I was wondering that different lighting Patterns of Soft Key Lights (i.e.Touch sensible Navigation buttons) is possible or not ??
Eg. After unlocking the phone the Soft Key Lights blinks in a pattern for a some time...
rockmihir said:
I was wondering that different lighting Patterns of Soft Key Lights (i.e.Touch sensible Navigation buttons) is possible or not ??
Eg. After unlocking the phone the Soft Key Lights blinks in a pattern for a some time...
Click to expand...
Click to collapse
Not possible.
AssassinGEO said:
Not possible.
Click to expand...
Click to collapse
Would look awesome if possible !!!!
rockmihir said:
Would look awesome if possible !!!!
Click to expand...
Click to collapse
Yeah. Keep sending sms to urself every few seconds in silent mode. And u will get the blinking effect
Sent from my GT-I9300.
Give a thank if i helped you.
JellyYogurt said:
Yeah. Keep sending sms to urself every few seconds in silent mode. And u will get the blinking effect
Sent from my GT-I9300.
Give a thank if i helped you.
Click to expand...
Click to collapse
Does anyone know how to do it cause in Sony Xperia it is possible.....!!!
rockmihir said:
Does anyone know how to do it cause in Sony Xperia it is possible.....!!!
Click to expand...
Click to collapse
This is Not Q&A
Related
Is this supposed to do anything?
If you have the "power off after..." option set, then you can switch it back on again with that button. Other than that, I'm not sure it has a purpose.
Cheers,
Steve.
darkblak said:
Is this supposed to do anything?
Click to expand...
Click to collapse
Good question. Something i was to scared to ask. Because it does nothing for me.
darkblak said:
Is this supposed to do anything?
Click to expand...
Click to collapse
Good question. Something i was to scared to ask. Because it does nothing for me.
I've got my Exec setup to switch off the screen backlight after a short delay when on battery. Pressing the lightbulb button switches the backlight on again.
If you don't set your exec to switch off the backlight, then I can see why this button won't be massively useful for you.
Read the threads on how to assign apps to the lightbulb button, to make it useful.
V
To make it easier for all of you: http://forum.xda-developers.com/viewtopic.php?t=34377&highlight=backlight
cktlcmd said:
To make it easier for all of you: http://forum.xda-developers.com/viewtopic.php?t=34377&highlight=backlight
Click to expand...
Click to collapse
Thanks cktlcmd.
StevePritchard said:
If you have the "power off after..." option set, then you can switch it back on again with that button. Other than that, I'm not sure it has a purpose.
.
Click to expand...
Click to collapse
Got that set - but the button doesn't do anything for me. I'll try the reg hack version that's in this thread and see if it then works.
Hi guys,
with this tool you can switch between 'volume on' and 'vibrate' by shaking your phone
Just run it and click on 'Hide', so that it always run in background.
Please test it and tell me if the sensivity is ok and if it's not drain your battery to much.
Please donate for me! I'm a student and I spend all my free time for developing tools for you!
A cup of coffee for me
Received donations
6.00 EUR: Daniel O
4.00 EUR: Arne V
10.00 EUR: Mahmoud K
Thank you very much!
Changelog
Version 0.2 (07/11/08 14:10 pm)
Vibration feedback (1x long: vibration mode on, 2x short volume on)
A lot of settings for parameters. Just play around with them, because it's difficult to explain them.
At the moment settings will be lost, after closing my app.
application icon added
Version 0.1 (07/09/08 18:50 pm)
first release
Best regards,
Sascha
Sounds nice!
But how "hard" do you have to shuffle? I mean can it happen accidentially for example by running with the phone in your pocket?
horstborsch said:
Sounds nice!
But how "hard" do you have to shuffle? I mean can it happen accidentially for example by running with the phone in your pocket?
Click to expand...
Click to collapse
That's why it takes so long until i published this app.
I coded it so, that nothing can happend! Only if you shuffle the device, it change to vibrate or back to volume on.
I think it is not possible, that this happens, when you having your phone in your pocket ..... ok i don't know what you are doing the whole day...maybe it is possible
COOL!
Not to be ungrateful...but would it be possible to write something similar that will put an alarm into "Snooze" mode?
eg...Alarm goes off and instead of me having to navigate through the menu's to stop or snooze, I would just shake it?
i'd like to have a function by shuffling the diamond, that the screen goes on or off...
well done!
But is there any notification if you shake it that the status change is preformed?
So if you do it with the screen switched off you need a feedback if it was sucessfull. Maybe one beep for vibrate and two beeps for volume on?
daren1 said:
COOL!
Not to be ungrateful...but would it be possible to write something similar that will put an alarm into "Snooze" mode?
Click to expand...
Click to collapse
That sounds cool! I'll figure out that.
horstborsch said:
well done!
But is there any notification if you shake it that the status change is preformed?
So if you do it with the screen switched off you need a feedback if it was sucessfull. Maybe one beep for vibrate and two beeps for volume on?
Click to expand...
Click to collapse
It doesn't work, when the device is in standby!
If the device is on, you see it in title bar.
But i could also add a vibration feedback when switching.
Nice trick !
I will have a look at this...
Thanks !
@sushi : did you use the Gsensor API for that ?
its perfect!
@MonteCristoffOn:
I figured it out by myself, how to use the gsensor.
But at the end it was easier and faster to use the finished api, which was published a few days ago.
Works great so far!! But one question: Would it be possible to start the app completely in the background like a service? Thanks alot for your work!!
cheers
neoTheone said:
Works great so far!! But one question: Would it be possible to start the app completely in the background like a service? Thanks alot for your work!!
cheers
Click to expand...
Click to collapse
Yes, that's what i want to do in one of the next versions.
very sweet indeed!! I would also vote for a short vibration feedback after switching and customized actions to perform.. Thank you
After testing, i figured out, that my app works when the phone is in standby. First i said, that it won't...
In next release i give you the possibilty to change parameters, so that we can find the optimal settings.
neoTheone said:
very sweet indeed!! I would also vote for a short vibration feedback after switching and customized actions to perform.. Thank you
Click to expand...
Click to collapse
Works great on the TLR V2 Rom
Would also love to have a little vibrate when the profile is switched.
Thanks for the cool app
thank you again, i don't know if the "cup of coffee" link is there because of my suggestion (from the thflo3d thread) or it was already there but i think i did good use of it.
not enough for a mercedes or a new girl friend but sure enough for at least a "six pack"
thank you!
KukurikU said:
not enough for a new girl friend
Click to expand...
Click to collapse
What a shame! I need a new girl friend so much
But, thank you very much!
sushilange said:
In next release i give you the possibilty to change parameters, so that we can find the optimal settings.
Click to expand...
Click to collapse
Yes please provider a slider or something to be able to set the sensitivity by ourselves..... cuz sometimes when I shake it, it changes... other times it doesn't But the intention of this program: I love it!
Working Great!!
Awesome App!
i agree with other comments about the below....
As mentioned, a small vibrate or noise ( maybe make a noise when switch to loud, and vibrate it when switch to vibrate ??)
The shake to "wake up" the fone sounds awesome.
also shake to snooze or turn off the alarm.
Also things such as turning the phone over would work well with the alarm functions, and turning off the alarm
How about turn phone over to snooze alarm... shake it to stop alarm ???
Sweet, and now I can make the flashlight work too!
ForSquirel said:
Sweet, and now I can make the flashlight work too!
Click to expand...
Click to collapse
Like using the flash as a flashlight? Gravity box can do this, adds a tile to the quick settings screen in the notification shade.
This app works for flashing the flash led https://play.google.com/store/apps/details?id=com.manzy.flashnotification
Sent from my xt1060vzwDE
fury683 said:
Like using the flash as a flashlight? Gravity box can do this, adds a tile to the quick settings screen in the notification shade.
Click to expand...
Click to collapse
With gravity box you can also enable to torch from long press on lock ring or even from the volume down button, super convenient!
vikramkhalsa said:
With gravity box you can also enable to torch from long press on lock ring or even from the volume down button, super convenient!
Click to expand...
Click to collapse
Where is the setting for volume down torch? I saw the one for lock ring, but I use PIN and it doesn't work for active display lock ring.
fury683 said:
Where is the setting for volume down torch? I saw the one for lock ring, but I use PIN and it doesn't work for active display lock ring.
Click to expand...
Click to collapse
its under hardware key actions.
vikramkhalsa said:
its under hardware key actions.
Click to expand...
Click to collapse
Thanks dude, I was looking at the volume part before, but the "other" part.
It only seems to work from the actual lock screen though. I use PIN and it locks after 15 minutes. If the screen is just off, pressing the VOL down key doesn't do anything. If I turn the screen off and show the lock screen, it works.
I've found even if you slide the ring over to the unlock position and hold it down long enough, it still turns on the torch. Kinda inconvenient in my mind but hey, it's just a side effect of an awesome feature in the first place!
Is there a way to make Tasker have the LED blink? Like blink for charging, and solid for charged?
ragnarokx said:
Is there a way to make Tasker have the LED blink? Like blink for charging, and solid for charged?
Click to expand...
Click to collapse
Nope.
ragnarokx said:
Is there a way to make Tasker have the LED blink? Like blink for charging, and solid for charged?
Click to expand...
Click to collapse
There was an app someone made for that some time ago. It's under the themes and apps section.
Sent from my XT1058 using XDA Free mobile app
I'm currently thinking of a remapping app (remapping as in changing a physical button's output) , but I do not own a oneplus two. Can somebody tell me what the alert slider's keycodes are?
If any of you is willing to help but do not know how to find such info, I attached an apk (that I built from an open source code) to this post. Please install and open the app then change the alert slider state, screenshot the output then send them to me. Also, please state what ROM version you are running.
When the app is finally released to an xda thread, I'll list all the testers there of course.
P.S: The Alert Slider is that new hardware slider that changes sound profiles, in case you didn't already know
Here is the screenshot, hope it helps, makes sense to have the silent mode in the down position.
Swatto86 said:
Here is the screenshot, hope it helps, makes sense to have the silent mode in the down position.
Click to expand...
Click to collapse
Swapping the "none" profile and "all" profile was exactly what I was thinking.
Can you please tell me what the output of the other states of the slider was?
EDIT:What you actually sent me was the mapping of the back button
is it possible to map it so loud, vibrate and silent
merewood bebox said:
is it possible to map it so loud, vibrate and silent
Click to expand...
Click to collapse
That is what I am trying to achieve. If you own a One Plus Two, please download and install the apk and send me the screenshots after you toggle each alert slider state
The app does not do anything when toggling alert slider unfortunately.
Swatto86 said:
The app does not do anything when toggling alert slider unfortunately.
Click to expand...
Click to collapse
Wow, that is a very unexpected result ._. I'll have to look into the source code then.
Thanks a lot everyone
This would be genius !
I'm ready to be your beta-tester
OPT with OxygenOS 2.0.2 with Xposed here.
Would be great if we could reverse the mappings, so instead of all notifications with the slider being all the way down it would be all the way up for all notifications.
Slider up: All notifications
Slider middle: Priority
Slider down: Silent
Strange idea, but what if for each slide matched a battery profile, like battery saver, balanced, performance?
morback said:
This would be genius !
I'm ready to be your beta-tester
OPT with OxygenOS 2.0.2 with Xposed here.
Click to expand...
Click to collapse
yakuzlin said:
Would be great if we could reverse the mappings, so instead of all notifications with the slider being all the way down it would be all the way up for all notifications.
Slider up: All notifications
Slider middle: Priority
Slider down: Silent
Click to expand...
Click to collapse
Kito92 said:
Strange idea, but what if for each slide matched a battery profile, like battery saver, balanced, performance?
Click to expand...
Click to collapse
I thought about having multiple layout options : battery modes;CPU governors; rotation change etc..
However I still haven't found the alert slider mapping file :/ This is becoming quite frustrating
Will have my OPT soon and will do anything I can to help out with this. Think the All/Priority/None options are not useful at all.
its taking a lot of time ...attached img is for priority ..ie key in d middle..
RulerAk said:
its taking a lot of time ...attached img is for priority ..ie key in d middle..
Click to expand...
Click to collapse
Wow, thanks! How about the two other states? none and all ?
For all its f8(not 100% sure) .... It's takin a looot of time n not recording for d other one..... May b cause m not rooted yet
Sent from my ONE A2003 using XDA Free mobile app
I really hope this works. Good luck on this
The one plus two slider doesnt work with keycode's
toonvanstrijp said:
The one plus two slider doesnt work with keycode's
Click to expand...
Click to collapse
Would you happen to know how it behaves?
thetechnologician said:
Would you happen to know how it behaves?
Click to expand...
Click to collapse
Any updates on this ? Very interested
merewood bebox said:
is it possible to map it so loud, vibrate and silent
Click to expand...
Click to collapse
I made an app for it. Try play.google.com/store/apps/details?id=com.nqk.vibratemode (sorry, I need to post 10 posts in order to embed the link
You just need to follow the instruction and enjoy the vibration.
Hi there,
is it possible to change the LED behavior for the "Flip to Glyph" mode?
I really want to see the LED lights flashing like on my "normal ringtone" when in Flip to Glyph mode, but only one LED flashes.
And it would really nice to have a option at the indicator/status menu to change it to on or off.
Thanks in advance,
konqi
It is possible but not recommended if you're not skilled enough.
konquistidator said:
Hi there,
is it possible to change the LED behavior for the "Flip to Glyph" mode?
I really want to see the LED lights flashing like on my "normal ringtone" when in Flip to Glyph mode, but only one LED flashes.
And it would really nice to have a option at the indicator/status menu to change it to on or off.
Thanks in advance,
konqi
Click to expand...
Click to collapse
You're talking about changing the light behavior but sometimes for me when I flip the phone the lights are not blinking!
Pheggas said:
It is possible but not recommended if you're not skilled enough.
Click to expand...
Click to collapse
How to do that?
It has been mentioned. It is not recommended, nor using it.
Pheggas said:
It has been mentioned. It is not recommended, nor using it.
Click to expand...
Click to collapse
I didnt find any threads about it. Can you link it please?