Hi guys,
I gave a separated lcd and a new digitizer to the local repair center.
Guy charged me 15 £ for applying LOCA on it.
I took fixed screen to home, connected lcd to phone and results as you can see on the pictures ARE BAD!!!
What has he done wrong?
Can this be fixed or should I ask for new LCD?
Related
I have just got my replacement digitizer in the mail 2day from Hong Kong and installed it just now, all is working perfectly as new again. I did a hard reset when the touch screen was first playing up, so I have lost all my themes, settings etc but luckily my office docs etc are still intact.
Anyhow, I made a video on how to replace the touch screen, its only quick as I did not go from the disasembly part, as there is already videos and tutorials on this, so I just documented on the actual digitizer replacement, which is actually basic 2-5mins work, but I thought a vid would be good for any noobs needing it in the future.
Once I edit it all up I will post the video here.
If anyone needs help on replacing the digitizer just ask. DON'T be tricked into buying the LCD + Digitizer if you only need the touch screen, as it is very easy to do without the lcd, though some ppl disagree.
Thanks for reading, thread will be updatd with Vid asap.
Hi X86
I have a crack on the upper plastic case, thats prob. why I have dirt showing on screen. In your opinion where is it located and can I clean it ?
It seems as if (if the crack is on the actual original housing, not just a add-on case) that dirt/dust has fallen down inbetween the digitizer and the LCD, so you can see it through the touchscreen right?
This is fairly simple to fix, you will either need to patch up the crack with silicone or something (best from the inside so it does'nt look messy) OR buy yourself a whole nw housing which cost about US15-$20.
Then just pull your elf/in apart and use cotton tips and wipes to thoroughly clean the LCD and insides.
If you need any help, just let me know via PM or here.
?Good Luck!
Thanks
That was my feeling, now I just need courage to take apart the casing (either repair or replace )
Thanks for bringing up this issue in the forum and extending your hand to others.
I appreciate it alot.
Hi x86
I have read the sticky for disassembling the elf. Can you tell me if it's necessary to unscrew anything and remove the rear speaker in order to remove the front panel ?
Edit: I think I found the answer in the next pics, the 4 screws attach to the front panel, right ?
Hi, i've just entered the world of winmo. i've recently wrecked my Elfin. But i can't seem to figured it out whether it's the LCD or the digitizer is broken...
1) my Elfin's screen turns to white with a few red and black stripes on the lower left corner, it doesn't react to any touch gesture.
2) i can still activesync the device and seems that my SD card is still working, i could copy out my PIMcontacts...thank goodness
3) the alarm still rings the next morning, i assume my device is still operating, of course now i've taken out the battery.
4) i've ask the phone shop for repair enquiries and they said that the replacement parts are not for retail selling in my country, Malaysia... so it needs to send back my Elfin to OEM and takes about 3 weeks time and cost around USD $ 130 bucks....
5) my friends told me it wasn't worth it, thus i was thinking of looking for help online and finally i found this thread...
6) can anyone offer few pieces of info? i thank you 1st.
bjonmy said:
Hi, i've just entered the world of winmo. i've recently wrecked my Elfin. But i can't seem to figured it out whether it's the LCD or the digitizer is broken...
1) my Elfin's screen turns to white with a few red and black stripes on the lower left corner, it doesn't react to any touch gesture.
2) i can still activesync the device and seems that my SD card is still working, i could copy out my PIMcontacts...thank goodness
3) the alarm still rings the next morning, i assume my device is still operating, of course now i've taken out the battery.
4) i've ask the phone shop for repair enquiries and they said that the replacement parts are not for retail selling in my country, Malaysia... so it needs to send back my Elfin to OEM and takes about 3 weeks time and cost around USD $ 130 bucks....
5) my friends told me it wasn't worth it, thus i was thinking of looking for help online and finally i found this thread...
6) can anyone offer few pieces of info? i thank you 1st.
Click to expand...
Click to collapse
That sounds like both a Digitizer and LCD issue.
Red and white strips is caused by the screen, while the phone not sensing your fingers is caused by digitizer.
But you still managed to use something like mymobiler to rescue your stuff right?
Yeah, you're in Malaysia right? In Singapore, to get this items, we have to get it off ebay or dealextreme.com.
But be careful with this, it void warrenty.
If you send it to HTC service centre, it may cost $160> Singapore dollars.
Cheers,
Jeremy
For a bit time ago i accidently broke my lcd display on my hd2, and because htc could not fix this cheap i decided to try myselvf.
first i ordered a lcd and a new digitizer and soldered them together and fixed everything just like in the video and the lcd started to work, but now my touch pad does'n work! I can't do anything
Then i took the screen out and ordered a new one from ebay which was assembled from the shop.
And same resault
what could be the problem? I have a danish hd2 and i have tried to update the firmware after i replaced the screen and digitizer and still no respond
what could be the problem?
hey, did u fix the digitizer yet. i had a similar problem. the volume buttons got stuck in and i decided to open it and fix it. right after closing it back the digitizer stopped functioning...............please let me know asap if u managed to fix urs and how u did it thanks
Same problem here
I've got the exact same problem. Replaced LCD and digitizer but it is still not working. Additionally the screen is a little yellowish. Anyone knows if this might be related and any idea who to possibly fix this?
Hi, I have exactly the same problems, even tried with 2 fresh new digitizers. Could it be that they are extremely sensitive on the inside? Or is it some glitch somewhere?
Extremely frustrating!
Sent from my HTC HD2 using XDA App
well mine is in the scrapped now. when my digitizer arrives and i sort things out i will get back to you
Hi, I bought HD2 with broken digitizer, so after it came to me I immediately buy new digitizer, didn't look for the cheapert but once again I resolve myself to never buy things for china digitizer doesn't work so I need to new one from USA, send it to my friend and he repair it within day, now everything work... and yes digitizer are very sensitive
Hey guys,
I have a problem. A week ago I dropped my hd2 and the screen was smashed. I took it to the service and they replaced the digitizer. Now, as it turned out the lcd displays badly and the say it has to also be replaced. I know that after the drop the lcd worked fine. Now it looks like this: http://img857.imageshack.us/i/imag0001u.jpg
My question is - is this broken lcd? it has to be removed? or can I do something with it? is it the fault and they've done something wrong?
Thanks for answers.
Wrong forum.
Btw if your screen was working fine before you sent it, then its simple as sending the phone back and asking them to replace the screen coz they've done a ****ty(pardon my french) job on that, mate. They either were careless when separating the digitizer from the screen or they've just replaced it with a different 1(not even tested probably).
Still their fault, sent it back, simples.
Hey guys,
I have a problem. A week ago I dropped my hd2 and the screen was smashed. I took it to the service and they replaced the digitizer. Now, as it turned out the lcd displays badly and the say it has to also be replaced. I know that after the drop the lcd worked fine. Now it looks like this: http://img857.imageshack.us/i/imag0001u.jpg
My question is - is this broken lcd? it has to be removed? or can I do something with it? is it the fault and they've done something wrong?
Thanks for answers.
Read this post by XDA member Facdemol, this post will help you answer your question.
emjakmaciej said:
Hey guys,
I have a problem. A week ago I dropped my hd2 and the screen was smashed. I took it to the service and they replaced the digitizer. Now, as it turned out the lcd displays badly and the say it has to also be replaced. I know that after the drop the lcd worked fine. Now it looks like this: http://img857.imageshack.us/i/imag0001u.jpg
My question is - is this broken lcd? it has to be removed? or can I do something with it? is it the fault and they've done something wrong?
Thanks for answers.
Click to expand...
Click to collapse
Unless they just haven't connected the LCD properly (very unlikely), there's definitely a problem with it... I'm afraid I think it'll have to be replaced.
in turkey if there is a digitizer problem they change the whole screen.
Under the TMOUS warranty they will replace your phone if an issue comes up like that because it's usually just an unlucky roll of the dice if your LCD does that.
because your problem seems to occur after a mechanical shock, i would suspect 2 scenarios.
1. You have a bad connection between the display flex connector and phone's motherboad. This can either be caused by motherboard display connector failure, some small pins on that connector got busted when the phone was either dropped or once the digitizer was changed. I give pretty small chances for this to have happened.
2. If you see a phone lcd stripped down of it's housing, you will notice that on the bottom part of it (or lateral one on some displays) you can see a flex cable coming from the display's glass-like surface to the back of it. It sits pretty tight around one edge of the screen. It connects the TFT matrix to the processing part (column&row controllers) on the back of the display (or on the flex cable/phone motherboard .. ). If a phone is hit from one side, the case and display housing can press hard on this flex cable and break it, or puncture it. In this case, some of the signals needed to drive some specific areas of the tft matrix aren't getting to the matrix itself so you see some lines on the screen (plus color rendering errors). Sometimes, improper manipulation of the screen when assembling back the phone can also cause the problem.
I give more chances to this scenario.
If number 1 could be fixed by a simple phone disassemble and connector checking, number 2 will indeed require a new display as there isn't any way to service that broken flex cable.
My previous posts about display problems tried to focus on "naturally occurring" problems, not ones induced by electric/mechanical shocks. So in this case, my above scenarios will be more suited as likely suspects for your problem.
So a few months back I'd had my digitizer replaced and recently I noticed that it was collecting dust so in a wrong move! I decided to disassemble and clean it!
I faced some difficulties disassembling the main board and I think I've damaged the LCD while doing that! after putting everything back together I noticed that the top half of the display shows distorted colors , I've attached some photos.
Now my question is that if you guys believe it is a damaged LCD or some other parts and If so is there any way to fix it without replacing the LCD?
thank you very much in advance
-Bahador
Next time don't do it by yourself. Anyway, I think you didn't assemble it properly, try to disassemble it again and assemble it properly. If still doesn't work go to your manufacturer.
thank you for your response, can you be more specific please? do you think it's the LCD's cable? cause I was no able to detach it in the first place
Bad news...
110% your lcd is damaged/faulty.
Replacing it is the only solution, but don't do it yourself, it seems like you just don't have the right skills for that!