Hell People, I am having the hardest time trying to reset my Galaxy s3 Verizon sch-i535 back to factory setting, I keep trying and gives me errors......When trying to flash with odin it completes and gives me the pass but then can't get past the images attached. it always fails on me and says Fail! (Auth) and when I try to install a stock rom from sd card it says E: Signature Fail. Samsung Galaxy s3 logo comes on and then just a black screen.
When trying to flash in Odin to stock rom
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Try the S3 forums. This is the Note 3 forum.
Sent from my SM-N900V using XDA Premium 4 mobile app
How do I move this to s3 forum??
Sent from my ADR6410LVW using xda app-developers app
Related
Good Morning all. An about a week or 2 ago I was asking about a knox and all of the things related of it. Finally I decided to root my mobile (i9505), but unfortunately whenn i connected it and tried flash a recovery with Odin I got this message
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
I know that my partition table is corrupted, but i don't know why. I never before connect my mobile
1) Is it possible to brick my device when i flash a PIT file? I got one from this thread
HTML:
http://forum.xda-developers.com/showthread.php?t=2265477
2) What might to corrupt my Part table? I updated my rom via OTA.
i have a 32 gb n900 phone that with official lolipop that i was put it from sammobile.com and flash it by odin, then i tried 2 do a root with odin but it is not succes so i do it by kingo root
now, i need to flash a xda's developer Rom 2 my mobile by odin but there are a problem in odin to flash recovery !!!
i tried 2 use a varity of recoveries but it is not useful
it (odin) present that the recovery is failed with red and give
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
plz help because every things i did 2 make a recovry is unsuccedes
In download mode does it shows reactivation lockN?
Sent from my GT-N7000
Rosli59564 said:
In download mode does it shows reactivation lockN?
Sent from my GT-N7000
Click to expand...
Click to collapse
yes ??
I just can't seem to find any root method for my galaxy a3 SM-A300FU running on marshmallow 6.0.1.
So if anyone can help it would be very appreciated.
Check out this thread
http://forum.xda-developers.com/showthread.php?p=69290521
Sent from my SM-N910C using Tapatalk
Still can't even install twrp, this is the log file from odin.
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/005> Removed!!
OK I did it. Here is how. I went to chainfires website then I found cf auto root file for my device. I downloaded that then,
flashed it through odin and it was rooted. Once it was rooted I downloaded flashify app to flash twrp recovery but it didn't work,
so I went back to my computer and flashed twrp recovery image through odin. And now it works perfectly.
I am trying to return my phone to stock but I keep getting this error:
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I really need help, it is bricked.
Use this app from your computer, with your phone in download mode. It saved me. I believe it's because you may be trying to flash to a previous version of firmware. http://support-us.samsung.com/VerizonSoftwareUpdateWin
Did you get this fixed?
Sent from my SM-G930V using Tapatalk
This error has happened to me before. Don't use the HOME CSC file, use the other one that wipes your phone. The Home CSC never worked for some reason.
My j5 (sm-j510fn) got pattern-locked n i tried to reset it but no success! Odin cant flash cuz the phone is on "mdm mode" or something and wipes wont working- what should i do?
try using nand erase all in odin
didnt worked bro...
EDIT: weird... cant upload an image of that...
anyway, the log says:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1207)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Erase...
<ID:0/005> ERASE_SECTOR: 0
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
use different firmware.
it isnt possible too body, due to odin refusing listen to me! it seems his hammer got heavier and now nothing is possible for me! cant flash rom/ firmware/ recovery- everything iv done give me a big red FAIL and a message of "MDM MODE, CANT DOWNLOAD" at the phone screen