Related
Hi Guys,
I am not sure if I am posting in the right place, but I could use some assistance on the Team EOS nightlies. They won't let me post in the DEV section yet, becuase I am mostly reader, not a poster. Anyway....
I've been running the EOS roms for a while, but I can't seem to run any nightly past 74. 74 runs great, when I tried to update to 75 (rom/gapps/wipe cache) it won't get past the "DUAL CORE" logo. I thought I bricked my xoom, but I am able to boot to recovery, reflash 74 (gapps/wipe) and it boot with no issue. I did a full wipe, and tried again with 76 but no joy (77 wasn't out at the time). I thought it was a problem with n75 and n76. I flashed back to n14 and it works fine, and I can upgrade back to n74. Tonight I tried to update again to n77, but still no dice. I let it sit for 15 minutes at the "Dual Core" logo, and all I noticed is that is got warm, but still no boot.
Any thoughts? All advise is welcome!
BTW, this is for a Stingray 4g xoom
And while I have your attention, I love the work you guys do, and this community, it really makes Android something special!
Weird. Try going into fastboot and do a full wipe of userdata, cache, and system. Then install. If need be, do a backup. This will totally wipe your device.
Wipe cache, wipe dalvik, flash ROM, flash GAPPS, fix permissions. Do it in that order and you should be fine.
Also make sure your using the latest GAPPS. It should be dated 2012-03-17.
Good Luck.
Still not working right, very frustrated, but I have new information
dellenrules said:
Wipe cache, wipe dalvik, flash ROM, flash GAPPS, fix permissions. Do it in that order and you should be fine.
Also make sure your using the latest GAPPS. It should be dated 2012-03-17.
Good Luck.
Click to expand...
Click to collapse
bigrushdog said:
Weird. Try going into fastboot and do a full wipe of userdata, cache, and system. Then install. If need be, do a backup. This will totally wipe your device.
Click to expand...
Click to collapse
Thanks to both of you. I did try this. What I have discovered so far is that some of the flashing fun I have been doing with my may have caused so minor issues with my external SD Card. I backed up the internal to it, and pulled it. I went through the process of nuking the xoom entirely. I.E. Wiped Cache, dalvik, full wipe, factory reset, reset permission, and deleted everything off the internal SD (wasn't in this order, but it all got done) I was able to flash N77, without GAPPS fine. It seemed to run faster with nothing else installed. Rebooted a few times, no problem. I was stoked. I flashed gapps, 03-17 version (the latest). factory reset again so that it was fresh and wiped the cache (just in case). It booted again no problems, ran me through initial config, and then began downloading my apps back. It seemed to run much faster than it ever did before.
Then I rebooted it, without doing any titanium backup restores, just fresh tablet, N77 with my 90 or so apps freshly installed from the market, and it froze again at the "Dual Core" boot screen. I waited hoping for some delayed joy, but none came.
So I went back through the process once again, factory reset, N77 install, wipe cache, install GAPPs. Booted.....initial config, auto downloaded 90 apps from market, reboot......dead.
So then I just flashed N74 again, wiped cache, install GAPPS, initial config, app download.....reboot.......works fine.
<general frustration directed at tablet, not anyone here/>
What gives???? I can't tell what the difference in internal apps in the ROM are that could be conflicting with the ones installed from the market.
Why the hell is N74 working and N77 not, when the apps in both ROMs look the same?
Why does N77 work great when the apps aren't restored?????
Why don't I make a million dollars?????
Why aren't I emperor of the universe???????????????
</general frustration directed at tablet, not anyone here>
Thanks much for all your help!
alright.... i have 2 suggestions these may not work and the second one is a pain in the butt to do but it got me out of a jam way back when i lost my softkeys no matter what i flashed
firstly.. in the sequence of your flashing throw in the 'format /system' see if that has any effect it is 'possible' the system is not being flashed correctly or it could be possible that it is getting corrupted and causing the bootloops (i always format system when full wiping)
second... and this is a pain.. but you can always try flashing back to STOCK... there could be other factors that aren't being flashed or fixed correctly causing ya problems... you can then go through the process and flash directly to the latest build... as i noted earlier this fixed a problem that nothing else could for me and has helped others but really this is a last last resort as it takes alot of time and screwing around
lastly... i have no idea sorry these are all i can input.. if possible can always try and use logcat while booting to see what is causing the crash if im not mistaken and upload a log and one of the devs may be able to have a look at it...
I Would stop dinking around with n77 and go to n90 I had the same issues around those nightly numbers, so I went all the way back to stock... (honeycomb) didn't fix it but I redid the whole install on a higher number and it seems to work itself out..... long story short try another maybe the 1.0 stable by them.
fkntwizted said:
I Would stop dinking around with n77 and go to n90 I had the same issues around those nightly numbers, so I went all the way back to stock... (honeycomb) didn't fix it but I redid the whole install on a higher number and it seems to work itself out..... long story short try another maybe the 1.0 stable by them.
Click to expand...
Click to collapse
He has the STINGRAY not the WINGRAY Xoom.
N77 is the latest for the 4G version. The version he has.
Read the OP
EOS Nightlies hate my xoom, my Xoom wanted CM9 I guess
joshndroid said:
alright.... i have 2 suggestions these may not work and the second one is a pain in the butt to do but it got me out of a jam way back when i lost my softkeys no matter what i flashed
firstly.. in the sequence of your flashing throw in the 'format /system' see if that has any effect it is 'possible' the system is not being flashed correctly or it could be possible that it is getting corrupted and causing the bootloops (i always format system when full wiping)
second... and this is a pain.. but you can always try flashing back to STOCK... there could be other factors that aren't being flashed or fixed correctly causing ya problems... you can then go through the process and flash directly to the latest build... as i noted earlier this fixed a problem that nothing else could for me and has helped others but really this is a last last resort as it takes alot of time and screwing around
lastly... i have no idea sorry these are all i can input.. if possible can always try and use logcat while booting to see what is causing the crash if im not mistaken and upload a log and one of the devs may be able to have a look at it...
Click to expand...
Click to collapse
Thanks much for this. I had already attempted the formatting of everything except the SD card before.....but for sh*ts and giggles I tried it one more time. unfortunately that didn't work.
Using the second option, of reverting stock, I went through sleeplessnija's tutorial on reverting. It really didn't seem that bad, taking me longer to setup my work machine than it did to send the fastboot commands. I was able to get it to boot stock (of course I didn't re-lock it) just fine, and it was quick....so it seems like my hardware is fine.
I used fastboot to put the replacement tiamat recovery, and formatted everything in the mounts menu again. I also mounted my SD card as USB storage and used the full format for it under windows. Then i copied N77 and GAPPS back to it, and re-installed them. It got to the second boot logo (first was the shaking team eos, the second is the square thing with rounded corners that moves). It hung for about 10 minutes, and I shut it off. annoyed.
So I went back into recovery, mounted my SD for USB access from my desktop, and copied the unofficial (which I think is now official) CM9 distro from Team Rogue (Steady's Rom I believe?). I formatted everything, and wiped everything (except the SD) again, and installed CM9 and gapps. Booted fine. Configured account, downloaded 90 apps, rebooted, no problems. Played with it for a while, rebooted....no problems.
I like that my xoom is back up and running......however it seemed that Steadies rom is just a little less fully featured than Team EOS. THAT IS NOT A KNOCK AGAINST TEAM ROGUE OR CM9.....my Xoom is working again (so far) thanks to him (them), and I run CM9 on my AT&T GSII. I just really like Team EOS on my Xoom, and have been with them since the beginning. I would love to know why my xoom suddenly hates the latest nightlies (everything since 74).
Edit: I forgot to ask, Joshndroid.....you mentioned running logcat to see what going on. If it can't boot past the dual core logo or the second boot logo from Team EOS....how do I get the logs? I am not familiar with android's logging.....even though I am a flash-a-holic. I am just thinking that if this is happening to me, maybe I can help out the devs (and myself, and maybe someone else) with the log output.
Edit 2: And Josh.....I forgot to tell you .....good call on the revert to stock answer. I didn't think about that before and thought I was screwed!
Thanks!!
Suddenly, my 6800 start to be very slow, so i have restarted the tablet, and since then it never boots, tried to do factory reset from recovery but it reboots while wiping data, wiping cache alone works but has no effect , the tablet still stuck on Galaxy Tab 7.7 sign.
i have re-flashed the firmware many times with no luck, is it possible to have bad sectors that prevent booting? how i could check if any exists?
is there any wiping Firmware?
Thanks
hdnebat said:
Suddenly, my 6800 start to be very slow, so i have restarted the tablet, and since then it never boots, tried to do factory reset from recovery but it reboots while wiping data, wiping cache alone works but has no effect , the tablet still stuck on Galaxy Tab 7.7 sign.
i have re-flashed the firmware many times with no luck, is it possible to have bad sectors that prevent booting? how i could check if any exists?
is there any wiping Firmware?
Thanks
Click to expand...
Click to collapse
Although this is not the right section to post , as this should be posted in "General".
But as this just happened to me few days ago, the only straight way to overcome this is to leave the tab till the battery drains completely.
This is probably happening due to corrupted data with your internal memory .
e2fsck is what you want to run while In an ADB shell to your device. I have had corrupted storage twice and running the command on the various partitions fixed it for me both times. I don't remember the partitions off head, but it's easily found in the forums here.. Hope this helps..
Sent from another iPhone4s..
Moved To General
The development section is not for questions, please post in the correct section in the future
http://forum.xda-developers.com/showpost.php?p=25487137&postcount=22
Sent from my GT-P6810 using XDA
Option to above (maybe) is to flash stock and then reset on completion, wipe in STOCK recovery, then do what you want -- works for me and I have very similar issues...
So ive had my n7 for a while and had over 10 different roms that i went through before landing on cookies and cream for 4.1.2 and cyanogenmod for 4.2.1
Well heres the problem. i was getting pissed off at all of the bugs and random reboots and incompatabilities so i fully wiped the device, minus bootloader, and flashed stock 4.1.2, it booted great
heres where it went wrong... i tried flashing cyanogenmod 10 via twrp, letting it use its stock kernel and even trying a different cm compatible kernel after booting failed.
when that didnt work i went back to stock, downloaded cookies and cream, wiped the rom, cache and dalvik cache. still bootloops
so i was like F**k it, and installed stock 4.2.1, booted fine.
tried again with the 2 latest cyanogenmod nightlies, which i know worked fine from before
still just bootloops with no idea how to fix it.
just to be clear, stock works, custom WILL NOT
bump guys, im kinda up **** creek without a paddle, emphasis on the kinda part
I have a similar problem(http://forum.xda-developers.com/showthread.php?t=2073977). Pretty much the only way I can get a ROM to stick is if I wipe /data as well. Not sure what's causing this, but I'm working on it. I think it could have something to do with the way that android stores some of it's /system data in /data at times
What's worked for me to flash a ROM other than stock, is to wipe the entire thing, and then use adb sideload to load the ROM.
Hey bro, i saw your thread before, by data, do you mean internal storage or just the system rom itself, because i wiped everything but the bootloader and started from scratch
I'm just talking about /data. An hour ago I noticed that as long as I use the Factory Reset option in TWRP, it will wipe it, and not touch the stuff on the sdcard(it could be just me though, my Nexus seems to be kinda weird). Then I wipe system, and flash whatever I need to.
Alright, one problem though, doing a factory reset deletes everything on the sdcard then when i try to use fastboot to flash cyanogenmod in a zip format it says stuff like android-product-info.txt is missing and whatnot, what do you do?
edit, dont read the part about wiping storage, i had a idiot moment there, ill give it a shot
hey everyone, currently running N dev4. but ever since i got the phone, even when i had stock marshmallow, it shut downs randomlly every now and then, i never saw it happen but i just see my phone turned off after picking it up. the phone runs great and i kept it in very good shape, it doesnt have a scratch..anyone else?
The first thing I would try is a factory reset or a full wipe of the device by formatting system, cache, dalvik then reflashing the partition images/rom and see if the problem persists. If it does, you may want to return for warranty
Hey all,
First post here on XDA and I'm hoping someone with more experience than me will be able to give me a hand! Until last week or so, I was running an up-to-date version of Lollipop (5.1.1), when my tablet started randomly freezing up on me, requiring "soft resets" to get it going again, or simply shutting off on me. Thinking it was software related, I tried wiping the cache with no success, so ended up doing a full factory reset. The issues *seemed* to clear up for a day or so, but came back, and so figuring it was Lollipop related, I wiped out the OS and installed CM12.1 (which was my first experience working with ADB and fastboot, and first time installing a non-stock ROM) with a TWRP recovery. A few days later, the freezing and shutting down issues began popping up again, with the shutdowns *usually* happening during sleep, but the freezing happening at anytime from initial "Google" logo to boot animation, to the middle of running an app. I had made a backup on TWRP when I got CM12.1 configured the way I wanted it, so I performed a soft reset when it froze on me, and booted into the bootloader. The tab kept freezing in the TWRP window before I could select a restore, so out of desperation I tried just doing a factory reset from within TWRP. Long story short, something must have happened during that reset, because it kept hanging on the boot screen. I thought I may have unknowingly messed something up, so I tried downloading and flashing a stock KitKat (4.4) ROM from Google's site, but kept encountering bootloader errors during the flashing and ended up only being able to boot to the bootloader screen (apparently got a faulty 4.3 bootloader in that ROM, which gave me a headache until I was able to get straightened out). I have been able to get a stock bootloader (4.23) up and running now, along with a stock recovery (going with Lollipop now, so stock for LMY47V) going, but that's it. I've tried flashing the stock lollipop image via shell script (I'm running a Fedora 23 machine), via individual commands, and via "fastboot update -w factory_image.zip" without success. ADB sideload still works via recovery, but I wasn't able to sideload the OTA packages for 5.1 either. The common errors that pop up seem to indicate an error (corruption? fragmentation?) on the cache partition, but I'm not a dev when it comes to Android, so I'm at a loss here... I keep getting "E: failed to mount /cache (Invalid argument)", and other errors associated with accessing/opening files further down the /cache tree. Would this error be more likely to be a hardware issue, or would it be a software/firmware issue? I've had similar errors before with USB drives, when they would start to bad and partitions begin failing, but have always been able to rebuild them and get my data back. If something like this is happening on my N7 and the cache partition has indeed become somehow corrupted and failed (but not physically....), is it possible at all to rebuild partitions on Android in a similar manner? I've scoured the web, but haven't been able to find anything that can help me out with something like that, so I figured my best bet before condemning the N7 to the junk drawer was to see if any of the pros around here had any words of wisdom that *might* get me back up and running. Thoughts and advice much appreciated!!
Thanks!
(Oh, I apologize for the lengthy post, but I wanted to be sure to provide enough background info..... Sorry for the lengthy read!!)
Honestly that sounds more like a hardware problem than a software problem.
During the early stages of booting, everything that happens is extremely deterministic - meaning that it should be completely repeatable in terms of the order & timing in which activities occur.
So, for it to behave erratically during early boot suggests that it is not software, but marginal hardware. If hardware is barely meeting logic levels or timing requirements, a small amount of random noise (which is always present) can cause a fault to occur at any time - and that sounds approximately like what you are observing.
Further, you replaced your ROM entirely and the problem persists - again suggesting that the problem is hardware, not software.
The most cost effective way of dealing with repair of a $200 tablet is - unfortunately - disposing of it and buying a replacement.
Sorry.
Thanks for the reply!! Shoot, that's what I was leaning towards too. What is the life expectancy of these tablets? I mean, I got 3 good years of use out of it, so I'm not going to complain, but it seems like they should have lasted longer... Would it be worthwhile to maybe grab a cracked screen N7 off eBay for parts and try to get my tab working with those parts maybe? I'm hoping the rumors are true about Google coming out with a new tab this fall, but I'd love to get mine working before then lol...