Suddenly my KJam backlight always turns to low without me doing so, then I have to change it to high, barely can see what I’m doing as it is almost black. This is kept happening especially after I installed Pocketweather. I reinstalled the Rom, it worked fine then suddenly it is back again when I switch the screen off, or automatically it is switched off, the backlight slider I find it at the lowest end.
Why thus is happening, it’s driving me crazy, please help me
yeah me too want to know solution for this too ?
Hi all,
On a number of occasions, I've used Market apps to control the screen brightness, either manually (like a brightness widget) or scheduled (using Timeriffic - a great tool for automatic profile changes throughout the day).
Apparently, these apps are not aware of the correct minimum brightness supported by the Leo, making it too easy to go too low, which essentially disables the display completely.
Touch still works, so if I'm lucky enough to remember the location of the widget/slider/controls, I may be able to turn brightness back up to a "sane" level.
For example, Timeriffic turns the screen off with a brightness level of 10% - 15% is the lowest working setting.
If I'm unable to fix it this way, I'm basically forced to reset. The problem is that Android *remembers* this setting after a reboot, and reapplies it just when the device is vibrated slightly at the "Android" logo animation. Thus, with a black screen, it is impossible for me to unlock the SIM, hard to unlock the screen lock, and virtually impossible to correct the brightness setting. I need to remove my data.img ("hard resetting" Android) and restore what I can from backups.
The problem also seems to occur with the standard screen dimming which occurs at about half time before the "screen off" setting. I can see the display start to dim, then it suddeny turns off. In this case, however, Android of course reverts to normal brightness at the touch of the screen or press of a button.
On a related note, I have experienced (like right now) that brightness range used by Android is much dimmer then normal. That is, using the regular brightness slider in Settings, I can only vary between almost invisible (min) and quite dim (max). Curiously, in this situation, the display can get *much* dimmer than normal, without becoming disabled.
Any ideas on these issues would be most welcome!
Workarounds found later in this thread:
- Shine a bright light on the screen - the graphics are still there if you look really hard. It's not a joke!
- Use Screencast in Droid Explorer to "remote control" your Android
- adb shell "echo 255 >/sys/class/leds/lcd-backlight/brightness"
ugumba said:
Hi all,
On a number of occasions, I've used Market apps to control the screen brightness, either manually (like a brightness widget) or scheduled (using Timeriffic - a great tool for automatic profile changes throughout the day).
Apparently, these apps are not aware of the correct minimum brightness supported by the Leo, making it too easy to go too low, which essentially disables the display completely.
Touch still works, so if I'm lucky enough to remember the location of the widget/slider/controls, I may be able to turn brightness back up to a "sane" level.
For example, Timeriffic turns the screen off with a brightness level of 10% - 15% is the lowest working setting.
If I'm unable to fix it this way, I'm basically forced to reset. The problem is that Android *remembers* this setting after a reboot, and reapplies it just when the device is vibrated slightly at the "Android" logo animation. Thus, with a black screen, it is impossible for me to unlock the SIM, hard to unlock the screen lock, and virtually impossible to correct the brightness setting. I need to remove my data.img ("hard resetting" Android) and restore what I can from backups.
The problem also seems to occur with the standard screen dimming which occurs at about half time before the "screen off" setting. I can see the display start to dim, then it suddeny turns off. In this case, however, Android of course reverts to normal brightness at the touch of the screen or press of a button.
On a related note, I have experienced (like right now) that brightness range used by Android is much dimmer then normal. That is, using the regular brightness slider in Settings, I can only vary between almost invisible (min) and quite dim (max). Curiously, in this situation, the display can get *much* dimmer than normal, without becoming disabled.
Any ideas on these issues would be most welcome!
Click to expand...
Click to collapse
I don't know these app(s) but if they are writing their settings and configured values into a ini or settings file, than you might be able to connect via adb and change the setting by this way.
With tools like Droidexplorer or ADB magic, browsing through the files should be very comfortable and you might find the correct file.
this happens on regular android devices ...i have a couple of them
thatruth132 said:
this happens on regular android devices ...i have a couple of them
Click to expand...
Click to collapse
What happens? That brightness is set too low, essentially disabling the screen, so you're forced to hard reset or perform some root magic? How do you cope with it? Or does it happen that the permitted brightness range is just dimmer than usual?
Btw, until there is no light-sensor support in kernel, you can't use such apps for the brightness
Stills a good advice
I have had the same issue with the brightness range being too low. The max brightness is really dim and the colors don't seem right. That may just be the dimming effect though. If I restart the phone it seems to take care of this. I have not had the screen go below the minimum level and turn off though.
is there a fix for this. i just experienced this problem
I experienced the same with Multicon widgets.. had to delete Android and start over
somebully said:
I experienced the same with Multicon widgets.. had to delete Android and start over
Click to expand...
Click to collapse
Oh wow, not good at all, crap...
so that means if i do that i'll lose everything huh?
Theres no way to restore the factory brightness or factory settings for the android?
aznsHD2 said:
Oh wow, not good at all, crap...
so that means if i do that i'll lose everything huh?
Theres no way to restore the factory brightness or factory settings for the android?
Click to expand...
Click to collapse
As long as you have a working WinMo it should be possible to edit the values of brightness, but I have no idea where this information is stored.
Deleting Android folder and unzipping again is esentially restoring to factory settings.
yea this happens to me all the time, its a *****. it cuts off at exactly 12% for me. what i do is have aldiko(a book reader) on the home screen. if i click on it and open a book i can just swipe on the left side of the screen to adjust brightness. since i know that its on the home screeen on the right side middle, i can usually find my way back to it.
somebully said:
As long as you have a working WinMo it should be possible to edit the values of brightness, but I have no idea where this information is stored.
Deleting Android folder and unzipping again is esentially restoring to factory settings.
Click to expand...
Click to collapse
which means that i'll lose everything such as data correct? new contacts etc. msgs...
any thing on this... isnt their a file in the android folder that i could maybe replace to restore to factory settings.
and could someone post a screen shot of their phone so i know where the numbers for the pin code lockscreen. tryin to get past that, then i can adjust my brightness
LOL I experienced it one time. And I must delete data.img to restore the phone. After this, I don't use any brightness tools (except ones already in the Android build).
If anyone have solution, please point us
Well i was able to get my screen back to normal. lol.
I didnt delete the data.img, i simply copied it and then removed it, started a fresh install, and then just marked on my screen where the numbers were, turned it off, put the old data.img back. Followed my marks, and was able to unlock it and then found the power control widget. And bam! screen back to bright...
This might work for you!
Erm... In similar circumstances I found this worked...
I was trying out different Android builds and I found a screen brightness widget. It had various available levels of brightness, one being 0%. As soon as I selected it I felt pretty stupid as true to it's word it gave me 0% brightness placing me in a similar position to the OP.
My Solution. I used my (very bright) led torch to light the screen. By playing around with the angle and beam width I found I could just make out the on screen graphics enough to re-adjust the brightness level.
Simples!
Just as " Justblair " said .. you can place your device under a very bright light thus you'll be able to see the screen and what it's showing .. idk what build you guys are using but in cyanogen you can adjust the lowest dim level so that any app or widget tries to set the brightness to 0% it's automatically set to your preset, 15% for instance.
I've only faced this problem once
Is it absolutely necessary to flood the main thread with all these useless noob posts?
It really has nothing to do with Android development on HD2 and should be posted in the General section IMO.
kawazaki said:
Just as " Justblair " said .. you can place your device under a very bright light thus you'll be able to see the screen and what it's showing .. idk what build you guys are using but in cyanogen you can adjust the lowest dim level so that any app or widget tries to set the brightness to 0% it's automatically set to your preset, 15% for instance.
I've only faced this problem once
Click to expand...
Click to collapse
Cyanogen allows you a max dim level of 26 - which is too little on the HD2.
In Tasker, 30 is the lowest setting that still provides light. Maybe Cyanogen can be patched for the HD2 in coming builds?
Thanks for the tip on shining a bright light on the screen.
Another tip is to use Droid Explorer's "Screencast" feature, to view and control your Android's screen on your PC desktop. Of course, the brightness setting has no effect here.
Hello
My S5 randomly began flickering with a green screen to the point where I was unable to use my screen. It seems to happen a lot especially when I have the "Auto Brightness" feature on and when it's in a low light environment
I didn't drop the phone , and i tried many solutions , wipe data partition , change the ROM ( to official )
but no solution solve it
PS: I can't make a link from youtube explain my problem by video , but you can search on youtube " Samsung S5 Green flickering screen " to know what exactly the problem is !
cause of this error
"To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!"
Hi!
does your phone sometimes not light the screen when unlock?
Reyse said:
Hi!
does your phone sometimes not light the screen when unlock?
Click to expand...
Click to collapse
yes that's happened often and the phone unlock without any problem, but sometimes the green flickering won't let me unlock the phone
This is a common problem with AMOLED displays. At a certain point when auto brightness or you manually turn the brightness down, the low power involved makes the screen flicker. Try turning off auto brightness and adjusting the sloder until it stops flickering, then you can use apps like Pixel Filter and/or the xposed module Screen Filter to further darken the screen to save battery.
GorfDroid said:
This is a common problem with AMOLED displays. At a certain point when auto brightness or you manually turn the brightness down, the low power involved makes the screen flicker. Try turning off auto brightness and adjusting the sloder until it stops flickering, then you can use apps like Pixel Filter and/or the xposed module Screen Filter to further darken the screen to save battery.
Click to expand...
Click to collapse
is that mean , there is no way to fix it, else than turning off auto brightness ?
awby said:
is that mean , there is no way to fix it, else than turning off auto brightness ?
Click to expand...
Click to collapse
Not that I'm aware of.
awby said:
is that mean , there is no way to fix it, else than turning off auto brightness ?
Click to expand...
Click to collapse
This is a hardware failure. The fix is change screen which can cost as much as a new phone. There are several youtube videos showing that applying hot guns can fix the problem
Hello everybody,
I have this problem since few months:
Sometimes out of nowhere the screen starts flashing (like turning up brightness to 100%) for a split second when I touch it. After a while it stops. I have no idea where it comes from or how to replicate it. Sometimes restarting the device helps, sometimes not.
Automatic brightness is turned off.
Can anyone think of the origin of this problem or how to solve it?
It is a A2017G and on 7.1.1 with A2017GV1.2.0B05 but was the same with the last update (B04?).
Anything I could think of would be SystemUI Tuner, but I only use it to hide the NFC icon.
Thanks!
Try turning off assertive display under display settings
Tebor said:
Try turning off assertive display under display settings
Click to expand...
Click to collapse
Thanks! I turned it off now, hopefully it won't occure anymore.