Official 4.1.2 Build - Galaxy Note 10.1 General

Hi
I have been using Nightly 4.2.2 for a while now but seeing as 4.3 official is on its way I would like to flash back to 4.1.2 so I can OTA it.
This is going to work right?
Anyway I have been trying to find a GBR in this link, although when I bought TAB it would factory reset to Germany and I would simply change the language on setup....
Is there a GBR or do I need to go with a GER one, cant see either in this link
http://samsung-updates.com/device/?id=GT-N8000&details=Galaxy_Note_10_1__3G_plus_WiFi
Appreciate your help
Thanks
Lee

You can flash a stock firmware and receive OTA updates normally.
To download the corrent firmware check this out - http://www.sammobile.com/firmwares/2/
Sent from my GT-N8013 using XDA Premium 4 mobile app

Flashed with a united kingdom download and now it is in perm loop on boot
This was originally a Germany version although why should that matter it's still the same device?
Please help
Attempting a flash data now
Sent from my GT-N7100 using xda app-developers app

Make sure the model is the same.
No matter the firmware, if the model is the same the firmware should work.
Try to reflash again.
Sent from my GT-N8013 using XDA Premium 4 mobile app

Can I ask your source saying 4.3 update is on its way?

pre4speed said:
Can I ask your source saying 4.3 update is on its way?
Click to expand...
Click to collapse
i too am surprised of his words
link plz

pre4speed said:
Can I ask your source saying 4.3 update is on its way?
Click to expand...
Click to collapse
Jaspreet.master7 said:
i too am surprised of his words
link plz
Click to expand...
Click to collapse
My apologies, I assumed 4.3 due to note 2 already being given it, now know it is only 4.2 they will eventually give us...sorry for my mis quote
reg tab...reset tab in recovery mode, then came back on no issues...

Related

Indian OTA 4.1.1?

Any one receive an OTA update yet? There is a new firmwae on sammobile date 5th of december. Downloading as we speak.
Sent from my GT-P3100 using Tapatalk 2
Got it this morning.
Sent from my GT-P3100 using xda app-developers app
Can anyone post a mirror for this update? Can't download from hotfile due to restricted Wifi of university
divzzen said:
Got it this morning.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
OTA or Sammobile? I can't see the OTA. Is it because I'm rooted?
Sent from my GT-I9100 using Tapatalk 2
Yes i too wanna know if ota has been made available or not.
There is an official 4.1.1 firmware release for India with the suffix of CLL5. Can get from Samsung download site HERE
The release of 4.1.1 is at a global scale ...
Just flashed the latest update via ODIN. OTA and kies refused to show the update.
I'd get any firmware file from sammobile. They are more trustworthy.
Besides that site doesn't even have the file.
mrcreativity said:
Just flashed the latest update via ODIN. OTA and kies refused to show the update.
I'd get any firmware file from sammobile. They are more trustworthy.
Click to expand...
Click to collapse
If you flashed latest Indian version pls tell me complete procedure to flash.
Also pls upload required software/files
And do i need to clear data after update???i am currently on stock ics 4.0.4
Thanx...
Also tell firmware version yet flashed.
Can I update from leak firmware (P3100DDBLI1). Just flash new firmware via ODIN?
Ronal_N7 said:
Can I update from leak firmware (P3100DDBLI1). Just flash new firmware via ODIN?
Click to expand...
Click to collapse
Download the latest file from sammobile and then odin flash it. I don't see why u can't even if you are on a leaked firmware.
Sent from my GT-P3100 using Tapatalk 2
mrcreativity said:
Download the latest file from sammobile and then odin flash it. I don't see why u can't even if you are on a leaked firmware.
Sent from my GT-P3100 using Tapatalk 2
Click to expand...
Click to collapse
Installed the same through ODIN flash yesterday. Had to take a back-up of data before restoring it.:good:
The fonts look really odd. Anyone notice they aren't as clear any more
Sent from my GT-P3100 using Tapatalk 2
I have a rooted P3100. I was able to install the OTA directly on the tab, and retain root as I could use Titanium Backup etc afterwards. YMMV of course.
I got an error message at the end saying that OTA did not succeed etc but that was irrelevant and probably just some ROM check from Samsung.
The tablet felt a bit slow during the first few minutes of use but is working more smoothly now. I don't like the new launcher much, somehow the stock 4.0.4 felt nice even after I had tried some of the other launchers. Hopefully it will feel better after I get used to it.
No battery percentage
Sent from my GT-P3100 using Tapatalk 2
mrcreativity said:
Download the latest file from sammobile and then odin flash it. I don't see why u can't even if you are on a leaked firmware.
Sent from my GT-P3100 using Tapatalk 2
Click to expand...
Click to collapse
I mean we need to flash previous official firmware before flash 4.1.1???
Thanks!
Ronal_N7 said:
I mean we need to flash previous official firmware before flash 4.1.1???
Thanks!
Click to expand...
Click to collapse
No you don't need to flash previous firmware if you are flashing full Rom.
You need to flash required firmware if you are installing ota update.
Droidlover123 said:
No you don't need to flash previous firmware if you are flashing full Rom.
You need to flash required firmware if you are installing ota update.
Click to expand...
Click to collapse
Okay, thanks! I will try.
mrcreativity said:
No battery percentage
Sent from my GT-P3100 using Tapatalk 2
Click to expand...
Click to collapse
Yup this update is an utter ****...no screenshot soft button ...tablet UI notification window has been moved ...blury text...
Is this what we were waiting for..???
Sent from my GT-P3100 using xda app-developers app
yup the text is blurry and a little too small to read
Hello,
Anyone having Wifi issues after the OTA update like me?
My Wifi on Tab2 became unstable
Keeps popping that "Connected to Wifi Network" Message, though Signal strength is very strong, Just few feet away from router.
Also does anyone know how i can i get the Lock Screen rotated to Landscape mode with the PIN lock.
Mine just stuck in Portrait Mode.
So far TouchWiz home crashed atleast once,
slower performance than 4.0.4
current JBA 4.1.1 sucks so far, for my Tab2

Directions for how to flash 8010 firmware onto the 8013, then get JB over the air?

Could I please get directions for how to flash 8010 firmware onto my 8013?
I hope that by doing this, I'll be able to update to Jellybean over the air. Is this possible and is it a good route to getting JB on the 8013
Sent from my GT-N8013 using xda app-developers app
dtziheucdavis said:
I hope that by doing this, I'll be able to update to Jellybean over the air.
Click to expand...
Click to collapse
You can't. You have a U.S. CSC and the update is for the German CSC "DBT." So with a German ROM on a U.S. CSC you won't receive any updates (ever) via OTA or Kies. There are instructions for both rooted and stock Wi-Fi Note's in the big thread that explain how to load the German base ROM and and then apply the update for people with non-German CSC's. If you decide to install the German ROM you can replace it with the U.S. version when it finally comes out and then you'll start to receive updates again normally.
dtziheucdavis said:
Could I please get directions for how to flash 8010 firmware onto my 8013?
I hope that by doing this, I'll be able to update to Jellybean over the air. Is this possible and is it a good route to getting JB on the 8013
Sent from my GT-N8013 using xda app-developers app
Click to expand...
Click to collapse
Check your inbox + download german rom instead of uk rom in the pm then after flashing download csc changer from market and change csc to dbt and you will get the ota to jellybean (german rom has english and other languages normally)
Sent from my GT-N8000 using xda app-developers app
Thanks all. Which csc changer should I use? In the play store there are several, and most say they are for galaxy s devices.
Sent from my GT-N8013 using xda app-developers app
dtziheucdavis said:
Thanks all. Which csc changer should I use? In the play store there are several, and most say they are for galaxy s devices.
Sent from my GT-N8013 using xda app-developers app
Click to expand...
Click to collapse
This one https://play.google.com/store/apps/details?id=com.manniakk.cscselector
Sent from my GT-N8000 using xda app-developers app
What is the advantage of changing csc and getting German ota rather then just doing the update manually? Seems like extra work to me.
Sent from my GT-N8013 using xda app-developers app
GETCASHMONEY said:
What is the advantage of changing csc and getting German ota rather then just doing the update manually? Seems like extra work to me.
Sent from my GT-N8013 using xda app-developers app
Click to expand...
Click to collapse
You need to have a german base rom to do the update Anually but you have n8013 which has different software and the jellybean firmware isn't yet avaliable on samfirmware, so the only way to get it is by flashing the ics then change csc and then get the ota to jellybean
Sent from my GT-N8000 using xda app-developers app
Alright I just followed your PM directions to change the firmware and switch to German ROM. It reset my device, as you said. When I check my device settings --> About Device, it now says "8010". When I go to software update though...it says "Access to the software update service is provided to users in the order in which they request it. Try later." Arrggghhhhhhh!!!!
I connected the device to my computer and open Kies, but also no update.
dtziheucdavis said:
I connected the device to my computer and open Kies, but also no update.
Click to expand...
Click to collapse
Have you changed the csc to dbt? Also which one did you download the august or September rom, it happened for me once and i changed the csc to dbt and have done full factory reset from recovery and ota worked after that
Sent from my GT-N8000 using xda app-developers app
I got the September ROM: "KIES_HOME_N8010XXALI3_N8010OXAALI3_1081475_REV00_user_low_ship.tar.md5"
I also used the suggested program to change the csc to "DBT"
hoss_n2 said:
then change csc
Click to expand...
Click to collapse
There's no reason to change the CSC. You can just flash the German (DBT) ROM and update and leave your original CSC as-is. Changing the CSC wipes the device and you'll have to change it back if your device ever needs repair. People are better off keeping their original CSC, using the German ROM until JB for their region comes out, and then flashing to it and replacing the German ROM. And none of what I described requires the device be wiped. I don't understand the sudden fascination with changing the CSC. The Note's no different than any other Samsung device.
BTW, how to check cdc on this tablet?
Barry, just saw this post from you : http://forum.xda-developers.com/showpost.php?p=35431458&postcount=179
I'm going to try it now.
Got it to work! Thank you!!
do you mean csc? use the tool suggested earlier
dtziheucdavis said:
Got it to work! Thank you!!
Click to expand...
Click to collapse
Do the modded multi window apps work with this build? I assume so, but just curious.
Sent from my SPH-L710 using xda app-developers app
GETCASHMONEY said:
Do the modded multi window apps work with this build? I assume so, but just curious.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
yes, the ones I have tried work quite well.
Although, I cannot get gmail, youtube, maps to work beacuse I cant figure out how to completely uninstall them before reinstalling the modded apks
Is there any downside to doing this while waiting (not so) patiently for the official 8013 release from Samsung?
Sent from my SCH-I535 using xda app-developers app
I was very worried about this as well, afraid of ruining an already great device. I have been playing with my tablet all night and so far have not seen any downside. Tablet is much smoother and has really nice new multiwindow functionality, apps, etc

For N8013 with German 4.1.1 wanting to downgrade

I had my N8013 using the German 4.1.1
Obviously, I wanted the US 4.1.2 update from today.
I spent hours with a $500 paper weight... hopefully this will help someone.
1. Download the Prerooted UEALH2 Firmware Package HERE
I know this includes everything [kernel], but my Note wouldn't boot up at all.
2. Gran the UEALH2 stock kernel HERE
Both PDA.
It worked for me... you can try it out, but don't blame me if something goes wrong.
Why cant you download ICS for 8013 from Samfirmware and then OTA to 4.1.2
samir_a said:
Why cant you download ICS for 8013 from Samfirmware and then OTA to 4.1.2
Click to expand...
Click to collapse
Cause he wants root and SuperSU preserves it when upgrading in some cases?
Thank you. Do you just flash them in PDA one at a time after each other?
Sent from my SPH-L710 using xda app-developers app
why would you downgrade when you can just flash using mobile odin?
I need the firmware to flash through mobile Odin. Has it been released?
Sent from my SPH-L710 using xda app-developers app
Hey guys fast question.
On a N8013 I hit update and it says "Access to the software update service is provided to users in the order in which they requested it. Try again later"
Does all that = BUSY?
GETCASHMONEY said:
I need the firmware to flash through mobile Odin. Has it been released?
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
+1
Sent from my SGH-T989 using xda app-developers app
Mr. bird said:
+1
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Mobile ODIN file 4.1.2 here:
http://forum.xda-developers.com/showthread.php?t=2101131
Works great!
Stuck on Android Screen
Tried following the OP. Got the Android with the Blue orb. Works quickly to 25% but just sits there. Can anyone help me out please before my battery dies?!

How to get ota jdq39e?

Hi,
I need help getting the latest ota update. I flashed the factory image jdq39. I have stock ROM now with stock recovery and no root. I have also done a factory reset after flash.But I'm still not getting the update . Help plz
Sent from my Nexus 4 using xda app-developers app
Here you can download the OTA or full image http://www.randomphantasmagoria.com/firmware/nexus-4/occam/, here`s how to install it http://forum.xda-developers.com/showthread.php?t=2145848.
gee2012 said:
Here you can download the OTA or full image http://www.randomphantasmagoria.com/firmware/nexus-4/occam/, here`s how to install it http://forum.xda-developers.com/showthread.php?t=2145848.
Click to expand...
Click to collapse
I have already done what you said . I need the latest ota jdq39e. Which isnt there in the link you gave .
Sent from my Nexus 4 using xda app-developers app
JDQ39E was never released as an OTA thats why youre not getting it....it was only released to AOSP
uronfire said:
I have already done what you said . I need the latest ota jdq39e. Which isnt there in the link you gave .
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
OTA`s are on that site too dude as update.zips. Please look better
gee2012 said:
OTA`s are on that site too dude as update.zips. Please look better
Click to expand...
Click to collapse
he cant update anymore because hes already running the current version of the OTA...Build jdq39E which is the one hes looking for was never released as an OTA therefor no update...it was only pushed as source code in AOSP ...

update??? i9505

guys when is the i9505 getting the MEA update???
am still on MDM havent got any new Firmware is it due to rooting and custom recovery or what
When your device has a custom status you will never get the update download a pre rooted stock rom from the development section and flash it.
Sent from my GT-I9505 using xda app-developers app
benni2903 said:
When your device has a custom status you will never get the update download a pre rooted stock rom from the development section and flash it.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Rlly wat the heck
even from kies
benni2903 said:
When your device has a custom status you will never get the update download a pre rooted stock rom from the development section and flash it.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
my csc is MDB (XEH)
do i need to install the stock room with the same csc or what
qazmed said:
my csc is MDB (XEH)
do i need to install the stock room with the same csc or what
Click to expand...
Click to collapse
I'm from germany and installed the rom without any problems from here:
http://forum.xda-developers.com/showpost.php?p=42798412&postcount=2
There are 29 csc codes in it so I guess you will be fine with that
benni2903 said:
I'm from germany and installed the rom without any problems from here:
http://forum.xda-developers.com/showpost.php?p=42798412&postcount=2
There are 29 csc codes in it so I guess you will be fine with that
Click to expand...
Click to collapse
Which one secondly i did a triangle away so now i can get ota tight
qazmed said:
Which one secondly i did a triangle away so now i can get ota tight
Click to expand...
Click to collapse
Boot your device into download mode. If your phone status is official you will be able to get OTA Updates.
I've installed the first firmware from the post. (pre rooted)
benni2903 said:
Boot your device into download mode. If your phone status is official you will be able to get OTA Updates.
I've installed the first firmware from the post. (pre rooted)
Click to expand...
Click to collapse
Ya its official with custom binary no thanks alot for replr

Categories

Resources