Related
My 2 months old Touch HD doesn't charge the battery anymore.
If i plug the power cord, the notification led turns red for 5-7 sec., then it turns off, and the battery meter shows no charging.
I can sync it with PC but runs again on battery, even the check box (under the power meter) is unchecked.
The only way to charge the battery, is to let the battery drains out (the phone turns itself off) and remove the battery from phone for few minutes.
I have the original ROM 1.57.831.1 (47324) WWE from 04/08/09 and i tried one hard reset ("clear storage" from settings).
Does anyone know how to fix this ?
I'm verry disappointed. Now it does'nt charge even i remove the battery.
I think i'll try the warranty service.
No other suggestions ?
Are you sure it is the problem of the HTC HD? I got hte same problem. But because I charged my second battery which was newly bought from the official website HTC UK. My original battery works well. So I returned my second battery.
Try another battery.
ci6i said:
I'm verry disappointed. Now it does'nt charge even i remove the battery.
I think i'll try the warranty service.
No other suggestions ?
Click to expand...
Click to collapse
yep, same here...
my girlfriend and me, we own a HD, pretty much the same issue...
My device frist stated "unkown main battery status" and has been only willing to charge the battery while switched off and connected to PC (charger doesn't work).
My grilfriend's one now refuses to start at all.
One thing for sure - its not battery related since my fully recharged battery doesn't make her device starting.
I sometimes pulled out the battery without swichting the device off, or left it running for days before reseting it...i guess that might have triggered the problem...
gotta send it in, hopefully they don't mind my custom rom!
ci6i said:
My 2 months old Touch HD doesn't charge the battery anymore.
If i plug the power cord, the notification led turns red for 5-7 sec., then it turns off, and the battery meter shows no charging.
I can sync it with PC but runs again on battery, even the check box (under the power meter) is unchecked.
The only way to charge the battery, is to let the battery drains out (the phone turns itself off) and remove the battery from phone for few minutes.
I have the original ROM 1.57.831.1 (47324) WWE from 04/08/09 and i tried one hard reset ("clear storage" from settings).
Does anyone know how to fix this ?
Click to expand...
Click to collapse
I had this problem to.... Change of USB cable did the trick! So.....it's possible that your USB mini cable is dead. Try another USB if you haven't tried it yet.
Thank you all.
alper1 said:
I had this problem to.... Change of USB cable did the trick! So.....it's possible that your USB mini cable is dead. Try another USB if you haven't tried it yet.
Click to expand...
Click to collapse
I don't think it's the cable because i let the phone charging on my desk and suddenly, after few minutes (sometimes 1 min, sometimes 60 min) it stops charging (without touching/moving the cable),
ccieuser said:
...Try another battery
Click to expand...
Click to collapse
I'll try to find another battery but my friends use Nokia
4irm said:
...One thing for sure - its not battery related since my fully recharged battery doesn't make her device starting.
I sometimes pulled out the battery without swichting the device off, or left it running for days before reseting it
Click to expand...
Click to collapse
Well, in your case, for sure its not battery related.
After i left the battery out of the phone for 6 hours, it start charging again for 45 min then, the notification led start blinking red and green. After 2 minutes, the led turns off and i started the phone with 40% battery life.
It's driving me crazy and i don't know what to think!
I start to believe it's a battery problem but i'll ask for service opinion too, since i payed a lot of money for this.
Solved
My handset was repaired in service.
The problem was hardware related, generated by malfunction of switching power alimentation mechanism to motherboard.
Hi,I have a Android gingerbread 2.3,haspl v.3,MAGLDR113,it's second time my htc block and dont want to restart from the buton,i have remove the battery and it dosnt want to turn on ,there is no screen,the battery was charget,but the red light don't light when i plug the cabel,in my PC dont recognise usb,nothing and the phone,i try for 1 day to remove a battery,but no result,1st time when it happens it work,but for a week i can't use it,Sorry For my English,Some ideas what can i do before i took it back in the store
sounds like it could be a simple flat battery. when magldr is installed you cannot charge the phone unless android is running, so when it is off it does not charge.
if you can try another battery, or your battery in a winmo hd2, that will tell you if its teh battery.
If you have a spare usb cable (any type, doesnt have to be a hd2 micro usb cable) cut end off, bare red and black, hold red to + and black to - on teh battery for about a minute, which should give it enough power to charge.
Also check very carefully that you dont have a bent battery pin from all teh battery in/out. they bend easily.
i hava a Bat charger and charge the bat all night,and the morning it show me that bat is charget,put it on the phone,but nothing ... cant turn on
Maybe battery is dead. Do you own a volt meter an can check the voltage provided by the battery? It shoud show up about 4 volt.
---------- Post added at 08:12 PM ---------- Previous post was at 08:04 PM ----------
Maybe battery is dead. Do you own a volt meter and can check the voltage provided by the battery? It shoud show up about 4 volt.
i took the bat to my friend with devace to check the battery,and everything is OK,but the phone didn't turn on,Can i reinstal the Android ?and how can i do it
Is there a program that can connect to the phone and erase everything
To wipe the phone install the HD2 toolkit, you can download it here.
It includes every tool needed for maintaining your HD2.
Be sure to install the drivers!
Start the program and press the Task29 button, follow the instructions provided. When it's finished your HD2 will be fully wiped, so you would need to reinstall everything.
Do so by doing a MAGLDR repartition. After that choose MAGLDR update recovery to flash the Clockworkmod recovery.
Then go into the Clockworkmod recovery and flash your rom.
Now your HD2 should be fully wiped
BUT! If your PC doesn't even recognize your HD2, and you can't even get to the bootloader screen by pressing and holding both volume down and the "end call" button. Then it's probably a hardware failure.
Maxp101 said:
To wipe the phone install the HD2 toolkit, you can download it here.
It includes every tool needed for maintaining your HD2.
Be sure to install the drivers!
Start the program and press the Task29 button, follow the instructions provided. When it's finished your HD2 will be fully wiped, so you would need to reinstall everything.
Do so by doing a MAGLDR repartition. After that choose MAGLDR update recovery to flash the Clockworkmod recovery.
Then go into the Clockworkmod recovery and flash your rom.
Now your HD2 should be fully wiped
BUT! If your PC doesn't even recognize your HD2, and you can't even get to the bootloader screen by pressing and holding both volume down and the "end call" button. Then it's probably a hardware failure.
Click to expand...
Click to collapse
Magldr repartition flashes cwm so no need for the update recovery step. That's for, well the clue is in the name,,, updating the cwm version on an already partitioned instal.
Okay, thanks for clarifying that!
Didn't know it worked like that, I only use CLK.
Sent from my HD2 using xda premium
thanks for the information,but Isn't happened like I expect,I still cannot to turn the phone on,and still don't recognize USB,Battery is Full,
Everything i try:
Remove a battery for 1 night
Charge a battery with Charger for battery
Put the charge cable into phone for 1 day
try comb. with keys ( volume up/volume down/Power but.,,volume Down and power but.)but nothing happens.More idaes ??? , or maybe never will wake up this phone ???
more information for the problem
htc hd2 1024 mb with Android gingerbread 2.3,haspl v.3,MAGLDR113
Sd card 2 GB (class 3)
while I play games and watching youyube via wifi connection my charge cable was plugged in the phone,in about a 2,3 hours it freeze,i wait 1,2 minutes and after i try to power off the phone I remove the battery and pul back again and in this moment the phone never turn on.That is maybe everything I know if someone knows or give me a idea what to do,please tell me
I've seen this and similar a few times, when left on charge overnight, and upon waking the phone is totally gone. I've woken up to a fully hard reset phone myself, once, not dead but something weird happened.
Electrical surge, perhaps? Overheated circuits? Who knows.
Somehow the phone start,I have put on my router,and plug in USB all night,in the morning i remove a battery,remove a SDcard put back batery,plug usb and it go,I replace infromation from the card with onother sdcard,flash the phone. 10x for the help,maybe now everything is ok
marto9067 said:
more information for the problem
htc hd2 1024 mb with Android gingerbread 2.3,haspl v.3,MAGLDR113
Sd card 2 GB (class 3)
while I play games and watching youyube via wifi connection my charge cable was plugged in the phone,in about a 2,3 hours it freeze,i wait 1,2 minutes and after i try to power off the phone I remove the battery and pul back again and in this moment the phone never turn on.That is maybe everything I know if someone knows or give me a idea what to do,please tell me
Click to expand...
Click to collapse
I've same problem after similar conditions.
Mine is 512Mb HD2 running Andorid on SD
- while using in extreme conditions: very low network signal, hot ambience temperature, using GPS and downloading data throug 3G
- the screen freeze on image and not respond on touch neiter button
-after 2-3 minutes phone temperature became very hot and screen again on freeze
- removed battery (for power off button not responding)
- insert battery
- no power up, no green LED with AV adaptet, no USB recognized
I'll trying to charge battery but i don't have a table battery chager.
Could you please repeat me what you did, since I didn't get the first part, what did you put on your router (what kind of router please)?
I've tried using my phone with another HD2 phone's battery which is working (and which also started with my own battery?!) but my own phone wouldn't start at all with the other battery...
The battery wasn't fully charged, but did it have to be, if so how long should I charge the battery with the cut USB cable for it to be charged enough please?!
TIA
P.S. I've tried a voltmeter on my battery and it said 4.14V (should it be 4V exactly?) and should I even try the cut USB charge trick again (since I've tried another phone's working battery)?
marto9067 said:
Somehow the phone start,I have put on my router,and plug in USB all night,in the morning i remove a battery,remove a SDcard put back batery,plug usb and it go,I replace infromation from the card with onother sdcard,flash the phone. 10x for the help,maybe now everything is ok
Click to expand...
Click to collapse
dada.81 said:
Could you please repeat me what you did, since I didn't get the first part, what did you put on your router (what kind of router please)?
I've tried using my phone with another HD2 phone's battery which is working (and which also started with my own battery?!) but my own phone wouldn't start at all with the other battery...
The battery wasn't fully charged, but did it have to be, if so how long should I charge the battery with the cut USB cable for it to be charged enough please?!
TIA
P.S. I've tried a voltmeter on my battery and it said 4.14V (should it be 4V exactly?) and should I even try the cut USB charge trick again (since I've tried another phone's working battery)?
Click to expand...
Click to collapse
Ok if I understand you correctly you have tried your battery in a working HD2 and it worked. Then you tried the battery from the working HD2 in your device but your device still did not boot up. If this is correct I do not feel your battery is the problem, but still check the battery pins on your device to make sure none of them are not slightly bent and not making contact properly.
Also if you can provide more info on what you may have done to cause this or what happened when your device reached the state it is currently in. This info can help others and me help you better.
I have a similar problem.
The phone won't start, it gets to the white htc screen sometimes but quits within a fraction of a second.
This has been so since the first Android boot hung (I suspect I have not followed the steps accurately enough...). I have charged, decharged and recharged the battery using the suggested USB-cable technique, but this was of no aid so far, so it's not the battery. Pins and all's fine.
It's someone else's phone, too, so it would be rather unfortunate if I bricked it.
Are there any other common reasons for this behavior? Most tutorials rely on a PC connection, but as it does not recognize such a thing, that's a bit of a problem.
Finally the same problem here.
Battery status was about 70% and running smoothly (WinMO Custom Rom) since installed.Unlocked the Screen and tried to start programs.
The Icons were lightened up but nothing happened.Tried to softrestart...Nothing happened.
Removed and reinserted the Battery.
=> Not turning on.
-another fully charged Battery => nothing
-charging on Charger => nothing not even charging light
-plugged into (running) pc => nothing not even charging light
-5 hours in the fridge => nothing
-charging over night => nothing
Any hints ?
Thx for the goot work around here and greets from Germany !
Sebastian
PS If anyone got one to offer => contact me. Dont like those situations
Bad news!
Seems like your MB is gone...:crying:
Maybe one chance left for a JTAG attempt to a local service shop...
thats what i was afraid of
at least it happend only one hour after i made a backup
thx for the reply !
Just got my nexus 4, and after it was left in cwm for about 10 minutes (while I was making breakfast) it went to a black screen and now just the red led notification led is flashing whenever plugged in, and on my mac in system profiler it shows "composite device", any suggestions?
Thanks!
nycbjr said:
Just got my nexus 4, and after it was left in cwm for about 10 minutes (while I was making breakfast) it went to a black screen and now just the red led notification led is flashing whenever plugged in, and on my mac in system profiler it shows "composite device", any suggestions?
Thanks!
Click to expand...
Click to collapse
Is your device hot to the touch?
Sent from my Nexus 4 using xda premium
20 second press on power button
No luck
Sent from my HTC One X using xda premium
Don't know if you want to do this, but you can open the phone and disconnect and reconnect the battery connector...
What was your battery level, I know in other devices some times the CPU(s) run at full speed in recovery allowing for quicker flashing this could discharge the battery rapidly. Also a flashing red LED when plugged in normally means the phone is charging but doesn't have enough charge to reliably turn on, leave it plugged in for about 15 minutes and try turning it on again.
Try holding down the VOL + and - keys along with the powerbutton (after turning it off by holding down the power button for an extended time) and see if you can get into fastboot. My friend's Nexus 4 kept bootlooping after he unlocked the bootloader but booted straight to CWM after, not letting it erase userdata first.
Net.silb said:
Don't know if you want to do this, but you can open the phone and disconnect and reconnect the battery connector...
Click to expand...
Click to collapse
I have no problem doing this, the phone seems easy to disassemble, looks alot like a overgrown iPhone 4, 2 screws on the bottom. I just hope its an easy slide, I don;t want to mar it in case I have to exchange it.
jakejm79 said:
What was your battery level, I know in other devices some times the CPU(s) run at full speed in recovery allowing for quicker flashing this could discharge the battery rapidly. Also a flashing red LED when plugged in normally means the phone is charging but doesn't have enough charge to reliably turn on, leave it plugged in for about 15 minutes and try turning it on again.
Click to expand...
Click to collapse
I thought this as well, its been plugged in for at least an hour now.
Oh and now I don't even get the red led!
good times..
I've got the exact same issue. Plugged it in last night to charge and this morning it wouldn't turn on. Plugged and unplugged it and the red LED starts flashing. After a minute or so I'm getting the battery charge animation on the screen - so the red LED is power related. Now to see if it actually charges up and boots.
Hi nycbjr. I have seen a similar issue posted here, but I can't find the thread at the moment, try searching. If I remember correctly then he got it working by holding power, volume keys and then plugging in the charger.
nycbjr said:
I have no problem doing this, the phone seems easy to disassemble, looks alot like a overgrown iPhone 4, 2 screws on the bottom. I just hope its an easy slide, I don;t want to mar it in case I have to exchange it.
I thought this as well, its been plugged in for at least an hour now.
Oh and now I don't even get the red led!
good times..
Click to expand...
Click to collapse
Try a different charger?
Unlucky
Get a Free £5 On a GiffGaff sim
Called google, they are sending me another one advanced replacement, so I can send the bad one back at me leisure.
Good customer service!
Qhsusb_dload
nycbjr said:
Called google, they are sending me another one advanced replacement, so I can send the bad one back at me leisure.
Good customer service!
Click to expand...
Click to collapse
Hi!! I have the exact same problem, unfortunately the phone is bricked! Does anyone know how to fix this? I saw a video on youtube Nexus 4 - JTAG Brick Repair Service
CalogeroIndorato said:
Hi!! I have the exact same problem, unfortunately the phone is bricked! Does anyone know how to fix this? I saw a video on youtube Nexus 4 - JTAG Brick Repair Service
Click to expand...
Click to collapse
If u are fully bricked JTAG is the way to go.
Sent from my Nexus 4 using Xparent BlueTapatalk 2
Here seems to be a similar thread, maybe you'll find help there.
http://forum.xda-developers.com/showthread.php?t=2111947
Hi,
Here's the situation:
I had my N4 connected to my PC (doing some development), the cpu usage (on the phone) shot up to 100%, then the phone went off.
Now it won't turn on, won't charge, won't respond to V+/V-/Power, won't show up as any device when I connect it to my PC, nothing!
What are my options here? Is it dead?
And I'm no longer under warranty
Thanks
trennonix said:
Hi,
Here's the situation:
I had my N4 connected to my PC (doing some development), the cpu usage (on the phone) shot up to 100%, then the phone went off.
Now it won't turn on, won't charge, won't respond to V+/V-/Power, won't show up as any device when I connect it to my PC, nothing!
What are my options here? Is it dead?
And I'm no longer under warranty
Thanks
Click to expand...
Click to collapse
You just registered to ask this?
For how long did you try to let it charge? What development (app or OS)?
Sent from my N4, wanna know what I am doing? Check http://team-fun.eu
Let it charge overnight. OS 4.3, standard java development (with Eclipse)
Maybe battery dies... try to open the back case and see if the battery inflated [if yes - buy a replacement battery] or not, also disconnect the battery's flex cable and reconnect again, tell if it works...
PsyOr said:
Maybe battery dies... try to open the back case and see if the battery inflated [if yes - buy a replacement battery] or not, also disconnect the battery's flex cable and reconnect again, tell if it works...
Click to expand...
Click to collapse
The battery is fine.
Disconnect/Reconnect did the trick!
Thanks!!
weird issue.. good to know about the battery disconnect/connect trick...
Sent from my Nexus 4 using XDA Premium 4 mobile app
Hello.
When I try to turn on my N4, I hold power button, and after about 10 seconds Red light blinks (just once, if it's connected to USB that 1 blink last for 3 seconds, if connected to wall, it's just quick 1 blink. If it not connected anywhere there is no action at all, it just stays dead, no blinks, nothing). Same if I try to go in bootloader by holding volume down+power.
This happened after I successfully installed CM12, with no errors. Then I rebooted my phone, and it just stayed black as it is now. Battery was around 25~30% that time, and phone was connected to USB.
Did I bricked my phone totally? I am now trying to charge it up already for 1 hour... but it nothing changes.
I have searched here for similar problems, but couldn't find solution...
Edit: Charging already for 10h+ , still same..
Edit2: I removed battery, reconnected after a while, still same problem.
So I tested it with multimeter, it says 2.6V, but fully charged must be 3.8V. Could this be a problem? I was charging it for whole night.
Edit3: I just got new battery . But it looks the same.. phone doesn't boot up.. same red light blinks once.. so.. its my phone is dead? I can't believe that...
When I connect to PC usb, there are unrecognized deviced called "QHSUSB_DLOAD".
easy fix
Hold down the power button and the volume down button at the same time until phone reboots. If you see the little android no need to worry just let go and wait for your device to reboot on its own. This is not a factory reset it's just like restarting your device. :good:
zelexon said:
Hold down the power button and the volume down button at the same time until phone reboots. If you see the little android no need to worry just let go and wait for your device to reboot on its own. This is not a factory reset it's just like restarting your device. :good:
Click to expand...
Click to collapse
I have tried that many times. Nothing. It's bootloader screen, but I can't get there. Nothing happens. If I keep holding volume down+power it just keep blinking once every ~10 seconds, same if I hold just power button. If phone is not connected to charger, there are no blinks at all.
I removed battery, reconnected after a while, still same problem.
So I tested it with multimeter, it says 2.6V, but fully charged must be 3.8V. Could this be a problem? I was charging it for whole night.
Cracken6 said:
I removed battery, reconnected after a while, still same problem.
So I tested it with multimeter, it says 2.6V, but fully charged must be 3.8V. Could this be a problem? I was charging it for whole night.
Click to expand...
Click to collapse
I had the same problem a year ago, I tried to remove the battery, charging all night, and other solutions that I found online and no one worked.
Finally I found here in XDA a user with the same problem and his solution was charger the phone with a wireless charger, a friend of mine has one and I put the phone to charge and after a few minutes the screen goes on and the phone was charged, then I press power button and the nexus run again.
Hope this works.
Sorry for my bad English, I'm from Spain.
Good luck.
(I bought a wireless charger in case it happen again)
I don't know anyone with wireless charger. I already ordered a new battery, and then I probably will get wireless charger also. Ty.
But this problem is very weird if you think so.. I think it happened because of many aspects together:
1) Battery was already below 30%
2) I pretty regularly charge phone with USB (won't do it again)
3) It was connected to PC USB in same time.
4) I installed CM12 ROM in same time
So main reason I think is USB, that I restarted phone while it was on pretty low battery and with USB connected.. phone restarted and got invalid voltages and couldn't even boot up or charge phone. I also found an article which says, minimum voltage, when phone battery has 0%, it's 3.0V, so I was below that.. it just screwed everything and battery died. Well, I am not sure for 100% that it's battery fault, but I hope so, I really love my N4 and still wanna use it for long time, I hope it's not dead phone, just a dead battery. Lets see! I will update this thread , when I get my new battery (less than month probably).
Sorry, my english is also not perfect. I am from Latvia.
I was playing when it happened to me. The phone was very very hot and the battery was around 70%. When I put in the wireless charged and I can reboot the phone the battery was at 65%, so it had charge but the phone won't boot.
I charge my phone almost every day, sometimes with AC, others with USB (plugging to PC) or wireless that depends of my needs
I hope you can fix it. Good luck.
Btw. Do you know if battery charges with wireless charger, if it's removed from the phone?
Don't think it does, since the receiving coils for wireless charging are located just behind the glass back.
Flipz77 said:
Don't think it does, since the receiving coils for wireless charging are located just behind the glass back.
Click to expand...
Click to collapse
The battery will charge with a NCF Charger
Major Issue Google
This "Nexus SOD" issue is showing up on many sites across the Internet. I have multiple "Nexus" devices including 2 Nexus 4, 1 Nexus 5, 2 "Nexus 7 2013". It suddenly started out of the blue with one of my Nexus 4 phones. Symptoms included rapid battery discharge. I am using Lollipop 5.1 on all devices. There are many claims as to the cause, Hardware Motherboard, Power Button etc. Others claim it is "Software Related" or App Related. The problem effects Nexus 4 and Nexus 5 phones. I have ordered a new motherboard for my nexus 4 device and see if that makes a difference.
This problem should warrant a "Major Android Lollipop Crisis Team" by Google to investigate the cause and let us know what it is and what Google is doing to solve the problem before moving to announce "Android M". This issue needs to brought up and actively pursued at the upcoming "Google I/O Conference" by the strong Android Developers Groups to press for "Formal Action"
charging method
Cracken6 said:
I have tried that many times. Nothing. It's bootloader screen, but I can't get there. Nothing happens. If I keep holding volume down+power it just keep blinking once every ~10 seconds, same if I hold just power button. If phone is not connected to charger, there are no blinks at all.
Click to expand...
Click to collapse
I had this problem a long time ago and my fix worked for me after doing a little research it seems like this is a case called battery total discharge. The fix was simply to charge your phone using the wall adapter that came with your phone (I still use my old apple cube wall thing) and to wait for the red light to appear then wait about ten minutes before trying to reboot.
I just got new battery . But it looks the same.. phone doesn't boot up.. same red light blinks once.. so.. its my phone is dead? I can't believe that...
When I connect to PC usb, there are unrecognized deviced called "QHSUSB_DLOAD".
Maybe this video will help you: Oh I´m not allowed to post links until now.
Just search for: - Nexus 4 "red light of death" fix - at youtube.
Hope it will help
AndRe5575 said:
Maybe this video will help you: Oh I´m not allowed to post links until now.
Just search for: - Nexus 4 "red light of death" fix - at youtube.
Hope it will help
Click to expand...
Click to collapse
I have checked all kind of videos there. Also that one. Most of these cases are related to battery, but it seems in my case it isn't. I just searched for QHSUSB_DLOAD unrecognized device, all posts says it means phone is bricked... But cmon, how? I installed CM12, successfully, without any errors, then just restarted phone, and its dead...
Cracken6 said:
I have checked all kind of videos there. Also that one. Most of these cases are related to battery, but it seems in my case it isn't. I just searched for QHSUSB_DLOAD unrecognized device, all posts says it means phone is bricked... But cmon, how? I installed CM12, successfully, without any errors, then just restarted phone, and its dead...
Click to expand...
Click to collapse
Did u try booting the phone without battery by connecting to wall charger and what about flashing stock ROM via PC
Also check that the power button works
This case should be solved
as9333 said:
Did u try booting the phone without battery by connecting to wall charger and what about flashing stock ROM via PC
Also check that the power button works
This case should be solved
Click to expand...
Click to collapse
Just tried booting without battery, and connecting to wall. Same - red light blinks once, after I hold Power button or Power+Volume down for about 15 seconds. If I keep buttons pressed, it just repeats every ~15 seconds.
Power buttons works fine.
After I checked that Device manager thing in google.. it looks very bad.. phone is dead.. probably need to change motherboard. I am just shocked, how this could happen... I didn't receive any errors during CM12 installation. Phone just instantly died after restart.