Hi all,
On a number of occasions, I've used Market apps to control the screen brightness, either manually (like a brightness widget) or scheduled (using Timeriffic - a great tool for automatic profile changes throughout the day).
Apparently, these apps are not aware of the correct minimum brightness supported by the Leo, making it too easy to go too low, which essentially disables the display completely.
Touch still works, so if I'm lucky enough to remember the location of the widget/slider/controls, I may be able to turn brightness back up to a "sane" level.
For example, Timeriffic turns the screen off with a brightness level of 10% - 15% is the lowest working setting.
If I'm unable to fix it this way, I'm basically forced to reset. The problem is that Android *remembers* this setting after a reboot, and reapplies it just when the device is vibrated slightly at the "Android" logo animation. Thus, with a black screen, it is impossible for me to unlock the SIM, hard to unlock the screen lock, and virtually impossible to correct the brightness setting. I need to remove my data.img ("hard resetting" Android) and restore what I can from backups.
The problem also seems to occur with the standard screen dimming which occurs at about half time before the "screen off" setting. I can see the display start to dim, then it suddeny turns off. In this case, however, Android of course reverts to normal brightness at the touch of the screen or press of a button.
On a related note, I have experienced (like right now) that brightness range used by Android is much dimmer then normal. That is, using the regular brightness slider in Settings, I can only vary between almost invisible (min) and quite dim (max). Curiously, in this situation, the display can get *much* dimmer than normal, without becoming disabled.
Any ideas on these issues would be most welcome!
Workarounds found later in this thread:
- Shine a bright light on the screen - the graphics are still there if you look really hard. It's not a joke!
- Use Screencast in Droid Explorer to "remote control" your Android
- adb shell "echo 255 >/sys/class/leds/lcd-backlight/brightness"
ugumba said:
Hi all,
On a number of occasions, I've used Market apps to control the screen brightness, either manually (like a brightness widget) or scheduled (using Timeriffic - a great tool for automatic profile changes throughout the day).
Apparently, these apps are not aware of the correct minimum brightness supported by the Leo, making it too easy to go too low, which essentially disables the display completely.
Touch still works, so if I'm lucky enough to remember the location of the widget/slider/controls, I may be able to turn brightness back up to a "sane" level.
For example, Timeriffic turns the screen off with a brightness level of 10% - 15% is the lowest working setting.
If I'm unable to fix it this way, I'm basically forced to reset. The problem is that Android *remembers* this setting after a reboot, and reapplies it just when the device is vibrated slightly at the "Android" logo animation. Thus, with a black screen, it is impossible for me to unlock the SIM, hard to unlock the screen lock, and virtually impossible to correct the brightness setting. I need to remove my data.img ("hard resetting" Android) and restore what I can from backups.
The problem also seems to occur with the standard screen dimming which occurs at about half time before the "screen off" setting. I can see the display start to dim, then it suddeny turns off. In this case, however, Android of course reverts to normal brightness at the touch of the screen or press of a button.
On a related note, I have experienced (like right now) that brightness range used by Android is much dimmer then normal. That is, using the regular brightness slider in Settings, I can only vary between almost invisible (min) and quite dim (max). Curiously, in this situation, the display can get *much* dimmer than normal, without becoming disabled.
Any ideas on these issues would be most welcome!
Click to expand...
Click to collapse
I don't know these app(s) but if they are writing their settings and configured values into a ini or settings file, than you might be able to connect via adb and change the setting by this way.
With tools like Droidexplorer or ADB magic, browsing through the files should be very comfortable and you might find the correct file.
this happens on regular android devices ...i have a couple of them
thatruth132 said:
this happens on regular android devices ...i have a couple of them
Click to expand...
Click to collapse
What happens? That brightness is set too low, essentially disabling the screen, so you're forced to hard reset or perform some root magic? How do you cope with it? Or does it happen that the permitted brightness range is just dimmer than usual?
Btw, until there is no light-sensor support in kernel, you can't use such apps for the brightness
Stills a good advice
I have had the same issue with the brightness range being too low. The max brightness is really dim and the colors don't seem right. That may just be the dimming effect though. If I restart the phone it seems to take care of this. I have not had the screen go below the minimum level and turn off though.
is there a fix for this. i just experienced this problem
I experienced the same with Multicon widgets.. had to delete Android and start over
somebully said:
I experienced the same with Multicon widgets.. had to delete Android and start over
Click to expand...
Click to collapse
Oh wow, not good at all, crap...
so that means if i do that i'll lose everything huh?
Theres no way to restore the factory brightness or factory settings for the android?
aznsHD2 said:
Oh wow, not good at all, crap...
so that means if i do that i'll lose everything huh?
Theres no way to restore the factory brightness or factory settings for the android?
Click to expand...
Click to collapse
As long as you have a working WinMo it should be possible to edit the values of brightness, but I have no idea where this information is stored.
Deleting Android folder and unzipping again is esentially restoring to factory settings.
yea this happens to me all the time, its a *****. it cuts off at exactly 12% for me. what i do is have aldiko(a book reader) on the home screen. if i click on it and open a book i can just swipe on the left side of the screen to adjust brightness. since i know that its on the home screeen on the right side middle, i can usually find my way back to it.
somebully said:
As long as you have a working WinMo it should be possible to edit the values of brightness, but I have no idea where this information is stored.
Deleting Android folder and unzipping again is esentially restoring to factory settings.
Click to expand...
Click to collapse
which means that i'll lose everything such as data correct? new contacts etc. msgs...
any thing on this... isnt their a file in the android folder that i could maybe replace to restore to factory settings.
and could someone post a screen shot of their phone so i know where the numbers for the pin code lockscreen. tryin to get past that, then i can adjust my brightness
LOL I experienced it one time. And I must delete data.img to restore the phone. After this, I don't use any brightness tools (except ones already in the Android build).
If anyone have solution, please point us
Well i was able to get my screen back to normal. lol.
I didnt delete the data.img, i simply copied it and then removed it, started a fresh install, and then just marked on my screen where the numbers were, turned it off, put the old data.img back. Followed my marks, and was able to unlock it and then found the power control widget. And bam! screen back to bright...
This might work for you!
Erm... In similar circumstances I found this worked...
I was trying out different Android builds and I found a screen brightness widget. It had various available levels of brightness, one being 0%. As soon as I selected it I felt pretty stupid as true to it's word it gave me 0% brightness placing me in a similar position to the OP.
My Solution. I used my (very bright) led torch to light the screen. By playing around with the angle and beam width I found I could just make out the on screen graphics enough to re-adjust the brightness level.
Simples!
Just as " Justblair " said .. you can place your device under a very bright light thus you'll be able to see the screen and what it's showing .. idk what build you guys are using but in cyanogen you can adjust the lowest dim level so that any app or widget tries to set the brightness to 0% it's automatically set to your preset, 15% for instance.
I've only faced this problem once
Is it absolutely necessary to flood the main thread with all these useless noob posts?
It really has nothing to do with Android development on HD2 and should be posted in the General section IMO.
kawazaki said:
Just as " Justblair " said .. you can place your device under a very bright light thus you'll be able to see the screen and what it's showing .. idk what build you guys are using but in cyanogen you can adjust the lowest dim level so that any app or widget tries to set the brightness to 0% it's automatically set to your preset, 15% for instance.
I've only faced this problem once
Click to expand...
Click to collapse
Cyanogen allows you a max dim level of 26 - which is too little on the HD2.
In Tasker, 30 is the lowest setting that still provides light. Maybe Cyanogen can be patched for the HD2 in coming builds?
Thanks for the tip on shining a bright light on the screen.
Another tip is to use Droid Explorer's "Screencast" feature, to view and control your Android's screen on your PC desktop. Of course, the brightness setting has no effect here.
Related
As far as the automatic backlight setting goes, it is my understanding that the phone should check how bright (or dark) it is, and adjust the display brightness accordingly (brighter when out in the sun, darker when sitting indoors / dark rooms).
However, it seems to me it just sets the backlight at ~40% and that's it. I went out into the sun with my HD2, and the brightness didn't change and I had trouble seeing what was on the screen.
Is there some kind of way I could test, if the light sensor is working? Or is this setting simply badly designed and I should set the brightness myself?
I'm currently running latest Energy ROM (23569 Cookie May 09) but it was the same with the stock ROM, so I don't think it's related.
PS. A little side question, if I may; if I perform task 29 before flashing... do I still need to do a hard reset after flashing a new ROM?
...in the very least... are there any apps that make use of the light sensor?
Well I know the acctualy percentage in the settings never changes when its on auto (atleast not for me)
But I can clearly tell a difference between being in a dark room and the backlight being on low
to being in the sun and it on max.
Ive also never had trouble reading the screen, the screen is always plenty bright enough.
Prehaps you've got a bad one?
Shaamaan said:
...in the very least... are there any apps that make use of the light sensor?
Click to expand...
Click to collapse
I know an app that can measure the amount of light in lumers.
lonelykatana said:
I know an app that can measure the amount of light in lumers.
Click to expand...
Click to collapse
Care to share the name of that app?
Also, it's difficult for me to say if the screen is busted or not. On max brightness (as opposed to the automatic setting) it's a lot more comfortable to look at in the sun, albeit indoors it's OK on any setting really.
EDIT: I don't suppose the automatic setting can be tweaked for better performance via some registry changes?
Shaamaan said:
Care to share the name of that app?
Also, it's difficult for me to say if the screen is busted or not. On max brightness (as opposed to the automatic setting) it's a lot more comfortable to look at in the sun, albeit indoors it's OK on any setting really.
EDIT: I don't suppose the automatic setting can be tweaked for better performance via some registry changes?
Click to expand...
Click to collapse
I think it's called Lumos.
Try searching for it.
You certainly can test it. Just cover the light sensor (upper left corner above the screen) with something. I don't recommend thumb, as you might press 'start' button. You will also need any application with white background.
The brightness should clearly drop.
Auto only sets the brightness from 20% to 60% (or so it seems). But the effect is clearly visible.
Dr.Sid said:
You certainly can test it. Just cover the light sensor (upper left corner above the screen) with something. I don't recommend thumb, as you might press 'start' button. You will also need any application with white background.
The brightness should clearly drop.
Auto only sets the brightness from 20% to 60% (or so it seems). But the effect is clearly visible.
Click to expand...
Click to collapse
No change at all.
I'll restore the stock ROM to see if it's a firmware issue, and I'll check that Lumos application.
EDIT: Lumos clearly detects light changes and works well. Seems it's either something to do with Energy ROM after all or possibly I'm just blind and I can't see any changes. I'm still going to check the stock ROM, just to be safe.
BTW, once more, can someone tell me quickly if hard resets are needed after task 29?
EDIT 2: OK, it DOES work after all, I'm just blind; the change however, on the automatic settings, is minimal. I actually had to put the phone under a light-bulb, as covering the sensor didn't really work. I wonder if it should be calibrated like the g-sensor...
night time
i think the day time brightness is fine but the night time setting is far to bright. i would love for this to be customizable as well
rdbthrgnaRDg
Dr.Sid said:
Auto only sets the brightness from 20% to 60% (or so it seems).
Click to expand...
Click to collapse
Can this range be increased?
For indoor use the auto-adjust works fine for day/evening/night, but outside I always need to turn off the auto-adjust, so it can go to 100%. When back indoor again, then switch to auto again and so on ... and so on ... and ...
Just installed .NET CF + Lumos and will see how it works out.
.NET CF for laptop and automatic install to HD2 via ActiveSync:
microsoft.com/downloads/details.aspx?FamilyID=E3821449-3C6B-42F1-9FD9-0041345B3385&displaylang=en
Latest Lumos v10 RC2:
forum.xda-developers.com/showthread.php?t=450318
I installed a battery booster app from the market, and it had an option to dim the screen, it was on 11%, well i tried to adjust it, and i guess i went way to far and it turned my screen black, i cant see nothing.
im on the Darkstone build.
is there a way to either delete that app or what, i know the phone works as i feel the vibration from me sliding it to unlock from home screen.
aznsHD2 said:
I installed a battery booster app from the market, and it had an option to dim the screen, it was on 11%, well i tried to adjust it, and i guess i went way to far and it turned my screen black, i cant see nothing.
im on the Darkstone build.
is there a way to either delete that app or what, i know the phone works as i feel the vibration from me sliding it to unlock from home screen.
Click to expand...
Click to collapse
The LCD still light up but very dim, so try going into a dark room and wake up the phone. Then you will be able to see the contain on your phone.
10507 said:
The LCD still light up but very dim, so try going into a dark room and wake up the phone. Then you will be able to see the contain on your phone.
Click to expand...
Click to collapse
no its literally black, i cant see anything.
aznsHD2 said:
no its literally black, i cant see anything.
Click to expand...
Click to collapse
Not even in a totally dark room?
10507 said:
Not even in a totally dark room?
Click to expand...
Click to collapse
Like i said it is BLANK. seriously blank. its not dim or nothing.
Is there a way to restore the brightness on here, because i cant see anything im doin on it.
what you can try to do is, grab a friends phone and try to immitate the same touches on both devices, the best way to do it is by unlocking it, pressing the menu key, click on the corner to make sure u go to the settings, scroll all the way up and find your way to "display" tipically the 4th (or 5th in my case because i have cyanogen mod) and brightness (should be the one at the top) and just try to drag ur finger from left to right to increse it (as it should over pass any 3rd party app) and see if it works, but..... keep in mind these things dependeding on what phone you use to guide you....
screen size
DPI scale
sense??? or not! as settings are different
and other things, also..... when you unlock it make sure its on the home screen
i also believe if you go outside you can see the screen a little bit under the sun, but not completely sure
hope this helps, oh and by the way, if you have a build based on sense go to a sprint store and use an EVO lol, or if u have stock froyo grab a nexus one from a friend and use that (but like i said before, keep in mund the screen size)
yea thats what i was tryin to do. no luck.
I had this problem twice and rejoice, I have a solution!
Simply download "DroidExplorer" for windows.
Boot your phone in android.
Once booted (when your screen turns black), plug in USB, and launch DroidExplorer.
In DroidExplorer, look for the "Screencast" icon (little android icon).
Run that, you will see your screen. Reset brightness to a normal level.
You are saved
aznsHD2 said:
I installed a battery booster app from the market, and it had an option to dim the screen, it was on 11%, well i tried to adjust it, and i guess i went way to far and it turned my screen black, i cant see nothing.
im on the Darkstone build.
is there a way to either delete that app or what, i know the phone works as i feel the vibration from me sliding it to unlock from home screen.
Click to expand...
Click to collapse
When this happens, try shining a bright light on the screen, make sure the device is woken up (i.e. press a hard button) and view your screen from different angles. Even if the backlight is completely off, the LCD display is still active and the graphics elements just about visible.
With this method, you should be able to make enough of your screen to navigate to the brightness settings.
Screencast in Droid Explorer (for your PC) is also a good last measure.
Most apps that control brightness has this problem on HD2, so be careful about going too low in all of them. In Tasker, for example, 30 is the lowest setting that works.
Even the standard screen dimming that occurs a few seconds before screen timeout is not calibrated correctly. In all Android builds/kernels I have tried, the backlight is turned off when it should be just dimmed. Cyanogen(mod) has a setting for the dim level, but the maximum you can use is 26, which still turns off the backlight.
Curiously, sometimes (very seldom) after waking my phone up from standby, the backlight is in a much dimmer state than usual. When sliding the standard brightness from min to max, the actual brightness range varies from barely visible (but still on) to the regular dimmest level. So the device *can* support incredibly dim levels, but I've have found no way of getting into this state predictably. It has happened only 3-4 times over the past 2 months. A reboot fixes it, but I've also gotten out of this state after a locking/unlocking cycle.
So there seems to be several layers to the backlight brightness:
- the actual hardware (which supports much lower brightnesses than we're usually allowed access to)
- the Android API (which probably is the layer turning backlight off below 30, and which occasionally is fooled into using a much dimmer range than usual)
- whatever app providing the GUI (usually showing a range of 0-100% or 0-255).
Does anyone know if there's a reason for the threshold? Is it somehow risky for the LCD display hardware to be very dim?
I find that my device have some brightness change in the display,many times i'm reading and see the screen do some dimming the screen lower down the brightness and go back after like 30 seconds to the normal bright,I have enable the Auto screen power but i try desable and the result are the same.some help please
Probably nothing you can do and it will just never work properly. Seems like the Note has the same strange auto brightness behaviour as the Nexus One - it doesnt work right. Must be some problem with Android OS? I just had to accept the crappy touch screen problems with the N1 and you'll have to just accept that your brightness is screwed up.
Why even include these features if it doesnt work right? Or why not just be honest and tell consumers that the feature has glitches? Why not steal some programming from Apple - never had an issue with iPhone auto brightness.
I still will probably get this phone - but I think it's ridiculous that a $700+ device has these auto brightness/screen issues reported here.
wonsanim said:
I find that my device have some brightness change in the display,many times i'm reading and see the screen do some dimming the screen lower down the brightness and go back after like 30 seconds to the normal bright,I have enable the Auto screen power but i try desable and the result are the same.some help please
Click to expand...
Click to collapse
Read this thread:
http://forum.xda-developers.com/showthread.php?t=1336187
When I'm in a light room the screen goes brighter but if I walk into a darker room, the screen doesn't dim unless I lock and then unlock the screen.
Anyone else having similar issues?
Yep got the same here. Thought I had a faulty ambient light sensor but obviously not.
Sent from my SM-G935F using Tapatalk
Just tried it by covering the light sensor to make sure, no problem here (G935F). My only concern related to brightness is that the s7 just has auto brightness, but no adaptive brightness.
Uncheck the auto box and recheck. Then don't touch the slider. It's usually because in marshmallow the slider moves with the auto bright and most people touch it which makes it hold position.
jackdforme said:
Uncheck the auto box and recheck. Then don't touch the slider. It's usually because in marshmallow the slider moves with the auto bright and most people touch it which makes it hold position.
Click to expand...
Click to collapse
There seems to be a bug somewhere still. I just tried to move the slider while auto brightness is ticked and to cover the light sensor afterwards again and it still worked and to my surprise it even took into account that I lowered the brightness and took also a lower brightness at the covered state and took my initial setting after uncovering, pretty nice, so there is indeed still adaptive brightness. After ticking und unticking auto it went back taking the default steps for brightness as before.
Having the same issue here
Definately not touched the slider.
Also, I have tested the light sensor and it appears to work fine so definately a software issue. Though I imagine we will see some software updates to fix bugs shortly after the official release date.
So you can adjust the slider with the box checked and get various levels of auto? Does it learn?
jackdforme said:
So you can adjust the slider with the box checked and get various levels of auto? Does it learn?
Click to expand...
Click to collapse
Yes.
I can't tell for sure, when I change further steps the previous seems to stick, at least to some extend so there is a logic behind it, but I can't tell for sure if it really is based on each step and sets it accordingly or if it's just changes the range it operates in. Anyways I'm a happy camper.
Also, I could reproduce the device not changing the brightness, when I put it to full at darkness it won't move anymore in auto. But as soon as I lower it again it will also change accordingly again, maybe at those with the stuck brightness the min brightness is only raised, but not lowered anymore, but just an assumption and doesn't help anyone atm unfortunately.
Use lux in play store
Sent from my SM-N920W8 using Tapatalk
https://play.google.com/store/apps/details?id=com.velis.auto.brightness
This is the first Galaxy phone I had, that Auto brightness actually works the way I like it.
It seems to be working fine now. It just takes a few seconds for the screen to dim (maybe I was being impatient).
After testing it further it's actually really good auto brightness.
It works, just takes some time to adjust to the lighting. Maybe the default settings are set to a certain time. Maybe with root we can adjust this..
AngioNicholai said:
It works, just takes some time to adjust to the lighting. Maybe the default settings are set to a certain time. Maybe with root we can adjust this..
Click to expand...
Click to collapse
It seems to only do it quickly when the device is lay down (as 954wrecker said). Maybe Samsung did that so it doesn't annoy you when using your phone.
this is definitely a bug imo... the auto brightness doesn't change for me either...
CuBz90 said:
When I'm in a light room the screen goes brighter but if I walk into a darker room, the screen doesn't dim unless I lock and then unlock the screen.
Anyone else having similar issues?
Click to expand...
Click to collapse
I also have an auto briteness issue, when I disable AutoBrite and set it manually about half my apps override the setting and enable AutoBriteness in the app's screen usually dimming the screen? SpadesFree one example and I do not see an override in the app.
Confimed that I'm having same issue, auto brightness not adjusting and slider not movingoing. Have to move it manually
Same issue. It needs to be fixed manually by editing services.jar (root needed)
Nothing else will work. None of google play apps will help with that issue. Does not matter what you do, it will always dimming if you don't fix it in framework.jar
Try it out: http://forum.xda-developers.com/s7-edge/development/auto-brightness-bug-try-fix-t3339858
Hi everyone
I want to share a workaround to all of us who owns a defective S5
Symptom: You unlock your phone and it doesn't show anything. Actually, the phone is working. Capacitive buttons light up and you may heard some activity in the phone
Your phone has a defective screen. There are a lot S5 which have this problem, according to several forums. After several tries, unlock and lock over and over, the screen light up and you are able to use your phone. The problem is when you receive a call and you want to know who is calling you, the screen doesn't illuminate and you won’t be able to know who is.
Here's a workaround which makes your powerful S5 usable and take out from your drawer.
Solution:
The more effective way to fix it is: change defective screen! But sometimes it could cost as much as a new phone, or simply you can't afford it, and it's better to change your phone instead, and you put your S5 in a drawer.
The technical explanation of this problem is: Screen doesn't receive enough electrical current at low brightness levels (maybe the flex is defective, get old, etc)
Most probably the wake up problem exist together with screen flicker at low brightness levels
The wake up problem rises up more in dark environment, when light sensor make low bright screen
The lock screen light up screen, with a dim effect: when you lock the phone, it slowly turn screen off, and when you unlock, it make and effect of dim screen.
When you are is in dark environment, the effect is very slow, preventing the screen illuminate because the technical problem explained before.
When you are in very light environment, you lock screen and sensor light make the screen very brilliant and chances are you defective phone wakes up correctly.
We can use an app which give us complete control over brightness subsystem. I use an app called Velis AutoBrightness:
Once installed from Play Store, it shows a Setting Wizard. Follow the instructions. Below are some notes
• 1/7: Welcome Screen
• 2/7: How bright... Most probably is your phone always have flicker in low brightness. Choose "AMOLED" or "AMOLED bright". By the way choosing any one of those cure always minimum brightness failure!
• 3/7: Choose High sensitivity
• 4/7: On, if you want additional brightness when charging. Irrelevant for this thead. Choose your favorite setting
• 5/7: Same of 4/7
• 6/7: Choose enable: That enable the app
• 7/7: Some additional notes: Press Done
Now important settings: go to Menu > Settings > General: Settings Mode > Advanced
Service Activation settings:
• Disable system handler > ON: When you use Power saving mode, you surely noted screen flicker, which is very annoying, and make unusable power saving mode. By set this ON: Android doesn't set screen too dim; instead Velis have a minimum of brightness set by Wizard 2/7. (Surely you find out that you avoid screen flicker, by setting autobrightness off and slider in 8-10%)
Sensors settings:
• Screen-on sensor value override: Set this value to 30000. Read below this post if you want technical explanation of this setting
After you establish these settings, you'll be able to unlock your phone all the time!
This is the trick: When you unlock your phone, you'll note that the screen is very bright (because Screen-on to 30000) and quickly adjust to the environment light. The failure is that electrical current to screen is defective, and when exterior light is dark, the screen make a dim effect and doesn't light up.
Note to Marshmallow users:
• This app make use of Screen overlay permisions: And marshmallow is very restrict with this kind of app. This is specially true when you are installing an app. All you have to do is deactivate the app in notification screen: press "OFF" button, adjust system brightness upper enough to not flicker the screen, install your app, and activate Velis Autobrightness again
• Because of Doze mode, wake up from this mode may avoid your screen light up, the first time you use your phone. Let 10-15 seconds your phone wake up, lock again, and unlock again, and velis will make its work!
I hope this post make your smartphone usable. I barely apply this trick to two phones, but I think this is a good workaround!
I used this app & the flickering is still available
What worked for me is downgrading the firmware on my g900f all the way back to Android 4.0. My phone came with version 5.0 and I noticed the problem only after I kept installing samsung's system updates. Will report if the problem starts up again but I'm running rooted and running nougat just fine so I don't see a reason to keep upgrading the firmware.
Edit: nevermind, this didn't work
Reyse said:
The technical explanation of this problem is: Screen doesn't receive enough electrical current at low brightness levels (maybe the flex is defective, get old, etc)
Click to expand...
Click to collapse
Does anyone know for sure if it's the flex cable or some capacitors? I notice only the lower half of my screen flickers.. I bet there's a simple electrical fix for it instead of replacing the whoooole display
fbs said:
Does anyone know for sure if it's the flex cable or some capacitors? I notice only the lower half of my screen flickers.. I bet there's a simple electrical fix for it instead of replacing the whoooole display
Click to expand...
Click to collapse
Hello,
Have you change jour battery? If it s old it could cause some issues...
But try to buy a genuine one, I think that your battery must be old now.
Bye
cedouic said:
Hello,
Have you change jour battery? If it s old it could cause some issues...
But try to buy a genuine one, I think that your battery must be old now.
Bye
Click to expand...
Click to collapse
it doesn't make any sense. the lower half of the screen flickers in green even on charger
fbs said:
it doesn't make any sense. the lower half of the screen flickers in green even on charger
Click to expand...
Click to collapse
I noticed that screen only flickers at low brightness when using Boeffla kernel for LOS14 and others based on it.
No issue for the same device with LOS or Stock based kernels.
zlazaar said:
I noticed that screen only flickers at low brightness when using Boeffla kernel for LOS14 and others based on it.
No issue for the same device with LOS or Stock based kernels.
Click to expand...
Click to collapse
you're wrong
I was using los16 with stock kernel for months with flicker everyday
fbs said:
you're wrong
I was using los16 with stock kernel for months with flicker everyday
Click to expand...
Click to collapse
+1 to that , i even went back to stock and the screen flicker appeared and such issues are well known already with samsung amoled panels back in 2014-even some panels from 2018 . So def not kernel related.
I was using los 15.1 and this problem got worse. The phone was barely usable as mentioned by the op. In my case, the screen would start flickering below 60%. Then I switched back to stock marshmallow. I noticed that 100% brightness in los 15.1 is actually only about 70% in the stock rom.
I have been using the phone at 80% brightness for some weeks now and the problem has significantly reduced. But not completely gone, it's much much better. Also, you might want to avoid using dark wallpapers.