I bought my Samsung Nexus S from a Koodo booth here in Canada two days ago and have been enjoying it quite a lot since. I've also been reading up on the wealth of information pertaining to rooting it and trying to sort out so many different factors. I notice I'll have to use the search feature to find one little triviality that comes along and the fix it.
Then I decided to just make my own thread where I'll post every step of the ways I find and how I figure out how to solve my issues involved with rooting my phone.
To start, I found out you can create a backup with NANdroid.
I couldn't find any information on where to download this elusive "NANdroid" and then heard from This thread that all I have to do is
kenvan19 said:
Now lets get started. First, how does one install mods on Android? Lets do a NANDroid backup to begin:
1) Turn your phone off.
2) While holding the Volume Up button press the power button until the screen turns on and you will see a black screen with an Android on it and a lot of numbers and words that will mean nothing to you. This is called the Bootloader. In both the bootloader and the recovery mod you will use the volume buttons to navigate between options and the power button to select one.
3) Navigate down to Recovery option and select it.
4) Navigate down to backup and restore
5) Navigate down to backup and select it and let it run.
Click to expand...
Click to collapse
This didn't seem to be the case when I followed these steps; coming first to the predicted screen,
(containing this information)
Code:
FASTBOOT MODE
HW VERSION - REV 16
BOOTLOADER VERSION - I9020XXKA3
BASEBAND VERSION - I9020UCKB2
CARRIER INFO - ATT (but im with Koodo?)
SERIAL NUMBER - Lots of digits.
LOCK STATE - LOCKED
Also giving me the option to select between
Reboot Bootloader
Reboot
Recovery
Power Off
When going into recovery mode I'm greeted with an animation of a box with an arrow coming out of it. This turns into a triangle with a exclamation in the middle of it.
From here I press power and volume up to come to a menu that is supposed to have a NANdroid option I've been told.
Instead; I get the options:
Reboot system now
Apply update from /sdcard
wipe data/factory reset
wipe cache partition
At this point I'm currently stumped, though I'll continue searching as I'd rather not be stuck without a backup before starting the rooting process.
UPDATE: Even though I'm weary of proceeding without backing up, I'm sure I'll be able to restore my phone back to factory somehow.
I spent the night downloading and installing the Android SDK, then started configuring my device for use on windows 7.
Currently I'm in the bootloader interface after installing my phone's device drivers while being in fastboot mode.
The drivers take a couple of minutes, but they install successfully!
On I go, I'll just point DOS to the directory I want it to. Now I'll run the program through dos. What's this?! AND ERROR!?
Psht, I WOULD be missing the "AdbWinApi.dll" Not a hard thing to fix. I'll just google for the file!
Oh! I don't even have to download the file, the directory has just changed!
That was an easy problem to solve with many solutions provided!
Time to try again!
Sweet, it works. WHOA! TEXT ON MY ANDROID WHAT ARE YOU DOING!
And I select Yes to come to a nice screen that says my phone is now unlocked!
Now I need to download an image file? Okay. I can do this.
Okay, flash recovery the flashboot. Looks like the image has updated since the thread's instructions. Hopefully it's still compatible.
Now I just need to root. Just need to install a nice zip file.
AAAND, I can't seem to push it onto my phone for some reason. Time to search.
Oh, I can just copy and paste this file by enabling USB storage and dragging it over.
I'll just follow the rest of the steps, to no errors! Whoo! I'm free to install any ROM I want!
You'll need a custom recovery for nandroid, but first you will need to root. There's guides in the nexus s general section on doing that.
I kind of like this post.
Sent from my Nexus S using XDA Premium App
apreichner said:
You'll need a custom recovery for nandroid, but first you will need to root. There's guides in the nexus s general section on doing that.
I kind of like this post.
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
I just read through Kursk's guide for rooting the i9020a and i9023 and noticed I have no ability to backup my android in the case something goes wrong.
Am I missing something, or do I have to root before having the privilege of backing up my phone's current ROM.
edit: Got sidetracked by a thread in the Chef's forum and learned that Java is the language for App development for Androids. Been reading about the Android OS and how it works for the past couple of hours. Brains bursting. xd
http://forum.xda-developers.com/showthread.php?t=895545
^ Has pretty much all you need to know for installing a custom recovery and rooting your phone.
It's only once you've installed ClockWorkRecovery Mod that you'll be able to easily make backups.
i am getting the tablet later this week. And since its the same as the advent vega i am hoping to flash a custom rom that supports market and .. well.. better..
i have rooted my HTC Desire Z. But i needed a guide. i guess i need the same with this project.
could someone help me out with something like that. atleast a point in the direction of how..
thanks
Well the way I found the best and easiest for me was to root it with Z4 root (you can find it easily here on XDA forums). It supports Advent Vega tablets and it worked for me like a charm... rooting was done in seconds.
Prior the flashing operation I recommend you to purchase ROM Manager app and use that for the installation of clockwork mod and later for flashing custom ROMs as it is the easiest and most safe way IMO. I'm having this tablet for two days and I've already flashed several ROMs using that way. Of course, I highly recommend you to backup your current ROM just in case. And guess what... you could do that too using the same app
Happy flashing and enjoy your tablet. It's great value for money!
It's reallyyy simple! I did it myself last week with the PoV Mobii..
- First, shut down your tablet.
- Download the recovery mode drivers for your tablet here: http://www.myadventvega.co.uk/SystemUSB.zip
- Extract the files to a folder on your pc.
- Now, connect the tablet to the pc with USB and bring the tablet in recovery mode:
1. Hold the back button 1 second.
2. Press the power button 1 second, but still hold the back button as well
3. Hold the back button 1 second more.
- Now, go to Configuration Panel -> Device Manager, you'll see a device called APX
- Click to update the APX Device drivers with the drivers you extracted a few steps before.
Now the tablet is ready to flash..
Download an arbitrary rom, (I have this one: http://forum.xda-developers.com/showthread.php?t=1221336, search this topic for the exe-version of the Build 9 without updates) and execute the file. The tablet should be updated when finished..
please ask questions in the general section. This is for development only. Thanks!
Mods please move this to general.
Take it easy.
cant seem to find the exe version without updates.
unless its the one mentioned in the first post:
And the last file:
Download VegaComb HC3.2 9b Installer.exe HERE!
This is a windows installer for the 9b Full ROM, you don´t need to install ModdedStock before, it makes it all for you
Click to expand...
Click to collapse
Can vegacomb be installed through ROM maneger?
krankdroid said:
Can vegacomb be installed through ROM maneger?
Click to expand...
Click to collapse
No. But you can install 9n throught CWM. Just remember to flash modded stock v2 first.
Firstly: Copy the main build and update file(If available) to the memory card inside the tablet
Make sure the main build is in the following format "Build.Zip",
Make sure the "Update" is in the following format also "update.zip"
1) run first nvfalsh Modded Stock v2,
1a)Boot-up and conplete installation, Reboot Twice
2)Now select Recovery in Applications
2a)Once you are in recovery, wipe Data, Cache and Dalvik. Select Fix Permissions.
3)Now select Install Main Build zip file form SD card
3a)Select Choose zip file from SD
3b)Select the Build 9n zip file
3c)Wait for it to complete installation and re-boot.
4)Boot it on and power down a few times to make sure it works.
5)Use the shut-down Menu to select Recovery.
5a)Tablet switches off and tries to boot-up, but hangs with a backlit screen.
5b)Press the Power button for 6 seconds to completely switch off the tablet.
5c)Press Power button to boot-up and wait patiently - CWM recovery WILL start.
6)Now select Update file from your SD card
7)After Install,Re-boot
Having recently purchased a TF300T with intent to customize the hell out of it, I ran into a big problem. There wasn't one definitive guide for my general case, some of the steps I read weren't completely clear, and I often had to put pieces together from multiple guides to get where I wanted. Halfway through the process it occurred to me that sharing my experience in form of a guide could give the community something I wish that I had when I began. So enough with the intro, let's visualize the process before we begin.
This guide is for new owners of TF300T devices that have Jelly Bean 4.1.X preflashed from the factory.
joelalmeidaptg said:
If your tablet has 4.2.1 Android version from Asus, DO NOT FLASH A RECOVERY THAT WAS ACTUALLY MADE FOR 4.1 TABLETS! You will end up on a PERMANENT BRICK with no solution until now. You won't be able to use fastboot ever again. You won't be able to flash anything ever again. You will be stuck with a bricked tablet!
If you are looking for a Recovery for a 4.2.1 bootloader (and a complete guide for updating), read this thread: http://forum.xda-developers.com/showthread.php?t=2187982 Don't do it with any other tutorial: they are for 4.1 bootloaders!
Click to expand...
Click to collapse
For those curious...
My TF300T was one of the Champagne Gold models purchased from Groupon with a serial that begins with C9. I recall seeing a user with a Champagne Gold from Amazon that still had ICS. If you're still on ICS, this guide isn't for you-- Read up on NVflash and decide if you want to take advantage of it BEFORE you upgrade to JB.
Here's an overview of what we will be doing:
Click to expand...
Click to collapse
Unlock the TF300T
Backup apps, app data and files (Recommended, Optional)
Install ClockworkMod Recovery (soon to be replaced with TWRP; I gave in)
Root the TF300T (Optional)
Backup your stock Asus ROM (Recommended, Optional)
Flash a Custom ROM
Backup your working Custom ROM (Optional)
Additional information you should know:
Click to expand...
Click to collapse
This guide has been made with the total android noob in mind. Having only owned an android tablet for a week, I too am an android noob. On the flipside, I'm no noob to hardware and software exploits and modifications. I've tried to make this friendly for any type of noob, but there are a few instances where I expect basic menu and Windows 7 navigation skills.
ClockworkMod Recovery doesn't appear to have a "Shutdown" function, nor does it display current battery level-- for this reason, the recommendation and warning to have a battery charged to at least 60% is extremely heavy. The worst thing that can happen to any device is usually an incomplete flash. Don't let it happen to you-- start charging your TF300T NOW.
I have seen reports that "Fastboot" doesn't work properly on Windows 7 64-bit. This guide addresses that issue, as I also encountered it. If you don't know what "Fastboot" is, in the words of an admirable comedian, "You gonna learn today". Don't worry about it for now!
Your device came with JB-- you didn't miss the bus for NVflash. In your case, the bus never came.
I am not responsible for any damages caused to (but not limited to) yourself or your device.
Even if you think you're pretty good at figuring this stuff out, stick to the directions as close as possible.
If you love tweaks, you're going to love your custom ROMs.
Let's get started!
Unlocking Your TF300T
Click to expand...
Click to collapse
WARNING: Unlocking your TF300T will void your warranty. If your device breaks or fails under normal use, don't expect Asus to pick up the tab! Be aware that once unlocked, it cannot be relocked.
There are two ways you can go about this-- Either download the official Asus unlock utility for Windows or download the .apk and install from your tablet (Asus utility still working! I successfully unlocked mine on JB 4.1.1). I chose to download the .apk and install directly on my tablet, therefore this is the method I will cover.
To download the .apk file, scan the QR Code below with Barcode Scanner (free; on Play store) and open the URL to the Asus Support page for the TF300T. Alternatively, if you are viewing this thread on your TF300T, you may simply tap the code below.
On the Asus Support page, select "Android" as your OS. The page will reload and present you with a list. Click on "Utilities", then after it has loaded, download the Unlock Device App. When it is done downloading, a notification will pop up in the lower right corner. Click on it to install the Unlock tool. You'll also be able to open the app immediately after the install completes-- open it now.
After scrolling to the bottom of the End User Licence Agreement, select the checkbox indicating that you agree to those terms. You should now have access to the slider that will unlock your tablet. Stay connected to your wifi and unlock when ready. The unlock will not work without access to the internet.
If I recall correctly, your tablet should reboot. Just let it do what it wants. After it's done doing it's thing, take this opportunity to make backups! when you and your tablet are ready, we'll continue on to the next step.
Setting Up The Android SDK and Installing ClockworkMod Recovery
Click to expand...
Click to collapse
Perhaps this was the most frustrating part of my experience-- Installing the Android SDK went fine when I could actually find the .exe download. After that it was a matter of getting the drivers for Fastboot working properly. I was able to narrow it down to a problem for users of Windows 7 64-bit.
From your PC, go HERE, scroll down and click on "Download For Other Platforms". Scroll down more and under the "SDK Tools Only" downloads, you should find a download that looks like: "installer_r##-windows.exe" where "##" is the revision number. Download this .exe and assuming Windows is installed on C:\, install it to either "C:\tools\android-sdk" or "C:\android-sdk". If Windows is not installed to drive letter C, replace the drive letter with the correct letter for your system. Do the same when following the command prompt examples that follow.
Open the Android SDK Manager. Search for "SDK Manager" in the start menu and you should find a result with the same name and a little android icon. Once it's open, you'll be presented with a list. Check the box next to the "Tools" folder, then expand the "Extras" folder and check the box next to "Google USB Driver". In the lower right corner, click "Install packages...", agree to all when ready and begin your downloads.
In the settings application of your tablet, go to the "Developer options" tab near the bottom. Ensure that the switch in the top right corner is in the "ON" position, then under the "Debugging" header, enable "Android debugging". Read the following carefully before you continue: Shut down your tablet and connect your USB cable. Hold the power and volume down buttons at the same time. Keep holding until you see a menu. The menu will consist of a few items, among them there is "RCK", a USB icon, an Android icon, and a "Wipe Data" icon. Tap volume down until the USB icon is selected, then press volume up. Cross your fingers and hope drivers install automatically.
They probably won't, so have windows look in the \android-sdk\extras\ folder. It should say the drivers installed successfully. Either way, open the start menu, and right click on "Computer". Click "Manage", then in the left hand pane of the new window, click "Device Manager". The "Other Devices" section may be already expanded in the center pane. If it is, look to see if "Fastboot" appears in that section with a yellow exclamation mark.
If it isn't there, you shouldn't be worried-- check for a section called "Android Phone" or "Portable Devices". Look for a device called "Android ADB Interface" or "Fastboot". It shouldn't have a yellow exclamation mark next to it.
In the event you have the device appearing with a yellow exclamation mark next to it, go HERE and download PdaNet. This was my remedy for this error. Unplug your TF300T from your computer and install PdaNet following instructions. During the install a warning will appear to install unsigned drivers. Install the driver anyway, and let the installation finish. You can now plug your TF300T back in, and it should be recognized automatically. Just in case, hold the volume down and power buttons again until your tablet restarts and you see your hidden menu again. Once again, tap volume down until the USB icon is selected, then press volume up again to select it. Check the Device Manager again and you should find the "Android Phone" section at the top. Within it, you'll find a device called "Android ADB Interface".
Now that we have your tablet and computer set up nicely, we can finally install ClockworkMod (CWM) Recovery. Go to THIS thread and download the attachment called "recovery-jb.img" (thanks XpLoDWilD!). It is VERY important that you download "recovery-jb.img" as this is the version for users with Jelly Bean bootloader!
Rename the file you just downloaded to "recovery.img" and place it in \android-sdk\platform-tools . In Windows 7, open the Start Menu and search for "cmd". You should see a result called "cmd.exe". Right click that result and click "Run as Administrator". Now type the following commands into the new command prompt window in order to flash CWM Recovery:
Code:
cd C:\tools\android-sdk\platform-tools\
fastboot -i 0x0B05 flash recovery recovery.img
DON'T unplug your tablet!! Don't close the window either! Wait for the command prompt to finish what it's doing, then you can type the final command:
Code:
fastboot -i 0x0B05 reboot
Your tablet will reboot. Once it has fully rebooted, shut it down and hold volume down and power again to access our tablet's hidden menu. This time, instead of selecting the USB icon, select "RCK" and press volume up. If I'm not mistaken, "RCK" stands for "ReCovery Kernel". ClockworkMod Recovery should load up. If it doesn't, then you were not successful in flashing CWM. If it does, then you can go to the Backup and Restore menu and create a backup.
I was overconfident when I went through all this, and I didn't make a backup-- for me, I wasn't able to get my SD card detected (64GB fat32), but even in this case you should be able to make a backup to your "Internal SD card". Unfortunately, you are on your own for this step. Make sure that you transfer this backup to your PC after creating it. You may need to disable Developer options in your TF300T's settings before you can transfer files over again.
In THIS post, XpLoDWilD gives instructions on how to Root your tablet. If I'm not mistaken, this applies to users who are using a ROM that does not already have root. If you care about Root right now, you can go ahead and flash his attached .zip file using CWM to your TF300T.
When I did this, I selected the .zip file with CWM and then went back to the main menu to select reboot. CWM then prompted me that it needed to fix permissions in order to keep Root. I tried it both ways-- first I let it fix permissions, then used a Play store app to check for root. Test came up negative, so I tried again without allowing it to fix permissions. Negative again. I tried again, allowing it to fix permissions again and then left it alone. If you are successful in rooting your TF300T, you can use Titanium Backup to backup your device later. However I used an app that did not require root that worked fine. The choice is yours.
Flashing a custom ROM
Click to expand...
Click to collapse
Now it's time to find a custom ROM to flash. For my guide I will cover Baked TF300T Blackbean #6-- Based on CyanogenMod10, and quite a nice upgrade from the stock ROM. The only downside I found is the Asus App Backup application is not included and cannot be installed. I'm unsure why this is the case-- I have even attempted to install it via CWM with no success. If you need this app or the App Locker app, I suggest you choose a non-CM10 ROM. You are on your own in deciding an alternative, but I have heard great things about CleanROM and I seem to recall reading that these incompatible Asus apps work on it. Don't take my word for it-- do your own research to make sure!
It should also be noted that ROMs like Blackbean #6 have some potentially dangerous settings that can make a power user salivate profusely.
Spiderman's Dad said:
With great power comes great responsibility
Click to expand...
Click to collapse
Okay, so it was his uncle, whatever. But either way, if you're going to install this ROM (or any other with overclock tweaks), BE CAREFUL when selecting different settings for CPU speed and overclocking. I used to overclock my PC as a hobby and pushed a 1.8GHz CPU to 2.77GHz on air cooling.. The thing I learned in the process is if you don't have the proper settings, your computer becomes unstable and weird things start happening. Data corruption, clicking the Start Menu does something crazy and unusual, PC crashes randomly, etc... Some of these errors are due to insufficient cooling-- a problem you cannot remedy when working with a portable device.
Assuming you are new to this tablet like I am, use this rule of thumb when dealing with foreign and potentially dangerous things: DON'T TOUCH IT until you understand it. Then when you understand it, understand it again. Then when you feel you've understood it twice, take baby steps. It's like jumping up a cement set of stairs-- you're definitely not going to try to jump five steps in your first attempt, unless you want to risk smashing your face and bloodying yourself up. Take it one step at a time-- make sure you can land on your feet before deciding to go further.
There's a lot of other options Blackbean #6 has that the average user can still appreciate, so ignore those overclocking/CPU stuff and focus on the other tweaks. Nova Launcher is included and is pretty sweet. I upgraded to Nova Launcher Prime and feel it's worth the extra $4, but I'll leave that for you to decide. There are more options than merely Nova Launcher alone, and not all of them have a price tag.
Without further adieu, let's download the Blackbean #6 ROM and Gapps. Head over to THIS official release thread for the downloads. The names of the files you want are:
baked_tf300t_blackbean-6_jb-bl_b6.zip
gappsinverted-jb-20121029-signed.zip
Put them into a folder called "bb6" and copy the folder over to your TF300T. If your SD card is working in CWM (from CWM, go to the "mount" menu and try to mount SD card), copy the folder to your SD card.
NOW is the time to do any final backups before your fresh ROM install! I recommend "App Backup & Restore" on the Play store. If your tablet is rooted, you can also use Titanium Backup. Both will work fine, though generally speaking people seem to prefer Titanium Backup. People also seem to prefer TWRP over CWM, but I personally find the design unappealing. More importantly, I could only find a proper guide on installing CWM on a factory flashed JB TF300T.
Once you've made your backups, don't do anything until these backups are safely transferred to your PC! Don't forget to backup your music, movies and photos...
Now that you're 100% confident you've made all the backups you need and your battery is well charged and ready to go, let's flash your custom ROM! Shutdown and enter our hidden menu you should be very familiar with by now. Boot into CWM (with RCK icon from hidden menu selected, press volume up), then press volume up/down to navigate.
READ THE FOLLOWING SECTION BEFORE DOING ANYTHING ELSE:
Select "install zip from sdcard" and tap power. If you placed your "bb6" folder on your SD card, tap the power button once more. If it says "Can't mount /sdcard/" in the bottom left corner, then select "choose zip from internal sdcard" and tap power. Earlier you should have put your ROM and Gapps in a folder called "bb6". If you can't find this folder in either the SD card or internal SD card locations, GO BACK, reboot, and make sure you put the folder on your TF300T or your SD card. You should also make sure that the ROM and the Gapps file are inside that folder as well. Do NOT unzip them! They are just fine as they are. We are NOT flashing the ROM and Gapps yet, we are merely making sure they are there before you wipe your tablet. If the files are there, go back to CWM's main menu.
Select "wipe data/factory reset" and tap the power button. Confirm that you want to wipe, wait for it to finish.
Now select "wipe cache partition" and press the power button. Confirm that you want to wipe, wait for it to finish.
Go back to the main menu and select "advanced" and tap power, then select "wipe dalvik cache" and tap power. Confirm that you want to wipe, wait for it to finish.
Don't worry! Your ROM and Gapps should still be in your bb6 folder. Navigate to "install zip from sdcard" again, and let's make the magic happen. We are going to install the ROM first, then install Gapps. Only after both the ROM and Gapps are installed will we reboot our tablet.
So select the ROM first, confirm that you want to install, wait for it to finish. This one will take a long time compared to the Gapps. Just be patient and wait, even though it looks like it's not doing anything.
Then select the Gapps, confirm that you want to install, wait for it to finish.
Finally, reboot your tablet and cross your fingers. You should be greeted with the sweet victory of the startup animation. Go through the first time setup routine, and make sure the tablet works. From here you can optionally backup your custom ROM, but I recommend getting your settings the way you like them before you backup.
Give yourself a pat on the back--you survived! Hope this guide helped someone out-- I was able to sort through my problems fine, but I felt it important to share my experience. I know I couldn't have been the first to hop through these hoops anyway.
Congrats on your custom ROM Transformer Pad. Enjoy your tablet.
P.S. Questions? Comments? Suggestions? If you have any of the three, feel free to share! If it's a suggestion, please PM me and I'll see about making edits to my guide. All are appreciated, and especially anything that clears up any uncertainties I've expressed.
Special thanks (individuals and groups I owe credit for my process):
Drgravy, Team Baked, and everyone who wrote code that was used in the Blackbean ROMs. Blackbean #6 is my first custom ROM, and so far it's been great!! Keep up the awesome work!
XpLoDWilD, for CWM Recovery + Root on TF300T. These files and instructions were the major keys in making my endeavor a success
I also want to send out a big thank you to every other individual and team who has released a custom ROM for the TF300T-- admirable work, and far more than I could ever do. Thanks for giving us options and making us excited to have a customized tablet!
(....And many more! Currently in finals week (yikes) and can't recall everything right now-- will add more as I remember)
It's a shame that such a well written guide has so little thanks. Have mine.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Very nice. hopefully this helps people just getting the tf300.
note, if you want to install TWRP recovery instead, your command will change accordingly, just make sure you type in the exact file name you want to flash. so if your recovery file is named twrp.blob:
fastboot -i 0x0B05 flash recovery twrp.blob
Thanks!
Your guide helped me a lot. I had problems only with root. Flashed 4 times, but always got "no root acces". Finally, I downloaded root package from here http://forum.xda-developers.com/showthread.php?t=1845377 and it works well
is there any way around that "unknown error..." when i try to use the unlock app yet?
I keep trying but the same error message keeps coming up
sq1ne said:
is there any way around that "unknown error..." when i try to use the unlock app yet?
I keep trying but the same error message keeps coming up
Click to expand...
Click to collapse
Is your tf300 new? first hand? or have u ever sent it to asus for repair before?
Well written, well thought out instructions. Many, many thanks!! I'm still having some trouble though. I get stuck once I download the unlock app, open it, agree to the EULA, then another warning appears that is a black screen white text and a yellow triangle. Nothing happens after that. There are no buttons to agree, no checkboxes, nothing happens. Any advice?
*UPDATE* Figured it out. Be sure to sent the font in settings->display->font size to small, then you will see it. The large font pushes the agree button off the bottom of the screen.
It would be great if CWM in this OP were replaced with TWRP. Many are having issues with CWM. Me being one of them. I flashed TWRP with fastboot and no more problems!
I agree with the post above. Sad that such a well written post has so little thanks. :good:
thnx for this amazing guide, but I am still unsure of this guide will work for me.
I am from Holland (Europe)
specs from my ASUS Transformer TF300T:
Android 4.1.1
Kernel 3.1.10 ([email protected])
Buildnr JR003C.WW_epad-10.4.2.18-20121122
Pad EC Version PAD-EC20T-0216
My question is...will this guide also work for me? ...since I have JB 4.1.1 & build 10.4.2.18
I am also worried about the fact that this guide in for an american(?) transformer I gues...so do I need other files then the files mentioned?
I would love to have ROOT and install a custom rom and remove bloatware etc.
thnx for the help in advance!
Thank you so much, perfect for so many people here.
Can you edit it with TWRP? I would use this right now but as above poster said there have been issues with CWM so don't want to try it.
P.s. i got mine from groupon too
Tamaskan said:
Is your tf300 new? first hand? or have u ever sent it to asus for repair before?
Click to expand...
Click to collapse
bought mine brand new just this past Black Friday.
updated to .18 firmware
I don't want to have to send it in.
GodfleshNL said:
thnx for this amazing guide, but I am still unsure of this guide will work for me.
I am from Holland (Europe)
specs from my ASUS Transformer TF300T:
Android 4.1.1
Kernel 3.1.10 ([email protected])
Buildnr JR003C.WW_epad-10.4.2.18-20121122
Pad EC Version PAD-EC20T-0216
My question is...will this guide also work for me? ...since I have JB 4.1.1 & build 10.4.2.18
I am also worried about the fact that this guide in for an american(?) transformer I gues...so do I need other files then the files mentioned?
I would love to have ROOT and install a custom rom and remove bloatware etc.
thnx for the help in advance!
Click to expand...
Click to collapse
Yes, it will work, I've tried it. But i suggest you use TWRP custom recovery though. CWM has high chances of getting bricked.
Tamaskan said:
Yes, it will work, I've tried it. But i suggest you use TWRP custom recovery though. CWM has high chances of getting bricked.
Click to expand...
Click to collapse
Could you also please add a NOOB tutorial for installing TWRP Recovery (this forum is very confusing in getting the right tutorials / avoiding outdated tutorials which would brick my TF300T etc)?
Example:
quote from XDA forum in TWRP topic: "The fastest and easiest way to install TWRP is to use the GooManager app" <--- GooMnager needs ROOT so I can't use this method?
My ASUS TF300T is completely untouched & unrooted still and don't won't to mess it up.
GodfleshNL said:
Could you also please add a NOOB tutorial for installing TWRP Recovery (this forum is very confusing in getting the right tutorials / avoiding outdated tutorials which would brick my TF300T etc)?
Example:
quote from XDA forum in TWRP topic: "The fastest and easiest way to install TWRP is to use the GooManager app" <--- GooMnager needs ROOT so I can't use this method?
My ASUS TF300T is completely untouched & unrooted still and don't won't to mess it up.
Click to expand...
Click to collapse
www.mediafire.com/?7v1gwbbzqzvzto7 <- fastboot and twrp, the twrp is out dated so if you want you can download new one from twrp website.
2)Extract the recovery with fastboot files zip and open a command prompt in the same folder of the adb and fastboot files (you must click the fastboot and adb when extracred and i suggest you put your extracted fastboot and recovery zip in C:\(foldername) and then open cmd)
3) Reboot into the bootloader of your tablet, type: adb reboot bootloader
4) When your tablet has reached the bootloader navigate with volume down to the usb icon and press volume up to confirm.
5) To flash the recovery type:
fastboot -i 0x0b05 flash recovery tf300t-jb.blob
Credits to krabappel2548.
Tamaskan said:
www.mediafire.com/?7v1gwbbzqzvzto7 <- fastboot and twrp, the twrp is out dated so if you want you can download new one from twrp website.
2)Extract the recovery with fastboot files zip and open a command prompt in the same folder of the adb and fastboot files (you must click the fastboot and adb when extracred and i suggest you put your extracted fastboot and recovery zip in C:\(foldername) and then open cmd)
3) Reboot into the bootloader of your tablet, type: adb reboot bootloader
4) When your tablet has reached the bootloader navigate with volume down to the usb icon and press volume up to confirm.
5) To flash the recovery type:
fastboot -i 0x0b05 flash recovery tf300t-jb.blob
Credits to krabappel2548.
Click to expand...
Click to collapse
Here is a little update on my progress...
- I unlocked the bootloader of my TF300T
- I managed to install latest TWRP
- Made a (COMPLETE) backup of the untouchedl system with TWRP <--- DO THIS BEFORE ANYTHING ELSE!
- Rooted the TF300T with the WW file in this topic: http://forum.xda-developers.com/showthread.php?t=2033205 <----works awesome!
- Made a second (COMPLETE) backup of the now ROOTED system with TWRP
- Tried installing the latest "Cleanrom 3.01 Inheritance", but got the infamous "bootloop" too...the rom has been pulled down from the forum till that is fixed ( I thought I had done something wtong flashing a custom rom, but actually a lot of others had the same problem)
- Waiting for a "bootloop fixed" Cleanrom Inheritance 3.02....and gonna try flashing it again.
first of all thanks a lot ive been going crazy looking for this!! my question is will it work for me?
i bought my tf300t in sept with ics and upgraded to jb....
also i tried this not to long ago and ran into a problem after i unlocked
so right now its just unlocked but not rooted do i need to reverse that or what?
my apologies im extremely noob haha
GodfleshNL said:
Here is a little update on my progress...
- I unlocked the bootloader of my TF300T
- I managed to install latest TWRP
- Made a (COMPLETE) backup of the untouchedl system with TWRP <--- DO THIS BEFORE ANYTHING ELSE!
- Rooted the TF300T with the WW file in this topic: http://forum.xda-developers.com/showthread.php?t=2033205 <----works awesome!
- Made a second (COMPLETE) backup of the now ROOTED system with TWRP
- Tried installing the latest "Cleanrom 3.01 Inheritance", but got the infamous "bootloop" too...the rom has been pulled down from the forum till that is fixed ( I thought I had done something wtong flashing a custom rom, but actually a lot of others had the same problem)
- Waiting for a "bootloop fixed" Cleanrom Inheritance 3.02....and gonna try flashing it again.
Click to expand...
Click to collapse
i never backup.... I only backup app using titanium backuo, if something on the rom goes wrong i just reflash latest firmware from asus website. If you like custom roms, i suggest you use Energy Rom if you want OC or Hydro rom if you want just modified stock rom with better performance.
I have a problem while I try to run the flash recovery command. I have done all steps prior to this.The only difference I see is in device manager I get "ASUS Android Devices". Now, the error I am getting comes after trying to run the command, I get "error: cannot load 'recovery.img' No error" . I have also tried the pdanet solution. Thank you for your help in advance.
Stupid question... but I am going to ask it. Having never rooted my TF300 it is on latest firmware will this guide still apply to be even though I bought my device running ICS but have updated to latest firmware? Have never rooted tablets before so all new to this.
Agera said:
Stupid question... but I am going to ask it. Having never rooted my TF300 it is on latest firmware will this guide still apply to be even though I bought my device running ICS but have updated to latest firmware? Have never rooted tablets before so all new to this.
Click to expand...
Click to collapse
It will work as long as you are using Jelly Bean
so i recently got the 2012 nexus 7 from my step daughter she wasnt using. i replaced the usb port cause it was messed up. im trying to root it and im following some guides and it says to make sure usb debugging is checked but i cant find it. im on 4.4.4 latest one and cant find it at all anyone shed some light on it please
nvm got it
still cant get the dang thing to root. i got recovery in there and everything but when i go to super user it says no su binary installed
ok i cant find anything can someone point me in right direction ive tried a couple different ones and none work
Hey man,
Use search in future, please
But here's what you need. I did this with my "virgin" Nexus 7 2012 (virgin by means, it ran over 1 year stock).
http://forum.xda-developers.com/showthread.php?t=1741395
But in step 4, instead of CWM, i flashed TWRP recovery, because I like it more. Process remain the same.
But PLEASE ! Read before you attempt to do anything.
I did search for like 3 hours trying to find something that would work with 4.4.4 and never came across this but thank u I'll take a look. I already have it unlocked and clock work instilled but I guess I can't get super user to install. I'm not sure
bjballar41 said:
I did search for like 3 hours trying to find something that would work with 4.4.4 and never came across this but thank u I'll take a look. I already have it unlocked and clock work instilled but I guess I can't get super user to install. I'm not sure
Click to expand...
Click to collapse
Hi, bjballar41...
Rooting the Nexus 7 is a piece of cake... well, I think so anyway.
Essentially, it's a three stage process...two of which you've already accomplished.
1) Unlock the bootloader. Check... YOU'VE DONE!
2) Flash a Custom Recovery. Check... YOU'VE DONE! (ClockWorkMod installed).
*****
3) Using that Custom Recovery, flash ChainFires SuperSU root package. YET TO BE DONE...
-----------------------
Here's how...
The third piece of this jigsaw can be found here...
http://download.chainfire.eu/567/SuperSU/UPDATE-SuperSU-v2.13.zip
Using Chrome (or whatever Android browser you favour) download it directly to your Nexus 7.
Chrome, and most Android browsers, download stuff to the /download folder on your device. Wherever it gets downloaded to, it's important that you take note of it's location.
-----------------------
Next, boot into your Custom Recovery (CWM), as follows...
** Fully shut down the device.
** With your N7 shut down... press & hold the VOL DOWN button... whilst holding, press POWER ON.
** Your N7 should now boot into the bootloader.
** Using either of the volume buttons, cycle through the options until you see the RECOVERY MODE option. Press the Power button to select it.
** Your Nexus 7 should now boot into your Custom Recovery, CWM.
** From the the CWM menu options, select the following...
- install zip
- choose zip from /sdcard
- select 0/ from the menu option
- navigate to the folder where you downloaded the UPDATE-SuperSU-v2.13.zip file to earlier
** Select it, and confirm... YES - Install UPDATE-SuperSU-v2.13.zip.
** Then tap Go Back (at the bottom) followed by Reboot System Now.
** Ignore any 'Fix Root messages'... this is a spurious CWM error message. Ignore it, and just proceed with a reboot.
-----------------------
Your Nexus 7 should now be rooted. ...hopefully...
I've just run this exact procedure on my Nexus 7, and I had no problems at all.
You can check you have root via a plethora of root checking tools available on PlayStore, or just by installing and running Titanium.
Good luck, and hope this helps.
Rgrds,
Ged.
That worked thanks. Any suggestions on a custom rom
bjballar41 said:
That worked thanks. Any suggestions on a custom rom
Click to expand...
Click to collapse
I would recommend you to convert to f2fs and use ART.
Try slimkat(all-f2fs) its fast and never slows down even after a month and tons of apps.
For playing around you can try Liquid smooth or Mahdi.
What do I have to do to convert to f2fs? Im so rusty I haven't put a ROM on since galaxy s2
With Barnes & Noble now selling the Galaxy Tab S2 710 (32gb) for $299 in the U.S. (and an extra 10% off if you're a B&N member), I picked one up yesterday and immediately came here to research rooting and set up. What I found were a lot of guides written a while ago, and a lot of confusing (at least to me) information. So I thought I would consolidate, in one place, in a new thread, what I eventually did, on the assumption that there might be a lot of new Tab S2 owners in the coming weeks. Obviously, you undertake these steps at your own risk, and YMMV. Also, hopefully equally obviously, none of the fantastic tools here are original with me -- credit goes to all those, like chainfire, ashyrx, wanam, engine95 and many more who have built and/or developed them.
1. If your Tab comes with anything but 5.1.1 XXU2BPB1, feel free to take the OTA update. In the US, it's the most current build as of 4.30.16 and you will still be able to root.
2. If you don't already have it, download Odin 3.10.7. You can find it here: http://forum.xda-developers.com/showthread.php?t=2711451
When you run Odin in Windows, probably better to run it in administrator mode (right click on the icon), although I haven't always found that to be necessary.
3. Flash a Custom Recovery using the PDA tab of Odin. Put your Tab into Download mode by turning it off, then pressing and holding the Home, Power and Volume Down buttons all at the same time. When the download screen comes up, press the Volume Up button to continue. Now you're ready to attach your Tab to your PC. Load TWRP 3.0.2-1 from Ashyx's thread here: http://forum.xda-developers.com/tab-s2/development/recovery-twrp-2-8-7-x-lollipop-5-1-1-t3205686 into Odin. Follow his instructions carefully -- once the custom recovery flashes, you have to manually reboot into the new recovery (so untick the auto-reboot option in Odin) or else your new custom recovery gets overwritten and you go back to your stock recovery.
4. Backup your Stock Rom -- While you're still in TWRP (or if you've already rebooted, go back to it), it would make sense to do a full backup of your stock ROM. That way you can restore your Tab to its original state if you ever need or want to.
5. Root -- Here's where I found the most confusion on these forums. You can do a systemless root -- i.e., keeping a stock, SE Enforcing, kernel (as opposed to flashing a permissive kernel and always getting the red SE Noneforcing Kernel message on a reboot and/or needing to use CF-Auto-Root). All you need to do is install Super SU 2.71 (BETA). Get the zip from here: http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133 and put it on your Tab. Then flash using the "Install" choice within your TWRP recovery. Reboot -- and when TWRP asks you whether you want to install SuperSU because you're not rooted -- you have to say "NO" (OK, that's counterintuitive, but chainfire's instructions are clear).
5. Debloat -- That's beyond this thread's scope, but I recommend Titanium Backup from the Play Store. If you want to get rid of the "Nook" logo on reboot, flash the zip file from post #2 of Engine95's thread (using TWRP) found here: http://forum.xda-developers.com/tab-s2/development/rom-neked-nook-oj1-5-1-1-710-t3317823
6. SD Card Fix -- if you find your third party apps can't write to your SD Card, the attachment below describes how to fix it. If this type of editing scares you (make a backup first!), the Play Store app SD Card Fix supposedly still works with Lollipop and you can try that.
7. Netflix Fix -- for some reason, Netflix doesn't like root on the Nook Tab. The fix for this is as simple as renaming the file "system/lib/liboemcrypto.so" (using a root explorer of your choice) as "system/lib/liboemcrypto.so.bak"
8. Xposed -- I happen to like Xposed and don't find it messes up anything, while giving you a ton of customization options. Installation is a two-step process. First, find the correct version of wanam's Xposed zip from here: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960, and flash it using TWRP. For Lollipop on the S2, I used his SDK 22-arm version (SDK 23 is for Marshmallow). Don't worry if the reboot takes a long time -- that's normal. Then, once rebooted, simply install wanam's Xposed apk (XposedInstaller_3.0_Alpha4) that's available in the same thread.
That's it. I hope this saves some of you a lot of my trial and error, and, if it does, please press the "thanks" button.
EDIT -- Here's a #9 I just discovered --- Microsoft Office apps, although pre-installed on the device, will not open once you're rooted (or maybe it's just flashing TWRP that does it). Moreover, if you uninstall and try a re-install from the Play Store, if you're like me, you'll get a device not compatible message. My solution was to sideload the apks (e.g., Word, Excel and Powerpoint) from my Note 4, but I suspect you could also change your device ID within your build.prop file (backup first!) and get a similar result.
ANOTHER EDIT (5.2.16) -- #10 -- I can't get Google Play Movies to work at all on my T710 after rooting. Tried renaming libemcrypto.so without luck. Tried editing boot.prop to disguise myself as a Nexus 10. Tried the Xposed module Root Cloak. All no good. Any suggestions welcome!
Thanks! I just got a new nook and have started to come into these forums and also noticed the old and randomly updated threads. I appreciate the clear instructions. Are there any roms right now that you are recommending?
rawdikrik said:
Thanks! I just got a new nook and have started to come into these forums and also noticed the old and randomly updated threads. I appreciate the clear instructions. Are there any roms right now that you are recommending?
Click to expand...
Click to collapse
Sorry, I'm trying to stick with stock. Engine95's rom seems to have some happy users though....
how do you manual reboot to recovery mode after download mode? i have tried the (pwr+vol up+home) but it does not work at all.. once i reboot normally the TWRP which i flashed cannot get installed at all. I need HELP!