Database Users

[Q] bricked note 3

Hey guys, so I have a note 3 n9005,which i had rooted previously. This morning, I tried to flash the new touchwiz kitkat firmware via Odin and failed. Now the phone wouldn't boot up, but I an able to make it into the download mode. I have tried flashing several firmwares but neither of them works, I also had cm11 installed, so odpnt know f the bootloader has been updated or not...
So of anybody could please help me with this, that would be greatly appreciated

i have excatly the same problem tried to update s9005 via odin hong kong version to german 4.4.2 and now wont boot, odin fails only 20 seconds in read so many threads would also like to see some solutions to op.

CaptaiinCaveman said:
Hey guys, so I have a note 3 n9005,which i had rooted previously. This morning, I tried to flash the new touchwiz kitkat firmware via Odin and failed. Now the phone wouldn't boot up, but I an able to make it into the download mode. I have tried flashing several firmwares but neither of them works, I also had cm11 installed, so odpnt know f the bootloader has been updated or not...
So of anybody could please help me with this, that would be greatly appreciated
Click to expand...
Click to collapse
You also need to add some of the stuff it is written in download mode and the log in Odin when in fails. If you went to 4.4.2 on N9005 you can not return to 4.3 (which you should have read by now, there are only 200 posts in 50 threads about it). What kind of N9005 was yours (16/32/64GB), what region/CSC?

xclub_101 said:
You also need to add some of the stuff it is written in download mode and the log in Odin when in fails. If you went to 4.4.2 on N9005 you can not return to 4.3 (which you should have read by now, there are only 200 posts in 50 threads about it). What kind of N9005 was yours (16/32/64GB), what region/CSC?
Click to expand...
Click to collapse
I flashed the DBT FW again with this pit file created by HSDPilot http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77.
It worked and lash was complete now however i am stuck in SAMSUNG logo after restart.
ANy help?

solution
newapostlenew said:
I flashed the DBT FW again with this pit file created by HSDPilot http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77.
It worked and lash was complete now however i am stuck in SAMSUNG logo after restart.
ANy help?
Click to expand...
Click to collapse
hi i followed your instructions afte having the same problem.
once it was flashed and at the samsung logo
i took battery out, replaced it and started phone in recovery mode. go to wipe factory reset
then reboot
mine worked and is ok .

CaptaiinCaveman said:
Hey guys, so I have a note 3 n9005,which i had rooted previously. This morning, I tried to flash the new touchwiz kitkat firmware via Odin and failed. Now the phone wouldn't boot up, but I an able to make it into the download mode. I have tried flashing several firmwares but neither of them works, I also had cm11 installed, so odpnt know f the bootloader has been updated or not...
So of anybody could please help me with this, that would be greatly appreciated
Click to expand...
Click to collapse
darkman13 said:
i have excatly the same problem tried to update s9005 via odin hong kong version to german 4.4.2 and now wont boot, odin fails only 20 seconds in read so many threads would also like to see some solutions to op.
Click to expand...
Click to collapse
Do either of you have a 16 GB version?

Hi All,
My problem :
I wanted to install the official kitkat rom but I made a big mystake : I took N900 files instead of N9005...
After that I successfully installed the right bootloader and CWM.
I installed some cuustom roms but the setupwizard crash at the last step
I tried to flash the complete official 4.4.2 rom but odin failed with message on the phone : "ODIN : invalid ext4 image"
Anybody has any idea to help me ?

hi guys i manage to fix it, well mine anyway worked by flashing the pit i found on xda and selecting repartion on odin 3.7 along with german 4.4.2 to my n9005 from Hong Kong, re booted and done a factory reset via volume button also wiped cache and re started and it came back alive on the selected german rom 4.4.2. hope it hels others. ps my note 3 was from hong kong n9005 32gb

xclub_101 said:
You also need to add some of the stuff it is written in download mode and the log in Odin when in fails. If you went to 4.4.2 on N9005 you can not return to 4.3 (which you should have read by now, there are only 200 posts in 50 threads about it). What kind of N9005 was yours (16/32/64GB), what region/CSC?
Click to expand...
Click to collapse
hey, i wasnt trying to downgrade, i was going from cm11 to official 4.4.2. i've got a 32gb model from france i believe (the box has french written all over it so do the manuals)

newapostlenew said:
I flashed the DBT FW again with this pit file created by HSDPilot http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77.
It worked and lash was complete now however i am stuck in SAMSUNG logo after restart.
ANy help?
Click to expand...
Click to collapse
dude, you are god thank you so much for that, working perfect now

xclub_101 said:
You also need to add some of the stuff it is written in download mode and the log in Odin when in fails. If you went to 4.4.2 on N9005 you can not return to 4.3 (which you should have read by now, there are only 200 posts in 50 threads about it). What kind of N9005 was yours (16/32/64GB), what region/CSC?
Click to expand...
Click to collapse
After installing DBT NB4 FW ( or with Polish NB3 FW) my LTE speeds become almost 0.
I tried multiple installs.
Any guidance?

Quick tip: Uninstall KIES.
Kies is like a big brother.
Use ODIN 1.85 and tick update phone bootloader. That's how I fixed mine. The other versions of Odin wouldn't let me update bootloader.
Of course, before you do this Flash/wipe data in recovery mode.
But uninstalling KIES solved my issue.
Sent from my SM-N9005 using Tapatalk

[Help] OMG! Did i Brick my new note 3!? :(

Hey guys. Ive had a note 3 before in the past and have used the Root DelaVega to root successfully. This was early in the year. I sold my old note 3 for an HTC One. Well today i traded my HTC One back for a note 3 as i missed the Note 3. As soon as i came home i attempted to use the Root DelaVega method to foot (just like i did before) and immediately it failed.
I have been stuck on a screen saying "firmware update encountered an issue - select recovery in Kies" so i tried Kies 3.2 however it says my device is not compatible. Come to find out after doing research (talking to the original owner i traded my HTC One for) the Note 3 i have is on the latest version of KitKat 4.4.2 that is not compatible with the Root DelaVega method or any root method - so i screwed that up. I can successfully boot in and out of download mode. Ive tried to flash N900XXUDNA6 4.4.2 in Odin several times, it begins then fails almost immediately and the bar on the phone itself (in download mode) begins then freezes shortly after beginning. Ive also tried to flash N900XXUDNC1 JellyBean thru odin and get the same results - almost immediately fail and the blue status bar on the phone freezes when it barley begins. What else can i do??? am i totally screwed? Ive been researching and trying to fix this for 6 straight hours now! My gf is about to kill me for being online so long Is there anything i can do at this point? Am i stuck.

Do you know what Region the phone was originally? I had a similar issue and I had to get the Hong Kong (in my case) version of a stock ROM and flash that to get things working again. Not all partitions are the same - you might need a PIT file to match your original region and then flash the ROM.
What info do you get in DL mode?

Journyman16 said:
Do you know what Region the phone was originally? I had a similar issue and I had to get the Hong Kong (in my case) version of a stock ROM and flash that to get things working again. Not all partitions are the same - you might need a PIT file to match your original region and then flash the ROM.
What info do you get in DL mode?
Click to expand...
Click to collapse
Yes the phone is for AT&T so it's US. When I go into DL mode Knox counter is still 0x0. Is there a certain firmware I need then to match with the AT&T model? Or a pit?

jthornton71707 said:
Yes the phone is for AT&T so it's US. When I go into DL mode Knox counter is still 0x0. Is there a certain firmware I need then to match with the AT&T model? Or a pit?
Click to expand...
Click to collapse
Go to Sammobile and see if you can find the version you had, sounds like an older JB if kingo app didn't trip Knox. Reflash that using ODIN.
I don't know if there was a problem with American bootloader, see if there's an AT&T Note 3 forum. Might find answers there...

jthornton71707 said:
Hey guys. Ive had a note 3 before in the past and have used the Root DelaVega to root successfully. This was early in the year. I sold my old note 3 for an HTC One. Well today i traded my HTC One back for a note 3 as i missed the Note 3. As soon as i came home i attempted to use the Root DelaVega method to foot (just like i did before) and immediately it failed.
I have been stuck on a screen saying "firmware update encountered an issue - select recovery in Kies" so i tried Kies 3.2 however it says my device is not compatible. Come to find out after doing research (talking to the original owner i traded my HTC One for) the Note 3 i have is on the latest version of KitKat 4.4.2 that is not compatible with the Root DelaVega method or any root method - so i screwed that up. I can successfully boot in and out of download mode. Ive tried to flash N900XXUDNA6 4.4.2 in Odin several times, it begins then fails almost immediately and the bar on the phone itself (in download mode) begins then freezes shortly after beginning. Ive also tried to flash N900XXUDNC1 JellyBean thru odin and get the same results - almost immediately fail and the blue status bar on the phone freezes when it barley begins. What else can i do??? am i totally screwed? Ive been researching and trying to fix this for 6 straight hours now! My gf is about to kill me for being online so long Is there anything i can do at this point? Am i stuck.
Click to expand...
Click to collapse
Hi mate,
if you are stuck, maybe you can try this.
http://forum.xda-developers.com/show....php?t=2701062
it's a way to unbrick your software.
and if the older owner of your N3 said it's on the latest firmware of kitkat.
maybe your problem is the firmware in the sammobile were before the firmware you have install on your device via OTA update.
Yours firmware came throw out via OTA update and with some reason you can't see any latest firmware USA N900A in sammobile.
try the method in the link and reply if you have been successful.
cumps

Ik Knox is 0×0,then u can try samsung service centre ?
Sent from my SM-N900 using XDA Premium 4 mobile app

Galaxy Note 3 SM N-9005 Malaysia - Lollipop update

Hi everyone,
This is my first post and I hope that I am in the right section.
As per info in the thread title, I have a Malaysian Samsung Galaxy Note 3 updated to the last available firmware 4.4.2
I am trying to flash Lollipop with Odin (i followed all the instructions in the guide, literally step by step).
I have tried with the italian Lollipop update branded Vodafone, but Odin always failed and the phone was soft bricked.
I have reinstalled the original malaysian firmware 4.4.2 that i had prior this attempt. phone booted ok and worked perfectly fine.
Then i downloaded the lollipop firmware from poland, this thime odin completed the process and gives me a pass. but the phone goes in boot loop (samsung logo at booting never goes away). I have tried to reboot in recovery mode and wipe the cache. but still boot loop.
Would anyone be so kind to explain what i am doing wrong and how i could install lollipop on my malaysian galaxy note 3?
Any help would be much appreciated.
Luc81

Wipe all before flash lollipop.

Joku1981 said:
Wipe all before flash lollipop.
Click to expand...
Click to collapse
Thanks,
actually I have just managed to flash it correctly about 1 hour ago. i didn't need to wipe my data. Now it works properly.
Thanks anyway for your help!

hows your experience ?
just let us know what was the mistek, so others wont have to ask the same question again ...hehehe
all the best!

note 3 lolipop(Malaysia) N9005
Guys good news because this morning when I was checking my software update ... Thru Ota is about 860mb and thru keis 3 is about 1.3gb. Took me couple hours to download and about 1hour ++ to install. Booting up took some time and luckily everything is working fine for the time being.
Anyone updated and how's the battery draining issue.

i try update my note3 using kies3, it confirmed lollipop 5.0 available to update, but unfortunately my note3 repeatedly crash during upgrade and window on kies top up said "PC cant recognized my phone". Maybe cause of my knox warranty void 0x1 (trip). i hack on local C:\Users\YOUR NAME\AppData\Local\Temp and get copy of *.zip files (N9005DXUGBOD1_N9005OLBGBOD1_HOME.zip). It was lollipop firmware version for malaysia. Upgrade it using Odin and succesfull installed.

Lolipop
I was having the same issue while updating thru keis. So I downloaded it thru OTA. Battery sucks after lolipop. If you are facing any issue just send me a mail

Soft Bricked Galaxy S4 LTE while downgrading

Hello,I had this rom installed(https://forum.xda-developers.com/galaxy-s4/i9505-develop/rom-super-wizcyan-29-nov-15-t3259562) and since I'm kind of noob I tried to downgrade to this one ( https://forum.xda-developers.com/showthread.php?t=2454205). I flashed it in TWRP recovery and when the phone finished and restarted i got into a bootloop( i think that's how it's called) - the samsung logo with the light from behind but that's it. I cannot open the TWRP recovery anymore,I cannot restore the stock firmware with KIES, I tried to restore 5.0.1 lollipop stock firmware through ODIN with and without PIT file and also 4.4.2 stock ( i did not find one for my country - Romania, I found one for Germany). Please help me with this issue..I will install any software and just leave it if it works..I just need my phone .. yep,desperate ..)
I'm sorry if I broken any rule by opening a new thread I'm just desperate to solve this issue..been working at it for almost 4 hours..
L.E. Odin says there is no partition when trying to flash the stock roms so i used this PIT file ( CSB_signed_Fusion3_EUR_0325_V2.pit)

Have you tried Smart Switch?

Pwnycorn said:
Have you tried Smart Switch?
Click to expand...
Click to collapse
I don't really know what that is or how should I do it )

Problem fixed. I flashed from a different pc a complete stock rom(bootloader,pit file,csc and all of the other stuff) and it worked perfectly.

Help - Stuck in Infinite Bootloop

Hi, I have an old N8010 16GB which was bought from John Lewis in the UK (an official retailer). The tablet has worked great, however recently it screwed up and got stuck in a bootloop.
So I decided to see if I can try to recover it and that's why I am here. I tried Odin and started putting what I thought is the correct firmware on it, however all the firmwares I try all PASS and seem to install correctly but the device still has a infinte bootloop (it crashes and reboots after the Samsung logo shows). I noticed the PIT file says -8G on one of the firmware files - I guess this means it is for the 8GB version which is clearly not going to work on my 16GB version?
Please can someone guide me on what firmware to download and what to try as I have been trying for 5 hours now and cannot find any way to get it out of this boot loop, I have no problems at all installing firmware as it passes every time with Odin. I am using Odin3 v3.10.7
I'm not sure but I think I need this firmware: N8010XXUCMG1

Killer_Klient said:
Hi, I have an old N8010 16GB which was bought from John Lewis in the UK (an official retailer). The tablet has worked great, however recently it screwed up and got stuck in a bootloop.
So I decided to see if I can try to recover it and that's why I am here. I tried Odin and started putting what I thought is the correct firmware on it, however all the firmwares I try all PASS and seem to install correctly but the device still has a infinte bootloop (it crashes and reboots after the Samsung logo shows). I noticed the PIT file says -8G on one of the firmware files - I guess this means it is for the 8GB version which is clearly not going to work on my 16GB version?
Please can someone guide me on what firmware to download and what to try as I have been trying for 5 hours now and cannot find any way to get it out of this boot loop, I have no problems at all installing firmware as it passes every time with Odin. I am using Odin3 v3.10.7
I'm not sure but I think I need this firmware: N8010XXUCMG1
Click to expand...
Click to collapse
Hey, I had the same problem recently and I fixed it using the stock firmware (can't post the link due to forum rules) and using a patched Odin 3.14.1 3B.
Hope it helps

Lets hope the OP has fixed the problem in the last 10 months .Unknown as he never came back .
Disguise link to post it or bit.ly

Flash this in odin https://forum.xda-developers.com/galaxy-note-10-1/orig-development/recovery-twrp-3-2-3-t3895276
Than flash Android 7.1 https://forum.xda-developers.com/galaxy-note-10-1/development/rom-slimroms-slim7-t4128693
Reboot
Done it is back in use