Convert to i9500? - Sprint Samsung Galaxy S 4 Q&A, Help & Troubleshoot

A friend of mine got a Sprint S4 but he wishes to use it with a GSM Carrier.
First couple things I noted are:
1) No SIM Card Contact Management, had to use an App to copy all to phone
2) Cannot find GSM APN settings to manually enter
Is it possible to flash a stock International i9500 ROM over this to alleviate the issues with using a mainly CDMA version?

Technoboi said:
A friend of mine got a Sprint S4 but he wishes to use it with a GSM Carrier.
First couple things I noted are:
1) No SIM Card Contact Management, had to use an App to copy all to phone
2) Cannot find GSM APN settings to manually enter
Is it possible to flash a stock International i9500 ROM over this to alleviate the issues with using a mainly CDMA version?
Click to expand...
Click to collapse
I do not believe you can flash an international ROM to this phone unless you want a pretty paperweight. But there are some tutorials to unlock your SIM to be able to use on other carriers, here is where I'd start. However if he's on a Knox bootloader I think the chance is next to zero for using it on GSM because you have to 'go back' to MDC to do some required stuff.

If he wanted to use a gs4 on a GSM network he should have gotten a GSM version not a CDMA
Sent from my SPH-L720 using Tapatalk

It is actually already unlocked as he can use Voice etc just a bit tricky to get the APN settings to work for 3G...

Related

[Q] Flashing roms

Hi,
I have SGH-M919V and its unlocked.
I am on Bell and want to use LTE. But this model has LTE disabled. when i enable it, cant make phone calls.
I cant seem to flash T mobile modem via odin. there is this secure boot issue. the AUTH: Fails.
I was thinking of installing Bell SGH-I337M rom on my phone. Is that possible? If so, how do I go about doing it?
Thanks!
Since you have a T-Mobile variant you should ask in the sgs4 tmobile forum...
However your problem with lte/phonecalls is likely just an APN issue
To further assist we would need to know which carrier you are using the device on
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
mg2195 said:
Since you have a T-Mobile variant you should ask in the sgs4 tmobile forum...
However your problem with lte/phonecalls is likely just an APN issue
To further assist we would need to know which carrier you are using the device on
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
Hey. thank you for the reply, I really appreciate it.
I've been asking a lot there. No one is answering.
Please help me out, please.
My phone is Canadian variant, originally from WindMobile - SGH-m919V. Wind uses Tmobile freq. = 1700/2100 (AWS) only. No LTE.
I got it unlocked two days ago, and switched over to Bell carrier. Bell uses the other freq and LTE.
When I do force LTE by *#2263# - and enable all LTE, i get LTE speeds. But NO calling or texting. this is with the original Windmobile stock rom. No modification. No root.
I tried to flash Tmobile modem via odin 3.07, didnt work. I used the phone button to load the modem.bin. It gave me AUTH: Fail, secure check fail.
I agree, wrong forum, but we are here to please....
if you have a M919V then you would flash the rom you want, before you boot, flash a tmo m919V kernel, it will boot, manually add your apn settings for your device, it will work with data/wifi/calls.
Good luck....
Hi, im sorry for posting in this forum.
so if I want to flash the bell rom - I337M stock original rom , how do I flash it without booting??
And then how would I flash the tmobile kernel so then I can boot??
I dont mind keeping my current rom - wind stock. But, I want to be able to use LTE like how tmobile has pentaband 3g plus lte.
:/ .

[Q] WIND Mobile Galaxy Note 3 SM-N900W8

First time forum user looking for some answers and a bit of help so thanks in advance for anything you can provide!
I just bought a Samsung Galaxy Note 3 from WIND Mobile in Canada. The model number was SM-N900W8. It seems although carriers know the device has the required bands, they limit listing them on their website if they do not support them and go one step further by having Samsung block the bands through some type of software cripple.
My concern is I use WIND Mobile when local and Telus Mobility when in fringe areas which WIND Mobile does not cover. Prior to buying this device from WIND outright, I confirmed with Samsung live chat support this specific model from WIND will support LTE on Telus. I was told I must first activate the device on WIND and they once I unlock the device, I can configure the Telus APN settings for use on the Telus network. When I do this, I get a max speed of 3G and in the network connections, it does not show: LTE/WCDMA/GSM (auto connect) but instead, the 3 original modes which you can select when on WIND Mobile: WCDMA/GSM (auto connect), WCDMA only and GSM only.
It seems as if the unlock and APN settings are the first 2 parts but in order for LTE to work, you must disable the cripple which Samsung has implemented for it's distribution to WIND Mobile since they do not support that frequency or radio band. My concern is it looks as if this must be done through a root or flash and I hear about phones getting bricked. I paid a lot of money for the device and cannot afford to damage it so do not know what options I have.
If I do enable LTE through a flash and then get an OTA Samsung update, will this remove the flash? How must I go about getting LTE enabled permanently without issue or is this not possible? Thank you for the help!
Hi fellow Windman
just follow this easy guide http://forum.xda-developers.com/showthread.php?t=2471340
everything is self explanatory, including LTE
AllGamer said:
Hi fellow Windman
just follow this easy guide http://forum.xda-developers.com/showthread.php?t=2471340
everything is self explanatory, including LTE
Click to expand...
Click to collapse
Thank you so much. I will follow this guide word for word but is there any risk of bricking my phone like I have read so much about? The last thing I want to do is mess something up and have a paperweight.
If I root the device as suggested and receive an OTA notification from Samsung to update the software, will this lock everything again and make me go through the procedure all over again or will it be permanently enabled? Thanks!
AllGamer said:
Hi fellow Windman
just follow this easy guide http://forum.xda-developers.com/showthread.php?t=2471340
everything is self explanatory, including LTE
Click to expand...
Click to collapse
So, I rooted the device and assume it was successful since I have the SU (Super User) App installed. I ran the TWRP file which I assume is the OS which enables all the crippling Samsung initially implemented when releasing this phone to WIND Mobile but the problem still stands. I have entered all the correct APN settings for Telus yet it still only provides a 3G connection. Have I done something wrong and can any of you gurus familiar with rooting and updating a custom OS provide some insight. Thanks!
I think I'm worse than a noob. At least they can figure this stuff out! I followed the quick root steps and the twrp steps but was I supposed to do something else to enable LTE? The phone is definitely rooted and has the SU App installed. TWRP just seems like a program which allows installation of a custom ROM directly from the device but I may be wrong. My concern is the TWRP file I downloaded looks as if it's a tar file which the phone loads allowing HSPA and LTE capability. If so, it did not work on my WIND device.
You can't get the OTA if you have custom recovery installed. I.e. TWRP or CWM. You gotta wait for custom roms. I don't know about the lte thing
Sent from my Nexus 4 using XDA Premium 4 mobile app
cellrama said:
I think I'm worse than a noob. At least they can figure this stuff out! I followed the quick root steps and the twrp steps but was I supposed to do something else to enable LTE? The phone is definitely rooted and has the SU App installed. TWRP just seems like a program which allows installation of a custom ROM directly from the device but I may be wrong. My concern is the TWRP file I downloaded looks as if it's a tar file which the phone loads allowing HSPA and LTE capability. If so, it did not work on my WIND device.
Click to expand...
Click to collapse
yea you're totally wrong here man... not sure how to enable lte capability, but wind's network is hspa+ already so that's enabled.
i do know you have to unlock it, likely with a sim unlock code or getting someone to unlock it, but after that, the theory is, that it should work.....
WIND is 4G and I have unlocked the device already. I am using a Telus SIM card and have correctly entered the Telus APN settings for LTE but it does not show LTE as a network mode which I can select. Seems to me Samsung has crippled this band since WIND does not support it. Since I have rooted the device, which I probably didn't need to do, I was hoping to find a flash which will permanently enable the LTE so it will function on Telus.
To use Telus LTE you need to switch to the Telus SIM card
then it should read the Telus APN from it, if not you can enter the Telus LTE APN and it should use it
AllGamer said:
To use Telus LTE you need to switch to the Telus SIM card
then it should read the Telus APN from it, if not you can enter the Telus LTE APN and it should use it
Click to expand...
Click to collapse
I have done this already. The steps followed to date are as follows:
Purchased my WIND Mobile Galaxy Note 3 (model: SM-N900W8)
Unlocked the device through cellunlocker.net for 32.99 USD
Placed my Telus SIM into the device and it read the details. I was able to call and text without issue but did not have data connectivity. Contacted Telus and received the Telus LTE APN details and entered this information. Unfortunately, the network mode only shows 3 options: WCDMA/GSM (auto-connect), WCDMA only and GSM only.
There should be a fourth option for LTE capability but this is not displaying. I rooted my device and followed the TWRP step thinking this TWRP file was the rom to enable the LTE capability which seems to be locked but this is not the case. I am way off here but know it's probably something simple which I am missing!
yes, the 4th option for the LTE needs to flash another modem
i got it working here http://forum.xda-developers.com/showpost.php?p=46259468&postcount=39
find any of the Note 3 threads with flash-able modems, and flash the one from Puerto Rico that enables the LTE
AllGamer said:
yes, the 4th option for the LTE needs to flash another modem
i got it working here http://forum.xda-developers.com/showpost.php?p=46259468&postcount=39
find any of the Note 3 threads with flash-able modems, and flash the one from Puerto Rico that enables the LTE
Click to expand...
Click to collapse
To confirm your above statement, am I going to the following page and downloading the firmware for Puerto Rico?
http://www.samsungis.com/Firmwares/SM-N900W8.html
or must I locate a thread to download just modem firmware and then follow the same ODIN instructions as I did with the other files?
Thanks!
cellrama said:
To confirm your above statement, am I going to the following page and downloading the firmware for Puerto Rico?
http://www.samsungis.com/Firmwares/SM-N900W8.html
or must I locate a thread to download just modem firmware and then follow the same ODIN instructions as I did with the other files?
Thanks!
Click to expand...
Click to collapse
you only need the modem, you don't need to flash an entire ROM.
there was a reference topic with a list of downloads for all different modems for the Note 3 in the General section of this Note 3 portion of the forum. http://forum.xda-developers.com/showthread.php?t=2475714
they are still uploading all the different models, you you might want to wait a bit, or you can extract it on your own, if you know how to do that from an odin .tar file.
AllGamer said:
you only need the modem, you don't need to flash an entire ROM.
there was a reference topic with a list of downloads for all different modems for the Note 3 in the General section of this Note 3 portion of the forum. http://forum.xda-developers.com/showthread.php?t=2475714
they are still uploading all the different models, you you might want to wait a bit, or you can extract it on your own, if you know how to do that from an odin .tar file.
Click to expand...
Click to collapse
Following the link you provided, it indicates the modem for model SM-N900W8 is "coming soon..." so it does not look like a modem is available for my model at this time. I tried looking for the Puerto Rico modem flash which you used but I do not see reference to it.
I was going to install the SM-N900W8 ROM for telus which would have the modem but as research indicates, if you install the wrong carrier ROM, you brick your device. I may have misinterpreted this but the last thing I wish to do is brick my device and have an expensive paper-weight in the end. Thanks again!
cellrama said:
I was going to install the SM-N900W8 ROM for telus which would have the modem but as research indicates, if you install the wrong carrier ROM, you brick your device. I may have misinterpreted this but the last thing I wish to do is brick my device and have an expensive paper-weight in the end. Thanks again!
Click to expand...
Click to collapse
the Puerto Rico ROM is safe to flash
actually anything that is for the SM-N900W8 are safe to flash
AllGamer said:
the Puerto Rico ROM is safe to flash
actually anything that is for the SM-N900W8 are safe to flash
Click to expand...
Click to collapse
So I just got my phone unlocked with cellunlocker.net code, threw in a bell SIM and rebooted etc, it worked and was pretty quick but nothing too incredible. Was getting top download speeds of about 750kb/s (or 6mbps) whereas on wind I'd get about half that tops in my current location. My question here is, the phone said 3g....to me that seems way too fast for 3g but not nearly right for lte and I also couldn't see lte as an option for the bands. I assume that's cuz I still had the wind modem on the phone? Even when I went into the *#2263# screen to enable lte it still didn't work....
Any ideas? Should I flash the Puerto Rico Rom? Does it still work on wind bit just also let you use the lte radios when the correct SIM is in?
cellrama said:
Unlocked the device through cellunlocker.net for 32.99 USD
Click to expand...
Click to collapse
asaqwert said:
So I just got my phone unlocked with cellunlocker.net code ...
Click to expand...
Click to collapse
How long did it take to get your unlock code with cellunlocker.net? Which device did you pick in the dropdown?
I got a quote for 14.99 but guessing you have to pay more for a secondary search later?
UPDATE:
Never mind just got the code and it worked Cost me 14.99.
Hi did you manage to enable the LTE bands on your phone. I am on the same boat, have a WIND note 3 and I would like to do the same.
Thank you
fidos said:
Hi did you manage to enable the LTE bands on your phone. I am on the same boat, have a WIND note 3 and I would like to do the same.
Thank you
Click to expand...
Click to collapse
I'm really new to this but hopefully this will clarify some info regarding WIND and please correct me should I be wrong. There are two things when working with a phone. Customization to the OS and proper data connection. If you wish to tweak your device, push it to the limits and customize your OS settings, you can root your device.
If you wish to just enable LTE so you can use it on an LTE capable network like Telus, Bell or Rogers in Canada, you must flash the proper modem file to enable LTE. As I understand, the Puerto Rico Modem Flash will allow you to enable LTE data on the WIND Mobile variant of the Note 3. You can get the Puerto Rico Modem Flash from Post #27 by AllGamer at the following link:
http://forum.xda-developers.com/showthread.php?t=2475714&page=3
I think this is safe but I'm waiting for clarification from AllGamer regarding what is meant by their statement "NOT for flashing!". Once confirmed, I'll update this post but if this works, I feel they should be thanked by clicking on the thank you button and a donation should be made for what you feel this information is worth and obviously, what you can afford. Without individuals like this, we would be at a stand still for modifications!
THANK YOU ALLGAMER FOR YOUR UNSELFISH DEMEANOR ON THE FORUM!
cellrama said:
I'm really new to this but hopefully this will clarify some info regarding WIND and please correct me should I be wrong. There are two things when working with a phone. Customization to the OS and proper data connection. If you wish to tweak your device, push it to the limits and customize your OS settings, you can root your device.
If you wish to just enable LTE so you can use it on an LTE capable network like Telus, Bell or Rogers in Canada, you must flash the proper modem file to enable LTE. As I understand, the Puerto Rico Modem Flash will allow you to enable LTE data on the WIND Mobile variant of the Note 3. You can get the Puerto Rico Modem Flash from Post #27 by AllGamer at the following link:
http://forum.xda-developers.com/showthread.php?t=2475714&page=3
I think this is safe but I'm waiting for clarification from AllGamer regarding what is meant by their statement "NOT for flashing!". Once confirmed, I'll update this post but if this works, I feel they should be thanked by clicking on the thank you button and a donation should be made for what you feel this information is worth and obviously, what you can afford. Without individuals like this, we would be at a stand still for modifications!
THANK YOU ALLGAMER FOR YOUR UNSELFISH DEMEANOR ON THE FORUM!
Click to expand...
Click to collapse
Thank you for your reply. I am not sure why everything sounds so complicated.
I was able to flash a small file to my S4 (rogers) to enable the WIND bands. The phone did not need to be rooted, ODIN worked like a charm and my S4 became pentaband
This ordeal with the note 3 is not as straight forward. I have been following all your post but I see that you have not received any straight forward answers to your questions. I am not an expert when it comes to rooting or flashing so I would love a simple way of doing this.
Thank you again, lets hope that we will find an easy way to do this

Sprint HTC 10 on T-Mobile?

Does the Sprint variant work with Ting GSM (essentially T-Mobile towers) if you SIM unlock it following the SIM unlock tutorials? Or would it require more than that? I looked on HTC's site and its shows the phone has all the same bands for the Sprint version and T-Mobile version. Does anyone have a Sprint version working with Ting or T-Mobile?
yadnom said:
Does the Sprint variant work with Ting GSM (essentially T-Mobile towers) if you SIM unlock it following the SIM unlock tutorials? Or would it require more than that? I looked on HTC's site and its shows the phone has all the same bands for the Sprint version and T-Mobile version. Does anyone have a Sprint version working with Ting or T-Mobile?
Click to expand...
Click to collapse
I believe it does if you change your cid and flash it to the unlocked firmware. There are threads everywhere on how to do this, make sure to check the un-carrier branded HTC 10 xda site.
yadnom said:
Does the Sprint variant work with Ting GSM (essentially T-Mobile towers) if you SIM unlock it following the SIM unlock tutorials? Or would it require more than that? I looked on HTC's site and its shows the phone has all the same bands for the Sprint version and T-Mobile version. Does anyone have a Sprint version working with Ting or T-Mobile?
Click to expand...
Click to collapse
I run a Sprint device on T-Mobile. Works perfect with the exception of WiFI Calling which I am currently trying to get working.
Simple way is to unlock SIM NV method, load custom recovery, load latest Viper ROM, on AROMA pick the proper base install MM or N and Choose T-Mobile for carrier and that's really it man. the LTE bands are already all there, reason why I say Viper after the unlock is because other people including me had trouble getting data to work on stock Sprint MM. Flashing Viper solved that beautifully.
jblparisi said:
I run a Sprint device on T-Mobile. Works perfect with the exception of WiFI Calling which I am currently trying to get working.
Simple way is to unlock SIM NV method, load custom recovery, load latest Viper ROM, on AROMA pick the proper base install MM or N and Choose T-Mobile for carrier and that's really it man. the LTE bands are already all there, reason why I say Viper after the unlock is because other people including me had trouble getting data to work on stock Sprint MM. Flashing Viper solved that beautifully.
Click to expand...
Click to collapse
Thanks!
yadnom said:
Thanks!
Click to expand...
Click to collapse
The only thing that sucks is you will be missing WiFi Calling which to me was a little annoying. I have tried everything, I went as far as S-OFF (kinda of a waste of $25) installed multiple firmwares (T-Mobile stock with Sprint radio, etc), different rom's, so far nothing, it seems tied to the actual us unlocked/t-mobile radio which as we know isn't compatible with the Sprint variant. On the plus everything else works including VoLTE.
jblparisi said:
The only thing that sucks is you will be missing WiFi Calling which to me was a little annoying. I have tried everything, I went as far as S-OFF (kinda of a waste of $25) installed multiple firmwares (T-Mobile stock with Sprint radio, etc), different rom's, so far nothing, it seems tied to the actual us unlocked/t-mobile radio which as we know isn't compatible with the Sprint variant. On the plus everything else works including VoLTE.
Click to expand...
Click to collapse
If you ever figured out Wi-Fi calling on the Sprint HTC 10 for T-Mobile, do you remember how and can you tell me?

Verizon & T-Mobile Question

I have a verizon S4 that I want to use on the t-mobile network and was thinking about rooting with the intent of installed a custom ROM. My question is can I install the t-mobile stock ROM on it? if not does anyone have a recommendation on what ROM would be good to install in it?
If the phone is locked to Verizon's network only, then you won't be able to use it on T-Mobile not matter how many ROMs you put on it.
Pwnycorn said:
If the phone is locked to Verizon's network only, then you won't be able to use it on T-Mobile not matter how many ROMs you put on it.
Click to expand...
Click to collapse
It is not locked, I am able to use a T-Mobile SIM card successfully, it just has all of the branding and I keep getting an "non verizon sim card installed" message. I can make calls and access the internet just fine. It shows connected to 4G LTE
Can't a stock T-Mobile ROM onto a verizon s4.

Strange Network Issues With Unlocked SM-G935P (Sprint) on MetroPCS

Hey guys, I could use a little help here. I've done some firmware flashing on phones years ago, so I'm not a total noob, just haven't needed to in a long time.
Anyway, I recently picked up an unlocked Sprint S7 edge (was a really good deal) and I'm trying to use it with Metro now. The issue is this. If I set the network to GSM mode, I can make phone calls just fine, but data is totally not functioning. If I switch it to LTE/CDMA mode, the data works beautifully, but I can't make or receive any phone calls. It just instantly hangs up if I try to dial out or goes to voicemail if someone calls me.
I've activated the IMEI with my carrier and verified that the phone is indeed unlocked. I'm guessing this is just some annoying Sprint bug put in there to make the phone not work right on other providers. Any ideas what needs to be done? Do I need to run a third-party ROM, flash a different modem to it? Something else?
I really appreciate any tips here.
What firmware is the phone running?
lvpre said:
What firmware is the phone running?
Click to expand...
Click to collapse
Hi Ivpre,
Thanks for responding. The phone is running Software version G935PVPU6BRD2, baseband version G935PVPU6BRD2, it's HW revision 7.0 and Android 7.0. Kernel version is 3.18.31-12623509.
I've tried using a few SM-G935U ROMs but they all have failed so far and left the phone in a boot loop. Only by reflashing a Sprint ROM am I able to successfully flash it.
I assume I'm just not selecting or finding a ROM that the same or newer version, as I've read about the downgrade issues with the bootloader. Any idea how to match one? I'd be fine with pretty much any ATT/T-Mobile/Metro ROM since that should fix my issue for the time being. A factory unlocked ROM would be nice though.
I have a T-Mobile Sim (same network Metro uses) in my unlocked Sprint S7 Edge. Network mode is set to Automatic and everything works fine.
Did you Add the APN for T-Mobile? I had to add the T-Mobile APN https://support.t-mobile.com/docs/DOC-28006
And the ALSO add a second APN named internet, with no other values changed. The 2nd one is the one selected, not sure why, but it works that way.
I would like to flash a T-Mobile Rom or the U Rom but they are on Baseband 4, which will not work since our phones are now on Baseband 6(5th number from the right in the firmware version.)
Did you try changing the APN settings?
gullzway said:
I have a T-Mobile Sim (same network Metro uses) in my unlocked Sprint S7 Edge. Network mode is set to Automatic and everything works fine.
Did you Add the APN for T-Mobile? I had to add the T-Mobile APN https://support.t-mobile.com/docs/DOC-28006
And the ALSO add a second APN named internet, with no other values changed. The 2nd one is the one selected, not sure why, but it works that way.
I would like to flash a T-Mobile Rom or the U Rom but they are on Baseband 4, which will not work since our phones are now on Baseband 6(5th number from the right in the firmware version.)
Click to expand...
Click to collapse
So you are using the Sprint firmware on T-Mobile? Everything works well? I'm thinking of jumping to cricket this summer, but one phone is stuck on b5 (the other is still rocking 4), so I was a little worried. So basically you just put in the SIM card and added the APN's?
lvpre said:
So you are using the Sprint firmware on T-Mobile? Everything works well? I'm thinking of jumping to cricket this summer, but one phone is stuck on b5 (the other is still rocking 4), so I was a little worried. So basically you just put in the SIM card and added the APN's?
Click to expand...
Click to collapse
Yes it was working fine with a T-Mobile Sim card and edited APN's. It is now back on Sprint because T-Mobile coverage is poor/non existent inside my work. I will be porting one of my SERO lines to T-Mobile but keeping one with Sprint. T-Mobile only uses Band 2 and 4 where I live, If you live somewhere that has band 12, it may not be unlocked in the Sprint Firmware.

Categories

Resources