Related
Hi Guys,
Well yesterday the Battery on my 9100 went flat this has happened before and I just charge it back up and its fine.. But this time I incurred Data Loss
Went to turn it back on and it locks on the Boot screen where its states the GSM etc.. Have gone through the usual key press to format and I keep reciving format failed
Any help would be most appriciated
Get to the bootloader screen (multicolored) by turning device off - hold camera button and turn on. Sounds like you need to reflash you device with the same or updated rom - all the wizard roms are listed in the wiki - link is top left on your screen
ul, prehaps its cos your knees are too bendy?
Imp
Ive tryed changing the rom to a newer version, but still no avail... still saying format failed.. Any more ideas before I have to send it back to Qtek... which I would really rather not do
Droc said:
Ive tryed changing the rom to a newer version, but still no avail... still saying format failed.. Any more ideas before I have to send it back to Qtek... which I would really rather not do
Click to expand...
Click to collapse
Did you sort this out? I can get to the multicolored screen and flash my wizard but it never boots past the second splash screen. I think the extended rom is corrupted somehow and I need to clear it but hard reset just ends with format failed? Any ideas?
J
i cant get my wizard to go to bootloader ? is there a way to force it ?
thnx
about: force bootloader.
Hello my friend, please use the search options, is easy to find answer for your questions. Here you will find the solution:
http://forum.xda-developers.com/showthread.php?t=294107
note: use the wiki
hi,
thnx for the help.. i did follow the steps mentioned.. but it styll doesnt wrk. whn i try to flash the rom.. it supposedly looses connection wid the computer .. the screen looses the light buh the wizard is on all the way.. u cant use it though.. buh the lights are still blinkin.. (the wifi and phone)
thnx
hey, my mda doesnt even turn on anymore, do u guys think its the battery but the battery was fine when i flashed it but then it doesnt boot to the window, so i took the battery out and put it back in and it doesnt turn on anymore.. i tried the camera, rest button and other stuffs. do u think my phone is bricked? or i should def. get a new battery and try it out?
I suggest you back to your Official rom first then start over again. I do this many times. Activesync always loose its connection before start flashing. It's a normal procedure. When you mention that your Wizard is still up and on the way, what you mean exatcly? Be more specific bringing point details on where you are stuck for instance. Then I'll try to help you out.
Good luck.
cellphoneman said:
hi,
thnx for the help.. i did follow the steps mentioned.. but it styll doesnt wrk. whn i try to flash the rom.. it supposedly looses connection wid the computer .. the screen looses the light buh the wizard is on all the way.. u cant use it though.. buh the lights are still blinkin.. (the wifi and phone)
thnx
Click to expand...
Click to collapse
Sounds a power problem to me. I've been into this couple of times after being in a bootloader mode for a long time. Plug the Wizard directly into the powerwall to start charging then back to your flashing process first doing with an official rom. I don't think you have bricked it.
joco2560 said:
hey, my mda doesnt even turn on anymore, do u guys think its the battery but the battery was fine when i flashed it but then it doesnt boot to the window, so i took the battery out and put it back in and it doesnt turn on anymore.. i tried the camera, rest button and other stuffs. do u think my phone is bricked? or i should def. get a new battery and try it out?
Click to expand...
Click to collapse
epimazzo said:
Sounds a power problem to me. I've been into this couple of times after being in a bootloader mode for a long time. Plug the Wizard directly into the powerwall to start charging then back to your flashing process first doing with an official rom. I don't think you have bricked it.
Click to expand...
Click to collapse
sry, i forgot to mention that it doesnt even charge too, both powerwall or pc
Try to enter in a bootloader mode by hold on the camera button while pressing the reset button. You'll go to bootloader. If not, remove battery one more time, wait seconds and put it in back. Then, force bootloader again and try to charge through powerwall. You should get an orange light or similar during recharging. Check your model. Hope it helps you this time.
joco2560 said:
sry, i forgot to mention that it doesnt even charge too, both powerwall or pc
Click to expand...
Click to collapse
joco2560 said:
sry, i forgot to mention that it doesnt even charge too, both powerwall or pc
Click to expand...
Click to collapse
which version is it ,G3 or G4,and which Rom were trying to upgrade with.
Well,if its a G3 then,there's some power problem,but if it's a G4 and you tried to flash a Rom with IPL/SPL included,well its a brick.
Yeah...unfortunately zabardast_1 is right about your device. If it is a G4 and you flashed a G3 ROM, you could have bricked your techtoy! Hope you knew what you was doing at that time!
Try to always provide enought information regarding your environment and device so we can help you out better!
Hi to all ,
I have the msn account:[email protected] .Once again,just to make the resume of the whole story if I remember well:The trinity was with the initial sfr 300+ software(wm5);I installed the oli1.20 flashed it with some other ROM software,did not like it and returned to the original one.Then I tried to flash it with the ROM software where all went wrong...After 1 % the screen went blank and all I can do with the device is to put it into the boot-loader mode where it says:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
When I extracted the file,I discovered that it has 2 nbh-files.I think that is the reason of my defete.Afterwords I have tried all sorts of the first aid solutions : splxploit-windows cannot connect to the device;it says that there is no WCEUS-file and therefore it cannot continue.I have tried to re-flash it through the sd-card:I re-formatted the card on fat32,without any name,put the original ROM and tried to let it boot that way.No success,it marks:loading ... and after 3-4 secs it returns into the boot-loader mode with the same message mentioned above ...
Salutations frm Luxembourg , Goran Stevanovic.
Thx all of ya , problem solved.
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
gurnek said:
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
Click to expand...
Click to collapse
1: Boot into BL (camera + power + reset hole)
2: Download the GPS enabled ROM from HTC Support, NOT from a rapidshare/megaupload/4shared etc.. mirror.
3. Flash the ROM, but use the hardspl flasher.(For some reason, it doesn't go error 270 if I use this flasher).
4. Hard Reset again.
Hello,
I have a HTC P3600 and after i make a hard reset the screen goes all black, i already try flash the phone but don't result.
If i try to make a hard reset again the screen shows "press ok to make hard reset" after that goes black again.and its completing %100 but when i want restart its still doesnt work just black screen. just working light =(
So i think not display problem.
Any solution? help me plss
Any chance of sharing the solution, guys, my SPV M700 has similar problems. I tried to flash it with the TRIN-SSPL rom, but it kept saying I need a newer version of the update software.
Now all I have is it gets stuck on the green Windows load up screen and when I reset (Camera-PWR Button-Reset) it goes onto the bootloader tri-color screen, similar to what Goranchen had on his. What do I do now, I would really like to use the phone on another network, and I have looked after it really well, I think, so would be a shame to throw it away. Please help!!
help me guys my DHD it was working very well then i just upgrade it after the upgrading process finish the phone restart and stuck on lock screen (No SIM in phone emergency calls only) i can't slide it down to continue
the touch screen is not Responding
by the way i flash it with stock ROM :
RUU_Ace_HTC_WWE_1.32.405.6_Radio_12.28b.60.140e_26.03.02.26_M_release_155891_signed.exe
but its still the same thing
stacy_us said:
help me guys my DHD it was working very well then i just upgrade it after the upgrading process finish the phone restart and stuck on lock screen (No SIM in phone emergency calls only) i can't slide it down to continue
the touch screen is not Responding
by the way i flash it with stock ROM :
RUU_Ace_HTC_WWE_1.32.405.6_Radio_12.28b.60.140e_26.03.02.26_M_release_155891_signed.exe
but its still the same thing
Click to expand...
Click to collapse
Did u pull the battery out & check?
I have just flashed the new Revolutuon Hd 6.1.5 and it works well, try flashing that rom.
Use the ace hack kit and try re-rooting your phone if problems persist.
Hope this helps.
It's a long shot but did you try sliding down from all areas of the screen. (In case there's a graphics resizing or positioning error.)
Have you tried holding down volume button on reboot? and resetting that way.
Hello folks.
Yesterday I played some games on my phone and after about 1 hour the phone just blocked . Didn't know what to do , nothing worked so I've unpluged the battery.
After that I've tryied to open it but there was something strange. There was a white screen , and just this...
I've tryied some things and now , when I open my phone it goes to bootloader ( that thing with red,green,blue and white ) , It doesn't even boot...
Sorry for my english , hope you can help me to fix it or just to tell me if it's brick or not ...
Did you try to open the device? Why?
If you phone go in bootloader check the Volume Down button, probably is blocked. Sometime happen the 2 buttons of the volume go out of they position and is tricky to put it back again. If the buttons do not do click when you push it that mean they are stuck, maybe just one of them.
I can be absolutely sure there is not any button stucked.
MikeyRo said:
I can be absolutely sure there is not any button stucked.
Click to expand...
Click to collapse
Somehow the phone boot in bootloader. The only way to do that is pushing the volume down. To me seems like hardware and not software problem.
I just don't understand, did you opened the Phone? and if yes for what reason?
My bad , didn't opened it , just powered on ( pressed the red button ).
MikeyRo said:
My bad , didn't opened it , just powered on ( pressed the red button ).
Click to expand...
Click to collapse
Are you an Android? If yes then you should boot into MAGLDR, reboot you phone and keep pressing power button. What happen?
boot into that screen with many colors
MikeyRo said:
boot into that screen with many colors
Click to expand...
Click to collapse
Ok so you are in bootloader, from there did you used Task29?
So first of all my phone blocked while playing a game. After that i've removed the battery , wait 2 seconds , put it back and power on the phone . After that it should show me android loading , but it didn't . There was just a white screen, I could do nothing .
Cause of this i've tryied the Task29 and yes I've tryied it from bootloader . But the problem is, at 100% my pc restart everytime and on pc it says "ERROR [270] 'The image file is corrupted'."
MikeyRo said:
So first of all my phone blocked while playing a game. After that i've removed the battery , wait 2 seconds , put it back and power on the phone . After that it should show me android loading , but it didn't . There was just a white screen, I could do nothing .
Cause of this i've tryied the Task29 and yes I've tryied it from bootloader . But the problem is, at 100% my pc restart everytime and on pc it says "ERROR [270] 'The image file is corrupted'."
Click to expand...
Click to collapse
I think probably the HD2 is completely dead but I don't understand why the hell your PC is restarting and get you an error. Do you have some kind of virus? Try close Firewall and Antivirus and perform Task29 again. If this will not work from bootloader try to install directly MAGLRD 1.13.07, maybe the MAGLRD will install because you have some problem with Task29. If both of this application give you the same error this is maybe related to your PC. I never saw this problem like on another thread with Security Unlocked. Let me know what happen.
Again my bad , my phone restarts, not pc. Can you give me any ID so maybe you can help me with team viewer?
MikeyRo said:
Again my bad , my phone restarts, not pc. Can you give me any ID so maybe you can help me with team viewer?
Click to expand...
Click to collapse
Even if I connect to your PC via Team this will not help because I don't have the phone in my hands. Ok, then is your phone to give you an error and reboots, try to install from Bootlader the MAGLRD and tell me what happen.
MAGLRD
The file.
Check the attachements. This happens when i run it.
MikeyRo said:
Check the attachements. This happens when i run it.
Click to expand...
Click to collapse
Reboot your PC then try MAGLRD again.
Same thing
MikeyRo said:
Same thing
Click to expand...
Click to collapse
I don't know buy I think something wrong there, or your phone just died and there is no way to let it work or is your PC, there is no other issues.
Try this: http://forum.xda-developers.com/showpost.php?p=5279236&postcount=4
Start from first step by installing HSPL4 2.08 by Cotulla.
Check also for Virus or Antivirus which will compromise the installation or the files.
It goes to 100% and then restart my phone . I'll use another PC tomorrow so let's hope it will work just fine.
MikeyRo said:
So first of all my phone blocked while playing a game. After that i've removed the battery , wait 2 seconds , put it back and power on the phone . After that it should show me android loading , but it didn't . There was just a white screen, I could do nothing .
Cause of this i've tryied the Task29 and yes I've tryied it from bootloader . But the problem is, at 100% my pc restart everytime and on pc it says "ERROR [270] 'The image file is corrupted'."
Click to expand...
Click to collapse
Were you playing/doing something heavy? Was the phone (very) hot when it froze? No longer boots?
Typical symptoms of infamous overheating problem, sorry for the bad news. Try following this post and report back : http://forum.xda-developers.com/showpost.php?p=23638873&postcount=3
Edit: @eclyptos everything's great, thanks. I've been away from the forum, there hasn't been much going on in the HD2 section. Now I come here every few weeks
MikeyRo said:
It goes to 100% and then restart my phone . I'll use another PC tomorrow so let's hope it will work just fine.
Click to expand...
Click to collapse
Yes, good idea. Let me know how it goes with different PC. EDIT: No errors this time flashing HSPL4?
Marvlesz said:
Were you playing/doing something heavy? Was the phone (very) hot when it froze? No longer boots?
Typical symptoms of infamous overheating problem, sorry for the bad news. Try following this post and report back : http://forum.xda-developers.com/showpost.php?p=23638873&postcount=3
Click to expand...
Click to collapse
Hey Marvlesz, long time my Man, How you doing?
You are right, this can be the reason why he can't boot anymore. If so will be very difficult time to revive the HD2 even if the solution are there.