Flashing a ROM over stock in SafeStrap? - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

Forgive me if there are any posts about this already, but I didn't find any when I searched. I am trying to find out if I can flash a ROM over the stock ROM slot in SafeStrap. The FAQ says it's not recommended because you can't ODIN back to MF3, but I though that was fixed? I only ask because I have a few rather large apps and I've run out of room. Correct me if I'm wrong, but flashing over stock would allow me more space rather than having two ~4gb partitions. If I flash over stock, wouldn't I have ~8gb free? If I'm getting anything confused please correct me.
With that said, what is the best ROM to flash over stock? Currently I am using graviton in ROM slot 1, but I'm getting somewhat tired of it.
Sent from my SGH-I337 using xda app-developers app

brendon.recce said:
Forgive me if there are any posts about this already, but I didn't find any when I searched. I am trying to find out if I can flash a ROM over the stock ROM slot in SafeStrap. The FAQ says it's not recommended because you can't ODIN back to MF3, but I though that was fixed? I only ask because I have a few rather large apps and I've run out of room. Correct me if I'm wrong, but flashing over stock would allow me more space rather than having two ~4gb partitions. If I flash over stock, wouldn't I have ~8gb free? If I'm getting anything confused please correct me.
With that said, what is the best ROM to flash over stock? Currently I am using graviton in ROM slot 1, but I'm getting somewhat tired of it.
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
I'm using a google play edition 4.2.2. I flashed over stock and it's working fine. I never even made a rom slot. Just put it over stock. You can odin back to mf3 now, that is available now but wasn't at first.

Related

MF3 stock firmware question - Don't bash

First let me say I'm not a noob.. I'm a developer but don't really deal with rooting, etc. So please don't bash...
I tried searching for answers to this question, but couldn't find an exact one..
I have the AT&T S4 with the MF3 OTA update. I want to try and install a custom rom, but in reading the hot to's, it says not to attempt to do it with the mf3 update since it's boot locked. Can I re-install a stock S4 firmware using odin and then, after a stock firmware is installed, then install twrp with a custom rom?
Thanks!
itsdavetime said:
First let me say I'm not a noob.. I'm a developer but don't really deal with rooting, etc. So please don't bash...
I tried searching for answers to this question, but couldn't find an exact one..
I have the AT&T S4 with the MF3 OTA update. I want to try and install a custom rom, but in reading the hot to's, it says not to attempt to do it with the mf3 update since it's boot locked. Can I re-install a stock S4 firmware using odin and then, after a stock firmware is installed, then install twrp with a custom rom?
Thanks!
Click to expand...
Click to collapse
No.
scott14719 said:
No.
Click to expand...
Click to collapse
Ha.. Well, that's an exact answer
There is a method in the works on the VZW forums that will allow custom ROMs on locked bootloaders. We are hoping to get it ported over the our side. Things are looking very promising. This method, known as a safestrap, will also allow multiple ROMs at once. Up to 4 slots. It keeps your stock ROM safe so if you have a bad flash, you can still boot right back and have a functional phone. You are only limited by how much space you have on your internal SD.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
itsdavetime said:
Ha.. Well, that's an exact answer
Click to expand...
Click to collapse
graydiggy said:
There is a method in the works on the VZW forums that will allow custom ROMs on locked bootloaders. We are hoping to get it ported over the our side. Things are looking very promising. This method, known as a safestrap, will also allow multiple ROMs at once. Up to 4 slots. It keeps your stock ROM safe so if you have a bad flash, you can still boot right back and have a functional phone. You are only limited by how much space you have on your internal SD.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Until then, OP, my advise is to just roll on stock/unrooted. Period.
Cheers

To Root and to Tinker--Rooting and Recovery

So, I'm new to the locked bootloader scene. The root & ROM threads, tutorials, and videos seem to root via a Terminal Emulator process, then install Safestrap. Those same sites and videos say that when you're flashing a ROM after selecting a new ROM Slot, you have to flash "whatever modules and packages are for your device", whatever that means. Since I can't find these packages anywhere, is it safe to assume that I can just root, install Safestrap, create a ROM Slot, and start flashing away as if nothing's up? Or do I need to worry about this boot patch and some "Loki Doki" thing I heard about. I'm sure these answers exist, and I've done my due diligence, but these threads have either been buried for good, or are such a common a knowledge subset that I can't find anything concrete. Even the videos I've seen talk about the "modules" you have to flash. I'm an experienced Androidist, tinkerer, and tweaker. The information I'm finding doesn't provide you with the big picture. It's all, "MJ2 read this, and follow these 9 steps", and "mk2 follow these 10 steps". But none of them tell you what to do in Safe strap recovery, and if you needs some Loki/module magic.
Help a brotha out? I'll return the favor 10-fold, I can promise you that much. I'll be quite active around here.
Thanks!
Sent from my Nexus 7 using XDA Premium HD app
First off you never said what baseband you were on but assuming that your on MK2 android 4.3 then let's start.
Use this method to root your device
http://forum.xda-developers.com/showthread.php?t=2569827
Since your on mk2 you can ONLY use safe strap 3.71 do not attempt to install safe strap 3.65 AND SAFE STRAP WILL BE THE ONLY RECOVERY YOU CAN INSTALL!
http://forum.xda-developers.com/showthread.php?t=2448925
And note that 3.71 is still in beta as of right now there are still bugs and YOU CAN ONLY FLASH A COUPLE OF ROMS.
From the same thread cause I know your not going to go through the forums and read, download the attmk2module.zip that ted77usa posted
http://forum.xda-developers.com/showthread.php?t=2448925
Root your device
Install safestrap after install, install recovery in safestrap apk.
There's only a few Roms you can flash
Darthstalker x in the att android development forum
Hyperdrive 12 in the Verizon android development forum download the one that says safestrap
A few have noted that some other Roms work but I haven't tested it out do some more reading.
After you download a rom
Reboot your device and go into safestrap recovery
Create a ROM slot ON ROM SLOT 1
DO NOT MESS WITH YOUR STOCK SLOT!
After creating a ROM slot go to install and install your rom.
After successfully installing a ROM reboot then go back into recovery and install the attmk2module.zip
Reboot and instead of going into recovery this time continue
It will take awhile to load its normal.
Now you should have a ROM.
Now go tinker with that.
AT&T SGH-I337 RUNNING HYPERDRIVE 12
ATTMK2kernelmodules Original Post i don't think u would like to go over 1000 post on that thread..... and at the bottom there is SHOstock_v3.0_Safestrap_Ready link that also confirmed work by several people.......hope this help u to get start it..... .
Bootloader:................Use:...................Custom Rom:
MDL/MDB.......................LOKI.....................4.2.2......4.3.....4.4 ALL WORK (....LUCKY U....)
MF3................................SS-v3.65................ONLY FLASH 4.2.2 ROM (Slot1,Slot2 and Stock ALL WORK)
MK2................................SS-v3.71................SOME 4.3 ROM WORK (Slot1,Slot2 and Stock ALL WORK (confirmed))
[email protected] said:
First off you never said what baseband you were on but assuming that your on MK2 android 4.3 then let's start.
Use this method to root your device
http://forum.xda-developers.com/showthread.php?t=2569827
Since your on mk2 you can ONLY use safe strap 3.71 do not attempt to install safe strap 3.65 AND SAFE STRAP WILL BE THE ONLY RECOVERY YOU CAN INSTALL!
http://forum.xda-developers.com/showthread.php?t=2448925
And note that 3.71 is still in beta as of right now there are still bugs and YOU CAN ONLY FLASH A COUPLE OF ROMS.
From the same thread cause I know your not going to go through the forums and read, download the attmk2module.zip that ted77usa posted
http://forum.xda-developers.com/showthread.php?t=2448925
Root your device
Install safestrap after install, install recovery in safestrap apk.
There's only a few Roms you can flash
Darthstalker x in the att android development forum
Hyperdrive 12 in the Verizon android development forum download the one that says safestrap
A few have noted that some other Roms work but I haven't tested it out do some more reading.
After you download a rom
Reboot your device and go into safestrap recovery
Create a ROM slot ON ROM SLOT 1
DO NOT MESS WITH YOUR STOCK SLOT!
After creating a ROM slot go to install and install your rom.
After successfully installing a ROM reboot then go back into recovery and install the attmk2module.zip
Reboot and instead of going into recovery this time continue
It will take awhile to load its normal.
Now you should have a ROM.
Now go tinker with that.
AT&T SGH-I337 RUNNING HYPERDRIVE 12
Click to expand...
Click to collapse
You're perfect in every way. ? Bromance FTW
You even answer threads like me. This helped a TON! I owe ya one.
Edit: last question. The instructions say to install the ROM, reboot, then install the modules. I assume that the reboot instruction means that we should reboot, boot into the ROM for the first time, then boot back into recovery and install the modules?
Or should I flash the ROM, power down, then boot into recovery (ensuring that the ROM is never booted before the modules are installed)-- I suppose I could just use the reboot recovery option in the Safestrap TWRP.
Sent from my Nexus 7 using XDA Premium HD app
ted77usa said:
ATTMK2kernelmodules Original Post i don't think u would like to go over 1000 post on that thread..... and the on the bottom is SHOstock_v3.0_Safestrap_Ready link that also confirmed work by several people.......hope this help u to get start it..... .
Bootloader:................Use:...................Custom Rom:
MDL/MDB.......................LOKI.....................4.2.2......4.3.....4.4 ALL WORK (....LUCKY U....)
MF3................................SS-v3.65................ONLY FLASH 4.2.2 ROM (Slot1,Slot2 and Stock ALL WORK)
MK2................................SS-v3.71................SOME 4.3 ROM WORK (Slot1,Slot2 and Stock ALL WORK (confirmed))
Click to expand...
Click to collapse
What's SHOStock? An alternative to the ATTMK2Module?
<3 I can see that this is a bangin' start to an awesome and new relationship, between me, my S4, and my new home...the S4 community.
Sent from my Nexus 7 using XDA Premium HD app
By the way...since the ROM selection is limited, I assume heavy XPosed use is okay, and quite common?
Which ROM do you guys prefer?
I assume that sites and articles like this one: http://www.droidviews.com/best-custom-roms-for-att-samsung-galaxy-s4-sgh-i337/
aren't reliable sources--they probably don't take into account the the ATT S4 compatibility issues. This is showing CM11, Carbon, KangaBean, Infamous...am I correct in my assumption that those are for the lucky birdies that had MDL/MDB, and didn't need Safestrap?
Has someone put together a compatibility/guide megathread? I think I will if it hasn't been done.
Sent from my Nexus 7 using XDA Premium HD app
Jamesyboy said:
What's SHOStock? An alternative to the ATTMK2Module?
<3 I can see that this is a bangin' start to an awesome and new relationship, between me, my S4, and my new home...the S4 community.
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
Welcome aboard!!!! Firstable are u on MF3 firmware or MK2 frimware......? both are using SafeStrap (SS) as custom recovery as of right now. Like i said on previous post MF3 use SS-v3.65 so that u able to install only 4.2.2 TW custom rom or 4.2.2 Google Play Edition (GPE) rom. If u are on MK2 firmware u can only use SS-v3.71 and able to install some of 4.3 custom rom (SHOstock-v3.0-Safestrap-Ready) is one of them that worked......Hyperdrive-RL12 from verizon thread also seem pretty good but u need to add your APN manually if u are on ATT network. Both firmware MF3 and MK2 are use different kernel modules, so after flashing custom Rom you NEED to flash your current firmware kernel modules also, otherwise u won't be able to connect to WiFi,bluetooth,gps etc..... hope this make sense to you......i know is kinda confusing ......but the more u read is the more it would make sense.... Check this thread for list of compatible rom Official AT&T S4 Safestrap Discussion Q/A
One more thing. My S4 will be here tomorrow. Let's say I get lucky and find MDL/MDB on my device. Do I need to hurry and avoid a software update, or avoid a data connection? Or do the updates proceed only with user interaction? The rooting is the same for all 3 devices, but if I do get MDL/MDB or the next one, I'll have to update the baseband before flashing newer ROMs, right?
Sent from my Nexus 7 using XDA Premium HD app
ted77usa said:
Welcome aboard!!!! Firstable are u on MF3 firmware or MK2 frimware......? both are using SafeStrap (SS) as custom recovery as of right now. Like i said on previous post MF3 use SS-v3.65 so that u able to install only 4.2.2 TW custom rom or 4.2.2 Google Play Edition (GPE) rom. If u are on MK2 firmware u can only use SS-v3.71 and able to install some of 4.3 custom rom (SHOstock-v3.0-Safestrap-Ready) is one of them......Hyperdrive-RL12 from verizon thread also seem pretty good but u need to add your APN manually if u are on ATT network. Both firmware MF3 and MK2 are use different kernel modules, so after flashing custom Rom you NEED to flash your cureent firmware kernel modules also otherwise u won't be able to connect to WiFi,bluetooth,gps etc..... hope this make sense to you......i know is kinda confusing ......but the more u read is the more it would make sense....
Click to expand...
Click to collapse
It makes sense, I'm mostly just unfamiliar, as opposed to being completely useless, but you guys have been amazing...you've already shot me up to about 80% on a distribution curve.
Why would anyone stick with MF3? MK2 is an update for MF3, right? Why don't those users update, then safestrap 3.71 it, so they can use 4.3 roms? It'd seem kinda funky to me to be stuck with a 4-2 ROM by choice, unless they're doing it solely for the GPE ROM.
These firmware kernel modules...I'll have the same modules for each ROM I flash right? Or are these modules a .zip that I'll find in each ROM thread, for each carrier.
By the way, APN settings don't scare me. Here, you might actually appreciate this work--done right after ATT's LTE network came online (I believe the Note was the first device that utilized it?...If it wasn't, it was definitely the first to tax the network.)::
http://forum.xda-developers.com/showthread.php?p=26877683
Edit: the Q&A thread for Safe strap was reasonable...but it still talks about kernel flashes, and blown QFusee (har?)
I guess I mainly need to come to grips with the kernel situation. The Q&A says that you can't use custom kernels if you've updated to OTA, but doesn't mention factory MF3 builds, and it isn't really very clear about the module/kernel module situation.
You said I need to flags my **current** firmware kernel modules: are those different if I get a device with MF3 than those for MK2? Or are these just modules that I create myself (based upon whatever's in my stock ROM slot maybe?) in recovery?
Sent from my Nexus 7 using XDA Premium HD app
Jamesyboy said:
One more thing. My S4 will be here tomorrow. Let's say I get lucky and find MDL/MDB on my device. Do I need to hurry and avoid a software update, or avoid a data connection? Or do the updates proceed only with user interaction? The rooting is the same for all 3 devices, but if I do get MDL/MDB or the next one, I'll have to update the baseband before flashing newer ROMs, right?
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
I dont think u can get MDB/MDL firmware again these days.....but if u do....damn u are pretty lucky....my suggestion is Do Not insert your ATT sim card yet ....since they can do OTA update ( On The Air ).....and check your baseband....IF u do ....root it right away....install titanium back up and freeze/uninstall ATT software update.apk......install custom recovery CWM or TWRP ..... and make sure u have auto loki recovery....if not save loki.doki patch on your Sd Card....PM me for the link and all the files .....i still have the files since i used to have MDB firmware and got replacement phone from ATT when my son broke the screen....:crying:
Jamesyboy said:
It makes sense, I'm mostly just unfamiliar, as opposed to being completely useless, but you guys have been amazing...you've already shot me up to about 80% on a distribution curve.
Why would anyone stick with MF3? MK2 is an update for MF3, right? Why don't those users update, then safestrap 3.71 it, so they can use 4.3 roms? It'd seem kinda funky to me to be stuck with a 4-2 ROM by choice, unless they're doing it solely for the GPE ROM.
These firmware kernel modules...I'll have the same modules for each ROM I flash right? Or are these modules a .zip that I'll find in each ROM thread, for each carrier.
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
MDB>MDL>MF3>MJ6>Mj9>MK2.......the reason of the update is ATT trying to lock bootloader so we won't be able to install custom rom or do what ever we want to the phone.......but either way.....XDA member always found away to cracked it....so some people have to upgrade not by choice.....most of them by accident....like me ( cracked my screen ) or they install wrong recovery.....(bricked) so be careful when installing custom recovery.....like i said....we need to know what kinda firmware that u have so we can help u.....LOL now i got it why u dont know yet....since u dont have the phone yet.......... but is ok.....that's the right thing to do.....get to know your stuff first before u brick your phone.....:good: so basically u need to match your kernel modules with your firmware otherwise it won't be able to connect to Wifi,bluetooth,gps,etc it doesn't matter if u OTA to MF3 or MK2.....or it come with MF3 or MK2....
ted77usa said:
I dont think u can get MDB/MDL firmware again these days.....but if u do....damn u are pretty lucky....my suggestion is Do Not insert your ATT sim card yet ....since they can do OTA update ( On The Air ).....and check your baseband....IF u do ....root it right away....install titanium back up and freeze/uninstall ATT software update.apk......install custom recovery CWM or TWRP ..... and make sure u have auto loki recovery....if not save loki.doki patch on your Sd Card....PM me for the link and all the files .....i still have the files since i used to have MDB firmware and got replacement phone from ATT when my son broke the screen....:crying:
MDB>MDL>MF3>MJ6>Mj9>MK2.......the reason of the update is ATT trying to lock bootloader so we won't be able to install custom rom or do what ever we want to the phone.......but either way.....XDA member always found away to cracked it....so some people have to upgrade not by choice.....most of them by accident....like me ( cracked my screen ) or they install wrong recovery.....(bricked) so be careful when installing custom recovery.....like i said....we need to know what kinda firmware that u have so we can help u.....LOL now i got it why u dont know yet....since u dont have the phone yet.......... but is ok.....that's the right thing to do.....get to know your stuff first before u brick your phone.....:good:
Click to expand...
Click to collapse
Groovy! I'll check back in tomorrow! Happy New Years!
(Sent you a PM, as well.)
Sent from my Nexus 7 using XDA Premium HD app

Kitkat download failure

I posted in the noob thread with no response. .I've searched xda and the net via google.
My issue is non logical and selective programs that will not allow down loading to the internal storage. .yes I saw the long list of not downloading to the sd card, but mine is internal memory. The external sd works fine.
I was running bone stock 4.4.2 for a week no issues. I rooted via cf autoroot and lost ability to save files from any program I found ..zedge..swift key language pack..chrome etc.
Last night did a full wipe and factory reset in twrp. Then restored from backup the stock nae found here
http://forum.xda-developers.com/showthread.php?p=50668765
And still have same issues except this time Internet Explorer is allowing image downloads to the internal memory?? Other programs are still the same.
Thanks
EDIT
Update - Found TWRP has an issue that causes loss write abiltity to internal storage with some roms after you do a restore...read about in in the Sacs Thread
Sent from my SPH-L720 using Tapatalk
So, tryed flashing unknowns stock rom and after multiple fix permissions wipes etc AND reading about 20 plus pages of the thread, had more problems than the other stock rom
Seems others had internal download issues, but maybe some kind person here could direct me to a solution as they did not appear to have one?? At this Time, Im sorry I ever rooted this thing...S3 and all my old phones rocked..this thing stinks...thanks samsung.... anyway...is there anyway to return to stock, I know I did it on MK2, just not sure on NAE and just dont wanna screw this thing up more than it is
ibcenu said:
So, tryed flashing unknowns stock rom and after multiple fix permissions wipes etc AND reading about 20 plus pages of the thread, had more problems than the other stock rom
Seems others had internal download issues, but maybe some kind person here could direct me to a solution as they did not appear to have one?? At this Time, Im sorry I ever rooted this thing...S3 and all my old phones rocked..this thing stinks...thanks samsung.... anyway...is there anyway to return to stock, I know I did it on MK2, just not sure on NAE and just dont wanna screw this thing up more than it is
Click to expand...
Click to collapse
Stock unrooted NAE? If so, download the tar that is on Dev section by random45. Use Odin to flash it. Back up anything important just in case.
Sent from my SPH-L720 using Tapatalk
daniel4653 said:
Stock unrooted NAE? If so, download the tar that is on Dev section by random45. Use Odin to flash it. Back up anything important just in case.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
OK thanks..I'll give it a try
Sent from my SPH-L720 using Tapatalk
I was having the same problem with sac's rom v2. I am now running Negalite WonderRom r19. Downloads are fast. I recommend this rom.
Sent from my SPH-L720 using XDA Premium 4 mobile app
So I found the culpert. TWRP recovery. I went back to unrooted stock and started over.. TWRP seems to work great, but after flashing a couple roms, then restoring my Stock rooted version of 4.4.2.. I lost write to internal again
Last night started reading thru Sacs thread and found it to be an issue for some and not others. I still do not fully know, but in reading, some say TWRP works, just not with all roms
ibcenu said:
So I found the culpert. TWRP recovery. I went back to unrooted stock and started over.. TWRP seems to work great, but after flashing a couple roms, then restoring my Stock rooted version of 4.4.2.. I lost write to internal again
Last night started reading thru Sacs thread and found it to be an issue for some and not others. I still do not fully know, but in reading, some say TWRP works, just not with all roms
Click to expand...
Click to collapse
Just throwing this out there.. I've had no problems at all using Philz Recovery. Even with the ROMs that say TWRP is recommended. Its never let me down maybe worth a shot?!
Sent from my SCH-I545 using Tapatalk

ATT S4 KitKat 4.4.2 - Is Cyanogenmod possible? alts...

Hi All,
Appreciate the guides and community here. Looking for a little help on my ATT S4 KitKat 4.4.2. It's rooted via Towelroot.
I want to run a custom rom that isn't slow. I have Odin, proper Samsung USB drivers.
1) Can CNW be used on my phone to boot to recovery? If not, what are the alternatives and how do I use them (is there a guide you can share)?
2) Do I have NC1 on my phone, what the heck is NC2, NC1-what does this mean, is it relevant?
Thanks all
-Christian
If you have updated your phone to the att 4.4.2 firmware then you should be on NC1 which means you cannot put cwm or any CM rom. The only recovery you can use is safestrap. After that you can only flash rooms the specifically say safestrap compatible and you must flash the att_nc1 module after flashing rom for WiFi to work. Read the safestrap thread under the development section before doing anything.
Sent from my GT-P3110 using Tapatalk
Thanks for the help-trying it out now. Will keep ya posted
freestylejunki32 said:
If you have updated your phone to the att 4.4.2 firmware then you should be on NC1 which means you cannot put cwm or any CM rom. The only recovery you can use is safestrap. After that you can only flash rooms the specifically say safestrap compatible and you must flash the att_nc1 module after flashing rom for WiFi to work. Read the safestrap thread under the development section before doing anything.
http://forum.xda-developers.com/showthread.php?t=2572978
Sent from my GT-P3110 using Tapatalk
Click to expand...
Click to collapse
Is this the thread you were referring to?
http://forum.xda-developers.com/showthread.php?t=2572978
Yes, I would also read over All Things ATT/MK2 etc in General--:good:
Those numbers NC1 etc are your build version. Can be found under Settings/About Phone. It will dictate what you can and can't do on your phone--We have no NC2 yet. :good:
rugmankc said:
Yes, I would also read over All Things ATT/MK2 etc in General--:good:
Those numbers NC1 etc are your build version. Can be found under Settings/About Phone. It will dictate what you can and can't do on your phone--We have no NC2 yet. :good:
Click to expand...
Click to collapse
Thanks. I have nb1. No luck getting safe strap to take. Install completes but does not recognize status as installed or allow boot to recovery.
I have rooted, supersu, busybox, and no luck with safestrap. Any ideas.
Upon booting I notice an icon that looks like a unlocked lock beneath the samsung logo. Touching it does nothing...
Thanks for getting back to me
potat5656 said:
Thanks. I have nb1. No luck getting safe strap to take. Install completes but does not recognize status as installed or allow boot to recovery.
I have rooted, supersu, busybox, and no luck with safestrap. Any ideas.
Upon booting I notice an icon that looks like a unlocked lock beneath the samsung logo. Touching it does nothing...
Thanks for getting back to me
Click to expand...
Click to collapse
I don't use safestrap. So not sure. Did you wipe all including system. And flash to correct slot. Stock slot I believe. Use correct safestrap. Also need sellinux, spelling? The lock is suppose to be there if rooted. Read the last 20 pages of the hash code safestrap thread plus the op. And same on All Things ATT/MK2 in General. May give some ideas. ☺
Sent from my GT-I9505G using Tapatalk
rugmankc said:
I don't use safestrap. So not sure. Did you wipe all including system. And flash to correct slot. Stock slot I believe. Use correct safestrap. Also need sellinux, spelling? The lock is suppose to be there if rooted. Read the last 20 pages of the hash code safestrap thread plus the op. And same on All Things ATT/MK2 in General. May give some ideas. ☺
Sent from my GT-I9505G using Tapatalk
Click to expand...
Click to collapse
Aha! Safestrap running and custom ROM installed. Is there an index comparing all Safestrap/Touchwiz based roms? Runnign SHO right now and it's pretty bland (resolution looks low too).
I'm looking for something like a stock nexus experience with WiFi tethering.
thanks for the help mates
potat5656 said:
Aha! Safestrap running and custom ROM installed. Is there an index comparing all Safestrap/Touchwiz based roms? Runnign SHO right now and it's pretty bland (resolution looks low too).
I'm looking for something like a stock nexus experience with WiFi tethering.
thanks for the help mates
Click to expand...
Click to collapse
Not sure on index. Best though to try them yourself as they don't always work the same on different phones.
Sent from my GT-I9505G using Tapatalk
potat5656 said:
Aha! Safestrap running and custom ROM installed. Is there an index comparing all Safestrap/Touchwiz based roms? Runnign SHO right now and it's pretty bland (resolution looks low too).
I'm looking for something like a stock nexus experience with WiFi tethering.
thanks for the help mates
Click to expand...
Click to collapse
Iam all for custom ROMS. I made one for the Tab3. If all you want is the stock Nexus experience, you could just download the Google Now Launcher which is Google release the AOSP launcher. Then if you want the individual AOSP apps, you can do a search here or a google search, and you will find XDA threads that provide the apps with installation instructions.

[Q] Need Help Flashing Roms

I'm extremely new at rooting and flashing roms, so please excuse my ignorance. I have a Verizon Note 3 SM-900V. I'm running Android 4.4.2 and my Baseband version is NC4. I've rooted it using"TowelRoot" and have installed Safestrap 3.72. I've booted into recovery partitioned slot 1 and wiped it. Then I installed HyperdriveRLS7.zip I hit reboot after it says it's finished installing the rom. Whenever I try to boot into the rom (slot 1), my screen goes black and my blue LED light stays on. I also tried flashing the rom named "hltevzw.Jellybeans.zip" and it does the same thing. Am I doing something wrong or is anything incompatible with the other? Any input would be greatly appreciated. Thanks in advance for your help.
Sent from my SM-N900V using XDA Free mobile app
ElectroJoe said:
I'm extremely new at rooting and flashing roms, so please excuse my ignorance. I have a Verizon Note 3 SM-900V. I'm running Android 4.4.2 and my Baseband version is NC4. I've rooted it using"TowelRoot" and have installed Safestrap 3.72. I've booted into recovery partitioned slot 1 and wiped it. Then I installed HyperdriveRLS7.zip I hit reboot after it says it's finished installing the rom. Whenever I try to boot into the rom (slot 1), my screen goes black and my blue LED light stays on. I also tried flashing the rom named "hltevzw.Jellybeans.zip" and it does the same thing. Am I doing something wrong or is anything incompatible with the other? Any input would be greatly appreciated. Thanks in advance for your help.
Sent from my SM-N900V using XDA Free mobile app
Click to expand...
Click to collapse
First of all you need to know that you cannot use rom slots on NC4 only the stock slot. You can use the stock slot to flash custom roms.
Second you need to update you firmware to the so-called unified firmware which is simply what you currently have and the NC2 kernel which can be found here. Just follow the instructions and you'll be good to go.
Third you should upgrade to Safestrap 3.75 found here.
If you have soft bricked your phone (this will be the case if after pulling the battery you cannot boot into Safestrap, you'll need to flash the stock firmware via odin which can be found here, reroot, and then follow the above directions.
Now once you get all this taken care of you can flash a custom rom. Any rom based on NC2/NC4 will work, however any rom based on any earlier firmware will not work and may softbrick your phone, Jellybeans being one of them. Make sure you read the OP (Original Post) before flashing anything. Know what you are flashing, if you are unsure there are many many forum posts to read through that are full of info.
If you have any other questions just ask.
Many Thanks!
Glad to help.
I have purchased a Moto X. Do you have any knowledge on flashing roms on it? I hate to be a bother.
Sent from my SM-N900V using XDA Free mobile app
ElectroJoe said:
I have purchased a Moto X. Do you have any knowledge on flashing roms on it? I hate to be a bother.
Sent from my SM-N900V using XDA Free mobile app
Click to expand...
Click to collapse
Did you know the new Moto X was just announced and should be out in a couple months? Oh well, check out these forums. I don't know anything about the Moto X so I won't be able to help you sorry.

Categories

Resources