[Q] New and Need Help With ClockWork Recovery - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

Hey Guys What's Up !!!!!!!
I an new so try not to bash me to hard.
I am trying to flash a custom rom to my AT&T Galaxy S 4 (SGH-I337) running Android 4.3 Baseband Version MK2
without any success at all.
I have root, I used saferoot and rootchecker says I have root as well as other apps, I also have rom manager premium v5.5.3.7. And paid for the touch option And here is where everything goes south.
No matter what I do when the phone reboots into recovery mode it boots into the standard android system recovery mode.( Manual Mode)
I see no clockwork anything.
I am dead in the water. Please Help.
The only modification other than root that I have done to the phone is change the tetherprovision.apk files with one I found out here
to reenable tethering. It worked like a champ (Sweet Thanks For That).
realwraith

Your gonna have to read up on Safestrap for MK2. It is the ONLY recovery you can use. You CANNOT INSTALL CLOCKWORKMOD RECOVERY OR TWRP RECOVERY. doing so may brick your device or make it so you lose even stock recovery.
With Safestrap for Mk2 you can install SOME Roms. So look it up.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337

RockRatt said:
Your gonna have to read up on Safestrap for MK2. It is the ONLY recovery you can use. You CANNOT INSTALL CLOCKWORKMOD RECOVERY OR TWRP RECOVERY. doing so may brick your device or make it so you lose even stock recovery.
With Safestrap for Mk2 you can install SOME Roms. So look it up.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
Click to expand...
Click to collapse
so your saying on mk2 there are roms you can flash now?

lilg754367 said:
so your saying on mk2 there are roms you can flash now?
Click to expand...
Click to collapse
Yes on safestrap.
Sent from my SCH-I545 using xda premium

[email protected] said:
Yes on safestrap.
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
where can i read about this, sorry last time i been flashing roms was when i had the samsung vibrant lol now just got back into the android world, is there somewhere on the thread that says what roms can be flashed with safestrap?

lilg754367 said:
where can i read about this, sorry last time i been flashing roms was when i had the samsung vibrant lol now just got back into the android world, is there somewhere on the thread that says what roms can be flashed with safestrap?
Click to expand...
Click to collapse
Most developers will note if it can be or if someone has had any luck in doing so. I believe SHOstock and goldeneye are able to be flashed with safe strap now but I would check into it first.

Related

Stuck at Samsung Logo! bricked! help!

Well, I just got the phone and went on to root and I did with the new method for MF3. then, installed safestrap recovery. finally, i messed up and installed an aosp rom, Gummy KitKat 4.4 and now stuck when booting phone. I cannot get into recovery, I cannot install MDB or MDL through odin, and I cant use Kies to restore since I dont have my sticker behind the phone and dont have my serial number. So, what can I do to restore the phone?? Please help. Thank you.
jdm-e4gt said:
Well, I just got the phone and went on to root and I did with the new method for MF3. then, installed safestrap recovery. finally, i messed up and installed an aosp rom, Gummy KitKat 4.4 and now stuck when booting phone. I cannot get into recovery, I cannot install MDB or MDL through odin, and I cant use Kies to restore since I dont have my sticker behind the phone and dont have my serial number. So, what can I do to restore the phone?? Please help. Thank you.
Click to expand...
Click to collapse
Check out this thread http://forum.xda-developers.com/showthread.php?t=2504311
as you found out you can only flash 4.2 based Roms with safestrap.
With the link I gave you can get the Odin files for MF3 and use Odin to reflash MF3. AS LONG AS YOUR STILL ON MF3. IF YOU UPDATED TO 4.3 THEN DO NOT FLASH IT AS IT WILL BRICK YOUR PHONE.
If I helped just hit the THANKS button
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
RockRatt said:
AS LONG AS YOUR STILL ON MF3. IF YOU UPDATED TO 4.3 THEN DO NOT FLASH IT AS IT WILL BRICK YOUR PHONE.
Click to expand...
Click to collapse
I was on MF3 and then tried flashing kitkat, i never updated to 4.3. Am I still clear to use the MF3 Tars? I hope this works. Thank you!!!
Update: The MF3 TARs worked flawlessly! THANK YOU!!!!
jdm-e4gt said:
I was on MF3 and then tried flashing kitkat, i never updated to 4.3. Am I still clear to use the MF3 Tars? I hope this works. Thank you!!!
Click to expand...
Click to collapse
Yes. Basically as long as you haven't flashed the 4.3 bootloaders you should be okay with flashing the MF3 Odin files.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337

Can't Install CWM?

I have a rooted MK2 device. I tried installing CWM through ROM Manager but my phone will not boot the CWM and when I try it comes up with an error.
It seems to be installing a Loki'd version of CWM recovery will solve the problem, but I don't how to flash loki recoveries and I've looked all over the forums for one specific to loki'd recoveries. Can someone help me out please? I'm relatively new at this so I'm totally unsure about how to proceed. Many thanks!
Sadly, no custom recoveries are currently available for MK2.
Kaze105 said:
Sadly, no custom recoveries are currently available for MK2.
Click to expand...
Click to collapse
Oh no Well I have a few questions then.
1. I would like to install a 4.4 Google Edition rom. Is there any way for me to accomplish this? Also, is it a bad idea to go ahead and flash it without a recovery?
2. Should I revert the recovery back to original? How would I go about doing that?
hsu0216 said:
Oh no Well I have a few questions then.
1. I would like to install a 4.4 Google Edition rom. Is there any way for me to accomplish this? Also, is it a bad idea to go ahead and flash it without a recovery?
2. Should I revert the recovery back to original? How would I go about doing that?
Click to expand...
Click to collapse
There isn't anything you can do so far. The only thing you could do is use an app I can't remember the name of to flash mods to your current system, but you can not flash ROMs and definitely not anything that may need a different kernel. If you want to get a working recovery then find the MJ6-MJ9 thread but only use the recovery tar file, not the rest of it.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
you sir have a locked bootloader (i think)
hsu0216 said:
I have a rooted MK2 device. I tried installing CWM through ROM Manager but my phone will not boot the CWM and when I try it comes up with an error.
It seems to be installing a Loki'd version of CWM recovery will solve the problem, but I don't how to flash loki recoveries and I've looked all over the forums for one specific to loki'd recoveries. Can someone help me out please? I'm relatively new at this so I'm totally unsure about how to proceed. Many thanks!
Click to expand...
Click to collapse
well.....if you were on MF3 then you could load safestrap and then get the google edition but it wont support the 4.4 only the 4.2.2 version of the GE
thats what i did. i highly doubt there will be an unlocked bootloader for MK2 im on mf3 and cant even update to 4.3 MK2.....ill ask the developer of safestrap and ask him because he was getting a MK2 galaxy s4 on att last week and he was doing some testing....or you can do some research your self but im happy to help even though my account says im a junior member i know quite a lot....
if safestrap works here is a link http://forum.xda-developers.com/showthread.php?t=2448726
IF SAFESTRAP WORKS LOOK UP A GUIDE ON HOW TO USE IT I AM NOT RESPONSIBLE IF YOU BRICK YOUR PHONE BECAUSE I TOLD YOU ABOUT IT also dont use the stock rom slot if all this works
Dude.
Search. Read. Repeat.
Anx XDA says ni question too stupid..Well some reaponses are..Oh GOD!!!
Sent from my SAMSUNG-SGH-I337 using Tapatalk
r1tesh said:
Anx XDA says ni question too stupid..Well some reaponses are..Oh GOD!!!
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
No question too stupid. But asking a question that has been answered hundreds of times and refusing to use the search button...

[Q] Help!!! Flashed my S4 to Danvdh GE 4.4.2 and it keeps rebooting!!!

First of all, thanks for reading this...
Here goes the story. I have a Galaxy S4 SGH-I337 AT&T. Yesterday I updated to 4.4.2 OTA. The idea of flashing to google edition ROM came into my mind so I did some research. I found 4.4.2 with NB1 baseband cannot be rooted and it has to downgrade to 4.3 first. So I followed this link:
[NB1►DOWNGRADE★UPDATE◄MK2] ★ [NB1 FULL ODIN] ★ [100% SS ROOTED STOCK] ★ [Mar.23.2014]
http://forum.xda-developers.com/showthread.php?t=2663545
to do so. Everything worked fine. I installed Safestrap-v3.71. Then, I downloaded GOOGLE EDITION 4.4.2 BY Danvdh from (http://forum.xda-developers.com/showthread.php?t=2537495) and followed this link:
http://www.teamandroid.com/2014/01/...42-kitkat-danvdh-google-edition-custom-rom/2/
to install Danvdh GE 4.4.2. The post said it needs CWM however I was unable to install CWM on my phone so I assume Safestrap should work the same. I used Safestrap to install the zip and got a successful message.
HOWEVER, when I reboot the phone, it just keeps rebooting (i.e., power on, Samsung logo, black, vibrate and reboot again)!!
Please help!!
Oh, I did not flash Loki doki. Is that causing the problem???
I don't think that rom will work with ss. If you have an i337 I think you need a mdl firmware.
Edit, looking at the rom I know it won't work with ss.
Edit, see this http://forum.xda-developers.com/showthread.php?p=49562527
Sent from my Nexus 5
jd1639 said:
I don't think that rom will work with ss. If you have an i337 I think you need a mdl firmware.
Edit, looking at the rom I know it won't work with ss.
Edit, see this http://forum.xda-developers.com/showthread.php?p=49562527
Sent from my Nexus 5
Click to expand...
Click to collapse
OK... if that doesn't work, is there a pure 4.4.2 Android ROM that works with my phone?
Glad I have Safestrap installed and just bought a microSD card reader. I'll try to flash the ROMs from that list...
jd1639 said:
I don't think that rom will work with ss. If you have an i337 I think you need a mdl firmware.
Edit, looking at the rom I know it won't work with ss.
Edit, see this http://forum.xda-developers.com/showthread.php?p=49562527
Sent from my Nexus 5
Click to expand...
Click to collapse
Oh, just realize by "ss" you mean Safestrap?
Given my phone's current status, is there a way to install this ROM? Flash with stock ROM and try to install CWM?
wangweixun said:
Oh, just realize by "ss" you mean Safestrap?
Given my phone's current status, is there a way to install this ROM? Flash with stock ROM and try to install CWM?
Click to expand...
Click to collapse
Yes, safestrap. You can not install cwm on your device. You can only use ss and touch wiz based roms. You might have to Odin back to mk2 and start over
Sent from my Nexus 5
jd1639 said:
Yes, safestrap. You can not install cwm on your device. You can only use ss and touch wiz based roms. You might have to Odin back to mk2 and start over
Sent from my Nexus 5
Click to expand...
Click to collapse
Thanks. That is sad .
My device won't boot now so Odin is not possible I assume? I'm trying to use ss to install the "I337UCUFNB1 100% Stock Rooted ROM" and start from there. Am I on the right track?
wangweixun said:
Thanks. That is sad .
My device won't boot now so Odin is not possible I assume? I'm trying to use ss to install the "I337UCUFNB1 100% Stock Rooted ROM" and start from there. Am I on the right track?
Click to expand...
Click to collapse
I would flash the all in one tar from from this http://forum.xda-developers.com/showthread.php?p=49687770
Sent from my Nexus 5
jd1639 said:
I would flash the all in one tar from from this http://forum.xda-developers.com/showthread.php?p=49687770
Sent from my Nexus 5
Click to expand...
Click to collapse
Sorry I'm a newbie but...
1. what is that all in one tar for? Is it a ROM?
2. my device won't boot so I could not use Odin. The only thing I can use is SS. Is there a workaround?
wangweixun said:
Sorry I'm a newbie but...
1. what is that all in one tar for? Is it a ROM?
2. my device won't boot so I could not use Odin. The only thing I can use is SS. Is there a workaround?
Click to expand...
Click to collapse
Your device only boots into ss? Can you boot into download mode? Power, home, vol down
Sent from my SAMSUNG-SGH-I727
jd1639 said:
Your device only boots into ss? Can you boot into download mode? Power, home, vol down
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
Actually, I am able to get into download mode.
I'm downloading the full odin tar files file however... I still could not understand what it is. Is it the MK2 ROM?
nvm. Got it. It'll turn my device back to stock image.
If that works, there is a way I can flash a pure 4.4.2 KitKat on my phone? Or "I337UCUFNB1 100% Stock Rooted ROM" is my best bet?
Thanks!!!
wangweixun said:
nvm. Got it. It'll turn my device back to stock image.
If that works, there is a way I can flash a pure 4.4.2 KitKat on my phone? Or "I337UCUFNB1 100% Stock Rooted ROM" is my best bet?
Thanks!!!
Click to expand...
Click to collapse
There is a guide below with all the answers you seek young Android flashing apprentice. Please slow down & read it thoroughly before flashing anything. Reading saves phones! If the method or rom you want isn't posted in the guide, it can't be done on your MK2 S4. All the roms that will work on MK2 firmware are listed as well as the way to flash the listed Kit Kat roms too. I recommend you try the At&t roms 1st instead of the international versions. Please thank the op in the threads that help you. Good luck. :fingers-crossed:
http://forum.xda-developers.com/showthread.php?t=2616221
wangweixun said:
nvm. Got it. It'll turn my device back to stock image.
If that works, there is a way I can flash a pure 4.4.2 KitKat on my phone? Or "I337UCUFNB1 100% Stock Rooted ROM" is my best bet?
Thanks!!!
Click to expand...
Click to collapse
You can't flash any AOSP roms with safestrap, only Touchwiz based ones. Your bootloader is locked so it's impossible for you to flash any vanilla android or google edition roms.
The "I337UCUFNB1 100% Stock Rooted ROM" is basically stock GS4 Touchwiz firmware that is rooted.

[Q] Bootloader unlock Galaxy s4 sgh-i337 4.4.2 kitkat

I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
patstar5 said:
I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
Click to expand...
Click to collapse
You CANNOT install CWM or TWRP. You will need to use SafeStrap recovery. Read up about it, as I have the older Loki bypass and don't need/use towelroot or safestrap.
With safestrap you are limited to flashing Touchwiz based roms. You can flash modems. You CANNOT flash kernels.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
RockRatt said:
You CANNOT install CWM or TWRP. You will need to use SafeStrap recovery. Read up about it, as I have the older Loki bypass and don't need/use towelroot or safestrap.
With safestrap you are limited to flashing Touchwiz based roms. You can flash modems. You CANNOT flash kernels.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
Click to expand...
Click to collapse
So I can't use cyanogenmod, aosp, aopk, or pacman roms?
patstar5 said:
So I can't use cyanogenmod, aosp, aopk, or pacman roms?
Click to expand...
Click to collapse
There's one partially working Google Play edition rom, but otherwise, no.
This makes me truly sad. I was so looking forward to possibly flashing these ROMS and now...I have to get it my time machine and go backwards lol whenever I find the time to figure the downgrading thing out. Sounds to me like I'll be happier when I do find the time.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
There is no way going back to the older bootloader. The only way to go back would be to find an older S4 on eBay etc. with the old BL
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
patstar5 said:
I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
Click to expand...
Click to collapse
All the post below are correct except being able to go back to firmware with an unlocked boot loader.. Install safestrap 3.72 and install recovery. You will get a Twrp recovery .. dont try flashing custom kernels ..It might flash but none of the setting such as overclock etc. will work .nor will you be on that kernel version afterwrds .. I guess the simple answer is no for cwm and aosp roms .. You will be only able too flash custom stock roms
Wifi issues with towelrooted gs4
First off this may not be the right place for this (first time poster), and if so, either please help me in finding the right forum or forgive my ignorance.
I rooted my galaxy s4 today, and I have found that when I am trying to use wifi I am unable to connect to some pages. Using chrome I am unable to load google.com, or google anything directly from the search bar. And the app imgur also doesn't load whilst on wifi, but if I switch to my cell network they load just fine. If I had unlimited data of course this would not be an issue, but that is not the case and therefore I come to this forum and hope that someone can help me out!
My s4 is an at&t i337. I would amazingly, greatly appreciate any help!
Much thanks in advance!
lost recovery with unlocked bootloader
Hello,
longtime flasher here, not as familiar with gs4.
My girl has a sgh-i337 that has been bootloader unlocked since day one. Been on TWRP and slim rom the whole time too.
I was wiping Cache, Dalvik Cache, and System prior to doing a rom update and TWRP glitched out while updating partition after the final wipe operation. Screen went black. Boots to download mode only.Will not boot rom (as system was wiped) but shows the samsung custom unlocked logo. When in download (odin) mode, I see product name: sgh-1337, Current Binary: Samsung Official, System Status: Custom CSB_OEM_LSB: 0x30 Write Protection: enable
universal android toolkit will not show device connected so Installation of custom recovery through toolkit fails. ADB will not show device connected. ODIN will show device connected, though.
To recover with odin, can I flash the I337UCUAMDL from sammobile and retain unlocked bootloader?
Thanks for any and all help.
What is the bootloader version you need to unlock? I have 4.2.2 Red ATT S4, Baseband Version : I337UCUAMF3 / BUILD: JDQ39 , if i was able to unlock how would i go about doing so? I was hoping i could do something with Loki if not? How does Loki work exactly as well?
Congrats, you just voided your warranty. It will be 0x1 instead of 0x0.
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
Just FYI for you guys hijacking the thread. It is usually better for you if you start your own thread. Most people skim these threads and may lose track of who they were helping or give bad info to you thinking they were replying to the original question. Or, just skip the thread if they don't think the OP tiltle interests them.
You will get more direct answers and quicker help if you do. Or try to post here--
http://forum.xda-developers.com/showthread.php?t=2320430
Just trying to get you faster and more accurate responses--:good:
How did you root S4?
patstar5 said:
I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
Click to expand...
Click to collapse
How did you root your galaxy? I've been trying for two days now and no matter what I try to do it never works, fortunately I haven't bricked my phone but I feel like it's only a matter of time! I have a:
Samsung SGH-I337 for AT&T
4.4.2
Baseband Version: I337UCUFNI1
Kernel version: 3.4.0 Sep. 4th
Security software version v1.0 Release 2
th3doorMATT said:
How did you root your galaxy? I've been trying for two days now and no matter what I try to do it never works, fortunately I haven't bricked my phone but I feel like it's only a matter of time! I have a:
Samsung SGH-I337 for AT&T
4.4.2
Baseband Version: I337UCUFNI1
Kernel version: 3.4.0 Sep. 4th
Security software version v1.0 Release 2
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=55537351
Sent from my Nexus 5 using XDA Free mobile app
Using Odin 3.10
jd1639 said:
http://forum.xda-developers.com/showthread.php?p=55537351
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I've tried using other methods I'm not home to try this one out but every time I've connected my phone to Odin the COM Port has always been blue, I've never gotten it to be yellow like I've read in other guides. Any time I've tried to flash when it's blue it's failed. Any suggestions to get it yellow?
th3doorMATT said:
I've tried using other methods I'm not home to try this one out but every time I've connected my phone to Odin the COM Port has always been blue, I've never gotten it to be yellow like I've read in other guides. Any time I've tried to flash when it's blue it's failed. Any suggestions to get it yellow?
Click to expand...
Click to collapse
I believe in Odin 3.09 it is blue I've always used 1.85 where it's yellow. What tar file are you trying to flash?
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
jd1639 said:
I believe in Odin 3.09 it is blue I've always used 1.85 where it's yellow. What tar file are you trying to flash?
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
Click to expand...
Click to collapse
Hmmm. I still don't know why it fails but when I get home I'll have to let you know. I've deleted several after failing. I'm sure I can find them again and I think I still have a few as well so I'll let you know.
CF Auto Root and Towelroot
jd1639 said:
I believe in Odin 3.09 it is blue I've always used 1.85 where it's yellow. What tar file are you trying to flash?
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
Click to expand...
Click to collapse
I've used both CF Auto Root, Towelroot, and Motochopper guides and none of them have worked.
The only file I have on my computer is: philz_touch_6.08.9-jflteatt.tar.md5 as one of the files I used but that didn't work. I actually had already downloaded the files from the article you had linked but I didn't get around to it yet, I'm going to try that method out in about 15-30mins and see what happens.
It worked!
jd1639 said:
http://forum.xda-developers.com/showthread.php?p=55537351
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Followed everything on that post and it worked! I'm rooted!
Though I'm not sure if you know about custom recoveries. I'm having issues with installing any of them and having it work. I am currently trying Safestrap and for some reason it won't install the recovery. It'll go through the process, but the state of the recovery won't change or anything.
I ultimately want to install CM11, but I'm really struggling to find a way that works!
unlocked bootloader.....
patstar5 said:
I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
Click to expand...
Click to collapse
I still can't figure how to install the .apk file from kingroot..? How do you install the file to root it..?

[Q] Geohot's towelroot, what to do next?

Source:
http://forum.xda-developers.com/showthread.php?t=2783157
so i just tried this out. went a lot smoother than i expected. but now i'm kinda scared to do anything else/further.
i was already "rooted" from following this guide:
http://forum.xda-developers.com/showthread.php?t=2663545
am i now able to use ROM Manager or Goo Manager and install custom recoveries?
has anyone already done so and flashed an AOSP-based ROM?
edit: just read over in the General Discussion area...
http://forum.xda-developers.com/showthread.php?t=2783335
i guess i didn't have to use this method since i was already rooted. but still only able to use SafeStrap Recovery. and still only able to flash TW-based ROMs.
does this root method allow for hopefully access to unlocked bootloaders though?
I just used this method as well and it seemed to work. It at least was marked as root in Titanium Backup, which is what I used to remove the bloat apps.
Btw I am on the I337M.
I've been having a lot of terrible reception on this phone, mobile network constantly dropping. My original I337 was fantastic (RIP). Maybe I should try a new modem?
AkiriXx said:
I've been having a lot of terrible reception on this phone, mobile network constantly dropping. My original I337 was fantastic (RIP). Maybe I should try a new modem?
Click to expand...
Click to collapse
can modems even be flashed in SafeStrap? i'm so new to this kind of custom recovery. i don't want to flash anything in there.
mrhomiec said:
can modems even be flashed in SafeStrap? i'm so new to this kind of custom recovery. i don't want to flash anything in there.
Click to expand...
Click to collapse
You can not use rom our goo manager. Safestrap is still the only recovery you can use
Sent from my Nexus 5 using XDA Free mobile app
---------- Post added at 11:16 AM ---------- Previous post was at 11:10 AM ----------
jd1639 said:
You can not use rom our goo manager. Safestrap is still the only recovery you can use
Edit, modems can be flashed in ss
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
You can not use rom our goo manager. Safestrap is still the only recovery you can use
Edit, modems can be flashed in ss
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
i did not know SafeStrap could flash modems.
and i don't know why i thought root = unlocked bootloader. i should definitely have known better. here's hoping to unlocked bootloader soon though!
mrhomiec said:
i did not know SafeStrap could flash modems.
and i don't know why i thought root = unlocked bootloader. i should definitely have known better. here's hoping to unlocked bootloader soon though!
Click to expand...
Click to collapse
Safestrap can flash modems and Touchwiz based Roms. It CANNOT flash kernels. You can check out my modem thread there is some notes about how to flash modems with safestrap.
Root does not equal unlocked bootloader. Even on the first ATT S4's that use the Loki bootloader bypass the locked bootloader is still locked. It is just bypassed and allows for real recoveries that are able to flash ANYTHING.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337

Categories

Resources