Related
Rooting my Galaxy S4 has been one of the biggest pains in my rear ever and now I'm bricked and need a bit of help.
Normally, when I want to root a phone, I come here, to XDA, and follow a nice well written up-to-date thread on how to do it and it works. For the S4 however, I can't find any such threads that are not either old, out-of-date, or they use so many abbreviations for things I have no clue what they are talking about.
I started out with a totally stock Samsung Galaxy S4, was a VPUAMDL.
I used ODIN to push TWRP tarball. I then used TWRP to install the CWM SuperSU zip file.
I noticed when it started up that I had no root, I had the SuperSU program however, it nor another program I got on the marketplace, could confirm root.
Bit of looking I found this: galaxys4root (DOT) com/galaxy-s4-root/sprint-vpuamdl-firmware-update-root-fix/
(sorry, can't post full links yet)
Which basically informed me that VPUAMDL needs a new kernel to remove the SetUID restrictions.
I downloaded that file, and put it on my SD card. Booted into TWRP and installed. now my phone is bricked. gets to the "Samsung Galaxy S4" startup splash screen on black background
I am looking for a kernel that will work, either the stock kernel or not.
I am also looking for a good tut on rooting the S4, as all the tuts I have used have been utter wasted time.
I have ODIN, and can boot TWRP, ODIN mode, etc on my phone.
have no clue where to go from here and Im afraid to start trying to download random files and get everything mixed and confused.
Thanks for any help at all.
CF Auto Root
http://forum.xda-developers.com/showthread.php?t=2291827
Sent from my SPH-L720 using xda app-developers app
FanOfSkynyrd said:
CF Auto Root
http://forum.xda-developers.com/showthread.php?t=2291827
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
I followed that page, pushed it, installed fine, 100% no errors.
still bricked at GS4 startup splashscreen.
It did finish successfully and I saw the screen with the red android.
It removed TWRP and replaced it with the stock recovery as it should have.
I am actually surprised myself that it is still bricked at the GS4 splash.
Odin stock everything. See if it boots. Then try to root after that.
Stealyourface said:
Odin stock everything. See if it boots. Then try to root after that.
Click to expand...
Click to collapse
I am failing to find stock everything to push.
I think I stated that, not sure... hmm
none the less. I do not have a stock kernel or recovery on hand. I can not find one either as there seem to be a plethora of kernels and threads and pages all for different files and downloads. Sifting through trying to find something is becoming harsh. Thus this thread.
You are not bricked if your phone can turn on and go to download mode or recovery.
Sent from my Sprint Galaxy S4 using Tapatalk 2
GiantJay said:
You are not bricked if your phone can turn on and go to download mode or recovery.
Sent from my Sprint Galaxy S4 using Tapatalk 2
Click to expand...
Click to collapse
Well then its whatever you want to call it when it wont boot the operating system and is totally un-usable as a phone or mobile device.
I would go HERE
That is the thread for stock MDL stuff.
Download and flash the kernel and full wipe rom for MDL.
Then upgrade to MF9.
+2 ^^^^ to what he said :edit:
Nice tut on rooting the s4 thanks to mudavo here http://forum.xda-developers.com/sho...to Full Stock [MF9] w/ Root & Custom Recovery
There is also a video tutorial stickied in android devolpment
Sent from myself SPH-L720 using xda app-developers
Thanks guys, going to try some of the stuff from there. Hope i get it going. Need mah phone back! lol
Wooo, those links where just what I needed. Thanks a lot.
Got my phone back on and now I have a stock file in case I muck things up again.
Just make a nand back up and restore when something bad happens ive mucked up alot and it has always saved me
Sent from my SPH-L720 using xda app-developers app while smoking
Hello developers.
I'm trying to reroot my phone after the latest 4.3 update via ODIN for my Indian handset.
I'm trying using CF-AutoRoot via ODIN and the it says PASS and the phone restarts normally as it should but the root is simply not happening.
there were 2 android 4.3 updates for my device and i installed the latest (you can see the post title for the exact version)
after everything completed properly i simply tried CF-AutoRoot via ODIN and nothing is happening.
Till 4.2.2, it got rooted properly without such or any other problems.
Kindly assist me out in getting my phone rooted.
Regards.
Here too
avineshwar said:
Hello developers.
I'm trying to reroot my phone after the latest 4.3 update via ODIN for my Indian handset.
I'm trying using CF-AutoRoot via ODIN and the it says PASS and the phone restarts normally as it should but the root is simply not happening.
there were 2 android 4.3 updates for my device and i installed the latest (you can see the post title for the exact version)
after everything completed properly i simply tried CF-AutoRoot via ODIN and nothing is happening.
Till 4.2.2, it got rooted properly without such or any other problems.
Kindly assist me out in getting my phone rooted.
Regards.
Click to expand...
Click to collapse
Yep, I can´t re-root it again it seems the CF-Auto-Root-ja3g-ja3gxx-gti9500.tar its not working for the i9500XXUEMJ8 versión, well time to wait to an updated CF-Auto Root :crying::crying::crying:
I9500XXUEMJ5 root working (almost working)... i cant run some app, without root all apps working great ;/
Weird. I rooted using CF Auto Root after flashing 4.3 MJ8, it always worked! I never did OTA update though, always used Odin and full wipe.
avineshwar said:
Hello developers.
I'm trying to reroot my phone after the latest 4.3 update via ODIN for my Indian handset.
I'm trying using CF-AutoRoot via ODIN and the it says PASS and the phone restarts normally as it should but the root is simply not happening.
there were 2 android 4.3 updates for my device and i installed the latest (you can see the post title for the exact version)
after everything completed properly i simply tried CF-AutoRoot via ODIN and nothing is happening.
Till 4.2.2, it got rooted properly without such or any other problems.
Kindly assist me out in getting my phone rooted.
Regards.
Click to expand...
Click to collapse
The rooting worked so far for me. Have you enabled KNOX? They enhanced the security features and as far as I heard KNOX-enabled devices can't get full root. Verify whether it is enabled or not. I'm not sure whether the user enables it or not but that may be the reason. I'm also not sure whether this KNOX security really affects I9500 models. I9505 models are definitely affected.
jujuburi said:
Weird. I rooted using CF Auto Root after flashing 4.3 MJ8, it always worked! I never did OTA update though, always used Odin and full wipe.
Click to expand...
Click to collapse
Probably I never full wiped.
The apps and all other data is retained (normally all is retained when we update rom via odin).
Factory reset (full wipe) was never required earlier to get root to work.
Knox is not on from my side though I get some notifications always that some app tried to access something and Knox blocked that. But I guess that is something else because we need to manually activate Knox after opening the Knox app.
Sent from my GT-I9500 using xda app-developers app
kci83 said:
I9500XXUEMJ5 root working (almost working)... i cant run some app, without root all apps working great ;/
Click to expand...
Click to collapse
It did worked for me too but only at times.
When I updated rom switcher app, root was gone and it never happened again!
Sent from my GT-I9500 using xda app-developers app
anyone with any solution for this?
anyone with any solution for this?
Solved!
Sent from my GT-I9500 using xda app-developers app
what was the solution? did you need to do a fullwipe? or used another method for rooting?
im on 4.2.2 MG9 and would like to update to 4.3 and have root without the know issue.
thanks.
Backup and Factory reset and cache clear after updating to 4.3
Then you'll get stock Samsung 4.3
Follow the same method to root (auto root) or alternatively flash super su via cwm/twrp/stock recovery.
resitm said:
what was the solution? did you need to do a fullwipe? or used another method for rooting?
im on 4.2.2 MG9 and would like to update to 4.3 and have root without the know issue.
thanks.
Click to expand...
Click to collapse
avineshwar said:
Backup and Factory reset and cache clear after updating to 4.3
Then you'll get stock Samsung 4.3
Follow the same method to root (auto root) or alternatively flash super su via cwm/twrp/stock recovery.
Click to expand...
Click to collapse
Thank you. Will this trip the knox thing?
After using CF-AUto root you need to update Super SU App on first boot.
Then Open SuperSU app and choose to install SU Binary without using a custom recovery.
Then reboot.
Then install Titanium backup pro and use it to free all Knox related files.
There are 7 of them and you need to remove all of them.
Remember you need to install a custom recovery to install busybox. (atleast in my case)
Install http://forum.xda-developers.com/showthread.php?t=2489234 via ODIN.
Once you are on custom recovery.
Use busybox installer to install busybox.
reboot.
You are done.
resitm said:
Thank you. Will this trip the knox thing?
Click to expand...
Click to collapse
No mate.
Wait for a future update to trip that.
In the mean time, I'm trying to trip that since it isn't very difficult just lazy to try everything since everytime 1 thing fails, I need to restore the whole data and if takes much of my bandwidth.
Hope you understand.
And the device status will also remain custom.
P.S. Touchwiz UI from Samsung will hang on a later date due to some app compatibility issue (I'm not sure which app but I can tell a large set of apps and it will hang due to any one from that list) so it is preferred to shift to some other launcher on pre hand.
Sent from my GT-I9500 using xda app-developers app
thank you both avineshwar and ajhavery.
i really wanted to update but i guess i am going to wait for a while. lots of issues seem to be happening once rooted. also dont want to lose warranty with the knox thing.
it seems the custom roms such as arrow and crash also have sound issues, FC issues on some apps.
i guess ill wait and see. maybe once the nexus 5 is out i can sell the i9500 and get the nexus 5.
resitm said:
thank you both avineshwar and ajhavery.
i really wanted to update but i guess i am going to wait for a while. lots of issues seem to be happening once rooted. also dont want to lose warranty with the knox thing.
it seems the custom roms such as arrow and crash also have sound issues, FC issues on some apps.
i guess ill wait and see. maybe once the nexus 5 is out i can sell the i9500 and get the nexus 5.
Click to expand...
Click to collapse
Waiting is good.
Don't sell your phone though (for obvious reasons).
You've got much to explore.
When it comes to selling, you'll get money whenever you do that so keep that option as your last bet.
Custom roms aren't really preferred from my side until you are a die hard modification fan!.
Rooting is the only problem (which is solved now I guess) on the latest firmware.
Rooting won't do any problem, believe me (except warranty).
Sent from my GT-I9500 using xda app-developers app
avineshwar said:
Waiting is good.
Don't sell your phone though (for obvious reasons).
You've got much to explore.
When it comes to selling, you'll get money whenever you do that so keep that option as your last bet.
Custom roms aren't really preferred from my side until you are a die hard modification fan!.
Rooting is the only problem (which is solved now I guess) on the latest firmware.
Rooting won't do any problem, believe me (except warranty).
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
hello again, i am asking this question because i cant post in the development forum yet.
i downloaded 3 files from the OP http://forum.xda-developers.com/showthread.php?t=2317105
the PDA, CSC and modem. all for MJ8, downloaded PDA is odex.
when i flashed 3 of the files with ODIN like shown in op my device. After i restarted i got errors for Unfortunately, the process com.google.process.gapps .
i searched on google and did what was suggested, like clearing dalvik cache, resetting default apps, uninstalling the play store update etc.
the phone was unusable, the errors popedup every second.
I had to go back to the MG9 4.2.2 firmware.
What did i do wrong?
have you guys tried the method mentioned in the post. it prerooted and knox free 4.3 firmware.
resitm said:
hello again, i am asking this question because i cant post in the development forum yet.
i downloaded 3 files from the OP http://forum.xda-developers.com/showthread.php?t=2317105
the PDA, CSC and modem. all for MJ8, downloaded PDA is odex.
when i flashed 3 of the files with ODIN like shown in op my device. After i restarted i got errors for Unfortunately, the process com.google.process.gapps .
i searched on google and did what was suggested, like clearing dalvik cache, resetting default apps, uninstalling the play store update etc.
the phone was unusable, the errors popedup every second.
I had to go back to the MG9 4.2.2 firmware.
What did i do wrong?
have you guys tried the method mentioned in the post. it prerooted and knox free 4.3 firmware.
Click to expand...
Click to collapse
Probably you want to upgrade to 4.3?
If so goto sammobile.com and find the latest firmware for your device from there, download and flash the same via odin.
You're now on 4.3!
Once done you can root from the auto root method by chain fire.
Sent from my GT-I9500 using xda app-developers app
avineshwar said:
Probably you want to upgrade to 4.3?
If so goto sammobile.com and find the latest firmware for your device from there, download and flash the same via odin.
You're now on 4.3!
Once done you can root from the auto root method by chain fire.
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
that would be the easiest and best solution but i am worried about the knox issue, losing the warranty and also having to sell the phone later on for a lower price.
The Knox Bootloader is.... Annoying
Anyone know if I could flash the MF9 tar in ODIN and revert back to the 4.2 Bootloader
do not you will even cause bigger problems stay cool untill a tar is released they are working hard to see what they can due the only choice you have no is to go to a ROM that is 4.3 but that I know of it is still un heard of KNOX is a whole new monster that I have a feeling is gonna tick a lot of people off love love love Samsung phones but they need to realize this could hurt them....
NO.
Sent from my SPH-L720 using Tapatalk
jprocket45 said:
do not you will even cause bigger problems stay cool untill a tar is released they are working hard to see what they can due the only choice you have no is to go to a ROM that is 4.3 but that I know of it is still un heard of KNOX is a whole new monster that I have a feeling is gonna tick a lot of people off love love love Samsung phones but they need to realize this could hurt them....
Click to expand...
Click to collapse
Thanks for the reply. If I had known that KNOX was gonna be such a problem I would of held off from upgrading...
Guess I gotta be patient until our beautiful dev community comes up with some way to deal with KNOX
Robin Dhicke said:
Thanks for the reply. If I had known that KNOX was gonna be such a problem I would of held off from upgrading...
Guess I gotta be patient until our beautiful dev community comes up with some way to deal with KNOX
Click to expand...
Click to collapse
so there is no way to go back to MDC then huh? -/-
kalanir said:
so there is no way to go back to MDC then huh? -/-
Click to expand...
Click to collapse
Well not yet.
Sent from my SPH-L720 using xda app-developers app
nope stuck just like the rest of us lol its not fun
Don't worry......it's only a matter of time. If u need a stable rom, I highly recommend sac23's custom 4.3 rom. V3 will be out soon. This rom has made it easier to cope with 4.3, well easier for us who are stuck with the Knox......check out his thread. You'll love it.
Sent from my SPH-L720 using XDA Premium 4 mobile app
I'm not sure what any of you are talking about. I updated to 4.3 a couple of days ago, then wiped and flashed a MDC tar with ODIN and brought it back to MF9 with OTA updates. Everything is fine.
---------- Post added at 12:15 AM ---------- Previous post was at 12:14 AM ----------
Robin Dhicke said:
The Knox Bootloader is.... Annoying
Anyone know if I could flash the MF9 tar in ODIN and revert back to the 4.2 Bootloader
Click to expand...
Click to collapse
Yes... You can do this. I did it. See my last post above.
Sleepycloud said:
I'm not sure what any of you are talking about. I updated to 4.3 a couple of days ago, then wiped and flashed a MDC tar with ODIN and brought it back to MF9 with OTA updates. Everything is fine.
---------- Post added at 12:15 AM ---------- Previous post was at 12:14 AM ----------
Yes... You can do this. I did it. See my last post above.
Click to expand...
Click to collapse
Hello,
How did you manage to do it?
I tried to do that with Odin 1.85 and 3.07 and nothing. It aborts right away.
edgardch said:
Hello,
How did you manage to do it?
I tried to do that with Odin 1.85 and 3.07 and nothing. It aborts right away.
Click to expand...
Click to collapse
I wiped everything in TWRP, and rebooted into download mode. Then flashed the tar with 3.07 and a PIT file. Uncheck reboot. Check Repartitition, Nand erase, and F. Reset Time. When it reboots it wiil update in recovery with the little andy dude, and then reboot to load up. I pull the battery and factory reset. It works fine. I updated to 4.3 friday morning. and decided to go back to MF9 so that I could use The HotSpot Mod and Reboot Menu. F**k 4.3...it was disapointing.
EDIT-----> READ ALL OF THE FOLLOW-UP POSTS BEFORE YOU TRY THIS.... MY PHONE HAD A UNIQUE SITUATION AND THIS WILL NOT WORK FOR MOST EVERYONE ELSE.
Sleepycloud said:
I wiped everything in TWRP, and rebooted into download mode. Then flashed the tar with 3.07 and a PIT file. Uncheck reboot. Check Repartitition, Nand erase, and F. Reset Time. When it reboots it wiil update in recovery with the little andy dude, and then reboot to load up. I pull the battery and factory reset. It works fine. I updated to 4.3 friday morning. and decided to go back to MF9 so that I could use The HotSpot Mod and Reboot Menu. F**k 4.3...it was disapointing.
Click to expand...
Click to collapse
I want proof lol. go to mja again and go back to mf9 lol
Sent from my SPH-L720 using Tapatalk
daniel4653 said:
I want proof lol. go to mja again and go back to mf9 lol
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
There is one problem. Now it won't update to MJA. Something is different, but I'm not sure what. I don't care if you don't believe me. I did it, and that is how I did it. There was one other issue. It kept redownloading the Sprint Default Configuration over and over and over. Like more than 50 times back to back.I finally deleted the apk to get that to stop. Outside of that, my phone works fine. I believe their are remnants of 4.3 and that is why it says the system is up to date on MF9 and does not prompt me for the 4.3 update. I really don't know, but m phone appears to be working perfectly.
Sleepycloud said:
There is one problem. Now it won't update to MJA. Something is different, but I'm not sure what. I don't care if you don't believe me. I did it, and that is how I did it. There was one other issue. It kept redownloading the Sprint Default Configuration over and over and over. I finally deleted the apk to get that to stop. Outside of that, my phone works fine.
Click to expand...
Click to collapse
As in tkaimg the OTA or trying to flash MJA ROM like Skyrockets or Sacs ?,
Sent from my SPH-L720 using Tapatalk
daniel4653 said:
As in tkaimg the OTA or trying to flash MJA ROM like Skyrockets or Sacs ?,
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
The OTA. It doesn't recognize any update as being available anymore. It went from MDC to MDL to MF9 just fine. Then stopped. It says it's up to date now? I'm not sure what's going on with it, but I rerooted it and it works fine. I even innitialised it on KIES to set it all the way back to stock MF9 but it still won't show any update as being available for 4.3
daniel4653 said:
I want proof lol. go to mja again and go back to mf9 lol
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
I tried it just barely as I want to go back to my mf9 rom with the stock kernel. You get a secure error on pit and also a firmware revision error "fused 4 .... 1" can't remember what the word was where the dots were. It was a no go for me. I tried to odin back to mdc like was mentioned in the previous posts.
:EDIT Definitely don't try this. Caused my data partition to get corrupt. Couldn't format it. Couldn't pit restore it. Philz recovery couldn't mount it. Finally found an option to format data and sdcard. This allowed me to format data and restore. Once again Definitely don't try if you have the mja bootloader. (I'm back up and running and will let other figure this out.)
I just found out why I was able to go back to 4.2.2!!! When I updated to 4.3 via OTA a couple of days ago, I plugged it in to KIES 3 and noticed it said "PDA:MJA, Phone:MF9, CSC:MJA".... notice the phone says MF9! I don't know how that happened, but I didn't question it at the time because it was OTA. I thought it was supposed to be that way. Last night before I went to bed I manually flashed the 4.3 update zip after using KIES to initialise my phone back to complete stock. (It wouldn't load the zip when I was rooted) Anyways.... Well this morning I plugged it in to KIES 3 after flashing the 4.3 update.zip last night and it said MJA on all three. I'm not sure how that happened, but I only got part of the OTA update a couple of days ago it appears, and thus being, it is the reason I was able to revert. Sorry if I got anyones hopes up. I just went back and edited a warning in my first post with instructions.
Bummer!!! lol i was getting all excited.
wilsonwa said:
I tried it just barely as I want to go back to my mf9 rom with the stock kernel. You get a secure error on pit and also a firmware revision error "fused 4 .... 1" can't remember what the word was where the dots were. It was a no go for me. I tried to odin back to mdc like was mentioned in the previous posts.
:EDIT Definitely don't try this. Caused my data partition to get corrupt. Couldn't format it. Couldn't pit restore it. Philz recovery couldn't mount it. Finally found an option to format data and sdcard. This allowed me to format data and restore. Once again Definitely don't try if you have the mja bootloader. (I'm back up and running and will let other figure this out.)
Click to expand...
Click to collapse
I'm having the same issue that you had with the data partition being corrupt. I had stupidly tried to downgrade stock MJA to MF9 before checking with the forums if it was possible. It got stuck in the Firmware error message (can't remember what it exactly said), but got to restore it to a stock MJA. And now its data partition cannot be recognized in any computer. IE: Whenever I plug it into the computer it used to show that it is connected via USB and give me the MTP option. Now it will not even do that and I cannot access its data partition via the computer. Kies won't even recognize it.
How did you get to format data and sdcard?
EDIT: OK, dont know how, (I'm blaming crappy cable) but now I do have access to the phone. In other words it's working normal. But in case that this were to happen again, it would be awesome to know how to format data section, so as it can be recognized by the computer. Thanks in advance.
Hi,
On MF3.
I'm rooted. I have clock work recovery installed.
I can download the update succeffuly however when the phone reboots the install begins, gets as far as 25% then fails. Phone reboots back to 4.2.2 with a message that says the install was interrupted.
Have tried twice with the same result.
Anyone else experiencing this?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
ckalantzis said:
Hi,
On MF3.
I'm rooted. I have clock work recovery installed.
I can download the update succeffuly however when the phone reboots the install begins, gets as far as 25% then fails. Phone reboots back to 4.2.2 with a message that says the install was interrupted.
Have tried twice with the same result.
Anyone else experiencing this?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
If I were you I would go back and read a little information about mf3 and what kind of recovery can be used. It sounds to me like you might be very confused. In order to correctly keep from bricking your phone you may want to read up on things. Good luck.
ckalantzis said:
Hi,
On MF3.
I'm rooted. I have clock work recovery installed.
I can download the update succeffuly however when the phone reboots the install begins, gets as far as 25% then fails. Phone reboots back to 4.2.2 with a message that says the install was interrupted.
Have tried twice with the same result.
Anyone else experiencing this?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
Since you are rooted, take a look in the /cache/recovery directory. Read the log file. It will tell you where things messed up.
For example, I had forgotten that I did something with csc and had replaced the feature.xml file. Luckily, I had a back up of the original file. I renamed it, fixed is file permissions to rw-r--r--, advanced my clock one day, and then was able to install MJ9.
Good luck, and remember you won't have root anymore when you install this (for the time being)
Yrs,
dkephart
Sent from my SAMSUNG-SGH-I337 using Tapatalk
ckalantzis said:
Hi,
On MF3.
I'm rooted. I have clock work recovery installed.
I can download the update succeffuly however when the phone reboots the install begins, gets as far as 25% then fails. Phone reboots back to 4.2.2 with a message that says the install was interrupted.
Have tried twice with the same result.
Anyone else experiencing this?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
I had the same problem. The only way I was finally able to upgrade to 4.3 was to use Odin to revert to stock (unrooted) 4.2.2 MF3 using the files on this thread: http://forum.xda-developers.com/showthread.php?t=2502003 Once I did that I ran the OTA update to 4.3 and it worked without any problems
To able to keep your root and upgrade from 4.2.2 to 4.3 you have to change your param file back to the stock. Thats all the information that I have so far so... not completely sure. But I think that is what you're supposed to do.
Because you have a custom param file, when you try to upgrade to 4.3 it's telling you there is an issue with your phone.
I may be wrong.
Is there a copy of the correct feature.xml? Im having the same issue
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
According to the log its stopping when it can't find the chat on apk. I did remove it using titanium.
Will restore it try again andbipdate the thread. Thanks for pointing out the correct log file to look at.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
I checked again and found my backup feature.xml. Typed this from mj9.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
ckalantzis said:
Hi,
On MF3.
I'm rooted. I have clock work recovery installed.
I can download the update succeffuly however when the phone reboots the install begins, gets as far as 25% then fails. Phone reboots back to 4.2.2 with a message that says the install was interrupted.
Have tried twice with the same result.
Anyone else experiencing this?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
I had the same problem happen to me on Wednesday night and last night. Today I used Odin to go back to stock MF3, however, then I couldn't get the OTA update. It kept saying my firmware was up to date each of the three times I restored it.
Now I'm finally on MJ9 after copying "update-mf3-mj9.zip" to my SD card, going into recovery mode, and updating from external SD card. Now I can use my Galaxy Gear!
Cause I want to sound like a noob.
How did you install CWM on what reads to me a MF3 S4.
Those on MF3 have been using Safestrap cause CWM hasn't been possible.
Sent from my ATT S4 MF3 using Tapatalk
jball said:
Cause I want to sound like a noob.
How did you install CWM on what reads to me a MF3 S4.
Those on MF3 have been using Safestrap cause CWM hasn't been possible.
Sent from my ATT S4 MF3 using Tapatalk
Click to expand...
Click to collapse
I was excited when I rooted the phone, then installed ROM manager premium. It allowed me to install the recovery. You can even boot into the recovery from ROM Manager.
However since the S4 is locked down tight, you can do any thing from there. So i can't flash anything. It even gives me a message saying as much.
However it is partially installed I can boot into it at will.
I will post a video of it. So that you all have an idea of what im talking about.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Don't waste your time with a video,its your stock recovery.your not the first to have done this.lets jump ahead a bit and just install Safestrap.whats Safestrap you might ask?search for it and READ please sir.
Sent from my ATT S4 MF3 using Tapatalk
jball said:
Don't waste your time with a video,its your stock recovery.your not the first to have done this.lets jump ahead a bit and just install Safestrap.whats Safestrap you might ask?search for it and READ please sir.
Sent from my ATT S4 MF3 using Tapatalk
Click to expand...
Click to collapse
While I was preparing to record it, I did notice that you are correct. Although Rom Manager goes through the motions of flashing the recovery, when you attempt to boot into the Recovery, you are faced with an Error, and default back into Android Recovery.
Although I know all about Safestrap...I think we've all missed the point. The OP was meant to get help about why the 4.3 OTA was failing 25% into the install.
I've got what I needed by being pointed to the location of the install log.....and while reading through it, I noticed that the install is failing because I removed the Chat On APK. I will install from backup and move forward.
Thank you all who provided the necessary guidance to solve the original problem.
Thank you as well to those who helped clear up the whole Clockwork vs Android recovery part. Although a minor part of the original post, it's good that we don't spread misinformation.
Cheers
ckalantzis said:
While I was preparing to record it, I did notice that you are correct. Although Rom Manager goes through the motions of flashing the recovery, when you attempt to boot into the Recovery, you are faced with an Error, and default back into Android Recovery.
Although I know all about Safestrap...I think we've all missed the point. The OP was meant to get help about why the 4.3 OTA was failing 25% into the install.
I've got what I needed by being pointed to the location of the install log.....and while reading through it, I noticed that the install is failing because I removed the Chat On APK. I will install from backup and move forward.
Thank you all who provided the necessary guidance to solve the original problem.
Thank you as well to those who helped clear up the whole Clockwork vs Android recovery part. Although a minor part of the original post, it's good that we don't spread misinformation.
Cheers
Click to expand...
Click to collapse
You handled this all very well.
ITNV said:
I had the same problem. The only way I was finally able to upgrade to 4.3 was to use Odin to revert to stock (unrooted) 4.2.2 MF3 using the files on this thread: http://forum.xda-developers.com/showthread.php?t=2502003 Once I did that I ran the OTA update to 4.3 and it worked without any problems
Click to expand...
Click to collapse
Did you use all files? I mean, I've been trying the same for the past couple of days, and I even asked in that thread if I could use just the PDA file, nobody replied so I went ahead and did it, it removed the root and I kept all my files and settings (That was the idea) but just after that I can't connect anymore to Kies ( I could without issues, I did a full backup moments before) and trying to do the sideload it always gives me the Error 7, I even tried the full SD card update,it erased everything and guess what, when it rebooted for my surprise I was still at 4.2.2 MF3, so it just did the Wipe Data and then rebooted, so I lost almost 6 hours getting everything back as it was and then, I had the Damaged SD card error so I also lost all my pictures and videos withoout back up.
So, as you can see half a day later I'm still at the same point I was this morning and with a huge loss, so, please, Did you use all the files? If you did, doing this erase everything also?
Thanks in adavance.
erasat said:
So, as you can see half a day later I'm still at the same point I was this morning and with a huge loss, so, please, Did you use all the files? If you did, doing this erase everything also?
Thanks in adavance.
Click to expand...
Click to collapse
Yes. I used all the files. The result was a completely stock unrooted 4.2.2 so, yes, it reset the phone and erased everything that I had on there. (It left my external SD card intact but I would still advise removing it if there is anything on there you don't want to lose.)
ITNV said:
Yes. I used all the files. The result was a completely stock unrooted 4.2.2 so, yes, it reset the phone and erased everything that I had on there. (It left my external SD card intact but I would still advise removing it if there is anything on there you don't want to lose.)
Click to expand...
Click to collapse
Yep, that was the reason why I just used the PDA I didn't want to lose my data, and then I did it anyways, my mistake was not doing the Odin Restore just after I realized that it erased everything and I was still at 4.2.2, that's was the perfect time to do it, but now, after I finally put everything back as it was, I simply don't see myself by my own choice, doing all this again.
Thanks.
erasat said:
Did you use all files? I mean, I've been trying the same for the past couple of days, and I even asked in that thread if I could use just the PDA file, nobody replied so I went a head and did it, it removed the root and I kept all my files and settings (That was the idea) but just after that I can't connect anymore to Kies ( I could without issues, I did a full backup moments before) and trying to do the sideload it always gives me the Error 7, I even tried the full SD card update,it erased everything and guess what, when it rebooted for my surprise I was still at 4.2.2 MF3, so it just did the Wipe Data and then rebooted, so I lost almost 6 hours getting everything back as it was and then, I had the Damaged SD card error so I also lost all my pictures and videos withoout back up.
So, as you can see half a day later I'm still at the same point I was this morning and with a huge loss, so, please, Did you use all the files? If you did, doing this erase everything also?
Thanks in adavance.
Click to expand...
Click to collapse
It was mentioned several times in that thread exactly what files to use and how to use them. There were also several pictures provided that showed EXACTLY what the ODIN screen should look like before the flash.
scott14719 said:
It was mentioned several times in that thread exactly what files to use and how to use them. There were also several pictures provided that showed EXACTLY what the ODIN screen should look like before the flash.
Click to expand...
Click to collapse
In the thread, there are tons of instances where it explains where to use each file and even pictures, I know because I read every single post, but none of them explains if I could use just the PDA one if I wanted to keep my settings while unrooting the phone, that's why I asked about it, because nobody replied to my question I decided to be the guinea pig, and yes, it works, you keep your settings, and I was glad, but as you can see, what I wanted to accomplish didn't work after all. Without all the files it doesn't fix the issue that causes the error 7 when doing the sideload.
help with mf3 to mj9
Having the same issue and formatted card with backup image.
Update got to 23 % and failed
now phone refuses to flash in odin.....and im missing factory apps preventing me from doing anything to get it back to stock
anyone have a stock restore image I could use in kies?
Would that work properly?
My S5 is rooted on 4.4.4 and I've been having lots of issues.
1. Phone would restart randomly.
2. Random apps would close.
3. If I have an app open (for example, the Camera), it would stop.
4. Phone would randomly freeze and would restart or stay frozen. I'd then have to pull the battery.
Is anybody else having these issues and/or know how to fix this? It's getting really annoying and I obviously can't use my phone properly. This is why I sometimes think about just getting a bloody iphone. ha!
We need more info. Did you freeze/uninstall anything? Does it have SafeStrap installed? Custom rom? Xposed modules? Or anything else?
I did "turn off" some apps in System > Applications and I also uninstalled some bloatware apps I didn't want. I just installed SafeStrap, so the issue was occurring way before I installed that. I have no roms nor Xposed modules.
So...take us through the steps you took to update and root.
Well, I first unrooted the phone and then updated to 4.4.4 through Kies because it would not let me update directly from the phone. The issues that I mentioned above started occurring after the update. Anyway, I then used the rooting method in one of the xda posts and started from Step 3.
xazilizax said:
Well, I first unrooted the phone and then updated to 4.4.4 through Kies because it would not let me update directly from the phone. The issues that I mentioned above started occurring after the update. Anyway, I then used the rooting method in one of the xda posts and started from Step 3.
Click to expand...
Click to collapse
This is how I root. I flash the NI2 tar in odin and use the files and instructions here. If you have the option to factory reset in the settings menu before you first flash the tar do so. Works like a charm every time for me.
Misterxtc said:
This is how I root. I flash the NI2 tar in odin and use the files and instructions here. If you have the option to factory reset in the settings menu before you first flash the tar do so. Works like a charm every time for me.
Click to expand...
Click to collapse
Let me 2nd Misterxtc' s suggestion. I was just about to suggest you Odin back to stock and start over. This time, once you are rooted and have ss installed go and make a backup. Now if you bone it up deleting stuff you can start over on a good install. Little extra work up front saves a ton down the road.
So, I un-rooted my phone using ODIN back to 4.4.4 and I did a factory reset and cleared cache. I'm restoring my apps now and some of them are still stopping - "Unfortunately Google Play (or whatever other app) has stopped." Grrr! -----So the un-rooting process did not fix my issues. =(
xazilizax said:
So, I un-rooted my phone using ODIN back to 4.4.4 and I did a factory reset and cleared cache. I'm restoring my apps now and some of them are still stopping - "Unfortunately Google Play (or whatever other app) has stopped." Grrr! -----So the un-rooting process did not fix my issues. =(
Click to expand...
Click to collapse
That happens immediately after restoring apps. Have you rebooted the phone and still have the issue? have you cleared cache and dalvik since restoring?
I did everything. I did factory reset from the Recovery. I cleared cache. I even did factory reset after the phone started up and nothing. I noticed that when I was going through Setup the last time, random system or google apps were stopping. Right now, my phone isn't connected to my google acct and I didn't install any apps, except for this one app called 'App Info' and it shows my Knox Warranty Void is 0x0, so I'm definitely taking it to Verizon this afternoon. Hopefully, they can fix it.
xazilizax said:
I did everything. I did factory reset from the Recovery. I cleared cache. I even did factory reset after the phone started up and nothing. I noticed that when I was going through Setup the last time, random system or google apps were stopping. Right now, my phone isn't connected to my google acct and I didn't install any apps, except for this one app called 'App Info' and it shows my Knox Warranty Void is 0x0, so I'm definitely taking it to Verizon this afternoon. Hopefully, they can fix it.
Click to expand...
Click to collapse
Did you flash the kernel after you flashed the update?
Misterxtc said:
This is how I root. I flash the NI2 tar in odin and use the files and instructions here. If you have the option to factory reset in the settings menu before you first flash the tar do so. Works like a charm every time for me.
Click to expand...
Click to collapse
I am having similar issues to OP. I followed your guide to a T. Here is what problems I had. After installing and running tr.apk it said device not suppored. I then went to TR website and got v3 and 'made it rain', it said it was okay. After this step 7: Shutdown and reboot once more into download mode and flash NI2_stock_kernel.tar.md5 with Odin in the AP slot.
It just sits on the Samsung Galaxy S5 (powered by android) boot screen and I cannot complete step 8. Any thoughts? Thanks in advance.
xazilizax said:
I did everything. I did factory reset from the Recovery. I cleared cache. I even did factory reset after the phone started up and nothing. I noticed that when I was going through Setup the last time, random system or google apps were stopping. Right now, my phone isn't connected to my google acct and I didn't install any apps, except for this one app called 'App Info' and it shows my Knox Warranty Void is 0x0, so I'm definitely taking it to Verizon this afternoon. Hopefully, they can fix it.
Click to expand...
Click to collapse
did you check md5 on the download? i simply installed a 444 rom and then used odin to flash 444 firmware n i was good to go lol. you must have a bad dl somewhere or doing something wrong
Sent from my SM-G900V using XDA Free mobile app
---------- Post added at 06:36 PM ---------- Previous post was at 06:35 PM ----------
Berdistheword said:
I am having similar issues to OP. I followed your guide to a T. Here is what problems I had. After installing and running tr.apk it said device not suppored. I then went to TR website and got v3 and 'made it rain', it said it was okay. After this step 7: Shutdown and reboot once more into download mode and flash NI2_stock_kernel.tar.md5 with Odin in the AP slot.
It just sits on the Samsung Galaxy S5 (powered by android) boot screen and I cannot complete step 8. Any thoughts? Thanks in advance.
Click to expand...
Click to collapse
can you take a screen of your odin on the pc? do you have n e thing else ticked? do you have a pit file etc
Sent from my SM-G900V using XDA Free mobile app
Berdistheword said:
I am having similar issues to OP. I followed your guide to a T. Here is what problems I had. After installing and running tr.apk it said device not suppored. I then went to TR website and got v3 and 'made it rain', it said it was okay. After this step 7: Shutdown and reboot once more into download mode and flash NI2_stock_kernel.tar.md5 with Odin in the AP slot.
It just sits on the Samsung Galaxy S5 (powered by android) boot screen and I cannot complete step 8. Any thoughts? Thanks in advance.
Click to expand...
Click to collapse
It should be fine if you used the ni2 file from the root.zip file. It works for me as well as others but I've seen issues with new phones. I'm not sure why.
elliwigy said:
did you check md5 on the download? i simply installed a 444 rom and then used odin to flash 444 firmware n i was good to go lol. you must have a bad dl somewhere or doing something wrong
Sent from my SM-G900V using XDA Free mobile app
---------- Post added at 06:36 PM ---------- Previous post was at 06:35 PM ----------
can you take a screen of your odin on the pc? do you have n e thing else ticked? do you have a pit file etc
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
Good idea. I will re download and double check MD5. Here is a SS of Odin. Imgur url is this (wont let me post because noob) --> /tvRayDC.jpg
I'm basically trying to narrow down whether the rebooting is hardware or software related. I might just return to stock and get a refurb unit if I can't figure it out. It seems like the restarting occurs intermittently when the phone trys to use the signal. I had one random reboot when i was in Safestrap and am also seeing reboots in 4.4.2 NCG stock. So maybe modem related? Maybe I can try another Kernel?
<br>
Misterxtc said:
It should be fine if you used the ni2 file from the root.zip file. It works for me as well as others but I've seen issues with new phones. I'm not sure why.
Click to expand...
Click to collapse
Good to know. I will double check the MD5.
Berdistheword said:
Good idea. I will re download and double check MD5. Here is a SS of Odin. Imgur url is this (wont let me post because noob) --> /tvRayDC.jpg
I'm basically trying to narrow down whether the rebooting is hardware or software related. I might just return to stock and get a refurb unit if I can't figure it out. It seems like the restarting occurs intermittently when the phone trys to use the signal. I had one random reboot when i was in Safestrap and am also seeing reboots in 4.4.2 NCG stock. So maybe modem related? Maybe I can try another Kernel?
<br>
Good to know. I will double check the MD5.
Click to expand...
Click to collapse
You canalways download the NI2 full tar from here and then follow the Root NI2 directions. If towelroot doesn't work try this. I always factory reset the phone from the settings menu before I flash the tar.