I followed the guides rooted my phone,I followed the instructions word for word installed superstrap, and loaded jeally beans on there. Now all my phone does it constantly restart, every app on there will crash very very quickly, I can't make calls without a reboot, and I can get anywhere from 30seconds to 30 minutes of usage and then a reboot.
I tried clearing the cash and the dalvik cache as well as fixing permissions, from within safestrap. none of those things worked. I also tried searching but I couldn't find anything relevent. Did I miss something? what can I do to fix this, because when this rom works I really like it.
EDIT: Forgot to mention this is a Verizon phone
What rom did u flash???
Sent from my SM-N900V using XDA Premium 4 mobile app
woops, [Rom][4.3][MJE] Jelly 'Beans' - Build 6 [01/01/14] AOSP/KitKat Themed || Game Changing
do a clean reflash?
JustusIV said:
do a clean reflash?
Click to expand...
Click to collapse
also were you on MJE before you tried to flash this?
yes and yes
ok, I have noticed that if I boot into the Jelly Beans Rom and I connect my phone to the Kingo andriod root app it says that I'm not rooted (I can't get the phone to not crash long enough for me to check with the root checker app), but when I restart with the phone and load the stock rooted rom everything checks out with Kingo and the root checker app.
Also if I switch from one the jelly beans rom to the stock rom the phone will continually crash/reboot as well. it will only stop if I boot to the stock rom after leaving the phone off for a couple of hours. Any suggestions?
Related
Has anyone tried the 4.3 cm10.2 ROMs found over here (http://androidhosting.org/Devs/Dhacker29/cm-10.2/)? I was going to give it a go last night but for some reason my device got stuck on the "warning your boot loader is unlocked" screen and had to use Matt's utility to give it life... I may give it a try tonight when I'm not expecting any calls...
Sent from my XT907 using xda app-developers app
Yeah, I'm running the latest version of it now. I had the same problem. What worked for me was the following:
1. Wipe everything - system, data and both types of cache.
2. Install CM 10.2 and NOTHING else. Boot the ROM. It should go through now.
3. Once you get to the main screen, reboot into recovery.
4. Install the 4.3 GAPPS version. Reboot, get to the main screen and reboot into recovery.
5. Now flash the 4.3 version of Supersu for CM 10.2
6. Boot one last time into CM 10.2
All the links for everything you need can be found with a Google search. Later I may edit this post to include those links.
Sent from my XT907 using Tapatalk 4
Thank you kindly for the reply... I got it booting finally but couldn't get su permission on TiB and what not... I didn't know about needing the 4.3 su ...I'll flash that now... again thank you kindly
Sent from my XT907 using xda app-developers app
TWRP isn't supported either from what I understand. You need to run CWM.
Any time I install 4.3, it won't reboot. It starts up initially, but I can't get it to get past the Motorola logo upon second boot.
I have tried the normal install method and this method.
Then recovery doesn't see the /data folder so something is wrong with the 4.3 install I presume.
Does it change the location of data?
Yeah I Tried It But It Had No Sound So I Changed Over To 4.2.2 AOKP.
grtechguy said:
TWRP isn't supported either from what I understand. You need to run CWM.
Click to expand...
Click to collapse
I was using CWM on my first attempt... this time around I switched to TWRP...
Sent from my XT907 using xda app-developers app
grtechguy said:
TWRP isn't supported either from what I understand. You need to run CWM.
Click to expand...
Click to collapse
I use TWRP, works ok. Got sound, data, everything working fine. Battery life sucks, but no surprise there.
My 2c
I'm running it right now. I must have missed the part about flashing SuperSu, because I can't do anything as root. I had trouble the first time I flashed with the phone bootlooping, but I flashed again and that fixed it. Battery life is somewhat poor, but I just found the performance page today (Icon was different, silly me!) so we'll see how it goes with a different governor. I've been having issues with Navigation and Bluetooth audio on anything except stock. Bluetooth audio locks the phone and I have to soft-reset it. Navigation crashes if you try to multi-task while using it.
I am running CM 10.2 by Skrilax - http://skrilax.droid-developers.org/cm10.2nightly/razrqcom/index.php?device=xt907 (Might be fine with the DHacker version also, but this is what I used.
Pretty much everything seems to work including GPS. I do not have Bluetooth anything so I can't speak to that. Some (maybe most) people seem to have difficulty getting it installed, but it can be done. There are a few tricks to it. Here's what worked for me:
I highly recommend using TWRP 2.6.0 as that's what I use and I know it works. Not sure whether other recoveries will function the same or not.
What you need:
1. The most recent version of CM 10.2 from the link above.
2. Gapps Core 4.3 - http://goo.im/devs/BaNkS/GApps 4.3
3. Root for 4.3 - http://download.chainfire.eu/342/SuperSU/UPDATE-SuperSU-v1.43.zip
1. Erase everything except the external sdcard. Do it three times. (Don't ask, just do it.)
2. Also Format Data - what the heck, do that 3 times too.
3. Install the CM 10.2 ROM, wipe dalvik and cache again and reboot into the system. DO NOT install anything else at this time for best results.
4. Let the OS boot all the way to the desktop.
5. Unlock the developer options by going into Settings\About Phone and tapping 8 times on Build number. (Only needs done one time, updates do not hide it again.)
6. In Developer options, change Root Access to "Apps and ADB". (Go ahead and set up whatever else you want in Settings.Do not install any apps or updates at this time.)
7. Reboot into Recovery. Install Gapps Core 4.3
8. Clear dalvik and cache and reboot into System. If it hangs on the Motorola logo, get back into Recovery and format data again. (This is why I said don't install apps or updates yet.)
9. Once the phone boots all the way, reboot into Recovery again and install Root using Supersu 1.43.
10. Clear dalvik and cache and reboot into System. If it hangs on the Motorola logo, get back into Recovery and format data again. (This is why I said don't install apps or updates yet.)
11. Once System has booted, you can update SuperSu in the Google Play Store. The first time you open it, it will want to update the binary. It's very important that you choose the option to do it from Recovery. Your phone will reboot into Recovery, update the binary and then boot back into System.
12. Once all this is done, so are you. Restore your apps, allow Google Play to do any updates, and customize the layout to your tastes.
Note: Once you get a successfully installed 10.2 setup, you can dirty flash the nightlies. Always clear dalvik and cache. And always backup your apps before flashing anything if you want to make your life easier.
ENJOY!!!
Going to give it a go with CWM I'll let you know how it goes.
Well I got the rom to work but I could not get it to boot after loading gapps. I tried wiping data but no joy!
Hey, Thanks for the very clear update instructions - I'm now on CM 10.2!
I am not able to successfully root though. SuperSU complains:
"There is no SU binary installed and SuperSU cannot install it. This is a problem!
If you just upgraded to Android 4.3, you need to manualyl re-root - consult the relevant forums for your device!"
I have tried to reflash the SuperSU zip posted here multiple times to no avail...
Thoughts?
EDIT: Solved with http://download.chainfire.eu/345/SuperSU/UPDATE-SuperSU-v1.51.zip
Flashed TWRP and I was able to get it up and running having the same issue with root going to try the file above and I'll update again.
edit
*** the supersu 1.51 file worked for me as well. ***
---------- Post added at 04:43 PM ---------- Previous post was at 03:47 PM ----------
I'm still having issues. I got the root to work but everytime I reboot the device I have wipe data or it hangs on the boot logo.
---------- Post added at 05:02 PM ---------- Previous post was at 04:43 PM ----------
Restored back to carbon rom 1.8. I may try again after a few more dailies are out. As this is my primary device I can not have the issues I saw. Admittedly it may be something that I did wrong and not the rom.
Sent from my XT907 using xda premium
Got this up and running last night and no issues so far for me. I'm wondering though if any custom kernels work with 10.2? I was curious about the vanquishpuppiesn12 kernel.
kensdavid said:
Hey, Thanks for the very clear update instructions - I'm now on CM 10.2!
I am not able to successfully root though. SuperSU complains:
"There is no SU binary installed and SuperSU cannot install it. This is a problem!
If you just upgraded to Android 4.3, you need to manualyl re-root - consult the relevant forums for your device!"
I have tried to reflash the SuperSU zip posted here multiple times to no avail...
Thoughts?
EDIT: Solved with http://download.chainfire.eu/345/SuperSU/UPDATE-SuperSU-v1.51.zip
Click to expand...
Click to collapse
You must not have followed every step exactly. The process I outlined works flawlessly if it is followed exactly. I'm glad you were able to resolve it though. You ended up with the same result and that's what matters!
Sent from my XT907 using Tapatalk 4
Thanks for sharing , make a mark
netizenmt said:
You must not have followed every step exactly. The process I outlined works flawlessly if it is followed exactly. I'm glad you were able to resolve it though. You ended up with the same result and that's what matters!
Sent from my XT907 using Tapatalk 4
Click to expand...
Click to collapse
can you confirm if rear mic is working when taking videos? this has been the only hangup for me on the 4.2.2 ROMs...
I doubt it, since that functionality is probably kernel related, but still just curious...
thanks!
Ok I noticed that I had somehow installed the wrong TWRP I installed 2.6.0 today and I have so far had good luck phone is up and running and seems to be stable. At first I had some issues with a few apps throwing errors during the mass install when I sync'ed with Google but a manual download after and they installed just fine. Also the new camera app called focal has some issues for me it opened and took pics but images in gallery are blank. However the stock camera app seems to working fine at least for stills I have not tried video yet.
I've got this all working too, including root. But I've been noticing about a second delay when pressing power to unlock the phone. Sometimes it delays so long that I press power again. So when the phone does wake up, the screen goes off again from my double press of impatience. I'm running the 0907 nighlty
Sent from my XT907 using XDA Premium 4 mobile app
FWIW, never needed to wipe data multiple times and I flashed everything at once. That said, still a good procedure to follow
Also, @georgeascott, that's a known bug. It tends to SOD on occasion... Not much to do to fix except maybe overclocking
Sent from my XT907 using Tapatalk 4
Any plans for safe strap support? My bootloader is apparently permanently locked. Stock isn't terrible.. You can disable and hide bloatware.. But it would be really nice to have pie instead of soft buttons and restart and screen shot on the power menu
Sent from my XT907 using xda app-developers app
zombolt said:
Any plans for safe strap support? My bootloader is apparently permanently locked. Stock isn't terrible.. You can disable and hide bloatware.. But it would be really nice to have pie instead of soft buttons and restart and screen shot on the power menu
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
Probably not, but you can get some of that functionality with root alone if you know how to mod systemui and stuff like that. Probably not the answer you're looking for but that's probably what it is...
Can always hope someone will Dev for it though
Sent from my XT907 using Tapatalk 4
sloosecannon said:
Probably not, but you can get some of that functionality with root alone if you know how to mod systemui and stuff like that. Probably not the answer you're looking for but that's probably what it is...
Can always hope someone will Dev for it though
Sent from my XT907 using Tapatalk 4
Click to expand...
Click to collapse
I have no clue how to do those things. I got really spoiled on the dinc. So many people spoon feeding contributions to a fabulous device. It sure is a shame it's impossible to unlock my boot loader
Sent from my XT907 using xda app-developers app
everything I've run into *works*
but it all doesn't work so smoothly
Scrolling and everything is kind of choppy, I mean it is definitely livable, but still choppy.
netizenmt,
Thx a lot for your help. I`m now on cm10.2, too.
But there seemed to be some bugs.
1.I cannot install any apps from Google Play Store, or it hangs on the MOTO logo after reboot.
2.I can take calls, but cannot reach the 3G network.
P.S.When I try to use QPST to configure the phone, the QPST tells Serious error encountered, write to phone aborted.
I've installed CM10.2 two weeks ago and everything is working great! The first time I flashed it I got stuck at the CM boot animation... After ten minutes spent watching it I forced it to reboot: stuck again. At this point I booted back to recovery, followed thoroughly netizenmt instructions (wipe three times, really!!!), installed CM10.2, Installed gapps, installed supersu v1.43 and so on (follow all the steps netizenmt told us!)... Everithing worked fine then. At this point I changed build.props to make the phone works in GSM mode.
fargles said:
everything I've run into *works*
but it all doesn't work so smoothly
Scrolling and everything is kind of choppy, I mean it is definitely livable, but still choppy.
Click to expand...
Click to collapse
If you go to settings/developer options and scroll down to HW overlays. Check the box to disable HW overlays. That should help with the tearing/chopping.
Also, maps FC all over the place as soon as you're using GPS.
Sent from my XT907 using xda app-developers app
I downloaded the official OTA update. When I went to install it the phone needed to reboot and now I've been stuck looking at the Green Android screen saying Downloading... Do not turn off target!!! and in very small writing could not do normal boot, Odin mode. I am rooted. Please help
What version is the phone? I'm reading up on things in preparation of updating myself. I'm on MF3 and for what I've read I need to Odin back to stock before updating since I'm rooted. This may not be your case figured I'd toss it out there.
brought to you by my not so sexy GS4 MF3
padgaland said:
I downloaded the official OTA update. When I went to install it the phone needed to reboot and now I've been stuck looking at the Green Android screen saying Downloading... Do not turn off target!!! and in very small writing could not do normal boot, Odin mode. I am rooted. Please help
Click to expand...
Click to collapse
Same with me. I'm stuck at the emergency firmware recovery screen. My phone was at 4.2 and it did the OTA to 4.3.3 and froze. What do I need to do to go back to stock rom?
SGH-I337 16GB.
schreiber37 said:
Same with me. I'm stuck at the emergency firmware recovery screen. My phone was at 4.2 and it did the OTA to 4.3.3 and froze. What do I need to do to go back to stock rom?
SGH-I337 16GB.
Click to expand...
Click to collapse
You i think you should use Kies to go back they actually have a feature for that. Mine won't even be recognized by the computer or anything.
I am rooted and I was running 4.3 GoldenEye v 11 rom BTW awesome ROM and Dev support best I've ever seen on xda. Any way today I installed my nandroid back up of stock ROM 4.2 Att gs4 sgh 1337 let it boot up any settle in 10 min..when I looked at phone I saw the Att redwhite arrows in task bar I quick shut down WiFi and now under settings status it says update continue or something .now my back up is mdb never ota before. so is this update mf3 the one u that is bootlocked or is it the 4.3 update?? I read some were Att was to start with 4.3 update yesterday what u guys think I should do? Thanks in advance ..
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Ok I am going to try to go back to stock by using a firmware DL and Odin v3.07 If it works I will tell everyone. If not I may be screwed.
I'm currently on MF3 and had rooted my device previously and would like to upgrade to the new OTA. Would someone be so kind to link me to ODIN and the stock file,so I may return to stock and apply the OTA.
Thank you,
Did anyone go to recovery and factory reset?
Sent from my Nexus 7 using Tapatalk 4
Andrew149 said:
Did anyone go to recovery and factory reset?
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
I'd recommend it but it's to late for me.
This worked for me to unroot.
To unroot, try this. It worked for me. I'm back to "official". However, I've downloaded 4.3 like 5 times already. I can download 100%, but when it reboots to install it stops at 30% then says update failed.
http://forum.xda-developers.com/showthread.php?p=45301834
Ditto
silrosriv said:
To unroot, try this. It worked for me. I'm back to "official". However, I've downloaded 4.3 like 5 times already. I can download 100%, but when it reboots to install it stops at 30% then says update failed.
http://forum.xda-developers.com/showthread.php?p=45301834
Click to expand...
Click to collapse
Same exact problem!
wading through threads for answer!
Ok I have my phone working again. I am not on 4.3 but its back to where it was before I started, which is better than nothing. After running Odin once and it failing like it always does (I have never seen it work) I was able to get the holding down volume, home and power button option to work and I just said no and to reboot and it worked. I then went into SuperSU app and unrooted. I will try to update to 4.3 at a later time. I am glad I wasn't the only one having issues. I usually pride myself on knowing technology and being able to figure it out.
silrosriv said:
To unroot, try this. It worked for me. I'm back to "official". However, I've downloaded 4.3 like 5 times already. I can download 100%, but when it reboots to install it stops at 30% then says update failed.
http://forum.xda-developers.com/showthread.php?p=45301834
Click to expand...
Click to collapse
I had the same problem. The only way I was finally able to upgrade to 4.3 was to use Odin to revert to stock (unrooted) 4.2.2 MF3 using the files on this thread: http://forum.xda-developers.com/showthread.php?t=2502003 Once I did that I ran the OTA update to 4.3 and it worked without any problems.
So if I oden to stock again don't root Then hit the update it should go? Weird thing is I installed my back up today and it a stock backup fresh rich from a oden wipe and it stared DL on its own before I stopped it with killing WiFi. I s this 4.3 update or is it mf3 since I never did that update. ..help. Thanks
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
tried that..didnt work
padgaland said:
Ok I have my phone working again. I am not on 4.3 but its back to where it was before I started, which is better than nothing. After running Odin once and it failing like it always does (I have never seen it work) I was able to get the holding down volume, home and power button option to work and I just said no and to reboot and it worked. I then went into SuperSU app and unrooted. I will try to update to 4.3 at a later time. I am glad I wasn't the only one having issues. I usually pride myself on knowing technology and being able to figure it out.
Click to expand...
Click to collapse
Tried unrooting through SuperSU and managed to still be rooted after reboot, and OTA 4.3 still didnt work
SIGH
Read that u have to oden to stock dint root and the try ota they say this worked gunna oden back to stock and try..
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
thanks
ralphie1267 said:
Read that u have to oden to stock dint root and the try ota they say this worked gunna oden back to stock and try..
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
could you point me in the right direction for that procedure? Im trying to do it on my mac using hiemdall but I think im about to go try odin on a PC.
MasterShakeMan said:
Tried unrooting through SuperSU and managed to still be rooted after reboot, and OTA 4.3 still didnt work
SIGH
Click to expand...
Click to collapse
Take it to Best Buy. "Kies broke your phone" *wink*wink* and they can flash it back to stock without messing up your data. You can do it yourself. Plus they have this mysterious awesome SMART tool. Lol
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
MasterShakeMan said:
could you point me in the right direction for that procedure? Im trying to do it on my mac using hiemdall but I think im about to go try odin on a PC.
Click to expand...
Click to collapse
Use the link in my previous post (post #13). That has the files and procedures for using Odin to get back to stock 4.2.2 and then you can do the OTA upgrade from there.
Hello Gents,
Have had my S4 for about a year now and its been awesome (still on MK2, stopped it from updating). It is rooted and safestrap has been installed. I didn't get around to installing a custom ROM though so im still on stock ROM. Been noticing some random issues today and cant pinpoint why. First I am unable to turn on WIFI, was able to yesterday but now it just stays grey. I randomly lose my data connection (well it has a circle with a line through it) and it randomly just pops back on to 4g. I was playing on the phone one time and no SIM error came up but then went away. Power saving mode turned itself on randomly when i have over half battery. Lots of random things happening...
Now i did lose some data and have been trying to recover it this past week using this thread http://forum.xda-developers.com/gal...e-internal-memory-data-recovery-yes-t1994705/
I didn't make it far though because when i try to launch ADB Shell it gives me a permission error.
So that is another thing on the list, it is no longer prompting me to give root access to things. I also noticed that when i power on the phone, it no longer shows Samsung with a lock like it did ever since i rooted it. It now shows Samsung Galaxy S4...I Guess i may have lost root? I downloaded root checker and it says i still have it. Anyway its just so confusing, is it time to blow everything out and go back to stock MK2 and start over? What do you guys think? Thanks!
If you don't mind, I'd say Odin to stock would be your first troubleshooting step.
Don't forget, internal SD gets erased when you Odin to stock.
Sent from my SGH-I337 using XDA Premium 4 mobile app
guut13 said:
If you don't mind, I'd say Odin to stock would be your first troubleshooting step.
Don't forget, internal SD gets erased when you Odin to stock.
Sent from my SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Think so huh? I was thinking so...and yeah i know it erases internal memory, ill pull everything off before that and titanium backup apps and blah blah..
What i'd like to know is does Odin to stock blow EVERYTHING out including root and safe strap to where i would have to do that all over again? and i assume there is an Odin to stock for MK2? because i do not want the new update...
jermo said:
Think so huh? I was thinking so...and yeah i know it erases internal memory, ill pull everything off before that and titanium backup apps and blah blah..
What i'd like to know is does Odin to stock blow EVERYTHING out including root and safe strap to where i would have to do that all over again? and i assume there is an Odin to stock for MK2? because i do not want the new update...
Click to expand...
Click to collapse
I think Odin to stock is easier than troubleshooting every issue that you are having. Especially considering you already tried fixing one of them.
Yes. Odin wipes the slate clean. You'd have to root and install safestrap again. In case you don't have it.
mk2 odin... http://forum.xda-developers.com/showthread.php?t=2621279
root for mk2... http://forum.xda-developers.com/showthread.php?t=2565758
guut13 said:
I think Odin to stock is easier than troubleshooting every issue that you are having. Especially considering you already tried fixing one of them.
Yes. Odin wipes the slate clean. You'd have to root and install safestrap again. In case you don't have it.
mk2 odin... http://forum.xda-developers.com/showthread.php?t=2621279
root for mk2... http://forum.xda-developers.com/showthread.php?t=2565758
Click to expand...
Click to collapse
thanks brother! running through the long ridiculous process now
I see you have started the process... But wouldn't doing a FDR first be a simpler first effort? You would still have to restore root and data and apps, but it would be a bit easier and probably fix the problem. Just a thought. Hope all worked out!
I am on OTA NC4. I used to flash all the time from the Droid 2 to the note 2. Many phones. With that,I am stuck. I downloaded busy box and installed with the app as well as with SS. I restart into SS and wipe factory then go to install and flash a Rom. It gets to 50% pretty quick, says successful after about 2 minutes. I reboot, get Samsung splash screen and all goes black. I even let it sit all night and nothing. Any help or advice would be greatly appreciated.
Sent from my SM-N900V using XDA Free mobile app
OrangeAndBlueDroid said:
I am on OTA NC4. I used to flash all the time from the Droid 2 to the note 2. Many phones. With that,I am stuck. I downloaded busy box and installed with the app as well as with SS. I restart into SS and wipe factory then go to install and flash a Rom. It gets to 50% pretty quick, says successful after about 2 minutes. I reboot, get Samsung splash screen and all goes black. I even let it sit all night and nothing. Any help or advice would be greatly appreciated.
Sent from my SM-N900V using XDA Free mobile app
Click to expand...
Click to collapse
You need to flash the NC2 kernel to run a kitkat rom. The file and instructions can be found here. You can simply substitute the rom you are trying to install instead of the one in the OP. Just make sure it is based on NC2 or NC4.
Currently the only rom that doesn't require the NC2 kernel is the newest Jasmine Rom.
Good luck.