is stuck at cyanogenmod logo or android kitkat logo, what can i do?
i always used s4 with 4.2 roms
djsolidsnake86 said:
is stuck at cyanogenmod logo or android kitkat logo, what can i do?
i always used s4 with 4.2 roms
Click to expand...
Click to collapse
Maybe you have to flash a different pit-file first. Some updates from Samsung repartioned the system and other ROMs are not compatible with it. Please check for the size of you system. If it is any bigger that 8.9GB, you have to flash the according pit file first.
body150165 said:
Maybe you have to flash a different pit-file first. Some updates from Samsung repartioned the system and other ROMs are not compatible with it. Please check for the size of you system. If it is any bigger that 8.9GB, you have to flash the according pit file first.
Click to expand...
Click to collapse
what is this pit file? how flash it?
Just clear cache partition and delvik cache by using custom recovery then reboot
Sent from dish washer
smep said:
Just clear cache partition and delvik cache by using custom recovery then reboot
Sent from dish washer
Click to expand...
Click to collapse
done but isn't working!
djsolidsnake86 said:
is stuck at cyanogenmod logo or android kitkat logo, what can i do?
i always used s4 with 4.2 roms
Click to expand...
Click to collapse
Did you do wipe before installing the ROM?
Hyuna-A said:
Did you do wipe before installing the ROM?
Click to expand...
Click to collapse
of course!
i saw that cm based on 4.2.2 work, based on 4.3 or 4.4 go stuck at cm logo (bootloop)
how solve?
djsolidsnake86 said:
of course!
i saw that cm based on 4.2.2 work, based on 4.3 or 4.4 go stuck at cm logo (bootloop)
how solve?
Click to expand...
Click to collapse
The best thing you could do right now is to reflash the rom again , and make sure your doing a full wipe , cache/dalvik/factory reset or if your using a philz recovery go ahead and choose Factory reset/Wipe to install a new rom" option or something like that.or either you can use tamirda's Superwipe from here http://forum.xda-developers.com/showthread.php?t=2379104. then install the rom and i hope this fix your problem. Have a nice day.
Repulsa said:
The best thing you could do right now is to reflash the rom again , and make sure your doing a full wipe , cache/dalvik/factory reset or if your using a philz recovery go ahead and choose Factory reset/Wipe to install a new rom" option or something like that.or either you can use tamirda's Superwipe from here http://forum.xda-developers.com/showthread.php?t=2379104. then install the rom and i hope this fix your problem. Have a nice day.
Click to expand...
Click to collapse
i already do wipe to install a new rom!
djsolidsnake86 said:
i already do wipe to install a new rom!
Click to expand...
Click to collapse
Well if im havibg this problem i will just install the stock rom or either wait for someone knows any other option to fix this problem.(Im not sure which Stock rom do you need either 4.2.2 or 4.3) Have a nice day.
very strange!
Related
Hi,
i've downloaded the latest nightly build from CM10.1 and installed it on my SG4 I9505 .Factory reset and cache/dalvik wipe has been done before the installation.
The Problem is that im stuck on the CM boot with the rotating logo. I've waited more then 10 minutest but nothing happend. After that, i've restored my stock image and reflashed the ROM again with factory reset cache and dalvik wipe.
Still the same problem...is there anything i can do?
Greetings Frickeladm
Frickeladm said:
Hi,
i've downloaded the latest nightly build from CM10.1 and installed it on my SG4 I9505 .Factory reset and cache/dalvik wipe has been done before the installation.
The Problem is that im stuck on the CM boot with the rotating logo. I've waited more then 10 minutest but nothing happend. After that, i've restored my stock image and reflashed the ROM again with factory reset cache and dalvik wipe.
Still the same problem...is there anything i can do?
Greetings Frickeladm
Click to expand...
Click to collapse
After flashing the Rom try wipe cache and dalvik should work
Tried that....still doesn't work
Frickeladm said:
Tried that....still doesn't work
Click to expand...
Click to collapse
After CM10.1 flash you must do a Wipe Data/Factory Reset
Frickeladm said:
Tried that....still doesn't work
Click to expand...
Click to collapse
Hi,
It could be the recovery.
Either try a different one, or keep trying with the one you have.
Sometimes it takes more than one go.
Sent telepathically from my S4
malybru said:
Hi,
It could be the recovery.
Either try a different one, or keep trying with the one you have.
Sometimes it takes more than one go.
Sent telepathically from my S4
Click to expand...
Click to collapse
I've tried CWM and TWRP...both didnt work. And of course i've flashed everything after CM installation
Odin and flash stock rom
Sent from my GT-I9505 using xda app-developers app
did you download the right file for the i9505?
Sent from my GT-I9505 using Tapatalk 4 Beta
I also was thinking about this: Where did you download CM10.1 for the i9505?
I have no problems with the 2013-06-04 build and the KToonsez Kernel!
Flash CM10.1
I would flash stock with Odin like @muhamet said.
Then get the lastest PhilZ Touch CWM from here (Thread). Flash it with the SGS4 Flasher.
Then wipe system, data and cache and flash the latest CM10.1 variant of @victorator from here (Thread).
Hey, I seem to have gotten myself into a pickle. Here's what happened: I wanted to do an update to Cyanogenmod 10.2, so I downloaded the ROM and gapps. I wiped dalvik, cache, and system and flashed the ROM. When I tried to flash the gapps Clockwork Mod said it was corrupt. No problem, turned the phone off, pulled micro usb card and put the gapps on that. The only problem is now I can't boot into recovery at all, with the Power+down option and ROM Manager crashes when I try to open it. So the problem is that I can't boot into recovery and I can't reinstall ROM Manager because I don't have gapps. Titanium Backup is also having problems and can't get root access. Does anyone have any ideas on what the problem is or how to fix it? Thanks in advance.
I'd Odin back to stock and start over.
jd1639 said:
I'd Odin back to stock and start over.
Click to expand...
Click to collapse
How do I do that? Will I be able to since I had CyanogenMod 10.1 on before I tried to update?
Also, It would be better if I could just reflash a custom recovery, is there any way to do that?
AwesomeDerek said:
Also, It would be better if I could just reflash a custom recovery, is there any way to do that?
Click to expand...
Click to collapse
See if you can find an odin flashable recovery. There's probably one in the development forum. Flash that.
jd1639 said:
See if you can find an odin flashable recovery. There's probably one in the development forum. Flash that.
Click to expand...
Click to collapse
Do you think this tool would work? http://forum.xda-developers.com/showthread.php?t=2297033&highlight=odin+recovery
AwesomeDerek said:
Do you think this tool would work? http://forum.xda-developers.com/showthread.php?t=2297033&highlight=odin+recovery
Click to expand...
Click to collapse
It's worth a try. If it doesn't work you could go the Odin to stock method.
hungape special
Ding! Got into recovery, now I'm gonna wipe everything. Thanks for your help
AwesomeDerek said:
Ding! Got into recovery, now I'm gonna wipe everything. Thanks for your help
Click to expand...
Click to collapse
Np
i'm writing here because no one know how help me:
my s4 boot only 4.2 roms, if i install any 4.3 or 4.4 rom will result in a cm logo bootloop
i have latest cwr, i always wipe all data (clean rom) and cache/dalvik
how can i solve this? please don't close this topic
djsolidsnake86 said:
i'm writing here because no one know how help me:
my s4 boot only 4.2 roms, if i install any 4.3 or 4.4 rom will result in a cm logo bootloop
i have latest cwr, i always wipe all data (clean rom) and cache/dalvik
how can i solve this? please don't close this topic
Click to expand...
Click to collapse
did u tried any official firmware with odin ? flash any official rom with odin and try again . i think something wrong with ur bootloader
ne0__ said:
did u tried any official firmware with odin ? flash any official rom with odin and try again . i think something wrong with ur bootloader
Click to expand...
Click to collapse
not yet, do you suggest me to flash 4.2 or 4.3? where can i find official firmwares?
update your recovery my friend
N10AP said:
update your recovery my friend
Click to expand...
Click to collapse
is already updated!
djsolidsnake86 said:
is already updated!
Click to expand...
Click to collapse
hmmm... Which recovery are you using? Are you clearing cache and dalvik before and after flashing?
N10AP said:
hmmm... Which recovery are you using? Are you clearing cache and dalvik before and after flashing?
Click to expand...
Click to collapse
latest philz touch, yes i clear all but no luck! only cm 4.2 start!
N10AP said:
hmmm... Which recovery are you using? Are you clearing cache and dalvik before and after flashing?
Click to expand...
Click to collapse
if you wont cm11 use latest cwm ,else with google edition or other aosp 4.4 use philz
djsolidsnake86 said:
latest philz touch, yes i clear all but no luck! only cm 4.2 start!
Click to expand...
Click to collapse
install rom manager and download / flash latest CWM for jfltexx (international which I`m assuming is what you have) and try again
so...
1) Install 4.2, get it running
2) Root device if you haven`t rooted it
3) Download Rom manager from play store
4) Flash recovery for jfltexx (it is only listed after you press menu and view all devices / recoveries)
ne0__ said:
did u tried any official firmware with odin ? flash any official rom with odin and try again . i think something wrong with ur bootloader
Click to expand...
Click to collapse
oke first try with phliz recovery if not than flash a official firmware with odin.
for official firmwares Here
if u want new bootloader install lastest MK or ML series
if u want to stay on old bootloader than install your own 4.2
ne0__ said:
oke first try with phliz recovery if not than flash a official firmware with odin.
for official firmwares Here
if u want new bootloader install lastest MK or ML series
if u want to stay on old bootloader than install your own 4.2
Click to expand...
Click to collapse
what are the differences?
DONT ODIN FIRMWARE FLASH 4.3!!! YOU WILL UPGRADE YOUR BOOTLOADER!!! KNOX BAD!!!
Try the official CWM from ROM manager. Trust me.
Go into ODIN mode and if you see knox then you are on new bootloader.
If not, don`t flash a 4.3 image with ODIN. You will not be able to go back to 4.2 easily
N10AP said:
install rom manager and download / flash latest CWM for jfltexx (international which I`m assuming is what you have) and try again
so...
1) Install 4.2, get it running
2) Root device if you haven`t rooted it
3) Download Rom manager from play store
4) Flash recovery for jfltexx (it is only listed after you press menu and view all devices / recoveries)
Click to expand...
Click to collapse
now i'm running miui 4.2, is ok? device is rooted
djsolidsnake86 said:
now i'm running miui 4.2, is ok? device is rooted
Click to expand...
Click to collapse
yes its fine as log as rom manager can get root permissions on your MIUI
N10AP said:
DONT ODIN FIRMWARE FLASH 4.3!!! YOU WILL UPGRADE YOUR BOOTLOADER!!! KNOX BAD!!!
Try the official CWM from ROM manager. Trust me.
Click to expand...
Click to collapse
new bootloader but deodexed roms i was using 4.3 deodexed rom with new bootloader and i was happy with it today i just flashed 4.4 google edition and theres no problem my device is flying )
N10AP said:
yes its fine as log as rom manager can get root permissions on your MIUI
Click to expand...
Click to collapse
yes, ok rom manager installed, now what next?
my recovery installed is 6.0.4.4 by philz touch
djsolidsnake86 said:
yes, ok rom manager installed, now what next?
Click to expand...
Click to collapse
go to recovery setup...
install or update clockword mod recovery
install recommended recovery
flash clockwork mod recovery. should ask for root permissions. success.
reboot to recovery and try again clearing cache and dalvik
N10AP said:
go to recovery setup...
install or update clockword mod recovery
install recommended recovery
flash clockwork mod recovery. should ask for root permissions. success.
reboot to recovery and try again clearing cache and dalvik
Click to expand...
Click to collapse
ok installed cmr, wiped all data anche cache, installed cm11+gapps and (as always) cm bootloop!
djsolidsnake86 said:
ok installed cmr, wiped all data anche cache, installed cm11+gapps and (as always) cm bootloop!
Click to expand...
Click to collapse
ok. might sound strange but check your battery for swelling
I wanted to update my note 1 to 4.4.1 kitkat but unfortunately it did not happen.
first i rooted my phone installed cwm with 6.0.3.2v and then when i flashed 6.0.4.2v rom but after that my phone it not able to boot after after samsung.
pls help me
and i am sorry for my english
Rohangarg4388 said:
I wanted to update my note 1 to 4.4.1 kitkat but unfortunately it did not happen.
first i rooted my phone installed cwm with 6.0.3.2v and then when i flashed 6.0.4.2v rom but after that my phone it not able to boot after after samsung.
pls help me
and i am sorry for my english
Click to expand...
Click to collapse
im having the same problem But with ANY aosp rom after samsung logo it bootloops and doesnt do anything else. so it just wont boot
Rohangarg4388 said:
I wanted to update my note 1 to 4.4.1 kitkat but unfortunately it did not happen.
first i rooted my phone installed cwm with 6.0.3.2v and then when i flashed 6.0.4.2v rom but after that my phone it not able to boot after after samsung.
pls help me
and i am sorry for my english
Click to expand...
Click to collapse
4.4.1? why are you flashing incredibly old nightlies?
Also it sounds like you flashed from a very old CWM build which likely didn't set selinux contexts properly. The included Omni kernel has a recent TWRP, reflash omni and wipe using that.
Entropy512 said:
4.4.1? why are you flashing incredibly old nightlies?
Also it sounds like you flashed from a very old CWM build which likely didn't set selinux contexts properly. The included Omni kernel has a recent TWRP, reflash omni and wipe using that.
Click to expand...
Click to collapse
how should just start my phone because i ried to install a new firmware through recovery mode it says some error.
so how should start up my phone
PLS DO HELP FAST
Rohangarg4388 said:
how should just start my phone because i ried to install a new firmware through recovery mode it says some error.
so how should start up my phone
PLS DO HELP FAST
Click to expand...
Click to collapse
Flash this file in recovery:
http://ge.tt/7mJqhvw/v/0?c
Then, reboot to recovery again and perform a full wipe (factory reset/data wipe, wipe cache, wipe dalvik cache, wipe system, wipe preload). You'll find those options in various places there, so dig around. Once that is done you can flash OmniROM and Gapps
and @zachdees - you most probably didn't do a full wipe, so do those steps above and it will work for you too
can you send the omni rom file
Rohangarg4388 said:
can you send the omni rom file
Click to expand...
Click to collapse
you should find your rom version here if it's officially supported: http://dl.omnirom.org/
If not..find it via the search function in the forum.
If i just want to install stockrom instead of omni rom , can you pls tell me how to do it.
pls tell me each thing step by step
http://forum.xda-developers.com/showthread.php?t=1424997
How to flash official ROM through recovery. Particularly 4.0.4 .
No...as i said use the search function and look in your device specific forum. The probability is high that your questions have already been answered. As well as sources which have already been linked. You might want to have a read of the forum rules as well as general guidelines before posting.
Sent from my Find 5 using XDA Premium 4 mobile app
Hey
i intalled TEAM WIN recovery 2.6.3 and for some reason it says "xperia D"
how can i change it? thanks!
iPain said:
Hey
i intalled TEAM WIN recovery 2.6.3 and for some reason it says "xperia D"
how can i change it? thanks!
Click to expand...
Click to collapse
whaT WAS the zip file u flashed to install TEAM WIN
sunnysays said:
whaT WAS the zip file u flashed to install TEAM WIN
Click to expand...
Click to collapse
dunnu it says teamwin v2.6.3.0 i remember i flashed xperia d rom for defy plus
iPain said:
dunnu it says teamwin v2.6.3.0 i remember i flashed xperia d rom for defy plus
Click to expand...
Click to collapse
In order to get your TEAMWIN u need to flash defy_twrp_recovery_2.6.3.0.zip
sunnysays said:
In order to get your TEAMWIN u need to flash defy_twrp_recovery_2.6.3.0.zip
Click to expand...
Click to collapse
will do thanks
and another thing... i flashed quarx 4.4.2 ROM via this guide https://www.youtube.com/watch?v=tJ3KVp09ixE
and i always lose signal no metter where i am it happends for few minutes - hours - even a day!
what can i do to fix it?
iPain said:
will do thanks
and another thing... i flashed quarx 4.4.2 ROM via this guide https://www.youtube.com/watch?v=tJ3KVp09ixE
and i always lose signal no metter where i am it happends for few minutes - hours - even a day!
what can i do to fix it?
Click to expand...
Click to collapse
i guess that bug is been fixed in the latest nightly ... flash the new nightly from this link
sunnysays said:
i guess that bug is been fixed in the latest nightly ... flash the new nightly from this link
Click to expand...
Click to collapse
just need to flash it or wipe something? after the flash i need to wipe cache and davlik?
iPain said:
just need to flash it or wipe something? after the flash i need to wipe cache and davlik?
Click to expand...
Click to collapse
you need to do a wipe cache and wipe dalvik cache after your install rom and gapps
sunnysays said:
you need to do a wipe cache and wipe dalvik cache after your install rom and gapps
Click to expand...
Click to collapse
installed your twrp but still i see the xperia d logo
iPain said:
installed your twrp but still i see the xperia d logo
Click to expand...
Click to collapse
Installation Instructions coming from stock
If you are coming from stock OS (must be rooted with CWM) or an old build of GB, ICS, or JB then flash "defy_twrp_recovery_2.6.3.0.zip" from the links under downloads.
Wipe /data, /cache, and /system in TWRP or use defy_safewipe.zip
Flash ROM
Flash Gapps
Reboot