have blur effect behind notification panel, behind recent apps panel and other places, but there is only in the background of the open folders.
2. Also the LG settings for screen-off animation not work.
3. And there is no available option to safely remove USB storage.
Does not detect SIM card at all in D800.
djbeta66 said:
Does not detect SIM card at all in D800.
Click to expand...
Click to collapse
Hi ! try to not repeat posts.
Did you try flashing with philz? Maybe i´m wrong , but I´am almost sure you flashed with twrp.
That´s being a regular problem with twrp since V5 already
Guys i cant flash .zip file via twrp or philz. It says "installation aborted" wiped cache factory reset and cache partition. I have 20c kitkat version. What should i do? Should i flash kitkat baseband or.jb bootloader? Please help me.
And i cant reach goo.im . Only white page and words. Cant download newest version of philz. Please help me.
guide me up this rom
I'm using LS980, I'm Flash this rom so many but still no detech Sim. You can guid me more details for LS980. Thank you so much!
great work! with my support
How can i remove the menu button on the latest relase?
I have failed when opdate via OTA on my L01F.
Please check my log file attached.
I have failed when update via OTA on my L01F.
Please check my log file attached.
Camera
Camera isn't work my device (D802).
how i can make double tap on/off enable ?
because i cant active that after change the lg setting and tried install kerner bruce2728 but bootloop -.-
Hello Guys,
Aakash here! I am not able to flash my Custom rom in yu yureka Did all sort of thing which was Required,but unfortunately no Luck:crying:
Rooted my Phone by extracting updated SuperUser.zip file
Flashed TWRP recovery version 2.8.5.0, (was unable to flash higher because it was going in bootloop)
When Flashing RR rom or any other rom it gives an E: Error Executing updator binary in zip
Trying to fix this error from past 3 days but no success. Guys please share ur knowledge and comment it out.
Edited update-script by removing first two lines from Meta-INF
assert(getprop("ro.product.device") == "YUREKA" || getprop("ro.build.product") == "YUREKA" || abort("E3004: This package is for device: YUREKA; this device is " + getprop("ro.product.device") + ".");
assert(cm.verify_trustzone("TZ.BF.3.0.R2-00034") == "1");
Even followed some online tutorial but still facing this issue
Links :- https://kalitutorials.wordpress.com/2015/06/19/solve-error-executing-updater-binary-in-zip/
@aakash devadiga
You can't flash latest ROMs with the TWRP version you're currently using. You've to upgrade it. You don't need to edit update-script. Check official TWRP site for latest version.
What is the current ROM installed in your device?
saurav007 said:
@aakash devadiga
You can't flash latest ROMs with the TWRP version you're currently using. You've to upgrade it. You don't need to edit update-script. Check official TWRP site for latest version.
What is the current ROM installed in your device?
Click to expand...
Click to collapse
I am using yu yureka default rom which is based on cyanogenmod v11
Android version kitkat
aakash devadiga said:
I am using yu yureka default rom which is based on cyanogenmod v11
Android version kitkat
Click to expand...
Click to collapse
The reason you're getting bootloops with latest TWRP.
First update your device to latest ROM (12.1) and flash latest TWRP and you can flash any custom ROMs afterwards.
saurav007 said:
The reason you're getting bootloops with latest TWRP.
First update your device to latest ROM (12.1) and flash latest TWRP and you can flash any custom ROMs afterwards.
Click to expand...
Click to collapse
Hi Saurav can u send me the link of latest stable rom of cyanogen mod
aakash devadiga said:
Hi Saurav can u send me the link of latest stable rom of cyanogen mod
Click to expand...
Click to collapse
All stock COS for Yureka can be found here:
https://forum.xda-developers.com/yureka/general/yu-yureka-mirrors-official-cyanogen-t3107684
cm-12.1-YOG4PAS8A4 is last released build.
saurav007 said:
All stock COS for Yureka can be found here:
https://forum.xda-developers.com/yureka/general/yu-yureka-mirrors-official-cyanogen-t3107684
cm-12.1-YOG4PAS8A4 is last released build.
Click to expand...
Click to collapse
Bro which is the best rom for yureka in terms of battery and good kernal optimisation