Related
Hello,
I want to install the 2.2 rom, but I dont know how, I've searched here, but I couldnt understand much, the link I've tried are dead or in russian (which confuses me a lot).
So I'd really love if someone could make a step by step tutorial to help me out.
Please, include links.
Thanks
And please, if you can, plz help me understand what is the recovery mode, and how to do so...
Thank again
Follow this thread: http://forum.xda-developers.com/showthread.php?t=857213
If you can't understand...I'll post another guide.
This is a guide I followed from another forum, and posted elsewhere with some minor additions in case anyone had problems.
The guide is from a forum post at the android forums,it is NOT my work, the added bits are mostly what I have found from browsing here and from asking questions. While I can't be held liable if you mess your phone up having done so myself I thought this could helpa few people and save them searching various threads for answers so hope it helps
The guide
To install this ROM you need to have fastboot enabled on your phone. If you have Android 1.6/2.1 installed from LG, then fastboot is not enabled. I will explain how to enable fastboot on your phone (this involves re-flashing/replacing your currently installed firmware):
I am unable to post links yet so you will have to copy and paste the appropriate link into your browser replacing the ** with tt
KDZ Updater Carphone Warehouse Unlocked.zip can be downloaded at h**p://goo.gl/7aRTc - A link to a zip archive with all the files needed to flash to Android version 2.1 with fastboot (Carphone Warehouse Unlocked)
KDZ Updater Europe Open.zip can be downloaded at h**p://goo.gl/BOcYT - A link to a zip archive with all the files needed to flash toAndroid version 2.1 with fastboot (Europe Open)
Download the version that best applies to you, if you live in the UK, I'd recommend you download the Carphone Warehouse Unlocked version, whereas if you live in Europe, I'd recommend the Europe Open version (simple right? )
I live in the UK and used the open rom from Europe as the Carphone Warehouse rom would not install
Now, how to flash these versions; I'll explain in detail how to flash the ROM's from starting with backing up.
Instructions to install ROM with Fastboot:
1. Before you start, make sure you backup all your data by installing the z4root.1.3.0.apk file onto your phone, then open it and choose 'Permanent Root'. Your phone will root and reboot. Then go to the Market and install 'MyBackup Root', open it and do a backup of your apps and personal data (contacts, sms, call log etc.) Once this is done, go to Settings>SD Card and Phone Storage>Unmount SD Card, a notification in the notification bar should appear saying 'SD Card safe to remove'. Remove the battery cover and remove the SD card and store it in a safe place. Then continue to step 2.
2. Extract the .zip file you downloaded to your computer (e.g. your desktop). Open the folder and install MSXML 4.0 SP3 Parser (msxml.msi).
3. Once that has finished, install LGAndroidDriver_WHQL_ML_Ver1.0_All_Win7.exe which are the drivers so your computer will recognize your phone.
4. Next, open KDZ_FW_UPD.exe
(i) Change 'Type' to '3GQCT' *THIS IS A MUST, THE UPDATE WILL NOT WORK OTHERWISE AND YOU MAY BRICK YOUR PHONE*
(ii) Make sure 'PhoneMode' is set to 'DIAG'
(iii) Browse for the 'V20B_00+Fastboot.kdz' file.
5. Prepare the phone by enabling USB Debugging by going to Settings>Applications>Development>Enable USB Debugging and connect the phone to the computer via USB cable and wait for the drivers to install for the phone.
6. Click 'Launch software update' and do not use your computer until the update is complete. The update will take roughly 10-20 mins to complete.
If you have a problem with this try a different rom, this guide offers two to choose from.
Instructions to install CyanogenMod:
Once the update is complete, your phone will reboot, what you need to do is power off the phone and whilst the phone is off, press and hold the 'Camera' button all the way ANDpower on the phone, make sure you hold the 'Camera' button. The phone will display the LG logo and disappear, then display a blank screen. The phone is now in fastboot mode!
Now you want to download this file: Flashing CyanogenMod.zip and extract it to a folder called 'Android' (without the quotes '') on the C: drive (you'll probably need to make this folder yourself.
1. Now open CMD with administrator privileges (Search for CMD in the start menu and right click on 'cmd' and click 'Run as Administrator' )
2. Connect the phone to your computer via USB cable and wait for the necessary drivers to install.
If when connected with a usb cable the computer says "waiting for device" and nothing else happens try installing the fastboot drivers. You can do this by going to the control panel of your pc, from the Windows start menu, opening the list of devices and where you see the one representing your phone (likely, as was the case with me, it will say android and have a yellow exclamation mark over it). Different versions of Windows do things slightly different but what you need to do is simply update the driver by choosing the icons properties box choosing UPDATE or INSTALL DRIVER and when asked pointing it to the folder where you unzipped the drivers.
3. Then go back to the cmd window and type:
Code:
cd C:\Android
(i) Then type:
Code:
fastboot.exe -w
(ii) Once that's completed, type:
Code:
fastboot.exe erase system
(iii) Once that's completed, type:
Code:
fastboot.exe flash system system.img
(iv) Once that's completed, type:
Code:
fastboot.exe flash boot boot.img
(v) Once that's completed, type:
Code:
fastboot.exe reboot
4. Your phone will now reboot with CyanogenMod 6.1.1 (Android 2.2.1). The first boot might take longer than a normal boot.
If your phone stays at a blank screen you simply forgot to do one of the above steps, in which case simply repeat them. It is likely if that happens that you simply forgot the flash boot image instruction.
5. You can now re-insert your SD card and go to Settings>SD Card and Phone Storage>Mount SD Card
Enjoy!
The instructions for flashing both the firmware with fastboot and flashing CyanogenMod are included in the zip archives called 'Readme'. I'll update the links so that you'll always have the most up to date version of CyanogenMod available for download, note that if you choose to update your phone you will loose all your data including apps etc. so backup before you update
And that, with a few comments added by myself, is the guide.
Once you have set your phone up the way you want power off your phone. Hold the HOME and POWER buttons down while the LG logo appears and you will see a menu appear on screen.
Using the volume down key to navigate the different menu choices, and the camera button to select an option choose the BACKUP OR RESTORE option and from the sub menu that it will give you choose BACKUP.
This will make a backup of your phone AND all your data, if you ever mess up an update or think you have damaged your phone in the future simply holdthe POWER and HOME buttons down and when the menu appears choose the RESTORE option
Click to expand...
Click to collapse
You also need fastboot drivers.
http://forum.xda-developers.com/attachment.php?attachmentid=495093&d=1295551234
guide to install openswift
please, anybody who has rights to edit first post of openswift thread,
add this link, is very good guide
http://android.modaco.com/content/lg-gt540-optimus-gt540-modaco-com/329916/a-full-guide-to-getting-android-2-2-on-your-phone-for-total-newbs-like-me/
somoant said:
please, anybody who has rights to edit first post of openswift thread,
add this link, is very good guide
http://android.modaco.com/content/lg-gt540-optimus-gt540-modaco-com/329916/a-full-guide-to-getting-android-2-2-on-your-phone-for-total-newbs-like-me/
Click to expand...
Click to collapse
Oh...there's the link. Been trying to find it! Thx =)
MegaBubbletea said:
Oh...there's the link. Been trying to find it! Thx =)
Click to expand...
Click to collapse
you're welcome
Another question, which one should I donwload?
KDZ Updater Carphone Warehouse Unlocked.zip
KDZ Updater Europe Open.zip
My phone is from US, so both would work?
brunouvn said:
Another question, which one should I donwload?
KDZ Updater Carphone Warehouse Unlocked.zip
KDZ Updater Europe Open.zip
My phone is from US, so both would work?
Click to expand...
Click to collapse
Either one will be fine. Those are just for temporary Rom because they have fastboot. You wont be keeping them.
Sent from my GT540 by MBt
little question... how long does it takes to complete the process? my phone is on download mode for like 30 minutes.. kinda nervous here, its stuck at:
3GQCT : wParam = 205, IParam = 0
btw, internet should be on?
What!? You sure u followed the instructions very carefully? Using the KDZ updater tool and correct settings?
yes, followed step by step
What happens if I cancel the process?
Well...which step are you on at the moment?
Step Complete : C Drive Erase
Wo wo wo...so it's done? Finish flashing v2.1 on ur android with fastboot?
dont understand, its done?
Well...what's happening on screen in the updater? Does your phone reboot now? No more safe mode?
If it is rebooting then it's done. Now all you have to do is get into fastboot mode which means holding CAMERA + POWER when turning on your phone.
on the phone is still download mode and the last line on the updater is:
3GQCT : wParam = 205, IParam = 0
Did you uncheck "Mass Storage Only" in the phone before you flashed? That may be ur problem....or try unmounting the SD.
yea, I think mass storage only was off, and sd card isnt in
What about USB debugging mode? That needs to be checked.
Just tried to install Urukdroid , went ok until this step :
Boot to SDE:
power on (2) Archos, hold up/+ volume key (1) until you see "Archos AXXXX - Boot Menu", choose "Developer edition"
You should see "UrukDroid? 1.0 Installation framework" title. Please choose simple install method. When asked to, connect Archos to PC (5) once again and copy UrukDroid?-install.tgz, disconnect Archos from PC properly (umount, safely remove device etc.) and press power button (2) shortly. Now EI will check installation file and prepare it for next step.
never saw / or see UrukDroid? 1.0 Installation framework , and so turning into a circle
...can anyone help me out , archos is almost dead
Thanks
paterdamiaan said:
Just tried to install Urukdroid , went ok until this step :
Boot to SDE:
power on (2) Archos, hold up/+ volume key (1) until you see "Archos AXXXX - Boot Menu", choose "Developer edition"
You should see "UrukDroid? 1.0 Installation framework" title. Please choose simple install method. When asked to, connect Archos to PC (5) once again and copy UrukDroid?-install.tgz, disconnect Archos from PC properly (umount, safely remove device etc.) and press power button (2) shortly. Now EI will check installation file and prepare it for next step.
never saw / or see UrukDroid? 1.0 Installation framework , and so turning into a circle
...can anyone help me out , archos is almost dead
Thanks
Click to expand...
Click to collapse
You have to do this:
Boot (Volume Down - )>>Recovery System>>Repair Device>>Refomat Disk
After this you have to connect your archos to your pc and copy a *.aos file from archos.com (firmware)
after this procedure, your archos will have the normal archos os and the sde
You should try to install urukdroid again, you may had a wrong zImage or initramfs...
Greets,
Lenn
Can go in the menu , but what is the next step ..reformat device ?
paterdamiaan said:
Can go in the menu , but what is the next step ..reformat device ?
Click to expand...
Click to collapse
Yep
your device will be format the disk and after that you have to manually copy a firmware from archos.com
Lenn said:
Yep
your device will be format the disk and after that you have to manually copy a firmware from archos.com
Click to expand...
Click to collapse
Coooool now is my device completly dead ....black screen and no recovery screen
paterdamiaan said:
Coooool now is my device completly dead ....black screen and no recovery screen
Click to expand...
Click to collapse
back in business, recovery screen is back , will perform that fimware update
the original firmware did not helped at all , 1 update failed
paterdamiaan said:
the original firmware did not helped at all , 1 update failed
Click to expand...
Click to collapse
You have to install the firmware (latest) directly after the format... usually it say after the format that you have fo connect your archos with your pc and copy an aos file
Lenn said:
You have to install the firmware (latest) directly after the format... usually it say after the format that you have fo connect your archos with your pc and copy an aos file
Click to expand...
Click to collapse
lenn , that I did not got you know , after the format the device did not asked at all to connect the archos , I did updated it manually , will try again and let you know
Lenn , yep now the device did asked for connecting my pc , copied the file to the device (did a new download from archos site) and hit ok ......Update failed: 1 as a result , so did not worked at all .
paterdamiaan said:
Lenn , yep now the device did asked for connecting my pc , copied the file to the device (did a new download from archos site) and hit ok ......Update failed: 1 as a result , so did not worked at all .
Click to expand...
Click to collapse
len changed the read/write accesses ..now ok , going for Urukdroid again
Lenn, you helped out with my first problem ..thank you for that.
I'm trying to install the Urukdroid but is not going well , the last step transfer the Urukdroid 1.0 installation framework and pressing the power ..after that getting the error file of a corrupt or wrong file and the device is asking for another transfer ..what can be wrong , I did downloaded the file many times from different file locations?
Hope you have some kind of solution
Thanks
I have problem for root x8 with flash tools 2.9.
I insltall driver from flashtool and install ggsetup-2.2.0.10.
Flashtool say this
Code:
13/015/2011 16:15:34 - INFO - <- This level is successfully initialized
13/015/2011 16:15:39 - INFO - Connected device : E15
13/015/2011 16:15:39 - INFO - Installed version of busybox : None
13/015/2011 16:15:42 - INFO - Pushing .\custom\root\busyboxE15 to /data/local/tmp/busybox
and will not move forward with the procedure.
I also try SuperOneClick but he say not rensponding.
check this things first.. (using superone click)
-have u tick usb debugging in apllication -> development ..?
-did u select charge phone when u connect it..?
-if u succesfully root it, reboot
i just follow this up and never had a problem...
maybe your phone is rooted but still in R/O Mode . . try installing Root Explorer and Change R/O to R/W . . hope this helps . . i also have this kind of problem when installing xRecovery . .
or install AndroidSDK first because i also had this problem using SuperOneClick on my netbook that doesnt have AndroidSDK but on my PC with AndroidSDK i had no problems rooting my phone . .
Can it be R/O without root(su) permission?
Some other tips,
@check wether your x8 driver is preinstalled in the window,sumtimes its unable,you might wanna fix this by installing pc companion from your x8(it will automaticaly install x8 specific driver to your pc.
@if you are using 2.2 superoneclck than try the older version.
@always connect your phone on battery charging during the rooting
and all the other as quoted by @maliceomalice
@if still isnt working, off debugging mode, start superoneclick, connect your phone, when superoneclick prompt searching for device(or some sort off) on the debuging mode.
Hope it helps, goodluck
never tried flashtool to root. I always use SuperOneClick.
you can also root your phone using X8 Toolbox and u can also install CWM Recovery or xRecovery . . its your choice . .
Hello forumers first of all I apologize for my approximate english I'm french and I talk about english only in forums so I will do my best you to understand myself.
I'm a new user on Androïd (and smartphone too) and after learning basics functions and many docs about this I decide to root my phone.It's new,not second hand so it was never used previously.With your threads to root it I succeed in unlocking bootloader without problems.Then I wanted to install TWRP by following your tutos and other sources (vidéos.......)and at each time fastboot don't load my image.
So I'm looking for solutions in forums and web and nothing works.Here is what I did after installing a win7 rather than my usualy Linux (install problems too )for this work :
use USB2.0 rather than 3.0 to connect my phone
use 2 different cable (original with my phone box and another)
install adb/fastboot on C:\ rather than Program Files (because permissions problems during install)
use one of your threads to redo it (image from shreps)
rename the image many times and another image version too and redownloaded it too
use complete path
use mfastboot v.2 too
This is a capture from terminal after fastboot :
so I spent hours to attempt many combination and reading posts but I don't know where to look for now.
Maybe can I use another recovery than TWRP to root?Which?
For info I'm not a dev
Hmm, one cause may be that you're missing the file extension from the file name. That TWRP image usually has .img on the end
I'd enable file extensions in Windows (here's a tutorial: https://www.howtohaven.com/system/show-file-extensions-in-windows-explorer.shtml ) and also use the Tab key on the keyboard to auto-complete the full file name. Make sure that the file name you're using has the extension (else Windows may not find it).
Also, when you flash TWRP, you may see 'Image not signed or corrupt', that is a normal message as TWRP is not cryptographically signed by Motorola.
With TWRP, you need to also boot directly to the recovery after flashing - easiest way to do this is to press the Volume keys on your device until you see 'Recovery' then press the Power key to select.
Hello echo92,
in my capture it was an attempt without .img extensions I should have pointed out that when I renamed it I attempt many solutions (even just name twrp.img or twrp-athene.img or twrp or twrp-athene or original name with and without extensions etc....).
Thanks for info for display extensions about windows because I looked for manip and not find
I'm under Linux so I didn't use win for many years but I have another pb with devices recognisation by adb and not to solved for the moment.So I install a win especially for rooting my phone it seems to be easier than Linux (and tuto are under windows)
So I will try again all my manips but in a nvidia forum I saw it was a windows issue and they only recommand to let complete path.
It's the most probant solution I have found until now.
I specify when I connect my phone after start it win recognize it normally so.........
I'm going crazy :silly:
[GUIDE/TUTORIAL/HOWTO] HTC One M8 from Stock to Android 12.1 / LineageOS 19.1
[GUIDE/TUTORIAL/HOWTO] HTC One M8 any version (single SIM: m8ul, m8vzw and m8spr or dual SIM: m8dug and m8dwg) stock to Android 12.1 / LineageOS 19.1
This detailed step-by-step guide helps you transform your HTC One M8 (any version) to a powerful one with Android 12.
Make sure you have the One M8 model, in Android, go to Settings > About phone and check the model.
CHANGELOG
v6. Moved to Android 12
v5. Moved to Android 11, improve readability, update pack
v4. Prepare for Android 11, Updated pack with latest TWRP
v3. Updated pack with latest Magisk
v2.1. Drop ADB 15 sec installer and use latest adb and fastboot.
v2. Update pack and tutorial for TWRP 3.4.0-1
v1. Initial release
1) DOWNLOAD
- djibe HTC One M8 pack (~40 Mo) : https://bit.ly/djibe-onem8-pack
(includes HTC USB Drivers, recovery TWRP 3.6.1_9-0 for all m8, Magisk Root, adb & fastboot.exe).
Unzip the djibe folder from the zip on root folder of C:\ drive.
- ROM Unofficial LineageOS 19.1: https://forum.xda-developers.com/t/rom-12l-unofficial-m8-m8d-lineageos-19-1-stable.4464733/
Download latest build here (compatible with all M8 signel/double SIMs variants): https://www.androidfilehost.com/?w=files&flid=334966&sort_by=date&sort_dir=DESC
# M8 GPe partition layout is no longer supported. The device must first be converted to Sense firmware, otherwise installation will fail.
# Android 13 is incoming
+ MindTheGApps ARM 12.1: https://androidfilehost.com/?w=files&flid=322935&sort_by=date&sort_dir=DESC
+ Charge phone to 100%
+ MicroSD card formatted in FAT32
+ Copy ROM + Google Apps + both Magisk files on microSD card. Insert it in phone.
WARNING. This tutorial uses Microsoft Windows.
WARNING. Warranty is now void.
WARNING. Read carefully the sentences starting with ###.
2) BACKUP DATA AND INSTALL DRIVERS
Disable Antivirus.
Install drivers from my pack:
right click on HTCDriver.exe > click on Run as administrator and continue the setup.
Connect HTC One (while phone on) to PC, let drivers install.
In Windows explorer, HTC One should be available.
### If not make sure phone connection is in File transfer mode (see Android notifications).
### Phone is still not visible in Windows Explorer ? See fix at end of tutorial.
Collect all personal photos, videos, etc ... and backup these on PC.
Use an app like Backupyourmobile/SMS Backup & Resotre to backup texts, contacts, etc.
Check that backup is located on microSD card.
Then copy the backup on your PC.
Disconnect phone.
Check that you have the latest official updates.
### If your phone is Simlocked/carrier locked/Network locked, don't go further.
Visit official website of your network carrier (or call their support) to retrieve your desimlock code.
Ask them for details on how to remove simlock.
How do I know my phone is simlocked ? When you insert a SIM card from another operator, network is inaccessible.
Only a stock ROM can remove simlock.
To go back from custom ROM to stock, see dedicated section at the end of tutorial.
3) UNLOCK BOOTLOADER
In Android, go to Settings > About > Software information > More.
Tap 7 times on Build number. It unlocks Developer options.
Go back to the About menu, you can see the new Developer options menu.
Tap on it, accept the warning.
Toggle on the USB debugging option.
Connect phone, a message appears on phone : Allow USB debugging?
check Always allow and confirm by tapping on OK.
Now, open a Windows command on my "flash" folder (hold Shift + right click on folder -> Open a windows command here).
### Then navigate to my flash folder (if it is on desktop) with this command :
Code:
cd /d C:\djibe\flash
Enter command :
Code:
adb devices
, confirm by pressing Enter.
Command returns :
Code:
List of devices attached
HT35****** device
### If no device is found, uninstall and reinstall properly the drivers while antivirus is off. Or see fix at the end of this tuto.
### Or start fresh on another PC.
Now type :
Code:
adb reboot bootloader
Phone restarts in Fastboot mode. Wait till phone screen is blank in fastboot mode.
Type:
Code:
fastboot devices
Command returns :
Code:
HT35**** fastboot
### You may have to fix drivers again (see fix at the end of tuto)
Type:
Code:
fastboot getvar all
Bootloader must be in version 3.19 (Thx @sterphles)
Type:
Code:
fastboot oem get_identifier_token
, confirm by pressing Enter.
Command returns multiple lines.
Select with your mouse all the lines from
Code:
<<<< Identifier Token Start >>>>
(included)
to the line
Code:
<<<<< Identifier token end >>>>>
(included).
Now on keyboard copy (Ctrl + C combo), then open Notepad.
In Notepad, paste those lines (Ctrl + V combo).
Now manually remove all the (bootloader) strings from each line.
Your notepad should now look like this :
<<<< Identifier Token Start >>>>
37A5DBF4FE5F0D9F4425E54AA91AFDBF
2A20E9C67C3BB4FAE60263F76BDEC6AC
847BF9FFB11DAEA4AB88AC8710435449
9BC12E93DF4C54FFE3D064C4C810C49A
2CDAF2E0CD3A164FED4A568CB0FD2AC6
C01AA991733D949C00987062D691DE91
8AA1C97CEBC3ACE83FECE75A1D03CE72
62414C7DC36A73AFCBF433E1EBE2EDC7
E272F73309632D3EF8C86E472B65E8EF
37E46B52FE3F94FC69D1854CA3DE6F48
C3E10001B233A70B1EAF35134F51FCC6
353E0CC98534E6E60A241A7063D0BE2F
A5B752E75C1C47E6F739BDBE67D024DA
3292A14278247557632639802722A86C
E61424F7666AE085AA9905096FEED1AD
5ECBBD867544E95ABDDA277690B8CB55
<<<<< Identifier Token End >>>>>
Now visit this website : https://www.htcdev.com/bootloader/
Register on the site. Confirm registration with your email.
In the select menu, chose HTC One (M8), click Begin unlock Bootloader button.
Agree to legal terms.
Next page, go to the bottom and click continue to step 5.
In the bottom of this page, in the lower textarea "My Device Identifier Token",
copy and paste the multiple lines you just edited (my example is just above).
Click Submit.
HTC tells you : Token Submitted Successfully.
Open your mailbox (associated to your HTC account).
Copy the Unlock_code.bin file attached to email in my "flash" folder you unzipped.
In Windows command, type :
Code:
fastboot flash unlocktoken Unlock_code.bin
, confirm with Enter.
Command should return :
Code:
unlock token check successfully
Back to phone, press Volume+ to select "Yes, unlock bootloader", then Power button to confirm flash.
Now wait while phone is going to Factory reset.
Don't let Android restart by holding both Power + Volume- to enter bootloader immediately.
FASTBOOT menu is overlined in red.
4) FLASH TWRP RECOVERY
Using the same Windows command prompt, enter :
Code:
fastboot devices
to make sure phone is still available.
Then
Code:
fastboot flash recovery twrp-3.6.1_9-0-m8.img
Command returns :
Code:
finished. total time: x.xxxxs
Now on phone, press Volume- to highlight HBOOT, confirm with Power button.
You are back to the booloader screen (UNLOCKED is written on top line), press Volume- to navigate to RECOVERY, and confirm with Power button.
Phone reboots in TWRP recovery.
5) BACKUP STOCK SYSTEM
In TWRP, check Never show this screen and Swipe to Allow Modifications.
You land on TWRP Home screen.
Always make a backup of your stock system. We never know when a weird bug will decapitate the system.
Go to Backup menu, select all partitions and Backup to microSD card.
Backup the generated TWRP folder content from your microSD card to PC.
6) WIPE PARTITIONS
Back to Home menu, go to Wipe > Advanced wipe.
Select Dalvik / ART Cache, Cache, System, Data, Internal Storage then Swipe to Wipe, go back to Wipe menu.
### Don't wipe SDcard
7) FLASH ROM, ROOT/MAGISK AND GAPPS
Back to Home screen, tap on Install > choose lineage*.zip,
(if you don't see the files, tap on Select Storage and make sure Micro SDCard is active)
then Add more Zips -> Magisk*.zip,
then Add more Zips -> mindthegapps*.zip,
then Swipe to confirm Flash.
Wait for operation to end (can be long).
When completed successfully, tap on Reboot.
Tap on Do not install when TWRP asks for the app install.
Wait during long first boot.
Setup Android.
8) You can use Backupyourmobile to restore data,
use GPS Status & Toolbox app to enhance GPS fix.
That's it.
Enjoy,
djibe
THANKS to TWRP team, LineageOS team, tarkzim, ckpv5, alray, , Flyhalf205, icxj1, R1ghtC, gimmeitorilltell, All M8 contributors.
##################################################
A) Fastboot devices doesn't show any device connected
Install HTC USB drivers
Reboot PC
Open Windows Device Manager (Windows + R shortcut on keyboard > devmgmt.msc > hit Enter)
Search for phone at Other devices submenu > Device is named Android 1.0 or My_HTC
### If it is My_HTC > select it > right click > Uninstall. Disconnect phone. Reconnect phone. Now recognised as Android 1.0.
Select device Android 1.0 > right click > Update Driver
Search locally for driver > Show a list
Select ASUS Android Device.
Manufacturer: select Google, Inc. and set driver to Android Bootloader Interface
Confirm install.
B) Go back to stock from a custom ROM with a HTC One M8
- Either restore your TWRP backup with TWRP recovery
- Or restore a community TWRP backup with TWRP recovery (https://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860 see posts 2 & 3)
### With S-ON and keep device Unlocked
To find suitable backup for device, boot phone in Bootloader mode (Power + Volume-)
Look at your hboot version (hboot 3.19.0000 is most frequent)
Launch a fastboot command:
Code:
fastboot getvar all
Make sure IMEI is a valid number.
Look at your CID and MID values. Try to find exact same TWRP backups for your phone.
### Flash only exact model versions.
Then wipe all partitions and restore the correct TWRP backup an angel made for you.
- If TWRP restore fails, start with these posts :
You will need a Rom Update Utility (RUU) for your exact model version.
This is compatible with S-ON, will need to relock your Bootloader (save your Unlock_code.bin +++) and need original recovery
https://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
https://forum.xda-developers.com/htc-one-m8/general/guide-restore-european-htc-one-m8-to-t3072235
C) No IMEI visible and no cellphone network detected with HTC One M8
Composing *#06# shows an empty IMEI dialog window.
or Settings > About phone > IMEI. IMEI: Unknown, IMEI SV: Unknown
Refer to B) tutorial to get back to stock.
Tuto updated for latest TWRP recovery
Please remove the 15 second adb. The OP of adb 15 second states in his post that it's outdated and should not be used.
Never_Sm1le said:
Please remove the 15 second adb. The OP of adb 15 second states in his post that it's outdated and should not be used.
Click to expand...
Click to collapse
Very nice !
Thx, pack and tutorial updated.
Can I use this guide for my m8wl?
And if it's possible, which of the two builds should I download?
Alexcxvtr said:
Can I use this guide for my m8wl?
And if it's possible, which of the two builds should I download?
Click to expand...
Click to collapse
Hi, look at this first: http://droider.eu/2014/09/20/htc-one-m8-models/
Then pick the correct ROM.
Thank you .I did it by following your guide.
murphylim said:
Thank you .I did it by following your guide.
Click to expand...
Click to collapse
Thanks, it is always encouraging to have support.
Still a good phone
Hi, I updated pack with latest Magisk root version and checked download links.
For Windows 10 users, use HTC drivers version v4.17.0.001 - Download them from here - Zippyshare.com - HTC Mobile Driver v4.17.0.001.exe
Everything else works just fine. @djibe89 thank you.
hymnz said:
For Windows 10 users, use HTC drivers version v4.17.0.001 - Download them from here - Zippyshare.com - HTC Mobile Driver v4.17.0.001.exe
Everything else works just fine. @djibe89 thank you.
Click to expand...
Click to collapse
Hi, thanks for feedback.
Drivers 4.2.0.001 didn't work ?
djibe89 said:
Hi, thanks for feedback.
Drivers 4.2.0.001 didn't work ?
Click to expand...
Click to collapse
No. Not on Windows 10.
djibe89 said:
Now type :
Code:
adb reboot bootloader
Phone restarts in Fastboot mode. Wait till phone screen is blank in fastboot mode.
Type :
Code:
fastboot devices
Command returns :
Code:
HT35**** fastboot
### You may have to fix drivers again (see fix at the end of tuto)
Click to expand...
Click to collapse
Hi,
I'm at the stage of trying to unlock the bootloader. The phone restarts in fastboot mode but when i type in fastboot devices nothing happens.
and then if i skip that and type get_identifier_token. the return is waiting for any devices. and nothing happens.
What have I missed?
Thanks
i've since been able to get past this stage. I used htc driver 4.17. I'm now stuck on the token. cmd prompt keeps saying cannot load the file no such file or directory. but i'm so sure i have the file in the right folder
juggled_balls said:
Hi,
I'm at the stage of trying to unlock the bootloader. The phone restarts in fastboot mode but when i type in fastboot devices nothing happens.
and then if i skip that and type get_identifier_token. the return is waiting for any devices. and nothing happens.
What have I missed?
Thanks
i've since been able to get past this stage. I used htc driver 4.17. I'm now stuck on the token. cmd prompt keeps saying cannot load the file no such file or directory. but i'm so sure i have the file in the right folder
Click to expand...
Click to collapse
Hi, when
Code:
fastboot devices
doesn't return anything, it means there is an USB driver problem.
You'll have to try to fix from Windows Device Manager.
hymnz said:
No. Not on Windows 10.
Click to expand...
Click to collapse
Hi, the Driver installer from my pack (HTCDriver_4.2.0.001) sends an error during install, but then drivers finally install.
djibe89 said:
Hi, when
Code:
fastboot devices
doesn't return anything, it means there is an USB driver problem.
You'll have to try to fix from Windows Device Manager.
Click to expand...
Click to collapse
Thanks for your work. I managed to plod my way through everything and get it working. Very happy the old phone can keep going on.
juggled_balls said:
Thanks for your work. I managed to plod my way through everything and get it working. Very happy the old phone can keep going on.
Click to expand...
Click to collapse
Awesome !
Enjoy
Hi, tutorial and pack updated for Android 11
thx for the guide!
seamonkey420 said:
thx for the guide!
Click to expand...
Click to collapse
Hi, glad you liked it !
Enjoy your phone