Is it possible change rom version from high to low on n9005 for example from ml2 returning to mj7 if yes how if no why ?
FARSHOOD said:
Is it possible change rom version from high to low on n9005 for example from ml2 returning to mj7 if yes how if no why ?
Click to expand...
Click to collapse
Yes you can downgrade to MJ7 and no lower.
radicalisto said:
Yes you can downgrade to MJ7 and no lower.
Click to expand...
Click to collapse
dear sir i was on custom rom x-note7 and flashed official mj7 via odin but odin showed me fail then i flashed official ml2 it was successful. where was my mistake.
You need to wipe first and it'll install ok
Sent from my SM-N9005 using XDA Premium 4 mobile app
radicalisto said:
You need to wipe first and it'll install ok
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sure i did it full wipe then flashed mj7 result=odin fail! any idea
FARSHOOD said:
Sure i did it full wipe then flashed mj7 result=odin fail! any idea
Click to expand...
Click to collapse
What region your phone belong to? What region of MJ7 and ML2?
vndnguyen said:
What region your phone belong to? What region of MJ7 and ML2?
Click to expand...
Click to collapse
N9005XXUDML2_N9005OLBDMK2_N9005XXUDMJ7_HOME.tar :region : region is xsp =singapore flashing and workihng ok
N9005XXUDMJ7_N9005TIMDMK2_N9005XXUDMJ7_HOME.tar :region is BTU united kingdom
I FLASHED MJ7 ONCE BEFORE ML2 WHICH WAS SUCCESSFUL but now from ML2 to MJ7 it is unsucessfull.
FARSHOOD said:
N9005XXUDML2_N9005OLBDMK2_N9005XXUDMJ7_HOME.tar :region : region is xsp =singapore flashing and workihng ok
N9005XXUDMJ7_N9005TIMDMK2_N9005XXUDMJ7_HOME.tar :region is BTU united kingdom
I FLASHED MJ7 ONCE BEFORE ML2 WHICH WAS SUCCESSFUL but now from ML2 to MJ7 it is unsucessfull.
Click to expand...
Click to collapse
Any mistyping? I checked on the sammobile.com the BTU MJ7 is N9005XXUDMJ7_N9005OXADMJ4_N9005XXUDMJ7_HOME
(the CSC is N9005OXADMJ4, not N9005TIMDMK2)
Related
Hello. I want to change my csc to BTU, but is it possible without root?
Thanks
Unfortunately it's not possible without root.
Edit: There might be a solution. I think if you flash a BTU Stock firmware you will get the BTU CSC. But to do this you must have Odin and I don't know if it sets knox to 0x1.
Check Sammobile.com for BTU firmware.
Sent from a Galaxy far far away....
Mustajab Is'haq said:
Unfortunately it's not possible without root.
Edit: There might be a solution. I think if you flash a BTU Stock firmware you will get the BTU CSC. But to do this you must have Odin and I don't know if it sets knox to 0x1.
Check Sammobile.com for BTU firmware.
Sent from a Galaxy far far away....
Click to expand...
Click to collapse
It worked! Thank you!
dadooor said:
It worked! Thank you!
Click to expand...
Click to collapse
Can i ask what CSC you were on before? Network locked or unlocked?
Sent from my SM-N9005 using Tapatalk
dsm52 said:
Can i ask what CSC you were on before? Network locked or unlocked?
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
SIM, unlocked
dadooor said:
SIM, unlocked
Click to expand...
Click to collapse
How did you select BTU when you flashed the new firmware? And did it change your Knox to 0x1? (I'm on XME and am considering moving to BTU too.)
Sent from my SM-N9005 using xda app-developers app
dadooor said:
It worked! Thank you!
Click to expand...
Click to collapse
You're Welcome!
Glad I could help
I have an unlocked carrier Note 3, the csc is EVR(EE). I would like to change this to BTU(Factory unlocked).
I have odin 3.09 and the most up to date BTU Note 3 version from Sammobile, if I flash this will it change my CSC to match or do I have to do something else?
Thanks in advance.
Sent from my SM-N9005 using Tapatalk
Yes it will change you csc to BTU, just flash it in the ap slot
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
Yes it will change you csc to BTU, just flash it in the ap slot
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
Just Flashed in Ap slot but the Csc remains unchanged!
Sent from my SM-N9005 using Tapatalk
Really? It workes for me from dtm to dbt.
Download latest BTU firmware (dmj7) and flash it in odin v3.09 in the ap slot
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
It's sorted now.
I had to wipe, flash latest unbranded firmware and when it rebooted switch the phone off. Once off put the phone in to recovery. Instead of going into download mode selected restart and Csc changed.
Sent from my SM-N9005 using Tapatalk
u can also try *#272*imei#
melvinhatred said:
u can also try *#272*imei#
Click to expand...
Click to collapse
That doesn't work on the Note 3.
MaximoMark said:
That doesn't work on the Note 3.
Click to expand...
Click to collapse
i just did that a few days back
Strange, I tried that and it didn't work.
Sent from my SM-N9005 using Tapatalk
Hello,
I am using SGN 3 9005
on KNOX Counter 0×0
Kernal 0×0
Build Number
N9005XXUDMJ7
can roll back to any another version like J4 or older, using ODIN?
without any counter be effected?
please advice
thanks
baherkilani said:
Hello,
I am using SGN 3 9005
on KNOX Counter 0×0
Kernal 0×0
Build Number
N9005XXUDMJ7
can roll back to any another version like J4 or older, using ODIN?
without any counter be effected?
please advice
thanks
Click to expand...
Click to collapse
NO... It's pretty much all over the forums that MJ7 can't be rolled back.
yeah i did
ultramag69 said:
NO... It's pretty much all over the forums that MJ7 can't be rolled back.
Click to expand...
Click to collapse
I did it just fine when first flashing a rom (came from latest update, have flashed jellybean, hyper, etc.) I'd try to just try flashing a rom after a clean/wipe with Safestrap. I went down as far as MK7. I think I had to flash the stock .pit file with odin one time to make it happen one time when I soft bricked
I remember reading that the odds of triggering a knox counter with a certain app over PC (rhymes with lingo) is something like 1-10,000.
So now there is no way to roll back ?
baherkilani said:
So now there is no way to roll back ?
Click to expand...
Click to collapse
Nope! You can't rool back. You will soft brick ur phone using ODIN and even if youflash a custom ROM based on that older base, it won't boot.
If you are rooted with urdlv and kept the old bootloader it is possible with mobile odin, else no way
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
If you are rooted with urdlv and kept the old bootloader it is possible with mobile odin, else no way
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
my bootloader is MJ1 i want flash MJ7 and no change bootloader! URDLV works on MJ7? mobile odin dont trigger knox ?
Mop wont flash bootloaders -> no knox trip.
Make sure u tick "everroot"
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Hi everyone,
I have searched through the forum and did not find any way how to change CSC on 4.4.2. I am currently rooted on NA6 firmware and NA2 baseband. My current CSC is XSI (United Arab Emirates)
My unlimate purpose is to change CSC to Poland, unroot and get timely updates.
zipper3 said:
Hi everyone,
I have searched through the forum and did not find any way how to change CSC on 4.4.2. I am currently rooted on NA6 firmware and NA2 baseband. My current CSC is XSI (United Arab Emirates)
My unlimate purpose is to change CSC to Poland, unroot and get timely updates.
Click to expand...
Click to collapse
No solution so far?
Try to dial *#272*imei#
Sent from my SM-N9005 using XDA Premium 4 mobile app
nposix said:
Try to dial *#272*imei#
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Tried many times. Nothing happens. CSC Changer from play store doesn't work as well - it just freezes on "change CSC" button.
zipper3 said:
Tried many times. Nothing happens. CSC Changer from play store doesn't work as well - it just freezes on "change CSC" button.
Click to expand...
Click to collapse
This csc changer actually worked on mine but then again I have a N900W8.
This should work.
Sent from my SM-N9005 using Tapatalk
denski101 said:
This should work.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Many thanks! I have seen this way somewhere in S4 forums, but didn't think it could be used for our Note 3. I will try when I'll be ready for full wipe and post the results here.
hey_joe said:
This csc changer actually worked on mine but then again I have a N900W8.
Click to expand...
Click to collapse
So, after flashing stock roms and rooting and I have finally managed to change CSC to BTU using "CSC Select".
But stock NA6 still tells "The latest updates have already been installed". Kies also says that this is the latest firmware.
Any ideas how to officially get update to NB7? According to http://samsung-updates.com/device/?id=SM-N9005 NB7 is already rolled out for BTU region.
Thanks!
Hi,
I'm currently running jellybean 4.3
AP:N9005XXUBMJ1
CP:N9005XXUBMI6
CSC:N9005OXXBMJ1
I want to update to 4.4.2 Kitkat, but I'm not sure which firmware to download on sammobile site.
How do I check what country my firmware is from?
The firmware doesn't have any carrier branded stuff which I would like to keep.
Thanks in advance for any help!
Cheers
Use your countries unbranded fw
Sent from my SM-N9005 using XDA Premium 4 mobile app
kevinwu128 said:
Hi,
I'm currently running jellybean 4.3
AP:N9005XXUBMJ1
CP:N9005XXUBMI6
CSC:N9005OXXBMJ1
I want to update to 4.4.2 Kitkat, but I'm not sure which firmware to download on sammobile site.
How do I check what country my firmware is from?
The firmware doesn't have any carrier branded stuff which I would like to keep.
Thanks in advance for any help!
Cheers
Click to expand...
Click to collapse
Install 'Phone INFO ★Samsung★' app and you will get all info you need.
- To check what country your firmware is from: under the CSC INFO section.
- To get the right firmware to download on sammobile site: enter the Menu --> Firmware Browser...
Download link in my signature.
Killberty said:
Use your countries unbranded fw
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks. I just realised that I'm running Australia (which is where I'm from) XSA software. latest version is 4.3.... is it worth using a different countries firmware?
Is it risky?
I have root currently and my KNOX is 0x0 and I'd like to keep it that way.. I want to have 4.4.2 unbranded with root.
Any recommendation on which version I should download? and instructions for root?
does KINGO android root trip the KNOX counter?