I have a VERIZON G2 and had rooted and installed TWRP on it. I decided to install the OTA update but when I did, something went badly wrong.
Now whenever I try to power on the phone, there is script in the top-left-hand corner (on the LG logo screen; says something like "boot" with bunch of horizontal lines, not sure) then goes to a black screen w/ the backlight still on.
However, I can still get to the factory reset page by holding down the power and volume down button, but when I push the power button three times, the script in the corner appears then goes to the backlit black screen.
Did I brick my phone? HELP PLEASE!
Also, I cannot get to TWRP or anything besides the LG boot screen and the factory reset page
bump?
you can try the solution proposed in here
http://forum.xda-developers.com/showthread.php?t=2581013&page=2
Related
Hi guys,
My Mrs. Orange SanFran has all of a sudden decided it doesnt want it's screen touched anymore. All the hard buttons are working and can not see any other issues. Seems there are several people who have experienced it but it seems to resolved itselfon a restart but her's isn't, no matter how long I take the battery out or pressing the reset under the battery cover I can't use the screen making it useless.
Any ideas? I stuck a custom Rom of 2.2 on it when first got it but can't remeber which one, maybe modaco Kitchen R12 Rom.
Cheers
Reboot to recovery, Wipe both Dalvik and normal cache, and restart. If that doesn't help, do a factory reset / wipe data, and restart. If that doesn't help re-install the rom.
Thanks for the tip, but I tried to enter recovery by holding down volume key when powering up but a screen breifly loaded that had the small text "android" written upsidedown but then just goes on loop of the screen and the standard screen, can't do anything.
Holding up volume whilst powering on doesn;t do anything and because I can't use the touch screen I can't access any recovery apps through the phone OS.
It's weird cause I've used to recovery mode on phone boot before as first ROM didn't work, so I know the recovery module worked before, no idea why not now. :-s
Could be either bad flash/root or faulty hw. Google "de-bricking a ZTE Blade".
Thanks again. Came across a very thorough article on modaco but unfortunately the phone won't do anything than a normal startup when holding the up volume or up and menu, so can't try any of the suggestions.
The volume buttons do work though as moved the volume in the OS
Just to be sure: you did first press & hold the volume down button, and then press & hold the power button? You have to hold them both down until the recovery menu pops up. I can take even 10 seconds or more.
If everything fails, try TPT flash. It should solve if there is no hardware issue.
Stuck in a boot loop after attempting to restore my T-Mobile 801.
It boots up to the T-Mobile splash screen does its little ding a ling thing then 10 seconds later restarts the loop.
I used this http://forum.xda-developers.com/showthread.php?t=2432476
Any other ideas?
Looks like I got it, I did a factory reset on top of it and seems to be working again.
Can you tell me exactly what you did? I seem to be having a similar problem with the Verizon G2 and can't get anything working.
DeBuggz said:
Can you tell me exactly what you did? I seem to be having a similar problem with the Verizon G2 and can't get anything working.
Click to expand...
Click to collapse
After I ran the factory flashing tool, the phone would boot loop (I think most likely because the settings and profile from the last rom wasn't reset by the tool.)
So what I did was use the factory recovery option in the phone by doing the following.
1. Power down the phone (Hold power for 15 Seconds)
2. Press and Hold Vol Down and Power
3. Quickly after seeing the LG logo release the power (while holding Vol Down still) then pressing and holding the power again. You should get a white screen asking if you want to reset your phone press Power to Confirm twice.
A little android pops up and does some work then reboots your phone. The phone should boot after that.
So I don't know why this happened, I had rooted and installed TWRP and was happy, so I tried to install Malladus (1.2.9) and gapps and the 24a upgrade .zip, and now here I am.
I've tried most methods, and the LG Flash tool just says "failed PreviousLoad()" when I click the yellow arrow.
I f'd this phone up 12 hours after I got it.
If you see the LG boot logo than there is still a chance to fix the phone. Try to manually go back into recovery. Turn off the phone by long pressing power button. As soon as the screen is black, press power and volume down together, you only get a half second to do it. When LG logo appears release and press them together again until the factory reset screen comes up. Then press power 2 or 3 times and you should go back into your recovery. Once there you can try to reinstall rom, backup or side load a new rom. Hope this helps!
What is your phone model? Without that I cannot help you.
Same problem
Hi guys, like an idiot I was successfully able to install the debloat 4.4.2 on my vzw LG G2 but I tried to flash nandroid recovery back to my 4.2 and now I am stuck on boot loop and cannot get back into recovery. I tried to hard button by pressing both the bottom button and power, and press it again when the lg logo comes on and after pressing the power button a few times, it just goes into a black screen, so I cannot get back into recovery in this manner. Anyone know how I can get back into recovery without going through the full wipe back to factory?
Dear experts,
Phone model: Karbonn A9+
Rom: Custom Rom Hyperion Skyfall
When I hold the power button, the phone turns on and off, No problems with that.
However, when I press volume Up+Power, I get a green screen saying FASTBOOT at the top left corner and that’s it. Nothing happens from that point.
when I press volume Up+Power, I get a green screen and holding the buttons past that I get a red screen saying RECOVERY at the top left corner and that’s it. Nothing happens from that point.
However, when I press volume down+Power, I get a black screen saying ENTRY QPST DOWNLOAD at the top and that’s it. Nothing happens from that point.
I have to remove the battery to turn my phone off.
Moreover, I tried a factory reset erasing internal and external storage, after erasing when the phone is rebooted and gets stuck in the start-up screen. I removed the battery and powered on the mobile ,no problem at all the phone turns on but not resettted.
What I did?
Tried to install latest CWM through recovery, updated it but I pressed something instead of restart your device.
What should I do to make everything work again? I am a noob in Android, please be extra patient and illustrative
Many thanks in advance
same issue
Paalagan said:
Dear experts,
Phone model: Karbonn A9+
Rom: Custom Rom Hyperion Skyfall
When I hold the power button, the phone turns on and off, No problems with that.
However, when I press volume Up+Power, I get a green screen saying FASTBOOT at the top left corner and that’s it. Nothing happens from that point.
when I press volume Up+Power, I get a green screen and holding the buttons past that I get a red screen saying RECOVERY at the top left corner and that’s it. Nothing happens from that point.
However, when I press volume down+Power, I get a black screen saying ENTRY QPST DOWNLOAD at the top and that’s it. Nothing happens from that point.
I have to remove the battery to turn my phone off.
Moreover, I tried a factory reset erasing internal and external storage, after erasing when the phone is rebooted and gets stuck in the start-up screen. I removed the battery and powered on the mobile ,no problem at all the phone turns on but not resettted.
What I did?
Tried to install latest CWM through recovery, updated it but I pressed something instead of restart your device.
What should I do to make everything work again? I am a noob in Android, please be extra patient and illustrative
Many thanks in advance
Click to expand...
Click to collapse
I am facing the same issue...today i flashed "ClockWorkMod_Recovery_V6_-_Karbonn_A15.zip" . It was flashed successfully. But after that whenever I try to enter recovery mode using Power+ Volume up keys, it shows red screen... thats it....i do not see typical recovery screen menu. However the screen turns full white. Only option is to take out the battery and restart the phone.
PLEASE PLEASE PLEASE HELP
Please help me. I am in a sort of panic right now.
I have a ZTE Blade C2 v809, sold here in Portugal as Meo Smart A12. It was rooted and working fine. I was however getting some error 24's trying to install apps. I thought this might have had to do with using Titanium Backup to remove TouchPal (I did make a backup first), so I decided to restore TouchPal. There were however some errors in the restore and it was stuck there, so I decided to reboot the phone.
Chaos. Now it wont boot. If I press the button normally, the phone boots, I see the android logo, the screen goes black (Not shutdown black, a sort of light black background) and nothing happens. If I try to boot into Recovery mode by holding the power button and the volume down key, I just get the android logo stuck there, nothing happens. If I hold the power button and the volume up key, I get the picture of that laying down android with the message error.
Any more info I must provide please tell me, I am desperate for a solution, If I lose this phone I wont be able to get another one.
Okay I fixed it. Turns out the recovery menu DID work if I waited for a long time and tapped the screen. Used the update.zip available from the site, and it works like a charm
Yay, I bricked my phone, too.
I did something similar, changed recovery-from-boot.p name to recovery-from-boot.p-bak and install-recovery.sh to install-recovery.sh-bak
Now the phone doesn't boot properly, in fact it's stuck in a boot loop:
>starts
>shows white ZTE logo on screen
>restarts
Tried connecting the phone via USB cable and used fastboot devices & adb devices commands, no devices found.
Also tried pressing "power + vol down" and "power + vol up", nothing. I can't enter recovery mode or bootloader.
Apparently the remaining way to get in it's trough the SD slot, or maybe there's another way.
I kindly ask for help, couldn't be possible that I ruined this cell phone so fast.
Ideas, somebody?