Database Users

[Q] Screwed up a rom install - new installs don't detect sim/battery stats - fatal?

Hi everyone
Not sure how, at which point and why, but I've screwed up installing new rom, and now while I can install whatever I want, latest CWM 5.5.04 installed, new roms while do start just fine, don't detect sim, battery shows at 0% full stop, etc...
It started with me wanting to update to latest Elite Rom 9.7 based on MIUI by Terramino. Tried 2 versions, multiple re-downloads, every time it would try to install from zip and just returned the install aborted, bad zip message.
At this point phone is wiped to factory reset, dalvik cache wiped, cache wiped, /system mounted and formatted, so ok, need something else...
Downloaded MIUI 2.1.20 (2.6.35 kernel like the one before reset), and that's when I noticed the problem, thought maybe didn't wipe something correctly, so again factory reset, wipe cache, format /system, retry - same issue, after that it's always the same result whether I use CM7, MIUI or whatever.
Following few threads loaded the 5.5.04 CWM in the end, and to my surprise to add to the problem - now when I mount SD card from within CWM to system - it shows with a cd icon in the system and is now read-only, so can't even add anything to it seemingly.
Booting to pink screen still gives debugging access to internal SD card of the phone via usb.
Any ideas from knowledgeable users as to how to fix this problem? Help greatly appreciated!

That elite rom is only for .32 kernel
you flashed it over official gb that's the prob
Sent from my U8800 using XDA Premium App

Thanks, figured that this was the case, just not sure why after trying to load back newer roms meant for .35 it's still messing it up.
Will do full reload of a kernel and get a proper rom to follow suit, hopefully it resolves the issue.

[Q] Team EOS Help needed with latest nightlies

Hi Guys,
I am not sure if I am posting in the right place, but I could use some assistance on the Team EOS nightlies. They won't let me post in the DEV section yet, becuase I am mostly reader, not a poster. Anyway....
I've been running the EOS roms for a while, but I can't seem to run any nightly past 74. 74 runs great, when I tried to update to 75 (rom/gapps/wipe cache) it won't get past the "DUAL CORE" logo. I thought I bricked my xoom, but I am able to boot to recovery, reflash 74 (gapps/wipe) and it boot with no issue. I did a full wipe, and tried again with 76 but no joy (77 wasn't out at the time). I thought it was a problem with n75 and n76. I flashed back to n14 and it works fine, and I can upgrade back to n74. Tonight I tried to update again to n77, but still no dice. I let it sit for 15 minutes at the "Dual Core" logo, and all I noticed is that is got warm, but still no boot.
Any thoughts? All advise is welcome!
BTW, this is for a Stingray 4g xoom
And while I have your attention, I love the work you guys do, and this community, it really makes Android something special!

Weird. Try going into fastboot and do a full wipe of userdata, cache, and system. Then install. If need be, do a backup. This will totally wipe your device.

Wipe cache, wipe dalvik, flash ROM, flash GAPPS, fix permissions. Do it in that order and you should be fine.
Also make sure your using the latest GAPPS. It should be dated 2012-03-17.
Good Luck.

Still not working right, very frustrated, but I have new information
dellenrules said:
Wipe cache, wipe dalvik, flash ROM, flash GAPPS, fix permissions. Do it in that order and you should be fine.
Also make sure your using the latest GAPPS. It should be dated 2012-03-17.
Good Luck.
Click to expand...
Click to collapse
bigrushdog said:
Weird. Try going into fastboot and do a full wipe of userdata, cache, and system. Then install. If need be, do a backup. This will totally wipe your device.
Click to expand...
Click to collapse
Thanks to both of you. I did try this. What I have discovered so far is that some of the flashing fun I have been doing with my may have caused so minor issues with my external SD Card. I backed up the internal to it, and pulled it. I went through the process of nuking the xoom entirely. I.E. Wiped Cache, dalvik, full wipe, factory reset, reset permission, and deleted everything off the internal SD (wasn't in this order, but it all got done) I was able to flash N77, without GAPPS fine. It seemed to run faster with nothing else installed. Rebooted a few times, no problem. I was stoked. I flashed gapps, 03-17 version (the latest). factory reset again so that it was fresh and wiped the cache (just in case). It booted again no problems, ran me through initial config, and then began downloading my apps back. It seemed to run much faster than it ever did before.
Then I rebooted it, without doing any titanium backup restores, just fresh tablet, N77 with my 90 or so apps freshly installed from the market, and it froze again at the "Dual Core" boot screen. I waited hoping for some delayed joy, but none came.
So I went back through the process once again, factory reset, N77 install, wipe cache, install GAPPs. Booted.....initial config, auto downloaded 90 apps from market, reboot......dead.
So then I just flashed N74 again, wiped cache, install GAPPS, initial config, app download.....reboot.......works fine.
<general frustration directed at tablet, not anyone here/>
What gives???? I can't tell what the difference in internal apps in the ROM are that could be conflicting with the ones installed from the market.
Why the hell is N74 working and N77 not, when the apps in both ROMs look the same?
Why does N77 work great when the apps aren't restored?????
Why don't I make a million dollars?????
Why aren't I emperor of the universe???????????????
</general frustration directed at tablet, not anyone here>
Thanks much for all your help!

alright.... i have 2 suggestions these may not work and the second one is a pain in the butt to do but it got me out of a jam way back when i lost my softkeys no matter what i flashed
firstly.. in the sequence of your flashing throw in the 'format /system' see if that has any effect it is 'possible' the system is not being flashed correctly or it could be possible that it is getting corrupted and causing the bootloops (i always format system when full wiping)
second... and this is a pain.. but you can always try flashing back to STOCK... there could be other factors that aren't being flashed or fixed correctly causing ya problems... you can then go through the process and flash directly to the latest build... as i noted earlier this fixed a problem that nothing else could for me and has helped others but really this is a last last resort as it takes alot of time and screwing around
lastly... i have no idea sorry these are all i can input.. if possible can always try and use logcat while booting to see what is causing the crash if im not mistaken and upload a log and one of the devs may be able to have a look at it...

I Would stop dinking around with n77 and go to n90 I had the same issues around those nightly numbers, so I went all the way back to stock... (honeycomb) didn't fix it but I redid the whole install on a higher number and it seems to work itself out..... long story short try another maybe the 1.0 stable by them.

fkntwizted said:
I Would stop dinking around with n77 and go to n90 I had the same issues around those nightly numbers, so I went all the way back to stock... (honeycomb) didn't fix it but I redid the whole install on a higher number and it seems to work itself out..... long story short try another maybe the 1.0 stable by them.
Click to expand...
Click to collapse
He has the STINGRAY not the WINGRAY Xoom.
N77 is the latest for the 4G version. The version he has.
Read the OP

EOS Nightlies hate my xoom, my Xoom wanted CM9 I guess
joshndroid said:
alright.... i have 2 suggestions these may not work and the second one is a pain in the butt to do but it got me out of a jam way back when i lost my softkeys no matter what i flashed
firstly.. in the sequence of your flashing throw in the 'format /system' see if that has any effect it is 'possible' the system is not being flashed correctly or it could be possible that it is getting corrupted and causing the bootloops (i always format system when full wiping)
second... and this is a pain.. but you can always try flashing back to STOCK... there could be other factors that aren't being flashed or fixed correctly causing ya problems... you can then go through the process and flash directly to the latest build... as i noted earlier this fixed a problem that nothing else could for me and has helped others but really this is a last last resort as it takes alot of time and screwing around
lastly... i have no idea sorry these are all i can input.. if possible can always try and use logcat while booting to see what is causing the crash if im not mistaken and upload a log and one of the devs may be able to have a look at it...
Click to expand...
Click to collapse
Thanks much for this. I had already attempted the formatting of everything except the SD card before.....but for sh*ts and giggles I tried it one more time. unfortunately that didn't work.
Using the second option, of reverting stock, I went through sleeplessnija's tutorial on reverting. It really didn't seem that bad, taking me longer to setup my work machine than it did to send the fastboot commands. I was able to get it to boot stock (of course I didn't re-lock it) just fine, and it was quick....so it seems like my hardware is fine.
I used fastboot to put the replacement tiamat recovery, and formatted everything in the mounts menu again. I also mounted my SD card as USB storage and used the full format for it under windows. Then i copied N77 and GAPPS back to it, and re-installed them. It got to the second boot logo (first was the shaking team eos, the second is the square thing with rounded corners that moves). It hung for about 10 minutes, and I shut it off. annoyed.
So I went back into recovery, mounted my SD for USB access from my desktop, and copied the unofficial (which I think is now official) CM9 distro from Team Rogue (Steady's Rom I believe?). I formatted everything, and wiped everything (except the SD) again, and installed CM9 and gapps. Booted fine. Configured account, downloaded 90 apps, rebooted, no problems. Played with it for a while, rebooted....no problems.
I like that my xoom is back up and running......however it seemed that Steadies rom is just a little less fully featured than Team EOS. THAT IS NOT A KNOCK AGAINST TEAM ROGUE OR CM9.....my Xoom is working again (so far) thanks to him (them), and I run CM9 on my AT&T GSII. I just really like Team EOS on my Xoom, and have been with them since the beginning. I would love to know why my xoom suddenly hates the latest nightlies (everything since 74).
Edit: I forgot to ask, Joshndroid.....you mentioned running logcat to see what going on. If it can't boot past the dual core logo or the second boot logo from Team EOS....how do I get the logs? I am not familiar with android's logging.....even though I am a flash-a-holic. I am just thinking that if this is happening to me, maybe I can help out the devs (and myself, and maybe someone else) with the log output.
Edit 2: And Josh.....I forgot to tell you .....good call on the revert to stock answer. I didn't think about that before and thought I was screwed!
Thanks!!

[Q] Nexus 10 boot stuck at google logo

Hi,
I have a nexus 10, rooted running latest nightly CM (19/12) and has been running fine without issues.
I turned it on this morning and its sat at the Google boot logo (and doesnt go any further).
I booted to recovery and did a reflash, wiped cache, wiped dalvic etc ... no joy.
tried a complete factory reset still no joy, is not booting past the google screen.
what next?
thanks
Dan.

DanielGwalter said:
Hi,
I have a nexus 10, rooted running latest nightly CM (19/12) and has been running fine without issues.
I turned it on this morning and its sat at the Google boot logo (and doesnt go any further).
I booted to recovery and did a reflash, wiped cache, wiped dalvic etc ... no joy.
tried a complete factory reset still no joy, is not booting past the google screen.
what next?
thanks
Dan.
Click to expand...
Click to collapse
Sounds like its something in the /system or /boot partitions, maybe. You might need to download the official, completely stock N10 firmware that the device came with and flash that to fix the problem. You can probably just google search for 'stock Nexus 10 firmware' and find a download link somewhere. Of course, if you have a backup file of before you flashed the CM nightly, then you could just restore that and it would work in much the same way don't panic, there is always a way

I got seemingly the same problem. Was copying a movie to the tablet and it crashed as usual. Probably ****ed up the file system or something. Now im traveling for the first time since I bought the tablet and it doesn't work. Grrrreat. :/
Edit: while I was sulking on the way to the airport (actually I wasnt sulking as I just got a new job 20 minutes ago yay) the tablet decided to boot up just fine when I wasnt watching.

[Q] Problems with Process System on PA 3.98

Hi!
I recently updated my ROM to the Paranoid Android 3.98, I did a full wipe, flashed the ROM, latest Gapps (with TWRP) and ever since the tablet has been become really laggy on opening apps or doing anything. I realised something was wrong straight after I booted it up by how long it was taking to connect to the WIFI etc.
Anyway, its hanging a lot on the unlock screen and sometimes I get a "Process System is not Responding" prompt. I've tried going back into recovery and clearing the caches/data again and its still hanging. Ive also tried using CWM recovery to wipe the tablet, flash the ROM/Gapps etc and its still really slow. Lastly, I just tried a factory reset from the settings menu and again, its still the same!
Any ideas on whats up with it and how to sort it out? I was thinking about unrooting it back to stock although I think the problem will still probably happen. I came from the PA 3.95 build and did a clean flash.
Cheers!
Chris

I think I have fixed it by following a post by Chasmodo on how to do a super-clean install.
1) I booted into recovery.
2) Did the three wipes (Data, Cache, Dalvik) several times over.
3) Went to Mount & Storage and formatted both system & cache*.
4) Flashed PA 3.98 & latest PA-Gapps.
5) Wiped both caches again and rebooted.
As soon as connecting WIFI, signing into Google I could tell it was running a lot faster again and now the lag on the unlock screen & opening apps seems to have stopped, also haven't had the "System Process isn't Responding since."
*Chasmodos version of the super-clean install didn't say to format the cache as well although I had tried just formatting the system and it didn't fix the issue. So I thought I'd try the same process with a cache format as well and now all issues seem to have been rectified.
Cheers
Chris

[Q] com.android.phone Crahes (VZW G2 - CM11 03/08 Snapshot)

Hi All,
I'm having an issue with my G2. I've been running the CM11 nightlies for a while now, they've been pretty decent.
I decided to flash the newest Snapshot today when I saw it pop up on my update list. As soon as I booted, I got the error "Unfortunately, the process com.android.phone has stopped".
This happened yesterday, so I booted into recovery, cleared cash, reinstalled the rom, cleared cache again, reinstalled gapps, cleared cache again, and it worked. Now I'm not getting so lucky. Anyone have any ideas on how to fix this? I'm really hoping this isn't going to be an issue with every CM nightly moving forward.
The best solution I could find seems to be specific to HTC phones, which involves reinstalling the boot.img. I don't think that applies to us, but if it does, how can I do that.
Thanks for your help.

EtherBoo said:
Hi All,
I'm having an issue with my G2. I've been running the CM11 nightlies for a while now, they've been pretty decent.
I decided to flash the newest Snapshot today when I saw it pop up on my update list. As soon as I booted, I got the error "Unfortunately, the process com.android.phone has stopped".
This happened yesterday, so I booted into recovery, cleared cash, reinstalled the rom, cleared cache again, reinstalled gapps, cleared cache again, and it worked. Now I'm not getting so lucky. Anyone have any ideas on how to fix this? I'm really hoping this isn't going to be an issue with every CM nightly moving forward.
The best solution I could find seems to be specific to HTC phones, which involves reinstalling the boot.img. I don't think that applies to us, but if it does, how can I do that.
Thanks for your help.
Click to expand...
Click to collapse
You've done a clean flash? Meaning you wiped Dalvik, Cache, System, Factory reset? I usually erase twice and then install CM and then GAPPS then restart the phone (Don't install custom kernel) some custom kernels are having trouble because looks like they updates some things in their kernels.

xxxrichievxxx said:
You've done a clean flash? Meaning you wiped Dalvik, Cache, System, Factory reset? I usually erase twice and then install CM and then GAPPS then restart the phone (Don't install custom kernel) some custom kernels are having trouble because looks like they updates some things in their kernels.
Click to expand...
Click to collapse
Thank you.
After some more digging, I had the idea to check the development thread of the CM ROM here. Apparently, a few other users have had the same issue.
It turns out, the newest version of CM needs to be cleanly installed, a dirty flash won't work. I just did a wipe and it's now downloading all my apps and reinstalling.
*sigh* such a pain, but whatever. Could be worse.

EtherBoo said:
Thank you.
After some more digging, I had the idea to check the development thread of the CM ROM here. Apparently, a few other users have had the same issue.
It turns out, the newest version of CM needs to be cleanly installed, a dirty flash won't work. I just did a wipe and it's now downloading all my apps and reinstalling.
*sigh* such a pain, but whatever. Could be worse.
Click to expand...
Click to collapse
Yeah it can be such a pain, I flashed nightlies when they sounded like they fixed an important issue (it'd be every other day) and I flashed clean all the time. Now im just going to stick to CM11 M4 until the next milestone.

try changin network type to GLOBAL.