Does the Sprint variant work with Ting GSM (essentially T-Mobile towers) if you SIM unlock it following the SIM unlock tutorials? Or would it require more than that? I looked on HTC's site and its shows the phone has all the same bands for the Sprint version and T-Mobile version. Does anyone have a Sprint version working with Ting or T-Mobile?
yadnom said:
Does the Sprint variant work with Ting GSM (essentially T-Mobile towers) if you SIM unlock it following the SIM unlock tutorials? Or would it require more than that? I looked on HTC's site and its shows the phone has all the same bands for the Sprint version and T-Mobile version. Does anyone have a Sprint version working with Ting or T-Mobile?
Click to expand...
Click to collapse
I believe it does if you change your cid and flash it to the unlocked firmware. There are threads everywhere on how to do this, make sure to check the un-carrier branded HTC 10 xda site.
yadnom said:
Does the Sprint variant work with Ting GSM (essentially T-Mobile towers) if you SIM unlock it following the SIM unlock tutorials? Or would it require more than that? I looked on HTC's site and its shows the phone has all the same bands for the Sprint version and T-Mobile version. Does anyone have a Sprint version working with Ting or T-Mobile?
Click to expand...
Click to collapse
I run a Sprint device on T-Mobile. Works perfect with the exception of WiFI Calling which I am currently trying to get working.
Simple way is to unlock SIM NV method, load custom recovery, load latest Viper ROM, on AROMA pick the proper base install MM or N and Choose T-Mobile for carrier and that's really it man. the LTE bands are already all there, reason why I say Viper after the unlock is because other people including me had trouble getting data to work on stock Sprint MM. Flashing Viper solved that beautifully.
jblparisi said:
I run a Sprint device on T-Mobile. Works perfect with the exception of WiFI Calling which I am currently trying to get working.
Simple way is to unlock SIM NV method, load custom recovery, load latest Viper ROM, on AROMA pick the proper base install MM or N and Choose T-Mobile for carrier and that's really it man. the LTE bands are already all there, reason why I say Viper after the unlock is because other people including me had trouble getting data to work on stock Sprint MM. Flashing Viper solved that beautifully.
Click to expand...
Click to collapse
Thanks!
yadnom said:
Thanks!
Click to expand...
Click to collapse
The only thing that sucks is you will be missing WiFi Calling which to me was a little annoying. I have tried everything, I went as far as S-OFF (kinda of a waste of $25) installed multiple firmwares (T-Mobile stock with Sprint radio, etc), different rom's, so far nothing, it seems tied to the actual us unlocked/t-mobile radio which as we know isn't compatible with the Sprint variant. On the plus everything else works including VoLTE.
jblparisi said:
The only thing that sucks is you will be missing WiFi Calling which to me was a little annoying. I have tried everything, I went as far as S-OFF (kinda of a waste of $25) installed multiple firmwares (T-Mobile stock with Sprint radio, etc), different rom's, so far nothing, it seems tied to the actual us unlocked/t-mobile radio which as we know isn't compatible with the Sprint variant. On the plus everything else works including VoLTE.
Click to expand...
Click to collapse
If you ever figured out Wi-Fi calling on the Sprint HTC 10 for T-Mobile, do you remember how and can you tell me?
Related
So after being with AT&T since 1998 I'm am going to give T-Mobile a try. Unlimited everything for $70 with no throttling. Excellent T-Mobile coverage in my area as well as LTE. My S4 is already rooted, custom ROM installed, and sim unlocked. However I can't get the dialer codes to work to enable AWS &HSPA. *#7284# or *#0808#. I have downloaded and installed the required Phoneutil.apk and no go. Anyone have any suggestions. here is the link on how to enable the T-Mobile bands, but it's not working for me. http://galaxys4root.com/galaxy-s4-t...aws-bands-on-att-galaxy-s4-sgh-i337sgh-i337m/
budco2000 said:
So after being with AT&T since 1998 I'm am going to give T-Mobile a try. Unlimited everything for $70 with no throttling. Excellent T-Mobile coverage in my area as well as LTE. My S4 is already rooted, custom ROM installed, and sim unlocked. However I can't get the dialer codes to work to enable AWS &HSPA. *#7284# or *#0808#. I have downloaded and installed the required Phoneutil.apk and no go. Anyone have any suggestions. here is the link on how to enable the T-Mobile bands, but it's not working for me. http://galaxys4root.com/galaxy-s4-t...aws-bands-on-att-galaxy-s4-sgh-i337sgh-i337m/[/QUOTE
You have to be on a stock touchwiz rom to get the dialer codes to work.They wont work on a custom rom or aosp rom.
Click to expand...
Click to collapse
Before I rooted my verizon galaxy s5 I was able to use ATT sim cards but the phone would not get any service whatsoever with a tmobile sim or metro pcs sim. Everyone i spoke to at least was able to connect to the tmobile or metro pcs network, even if they were having data issues...but I was not even able to get a network signal. Finally, I rooted the phone and am using a tmobile rom thinking that may help. But no luck. For some reason my phone will not register itself on tmobile or metro pcs, Not even to just connecto to the network to make phone calls. I tried 2 different tomible roms and i think an att rom and no luck whatsoever. Anybody else experience this issue? Is there a root function or service menu that I need to access to enable the proper band? Is rooting the phone even going to change anything? Makes no sense how every other verizon s5 out there has no problem connecting to tmobile or metro but I have the only one. Ive scoured the forums and have yet to find any answer....thoughts? Oh, I also tried every APN settings combination imaginable. Even other carriers just because I was getting nowhere with the tmobile and metro APNs.
Quite a lot of your thread made absolutely no sense, so I'm not sure if this will help.
Look for a tar.md5 that contains the stock modem partition for the Verizon S5, and flash it through Odin.
Are you bootloader unlocked? I would just flash a generic klte rom, like Cyanogenmod, instead of flashing an ATT or T-Mobile rom.
camcorder123 said:
Quite a lot of your thread made absolutely no sense, so I'm not sure if this will help.
Look for a tar.md5 that contains the stock modem partition for the Verizon S5, and flash it through Odin.
Are you bootloader unlocked? I would just flash a generic klte rom, like Cyanogenmod, instead of flashing an ATT or T-Mobile rom.
Click to expand...
Click to collapse
According to a few people i spoke with the root for verizon s5 can only accept TW roms. And to clear up anything that doesnt make sense. my verizon s5 will not get any service with tmobile or metro. Works fine with att. So i decided to root. After rooting still no luck. However, before I rooted I was getting no bars at all. After rooting I was actually getting service bars but still would not get any actual service. I tried every APN setting I could find and still no luck. Thats all. I will try your advice as far as flashing the tar.md5 and let you know.
leronlb33 said:
According to a few people i spoke with the root for verizon s5 can only accept TW roms. And to clear up anything that doesnt make sense. my verizon s5 will not get any service with tmobile or metro. Works fine with att. So i decided to root. After rooting still no luck. However, before I rooted I was getting no bars at all. After rooting I was actually getting service bars but still would not get any actual service. I tried every APN setting I could find and still no luck. Thats all. I will try your advice as far as flashing the tar.md5 and let you know.
Click to expand...
Click to collapse
There was a bootloader unlock exploit released - it allows any rom to be flashed. It's been in the top development posts for weeks. Go check that out, and you can flash cyanogenmod.
I actually am in a similiar situation except I am already on CM13 using a previously Verizon S5, I just started Tmobile service yesterday and in general I can make calls but data is rather inconsistent. Example right now when I make it call it falls down to 3g (Normal) but when I disconnect it tries to connect to H+ then 3G but all of them don't supply it data so it just swaps around 3G LTE and H+ and I have to airplane mode on/off to fix it. So this person may still have issues using CM13. I did already go over the APN information with people from TMobile and from post around the web. Does anyone think that flashing the Tmobile s5 modem stuff will fix this?
you just need to get the correct APN settings
buschris said:
you just need to get the correct APN settings
Click to expand...
Click to collapse
I've tried the correct son settings. It didn't work. I used the settings found online for T-Mobile. I called T-Mobile. Non of the settings worked. I flashed back the the stock rom. No joy. flashed a verizon s5 rom again. No joy. I am starting to think that this is the only verizon s5 that won't allow t to register on T-Mobile's network.
Hi all.
I have a G930P just unlocked (USB/hardware method via GSMZambia). Currently has older OTA-restricted ROM to allow the unlock.
I'd like to update to the newest G930U firmware to get rid of all the Sprint stuff.
We are Verizon (USA) customers, and will uset he phone on the VZW network. I have already confirmed this works after the unlock (using the SIM from my own VZW S7).
Question is:
Which G930U firmware do I use? on the download pages they are specified for Sprint, Veriozn, AT&T etc.
Do I use the G930U for VZW because that will be the carrier? What is teh difference between these, I assume it is the splash screen and which radios are set as the default?
Thanks
Wanted to follow up on this.
After some careful comparison I realized that ALL the "u" firmware files listed - for each of the different carriers - are in fact all the same file. Which make sense b/c it's intended for a phone that starts off life w/ possibility to go to any network.
So after putting the "u" firmware on my formerly Sprint phone, it works flawlessly on Verizon. As far as I can tell all the relative radio bands are working equally well as my other G930V (native Verizon) phone.
Hopefully this will be helpful to somebody else in the future....
who did you get lte and voice to work. for some reason i can only get one or the other to work. not both
DHG4DRAGON8 said:
who did you get lte and voice to work. for some reason i can only get one or the other to work. not both
Click to expand...
Click to collapse
I didn't do anything special at all.
I literally installed the reference ROM, and it worked. It has since auto-updated itself several times, and works flawlessly.
It's my wife's phone, I have a G930V w/ Verizon firmware etc (never done anything special w/ it) and the function the same. Just a few skin differences where Verizon has added extra stuff to mine AFAIK.
I have a Verizon HTC 10, which I have converted to US Unlocked and run LeeDroid, which mostly works, but it requires me to dial *#*#4636#*#* to select radio after every reboot.
I plan to stay on LeeDroid ROM, so don't need or want to take OTAs. I just want everything to work, including Samsung gear for my watch, advanced calling (HD calling mainly), visual voice mail and Android pay might be nice.
Now that Verizon firmware for nougat is available and I could convert back, dues it make sense? Is there any advantage to running US Unlocked or Verizon version? LeeDroid ROM provides everything for Verizon to fully work (or will very soon), so is it just fine to install the latest Verizon firmware and radios onto the US Unlocked version?
If you're just gonna use the phone on VZW, common wisdom states you should stick with VZW software, especially if/when Nougat is now available.
JustinChase said:
I have a Verizon HTC 10, which I have converted to US Unlocked and run LeeDroid, which mostly works, but it requires me to dial *#*#4636#*#* to select radio after every reboot.
Click to expand...
Click to collapse
That's not required...LeeDroid has always run perfectly well on Verizon firmware and not needed any dialed codes like that.
JustinChase said:
I plan to stay on LeeDroid ROM, so don't need or want to take OTAs. I just want everything to work, including Samsung gear for my watch, advanced calling (HD calling mainly), visual voice mail and Android pay might be nice.
Click to expand...
Click to collapse
The latest version of LeeDroid has Advanced Calling working for most Verizon users. For some reason, it's not working on mine, but there are reports of it working perfectly for a handful of other folks.
JustinChase said:
Now that Verizon firmware for nougat is available and I could convert back, dues it make sense? Is there any advantage to running US Unlocked or Verizon version? LeeDroid ROM provides everything for Verizon to fully work (or will very soon), so is it just fine to install the latest Verizon firmware and radios onto the US Unlocked version?
Click to expand...
Click to collapse
It's been discussed on here before (can't remember which thread, sorry) that it's always better to use Verizon firmware + radio when on the Verizon network. It's tweaked to work the best with Verizon's towers and signal.
It might be overkill, but since you are coming from US Unlocked firmware, I'd recommend using the full Verizon RUU and starting from scratch. That way, when you flash LeeDroid, you don't have any funky remnants of the old setup.
Tarima said:
If you're just gonna use the phone on VZW, common wisdom states you should stick with VZW software, especially if/when Nougat is now available.
Click to expand...
Click to collapse
Yeah, but it wouldn't be 'sticking with' VZW software, it would be re-converting back to VZW software, which isn't so cut and dried.
Posted from my phone, forgive any spelling errors.
btonetbone said:
That's not required...LeeDroid has always run perfectly well on Verizon firmware and not needed any dialed codes like that.
The latest version of LeeDroid has Advanced Calling working for most Verizon users. For some reason, it's not working on mine, but there are reports of it working perfectly for a handful of other folks.
It's been discussed on here before (can't remember which thread, sorry) that it's always better to use Verizon firmware + radio when on the Verizon network. It's tweaked to work the best with Verizon's towers and signal.
It might be overkill, but since you are coming from US Unlocked firmware, I'd recommend using the full Verizon RUU and starting from scratch. That way, when you flash LeeDroid, you don't have any funky remnants of the old setup.
Click to expand...
Click to collapse
Actually, no, it doesn't work perfectly well on Verizon if your using nougat firmware, the codes are required.
However, it does seem it is all working great now that we have VZW firmware for nougat, so I will probably convert back now.
I just wanted to see if there was any other reason to stay on US Unlocked, but it seems there isn't.
Off to find the no wipe firmware now.
Thanks for all the feedback.
Posted from my phone, forgive any spelling errors.
Hey guys, I could use a little help here. I've done some firmware flashing on phones years ago, so I'm not a total noob, just haven't needed to in a long time.
Anyway, I recently picked up an unlocked Sprint S7 edge (was a really good deal) and I'm trying to use it with Metro now. The issue is this. If I set the network to GSM mode, I can make phone calls just fine, but data is totally not functioning. If I switch it to LTE/CDMA mode, the data works beautifully, but I can't make or receive any phone calls. It just instantly hangs up if I try to dial out or goes to voicemail if someone calls me.
I've activated the IMEI with my carrier and verified that the phone is indeed unlocked. I'm guessing this is just some annoying Sprint bug put in there to make the phone not work right on other providers. Any ideas what needs to be done? Do I need to run a third-party ROM, flash a different modem to it? Something else?
I really appreciate any tips here.
What firmware is the phone running?
lvpre said:
What firmware is the phone running?
Click to expand...
Click to collapse
Hi Ivpre,
Thanks for responding. The phone is running Software version G935PVPU6BRD2, baseband version G935PVPU6BRD2, it's HW revision 7.0 and Android 7.0. Kernel version is 3.18.31-12623509.
I've tried using a few SM-G935U ROMs but they all have failed so far and left the phone in a boot loop. Only by reflashing a Sprint ROM am I able to successfully flash it.
I assume I'm just not selecting or finding a ROM that the same or newer version, as I've read about the downgrade issues with the bootloader. Any idea how to match one? I'd be fine with pretty much any ATT/T-Mobile/Metro ROM since that should fix my issue for the time being. A factory unlocked ROM would be nice though.
I have a T-Mobile Sim (same network Metro uses) in my unlocked Sprint S7 Edge. Network mode is set to Automatic and everything works fine.
Did you Add the APN for T-Mobile? I had to add the T-Mobile APN https://support.t-mobile.com/docs/DOC-28006
And the ALSO add a second APN named internet, with no other values changed. The 2nd one is the one selected, not sure why, but it works that way.
I would like to flash a T-Mobile Rom or the U Rom but they are on Baseband 4, which will not work since our phones are now on Baseband 6(5th number from the right in the firmware version.)
Did you try changing the APN settings?
gullzway said:
I have a T-Mobile Sim (same network Metro uses) in my unlocked Sprint S7 Edge. Network mode is set to Automatic and everything works fine.
Did you Add the APN for T-Mobile? I had to add the T-Mobile APN https://support.t-mobile.com/docs/DOC-28006
And the ALSO add a second APN named internet, with no other values changed. The 2nd one is the one selected, not sure why, but it works that way.
I would like to flash a T-Mobile Rom or the U Rom but they are on Baseband 4, which will not work since our phones are now on Baseband 6(5th number from the right in the firmware version.)
Click to expand...
Click to collapse
So you are using the Sprint firmware on T-Mobile? Everything works well? I'm thinking of jumping to cricket this summer, but one phone is stuck on b5 (the other is still rocking 4), so I was a little worried. So basically you just put in the SIM card and added the APN's?
lvpre said:
So you are using the Sprint firmware on T-Mobile? Everything works well? I'm thinking of jumping to cricket this summer, but one phone is stuck on b5 (the other is still rocking 4), so I was a little worried. So basically you just put in the SIM card and added the APN's?
Click to expand...
Click to collapse
Yes it was working fine with a T-Mobile Sim card and edited APN's. It is now back on Sprint because T-Mobile coverage is poor/non existent inside my work. I will be porting one of my SERO lines to T-Mobile but keeping one with Sprint. T-Mobile only uses Band 2 and 4 where I live, If you live somewhere that has band 12, it may not be unlocked in the Sprint Firmware.