I tried to flash the Baltic ROM with odin 3.07. I didn't find a way to change CSC (so KIES can recognize it) and i tried to go back to 4.3 EUR. But:
Odin failed (Checking MD5 finished Sucessfully..... Leave CS..... FAIL!) and now when i open the phone there is the following message :Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. KIES 3 says the connected device is not supported. I tried flashing the stock rom with ODIN (even tried 3.09) again but it failed. what can i do to recover my phone?
Thanks for any answers
tetra82 said:
I tried to flash the Baltic ROM with odin 3.07. I didn't find a way to change CSC (so KIES can recognize it) and i tried to go back to 4.3 EUR. But:
Odin failed (Checking MD5 finished Sucessfully..... Leave CS..... FAIL!) and now when i open the phone there is the following message :Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. KIES 3 says the connected device is not supported. I tried flashing the stock rom with ODIN (even tried 3.09) again but it failed. what can i do to recover my phone?
Thanks for any answers
Click to expand...
Click to collapse
Force Download Mode and flash one Custom Recovery. I think the Note 3 reboot from Recovery and Rom work. Try this...
But the Baltic Rom is KitKat 4.4.2?
tetra82 said:
I tried to flash the Baltic ROM with odin 3.07. I didn't find a way to change CSC (so KIES can recognize it) and i tried to go back to 4.3 EUR. But:
Odin failed (Checking MD5 finished Sucessfully..... Leave CS..... FAIL!) and now when i open the phone there is the following message :Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. KIES 3 says the connected device is not supported. I tried flashing the stock rom with ODIN (even tried 3.09) again but it failed. what can i do to recover my phone?
Thanks for any answers
Click to expand...
Click to collapse
if you flashed kitkat you cant go back to 4.3
thx for the quick replies guys. Since there is no way to go back to 4.3 is there a way to change the CSC so KIES can recognize the device? already tried CSC Select and the dialer code but no luck
tetra82 said:
thx for the quick replies guys. Since there is no way to go back to 4.3 is there a way to change the CSC so KIES can recognize the device? already tried CSC Select and the dialer code but no luck
Click to expand...
Click to collapse
The better for me is a new CLEAN install. On Customer Recovery wipe data+cache+dalvik and format system on mount and storage.
Whit recovery on screen force Download Mode and reflash the Rom. When You enter Your language at first boot, Your CSC is installed well (if the Rom have it on multi-csc).
I flashed the Poland Rom whit XEO, after first reboot I had my TPH well, automatically. What is Your CSC?
ValenteL said:
The better for me is a new CLEAN install. On Customer Recovery wipe data+cache+dalvik and format system on mount and storage.
Whit recovery on screen force Download Mode and reflash the Rom. When You enter Your language at first boot, Your CSC is installed well (if the Rom have it on multi-csc).
I flashed the Poland Rom whit XEO, after first reboot I had my TPH well, automatically. What is Your CSC?
Click to expand...
Click to collapse
OK sorry for late reply but i had a problem with my connection. I tried a different rom this time (polish) and at the same time i did what you said (full wipe etc. Worked like a charm. Device is faster thn ever and kies recognizes it again. Thanks a lot to everyone
Hi,
I have an international Samsung Galaxy S4 I9500, that is bricked after an error wihle updating from 4.2 to 4.3
I tried to flash an official 4.3 rom from odin, but no result
my phone stops on boot on the Samsung galaxy S4 screen, i can't access recovery mode, i can access only download mode ,
product name: gt-i9500
current binary: samsung official
system status : custom
waranty bit: 0
that's what the phone is displaying in download mode
Help please
Thanks
mihawk213 said:
Hi,
I have an international Samsung Galaxy S4 I9500, that is bricked after an error wihle updating from 4.2 to 4.3
I tried to flash an official 4.3 rom from odin, but no result
my phone stops on boot on the Samsung galaxy S4 screen, i can't access recovery mode, i can access only download mode ,
product name: gt-i9500
current binary: samsung official
system status : custom
waranty bit: 0
that's what the phone is displaying in download mode
Help please
Thanks
Click to expand...
Click to collapse
that's just a soft brick...
If u have orignal bill and have not rooted the phone before,go to a Samsung care and have it fixed.
Dont mess with it anymore,u may trip Knox,resulting in warranty void
edit:wait,u have custom system status,download a 4.4.2 for ur region and flash it
anu.cool said:
that's just a soft brick...
If u have orignal bill and have not rooted the phone before,go to a Samsung care and have it fixed.
Dont mess with it anymore,u may trip Knox,resulting in warranty void
edit:wait,u have custom system status,download a 4.4.2 for ur region and flash it
Click to expand...
Click to collapse
i tried to flash stock I9500XXUEMJ8 4.3, and id didn't work, same result, no recovery mode, and phone blocked on the boot screen "samsung galaxy s4 gt i9500
i'm not sure this is the right firware, is there a way to find wich firmware to flash ?
thanks
mihawk213 said:
i tried to flash stock I9500XXUEMJ8 4.3, and id didn't work, same result, no recovery mode, and phone blocked on the boot screen "samsung galaxy s4 gt i9500
i'm not sure this is the right firware, is there a way to find wich firmware to flash ?
thanks
Click to expand...
Click to collapse
check on sammobile,they have info on every fw released
Sent from my GT-I9500
I tried to flash a 4.2.2 fw downloaded from sammobile, failed at system.img
now my smartphone didn't turn on, didn't enter download mode,
it get's only on when i plug it to the pc usb and displays ""firmware upgrade encountred an issue, please select recovery mode in Kies & Try again"
the phone is always recognized by odin, so i tried to flash the 4.3 with repartition with a pit file, but failed on system.img,
PLEASE HELP :crying:
mihawk213 said:
I tried to flash a 4.2.2 fw downloaded from sammobile, failed at system.img
now my smartphone didn't turn on, didn't enter download mode,
it get's only on when i plug it to the pc usb and displays ""firmware upgrade encountred an issue, please select recovery mode in Kies & Try again"
the phone is always recognized by odin, so i tried to flash the 4.3 with repartition with a pit file, but failed on system.img,
PLEASE HELP :crying:
Click to expand...
Click to collapse
What version of Odin are you using? Try 3.09
Paolonicus said:
What version of Odin are you using? Try 3.09
Click to expand...
Click to collapse
Tried with odin 3.07 and 3.09, same result, failed at system.img
mihawk213 said:
Tried with odin 3.07 and 3.09, same result, failed at system.img
Click to expand...
Click to collapse
1. Uninstall completely the Samsung drivers.
2. Download and install THIS ones.
3. Try with other USB port to flash the firmware 4.4.2 again.
4. Good luck :highfive:
Joku1981 said:
1. Uninstall completely the Samsung drivers.
2. Download and install this ones.
3. Try with other USB port to flash the firmware 4.4.2 again.
4. Good luck :highfive:
Click to expand...
Click to collapse
dosn't work (ps: there is only 4.3 for my region (Algeria))
also tried with these drivers on another computer, still doe'snt work, blocked on system.img
is that the end of my s4 ?
mihawk213 said:
dosn't work (ps: there is only 4.3 for my region (Algeria))
also tried with these drivers on another computer, still doe'snt work, blocked on system.img
is that the end of my s4 ?
Click to expand...
Click to collapse
Make an screenshot of the problem of ODIN
Francisco momorei
Joku1981 said:
Make an screenshot of the problem of ODIN
Click to expand...
Click to collapse
here is the odin screenshot :
and here is a screenshot of what my phone is displaying :
nb: the phone doesn't turn one when i press the power button, it displays this screen only when it's plugged to the pc via usb
1. Close Odin completely
2. Open Odin again
3. Untick Re-partition and tick Autoreboot
4. Dont use .PIT file
5. Flash again same firmware
6. We gona see how it works :fingers-crossed:
7. If appears some error more... paste it here
Joku1981 said:
1. Close Odin completely
2. Open Odin again
3. Untick Re-partition and tick Autoreboot
4. Dont use .PIT file
5. Flash again same firmware
6. We gona see how it works :fingers-crossed:
7. If appears some error more... paste it here
Click to expand...
Click to collapse
Done it, always the same error, fail at system.img
mihawk213 said:
Done it, always the same error, fail at system.img
Click to expand...
Click to collapse
Did u wipe all before?
* EDIT: If the stock recovery dont work, flash a custom one in Downloade Mode by Odin for ur device. Wipe all there and flash the firmware in the way i was telling ya
Joku1981 said:
Did u wipe all before?
* EDIT: If the stock recovery dont work, flash a custom one in Downloade Mode by Odin for ur device. Wipe all there and flash the firmware in the way i was telling ya
Click to expand...
Click to collapse
if you mean by wipe , wipe cache, data, the phone wasn't able to enter recovery mode, so i didn't wipe
if you mean a nand erase while flashing, also i didn't it
but, the i flashed it with a 4.2 after trying a 4.3, that how i wasn't able to access download mode
thanks
I flashed CWM recovery successfully, and surprise, the phone turns on when i press the power button, but 2nd surprise, it blocks on a bootloop, and i can't access recovery mode ???
after that i flashed the stock firmware, and 3rd surprise, it passed, but the phone still blocked at a bootloop, and i can't access recovery
this phone is gonna make me crazy
mihawk213 said:
I flashed CWM recovery successfully, and surprise, the phone turns on when i press the power button, but 2nd surprise, it blocks on a bootloop, and i can't access recovery mode ???
after that i flashed the stock firmware, and 3rd surprise, it passed, but the phone still blocked at a bootloop, and i can't access recovery
this phone is gonna make me crazy
Click to expand...
Click to collapse
I presume u can't get into recovery mode,right?
If u can enter download mode,use Odin again,flash 4.2.2 of another region,it may work...
Sent from my GT-I9500
anu.cool said:
I presume u can't get into recovery mode,right?
If u can enter download mode,use Odin again,flash 4.2.2 of another region,it may work...
Sent from my GT-I9500
Click to expand...
Click to collapse
just to be sure, the last firmware i'd flashed was a 4.3, may i flash a 4.2.2 of another region or a 4.3 of another region ?
mihawk213 said:
just to be sure, the last firmware i'd flashed was a 4.3, may i flash a 4.2.2 of another region or a 4.3 of another region ?
Click to expand...
Click to collapse
are u worried abt ur warranty?
coz if u flashed stock 4.3 then knox was installed too ..
and with knox tripped, u loose ur warranty ..
If u don't care abt that, wipe clean everything then flash any rom, it will do fine..
anu.cool said:
are u worried abt ur warranty?
coz if u flashed stock 4.3 then knox was installed too ..
and with knox tripped, u loose ur warranty ..
If u don't care abt that, wipe clean everything then flash any rom, it will do fine..
Click to expand...
Click to collapse
i don't care about warranty, i flashed cwm recovery so the warranty is lost
you said that i must wipe clean everything, how to ? i haven't access to recovery mode !
I am using note 3 i got it from hkk and i guess its rooted thats why i am not getting any update for 4.4 so can anyone help me with it
Model no SM-N9005
Android version 4.3
Baseband version N900TUVUBMI7
Build number JSS15J.N9005XXUBMJ3
SELinux status permissive
Wrong section of wrong forum. You need to be in the standard note 3 forum, not tmo (sm900t), and in the q&a/help section, not development.
Sent from my leanKernel 2.5 powered stock 4.4.2 SM-N900T
Thread moved
vaibhavj007 said:
I am using note 3 i got it from hkk and i guess its rooted thats why i am not getting any update for 4.4 so can anyone help me with it
Model no SM-N9005
Android version 4.3
Baseband version N900TUVUBMI7
Build number JSS15J.N9005XXUBMJ3
SELinux status permissive
Click to expand...
Click to collapse
why Baseband is N900T while PDA is N9005? What is your CSC and Model?
You can install this app and open menu --> 'Firmware Browser...' to obtain the latest firmware for your device.
I installed that app but nothing is happening my screen got freezed and lately its saying " Phone INFO isn't responsing do you want to close it
re: update
vaibhavj007 said:
I am using note 3 i got it from hkk and i guess its rooted thats why i am not getting any update for 4.4 so can anyone help me with it
Model no SM-N9005
Android version 4.3
Baseband version N900TUVUBMI7
Build number JSS15J.N9005XXUBMJ3
SELinux status permissive
Click to expand...
Click to collapse
You will not be able to get the ota or kies updates since your phone is rooted.
The best way to get the latest 4.4 Kitkat firmware is to go to SamMobile.com
and find the SM-N9005 official odin flash rom/firmware for your phone.
Good luck!
reallysorry but please can you tell me how to install it as i'm new in it and there are many issues in my current rom so please and if possible can you suggest me the rom i should install so that i can have all s-pen features
vndnguyen said:
why Baseband is N900T while PDA is N9005? What is your CSC and Model?
You can install this app and open menu --> 'Firmware Browser...' to obtain the latest firmware for your device.
Click to expand...
Click to collapse
CSC is N9005OXABMJ3
AP IS N9005XXUBMJ3
CP IS N900TUVUBMI7
vaibhavj007 said:
reallysorry but please can you tell me how to install it as i'm new in it and there are many issues in my current rom so please and if possible can you suggest me the rom i should install so that i can have all s-pen features
Click to expand...
Click to collapse
vaibhavj007 said:
CSC is N9005OXABMJ3
AP IS N9005XXUBMJ3
CP IS N900TUVUBMI7
Click to expand...
Click to collapse
No offense but this is the worst kind of people here...people who root their phones without reading every single important thread carefully, ending up messing their phone up and blaming it on their "new-ness", so we gotta spoonfeed them.
Regardless, go to Sammobile and download an N9005 stock ROM for your region. Then use Odin to flash it. Check using that app above to make sure you have an N9005 bootloader (first four characters are N9005) to make sure you have an N9005 or you'll end up with a brick. Or you could go to the flashable modems thread and flash an MJ3 N9005 modem in Odin.
vaibhavj007 said:
I installed that app but nothing is happening my screen got freezed and lately its saying " Phone INFO isn't responsing do you want to close it
Click to expand...
Click to collapse
You have to install SuperSU from the Play Store, and grant root permission for this app to work.
Otherwise it will wait for the permission accepting, once your phone has been rooted.
re: step by step guide
vaibhavj007 said:
reallysorry but please can you tell me how to install it as i'm new in it and there are many issues in my current rom so please and if possible can you suggest me the rom i should install so that i can have all s-pen features
Click to expand...
Click to collapse
Setting up Odin :
1. Make sure you have installed the Samsung usb drivers for windows.
2. Run Odin as administrator in windows.
Add the TAR/MD5 file in the PDA section/slot in odin.
4. Now that Odin is setup, put the phone in download mode and connect usb cable.
Power off the phone then press 'home+power+volume down' buttons at the same time.
Keep the buttons pressed till Download mode appears.
5. Now that Odin and the phone are setup, connect the usb cable from phone to computer.
Odin will detect the device and show something like [com:4l]
6. Click START in Odin.
7. The flash will take 5 minutes for a full flash on average
8. When the flashing is complete, DO NOT disconnect usb until Odin shows ' PASS '.
9. The phone will reboot. Unplug usb cable from phone and computer then go into
recovery mode and select "factory/data reset".
That's it. Happy flashing ..!!
The SM-9005 4.4.2 Kitkat firmware from sammobile comes with the Odin Windows utility.
Unzip the zip file from Sammobile into a new empty folder in your windows desktop and
you will see the TAR/MD5 firmware file and you will see Odin after unzip is completed.
You will need to create a free account on Sammobile to be able to download
the SM-N9005 Kitkat 4.4.2 official firmware zip file.
Just follow the step by step instructions above.
Good luck!
Misterjunky said:
Setting up Odin :
1. Make sure you have installed the Samsung usb drivers for windows.
2. Run Odin as administrator in windows.
Add the TAR/MD5 file in the PDA section/slot in odin.
4. Now that Odin is setup, put the phone in download mode and connect usb cable.
Power off the phone then press 'home+power+volume down' buttons at the same time.
Keep the buttons pressed till Download mode appears.
5. Now that Odin and the phone are setup, connect the usb cable from phone to computer.
Odin will detect the device and show something like [com:4l]
6. Click START in Odin.
7. The flash will take 5 minutes for a full flash on average
8. When the flashing is complete, DO NOT disconnect usb until Odin shows ' PASS '.
9. The phone will reboot. Unplug usb cable from phone and computer then go into
recovery mode and select "factory/data reset".
That's it. Happy flashing ..!!
The SM-9005 4.4.2 Kitkat firmware from sammobile comes with the Odin Windows utility.
Unzip the zip file from Sammobile into a new empty folder in your windows desktop and
you will see the TAR/MD5 firmware file and you will see Odin after unzip is completed.
You will need to create a free account on Sammobile to be able to download
the SM-N9005 Kitkat 4.4.2 official firmware zip file.
Just follow the step by step instructions above.
Good luck!
Click to expand...
Click to collapse
I made an accont on sammobile but i am not able to find the firmware for my phone as i dont know its region
vaibhavj007 said:
I made an accont on sammobile but i am not able to find the firmware for my phone as i dont know its region
Click to expand...
Click to collapse
Use my app Phone INFO and you will get all need info.
But at first you should install SuperSU if your phone has been rooted.
vndnguyen said:
Use my app Phone INFO and you will get all need info.
But at first you should install SuperSU if your phone has been rooted.
Click to expand...
Click to collapse
I did it says there is no SU binary installed and superSU cannot install it this is a problem if you just upgraded to android 4.3, you need to manually re-root-consult the relevant forums for your device
vaibhavj007 said:
I did it says there is no SU binary installed and superSU cannot install it this is a problem if you just upgraded to android 4.3, you need to manually re-root-consult the relevant forums for your device
Click to expand...
Click to collapse
Can you suggest me any ROM
re: regon - baseband
vaibhavj007 said:
I made an accont on sammobile but i am not able to find the firmware for my phone as i dont know its region
Click to expand...
Click to collapse
Go into the phone's settings then go to "About Device" and the region is the
BASEBAND so find the BASEBAND under settings "About Devce".
Good luck!
Misterjunky said:
Go into the phone's settings then go to "About Device" and the region is the
BASEBAND so find the BASEBAND under settings "About Devce".
Good luck!
Click to expand...
Click to collapse
i have checked it
Baseband version N900TUVUBMI7
Model no is SM-N9005
there is no rom which have such spec and i search a rom in tmobile usa with device N900T it have a similar baseband
Hi guys!
I come here in a kind of dispair... I was using this firmware "I9505VJUGNI2_I9505ZTOGNI2_ZTO" in my i9505, then
I flashed trough ODIN a firmware "I9505XXUGNH8_I9505OLBGNH2_MM1".
After the process the phone reseted and updated, but as soon as it initiates, I just get errror messasges... I can't go to the system itself. The messages are constante.
I know the second firmware needed a diferent kernel than the one installed before, but I didn't flash it.
Than I tried to flach back the first firmware, but after the sucessfull flash trough odin, I still get the same error messages over and over... and worst... the second firmware is from Singapure, then the system language is not understandeble.
So guys, Waht can I do?
Sant Mark said:
Hi guys!
I come here in a kind of dispair... I was using this firmware "I9505VJUGNI2_I9505ZTOGNI2_ZTO" in my i9505, then
I flashed trough ODIN a firmware "I9505XXUGNH8_I9505OLBGNH2_MM1".
After the process the phone reseted and updated, but as soon as it initiates, I just get errror messasges... I can't go to the system itself. The messages are constante.
I know the second firmware needed a diferent kernel than the one installed before, but I didn't flash it.
Than I tried to flach back the first firmware, but after the sucessfull flash trough odin, I still get the same error messages over and over... and worst... the second firmware is from Singapure, then the system language is not understandeble.
So guys, Waht can I do?
Click to expand...
Click to collapse
The best firmware for your device is the one with correct CSC. Follow this steps:
1. Install Kies 3 and conect your phone to the pc.
2. Take a look your CSC (pic attached)
3. Go to Sammobile.com and download the correct firmware (with correct CSC) for your device.
4. Flash this firmware through ODIN.
5. Enjoy :highfive:
Joku1981 said:
The best firmware for your device is the one with correct CSC. Follow this steps:
1. Install Kies 3 and conect your phone to the pc.
2. Take a look your CSC (pic attached)
3. Go to Sammobile.com and download the correct firmware (with correct CSC) for your device.
4. Flash this firmware through ODIN.
5. Enjoy :highfive:
Click to expand...
Click to collapse
Well, Thank you very much!
After some trys i could flash Phylz recovery, than wipe the system and install the Cyanogenmod firmware! Now everything works like a charm! But thanks for the help anyway! What you said will help me in the next time I flash other firmwares!
OTA and Kies show my software is up to date, which isn't true because the phone that was replaced had lollipop...thru an OTA.
Is there a way to force the lollipop update?
Download Samsmoblie
TheNamelessMan said:
OTA and Kies show my software is up to date, which isn't true because the phone that was replaced had lollipop...thru an OTA.
Is there a way to force the lollipop update?
Click to expand...
Click to collapse
Sam's mobile has all Samsung Firmware, Download it and get Odin and put in download mode flash the firmware
I would love to have my phone back to KK, i can't be arsed to downgrade , but believe me lolipop is the worst thing that happen to the note 4, (even the keyboard lag when you type texts) Im using a debloted rom and is still bad..
TheNamelessMan said:
OTA and Kies show my software is up to date, which isn't true because the phone that was replaced had lollipop...thru an OTA.
Is there a way to force the lollipop update?
Click to expand...
Click to collapse
Yeah you Can Download Manually Official Lollipop 5.0.1 For AT&T Baseband Version: N910AUCU1COC4
After Downloading Extract it, You Can get 4 Files ,
BL-N910A To Be Flashed in BL SLOT in Odin
AP-N910A To Be Flashed in AP SLOT in Odin
CP-N910A To Be Flashed in CP SLOT in Odin
CSC_ATT_N910A To Be Flashed in CSC SLOT
You Can Flash All Files at the Same Time by Loading in Odin...
Just Flash AP,Bootloader & CP files...No need for CSC to Flash...
Remeber To Backup Your Data Before Flashing..
[*]Go in Recovery MOD & Do Factory Reset
[*]GoTo Download Mode by First Powered Off Your Note 4 than by Pressing Power+Volume Down+Home Button All Together...
[*]Just Check Auto Reboot & F.Reset Time in Odin Leave All other as it's
Here is Odin v3.10.6
I hope It'll solve the issue...
TechLife said:
Yeah you Can Download Manually Official Lollipop 5.0.1 For AT&T Baseband Version: N910AUCU1COC4
After Downloading Extract it, You Can get 4 Files ,
BL-N910A To Be Flashed in BL SLOT in Odin
AP-N910A To Be Flashed in AP SLOT in Odin
CP-N910A To Be Flashed in CP SLOT in Odin
CSC_ATT_N910A To Be Flashed in CSC SLOT
You Can Flash All Files at the Same Time by Loading in Odin...
Just Flash AP,Bootloader & CP files...No need for CSC to Flash...
Remeber To Backup Your Data Before Flashing..
[*]Go in Recovery MOD & Do Factory Reset
[*]GoTo Download Mode by First Powered Off Your Note 4 than by Pressing Power+Volume Down+Home Button All Together...
[*]Just Check Auto Reboot & F.Reset Time in Odin Leave All other as it's
Here is Odin v3.10.6
I hope It'll solve the issue...
Click to expand...
Click to collapse
my baseband version is N910AUCU1BNK3. Different from the one you listed above.
TheNamelessMan said:
my baseband version is N910AUCU1BNK3. Different from the one you listed above.
Click to expand...
Click to collapse
Yes Because You are on Android Kitkat...Baseband Version Shows The Android version...So Cannot Flash Android's Same Base Band on Earlier Same base-band...
If You Do So than You'll be Again on Android Kitkat...
When You Update To Lollipop Your Baseband Will be Change To that N910AUCU1COC4....I Mentioned Base band Just because You can Know What's New...
There is No need To Worry just Flash With Odin & Follow The Steps Carefully You'll Get Lollipop..than in Lollipop Your Baseband will be N910AUCU1COC4....After That You'll Be able To Update Via OTA... Its Latest N910AUCU2COC5 update is Around 160MB You'll Get that in OTA..
First You've To Flash That I Told you in Above Post...
Check Attachement I captured From AT&T Site