Hi guys,
with this tool you can switch between 'volume on' and 'vibrate' by shaking your phone
Just run it and click on 'Hide', so that it always run in background.
Please test it and tell me if the sensivity is ok and if it's not drain your battery to much.
Please donate for me! I'm a student and I spend all my free time for developing tools for you!
A cup of coffee for me
Received donations
6.00 EUR: Daniel O
4.00 EUR: Arne V
10.00 EUR: Mahmoud K
Thank you very much!
Changelog
Version 0.2 (07/11/08 14:10 pm)
Vibration feedback (1x long: vibration mode on, 2x short volume on)
A lot of settings for parameters. Just play around with them, because it's difficult to explain them.
At the moment settings will be lost, after closing my app.
application icon added
Version 0.1 (07/09/08 18:50 pm)
first release
Best regards,
Sascha
Sounds nice!
But how "hard" do you have to shuffle? I mean can it happen accidentially for example by running with the phone in your pocket?
horstborsch said:
Sounds nice!
But how "hard" do you have to shuffle? I mean can it happen accidentially for example by running with the phone in your pocket?
Click to expand...
Click to collapse
That's why it takes so long until i published this app.
I coded it so, that nothing can happend! Only if you shuffle the device, it change to vibrate or back to volume on.
I think it is not possible, that this happens, when you having your phone in your pocket ..... ok i don't know what you are doing the whole day...maybe it is possible
COOL!
Not to be ungrateful...but would it be possible to write something similar that will put an alarm into "Snooze" mode?
eg...Alarm goes off and instead of me having to navigate through the menu's to stop or snooze, I would just shake it?
i'd like to have a function by shuffling the diamond, that the screen goes on or off...
well done!
But is there any notification if you shake it that the status change is preformed?
So if you do it with the screen switched off you need a feedback if it was sucessfull. Maybe one beep for vibrate and two beeps for volume on?
daren1 said:
COOL!
Not to be ungrateful...but would it be possible to write something similar that will put an alarm into "Snooze" mode?
Click to expand...
Click to collapse
That sounds cool! I'll figure out that.
horstborsch said:
well done!
But is there any notification if you shake it that the status change is preformed?
So if you do it with the screen switched off you need a feedback if it was sucessfull. Maybe one beep for vibrate and two beeps for volume on?
Click to expand...
Click to collapse
It doesn't work, when the device is in standby!
If the device is on, you see it in title bar.
But i could also add a vibration feedback when switching.
Nice trick !
I will have a look at this...
Thanks !
@sushi : did you use the Gsensor API for that ?
its perfect!
@MonteCristoffOn:
I figured it out by myself, how to use the gsensor.
But at the end it was easier and faster to use the finished api, which was published a few days ago.
Works great so far!! But one question: Would it be possible to start the app completely in the background like a service? Thanks alot for your work!!
cheers
neoTheone said:
Works great so far!! But one question: Would it be possible to start the app completely in the background like a service? Thanks alot for your work!!
cheers
Click to expand...
Click to collapse
Yes, that's what i want to do in one of the next versions.
very sweet indeed!! I would also vote for a short vibration feedback after switching and customized actions to perform.. Thank you
After testing, i figured out, that my app works when the phone is in standby. First i said, that it won't...
In next release i give you the possibilty to change parameters, so that we can find the optimal settings.
neoTheone said:
very sweet indeed!! I would also vote for a short vibration feedback after switching and customized actions to perform.. Thank you
Click to expand...
Click to collapse
Works great on the TLR V2 Rom
Would also love to have a little vibrate when the profile is switched.
Thanks for the cool app
thank you again, i don't know if the "cup of coffee" link is there because of my suggestion (from the thflo3d thread) or it was already there but i think i did good use of it.
not enough for a mercedes or a new girl friend but sure enough for at least a "six pack"
thank you!
KukurikU said:
not enough for a new girl friend
Click to expand...
Click to collapse
What a shame! I need a new girl friend so much
But, thank you very much!
sushilange said:
In next release i give you the possibilty to change parameters, so that we can find the optimal settings.
Click to expand...
Click to collapse
Yes please provider a slider or something to be able to set the sensitivity by ourselves..... cuz sometimes when I shake it, it changes... other times it doesn't But the intention of this program: I love it!
Working Great!!
Awesome App!
i agree with other comments about the below....
As mentioned, a small vibrate or noise ( maybe make a noise when switch to loud, and vibrate it when switch to vibrate ??)
The shake to "wake up" the fone sounds awesome.
also shake to snooze or turn off the alarm.
Also things such as turning the phone over would work well with the alarm functions, and turning off the alarm
How about turn phone over to snooze alarm... shake it to stop alarm ???
Related
Just upgraded to the M3100 from C600 and am liking it, however as with all smartphones I have had the built in alarm is pretty useless and I end up switching it off with out realising (I am a heavy sleeper).
I got an application for the C600 called Gentimer which has a nice feature called "Sleepyhead" that requires you to enter a 6 digit random code to actually turn the alarm off, you can snooze without the code but it is required to turn the alarm off.
This isn't fully compatible with the M3100, therefore I was wondering if there are any other alarms with similar functionality that will be of great use to me...
Help please, Monday morning coming up and won't wanna get up...
Thanks
Mark
Try PocketAlarm. It has a lot of features to wake up anybody.
Does this PocketAlarm have the ability to have to enter a code to switch off the alarm.
Any other recommendations for good alarms?
Thanks
Mark
mdavenport said:
Does this PocketAlarm have the ability to have to enter a code to switch off the alarm.
Any other recommendations for good alarms?
Thanks
Mark
Click to expand...
Click to collapse
I really wouldnt rely on the alarm clock on the tytn. mine is very sporadic. the problem is there is a bug in the M$ code that makes the "waking up the phone" part, not work.
I heard of a product called "CityTime Alarms". anyone had an experience of this?
Thanks
Mark
mdavenport said:
I heard of a product called "CityTime Alarms". anyone had an experience of this?
Thanks
Mark
Click to expand...
Click to collapse
yes, that works just as well as all the other alarms and non of them do very well at waking the phone up from standby.
frustin said:
... and non of them do very well at waking the phone up from standby.
Click to expand...
Click to collapse
What do you mean? Is not 100% fiable any software alarm other than integrated in WM5?
mdavenport, I like Chronos. In addition to the usual alarms, it has a chime every hour (or fraction) that sounds like... my old Casio watch!!
Thanks for the info...
One ongoing problem I find with the alarms on phones is mainly down to me but can be helped by the software. Basically I always seem to hit the dimiss button and turn the alarm off and then over sleep..
Does Chronos have a big snooze button and small dismiss to help avoid this..
Thanks
Mark
Pocket Wake up has a slightly larger snooze button
Im still struggling to find one I get on with. I am using SPB Time but it seems a little bit overkill for what I want.
Basically, I want one that allows multiple alarms, mp3 tones and a more difficult way to dismiss the alarm so I don't accidentally dismiss all my alarms...
Anymore suggestions...
Mark
Hi to all diamond uses.
Just to let you know that a new (another one) lock app is on the air.
Thread started in the Blackstone software area.
Check it out!
LockMeLite HD-Diamond-Raphael
Keep watching the main thread in HD section.
Version 1.2 is released!
-Add user define background
-Keep unlock (LmL) while talking.
Thanks.
I hope you enjoy it. Its free after all
PS. After getting a message for a kind donation i include the button on the bottom.
PS1. Any donation, small or large, helps this project continues. Thanks again !
geoks100 said:
Hi to all diamond uses.
Just to let you know that a new (another one) lock app is on the air.
Thread started in the Blackstone software area.
Check it out!
LockMeLite HD-Diamond
Thanks.
Click to expand...
Click to collapse
Thanks for the wonderfull App, it works like a diamond
Finaly!!!! i found my lock app!!!
Thank your very very much!
I've found my lock app too.
great job on this.
is there any way to change the time format to 12hr?
kbw said:
I've found my lock app too.
great job on this.
is there any way to change the time format to 12hr?
Click to expand...
Click to collapse
Maybe later if people really like it and the project continues it could be
a user setting environment
Work great, just one thing : could be great if the app auto unlock when the phone receive a call (coz the diamond have a nice "slide to answer") and re-lock after the call...
Yodajr said:
Work great, just one thing : could be great if the app auto unlock when the phone receive a call (coz the diamond have a nice "slide to answer") and re-lock after the call...
Click to expand...
Click to collapse
...but the main idea is to prevent users from pressing accidentally the answer/ignore button when an incoming call arrived!
Anyway various ideas comes in mind for new versions
Yes, I know, but it is also very usefull for *just* lock the phone : I play a game, I read my mail, or anything, then I just turn off the phone and *hop* it's locked.
I don't worry if a reminder occur, if the on/off button is push accidentaly, or anything else, because I know that the phone is lock until I do a 45% vertical slide
And cherry on the cake, when I ask myself "what time is it ?", I just have to push a button (otherwise, I need to back to home screen with TF3D)
So if you plan to add a user config system to your app, please put a little "manage incomming call ?" box
getting better and better. after a few days i got unsatisfied with all the oter lock apps. but this is killer.
ps. is there a way to auto unlock for incoming calls? in most of the roms there is the phone canvas slider. that would do the job in that case, too.
BuzzingFreak said:
is there a way to auto unlock for incoming calls?
Click to expand...
Click to collapse
Yeah, at leat 2 pp want it
doesn´t work on my touch pro. i execute the lockmelite.exe but nothing happens.
what did i wrong
Yodajr said:
Yeah, at leat 2 pp want it
Click to expand...
Click to collapse
Make that 3 allready!
Some user-preferences would be very nice! Just installed, but love the app allready!
djkasmic said:
doesn´t work on my touch pro. i execute the lockmelite.exe but nothing happens.
what did i wrong
Click to expand...
Click to collapse
Can't see a reason why...
Have you install the .NET Compact Framework 3.5 ?
Try a soft reset and execute it again!
i reinstalled netcf and now it works great. thanks.
installed it, runs very nice but unfortunately it makes the reminder and the alarm unusuable when an alarm comes up, the lock screen appears like it should. when you unlock, the message of the alarm or reminder is gone and you have to tap on the top-line icon to get it back also the funktion to let the alarms sound even in vibrate or silence mode won't work no mor... the device only vibrates.....
malsehn said:
installed it, runs very nice but unfortunately it makes the reminder and the alarm unusuable when an alarm comes up, the lock screen appears like it should. when you unlock, the message of the alarm or reminder is gone and you have to tap on the top-line icon to get it back also the funktion to let the alarms sound even in vibrate or silence mode won't work no mor... the device only vibrates.....
Click to expand...
Click to collapse
The last part has nothing to do with the LmL. Maybe some other setting to try ?!?
This is simply fantastic.
I too would like to be able to answer the phone without unlocking it. I would be quite happy with just using the hardware keys on the Diamond which seem to be locked for an incoming call.
Personally, I dont need or want other options - its simplicity is perfect. Something small and light.
perhaps its possible to implement the ability to assign some exceptions for lockmelite, i.e. that it should not lock normal homescreen (when you turn on the device consciously you don't need to have it locked i guess) or even for an upcoming alarm... THEN it really would be a perfect app!
New Release
version 1.2 released!
Enjoy
Hey man, great job!!! I love it
Now we just need an autostart function, hehe
Hello!
GSuspend simple tool which put device to suspend (standby) mode when HTC Diamand is facedown.
To unload start it again.
To install , just extract folder to Program Files, and copy .lnk to Windows\Start Menu\Programs.
After new ROM has issued, GSEN stop worked stabily, and i started to search my favourity ability of gsen - facedown suspend. But i can't find replacement of GSEN in this ability.
Finally fight win my desire against my laziness and done this application.
In the base of this app was SensorLock thanks surfsmurf.
I hope somebody also find it usefull.
Thanks
P.S. Improved power management.
Still looking sample to catch event of incoming call, if somebody can share C++
Tnx, I'll try it right now!
[EDIT] Works perfect! Very small and light application btw.
One thing I noticed; my phone is not locked with PocketShield after turning back on.
Thanks
roma_pop said:
Hello!
GSuspend simple tool which put device to suspend (standby) mode when HTC Diamand is facedown.
After new ROM has issued, GSEN stop worked stabily, and i started to search my favourity ability of gsen - facedown suspend. But i can't find replacement of GSEN in this ability.
Finally fight win my desire against my laziness and done this application.
In the base of this app was SensorLock thanks surfsmurf.
I hope somebody also find it usefull.
Thanks
Click to expand...
Click to collapse
Thank you for what must've cost you time & valued effort.
Is it possible for you to modify this in a way that it would automatically Silence the device when facedown, and back to normal volume settings on all other positions? I find it VERY useful to have that -instead of having to turn it face up & down everytime a call comes in". Everybody else apparently misses the point that a phone vibrating on wooden desks is just as terribley impolite as having it spitting jams left & right.
Do consider it...
changeScreen has a feature built into it that can suspend the phone when it's flipped face down
ruskiyab said:
changeScreen has a feature built into it that can suspend the phone when it's flipped face down
Click to expand...
Click to collapse
I didn't need any others functionality, so i've made for my desires.
roma_pop said:
I didn't need any others functionality, so i've made for my desires.
Click to expand...
Click to collapse
thats exactly what I want
but I think "upside down" or "Portrait 180" is more reliable for this job
and a small vibrate in the hand to confirm the suspend is good too
1KB MEM . . . thats awesome
thanks,
Sorry , i noticed battery drain, will work on that , sorry
is this app only turn off scren on face down or it is suspend device, because changescreen only tunr off screen??
"upside down" or "Portrait 180" excellent idea
but i dont need vibrate(i hate it)
I'm a little confused now . I'm reading about an app that turns the device on silent when faced down. This is what I'm looking for, so I can easily mute during a meeting. Vibrate on 'siwtch' is also perfectly. But my confusion is: which app do I need (or doe'sn't it exist for now )
watikjebrom said:
I'm a little confused now . I'm reading about an app that turns the device on silent when faced down. This is what I'm looking for, so I can easily mute during a meeting. Vibrate on 'siwtch' is also perfectly. But my confusion is: which app do I need (or doe'sn't it exist for now )
Click to expand...
Click to collapse
If you receive a call during a meeting, the function to turn your phone face-down to mute the call is already build in. (maybe you have to activate it using Advanced Configuration)
GSuspend it a tool to put your device in standby on face-down.
johanromijn said:
If you receive a call during a meeting, the function to turn your phone face-down to mute the call is already build in. (maybe you have to activate it using Advanced Configuration)
GSuspend it a tool to put your device in standby on face-down.
Click to expand...
Click to collapse
TouchLockPro can do the same (configurable), is also small and is at the same time a lock/unlock program. Beside the GSensor, it also can couple commands to capacitive swipes, e.g. to suspend the device.
johanromijn said:
If you receive a call during a meeting, the function to turn your phone face-down to mute the call is already build in. (maybe you have to activate it using Advanced Configuration)
GSuspend it a tool to put your device in standby on face-down.
Click to expand...
Click to collapse
The 'turn-to-mute' function is working oké, but what I'm looking for is an app that turns my device on 'silent' when my device ís faceddown and 'normal' faced-up. So when I'm in a meeting I don't have to switch profile or flip my phone
watikjebrom said:
The 'turn-to-mute' function is working oké, but what I'm looking for is an app that turns my device on 'silent' when my device ís faceddown and 'normal' faced-up. So when I'm in a meeting I don't have to switch profile or flip my phone
Click to expand...
Click to collapse
Right on, +1 here. In meetings, if you're unprepared, you'd have to flip over & over & over, etc..., everytime you get a call. It gets irritating until you actually start pushing buttons and adjusting it manually...
If you have that meeting scheduled in your calendar, you could try G-Profile for example.
Based on your calendar, G-Profile can adjust your notification settings.
shirreer said:
Right on, +1 here. In meetings, if you're unprepared, you'd have to flip over & over & over, etc..., everytime you get a call. It gets irritating until you actually start pushing buttons and adjusting it manually...
Click to expand...
Click to collapse
Probably i can release app that kind, but still looking for solution to reduce power consumption. Otherwise this all are useless.
Any ideas, how to correctly snooze program appreciated and really helps me.
Sry i'm not a proffesional designer, don't ask from me too much pls.
Thanks
shirreer said:
Right on, +1 here. In meetings, if you're unprepared, you'd have to flip over & over & over, etc..., everytime you get a call. It gets irritating until you actually start pushing buttons and adjusting it manually...
Click to expand...
Click to collapse
That's exactly what I mean. I don't use the build-in calender so G-Profile won't work for me
watikjebrom said:
I'm a little confused now . I'm reading about an app that turns the device on silent when faced down. This is what I'm looking for, so I can easily mute during a meeting. Vibrate on 'siwtch' is also perfectly. But my confusion is: which app do I need (or doe'sn't it exist for now )
Click to expand...
Click to collapse
hi,
Have you try with this soft : MobilMagic
very powerfull and customized tool, it can do what you want.... but don't know if it drain battery a lot or not.
GSuspend is very cool, simple and do exactly what i want but, when i switch on the screen, it switch off again (only 1 time but....) i don't know why, need to switch on 2 times.
V.
I can't find a way to turn this off - can anybody help please? It's loud and horrible
AndyGarton said:
I can't find a way to turn this off - can anybody help please? It's loud and horrible
Click to expand...
Click to collapse
Even though I dont own an HD2 (yet).. try going in settings tab then down the bottom choose "menu/all settings", then choose personal, then phone and sellect keypad "off".. take care
Thank you, that worked (can't believe I missed it).
no worries... Its easy to get lost some times in wm, even more so when this is masked by htc sense ui
Great, thanks for the tip! I thought I had been through all sub-menus but I somehow missed the "Personal" one
AndyGarton said:
Thank you, that worked (can't believe I missed it).
Click to expand...
Click to collapse
don't worry, you're not alone.. i totally missed it too...
as i read the first reply i was like 'wtf?'
then it became obvious... lol.
thanks for starting this thread, cause i woulda never found out.
saintnickxiii said:
don't worry, you're not alone.. i totally missed it too...
as i read the first reply i was like 'wtf?'
then it became obvious... lol.
thanks for starting this thread, cause i woulda never found out.
Click to expand...
Click to collapse
im with u
u solved my problem too
thank u .
We almost need a thread called ,
"Everything you want to know about HD2 but were afraid to ask" ..
I know there are some things that I just missed that were staring me right in the face ...
Anyone know how to disable this through the registry? I'm trying to sort this out when XDA_UC runs.
I flash A LOT and it's a pain to do this every single time.
EDIT: Got it
http://forum.xda-developers.com/showpost.php?p=6945714&postcount=367
HKCU \ ControlPanel \ Sounds \ Keypress
Beep Mode: 0
Sigh... Missed it BIG TIME. It was right there...Below the "play" and "stop" button........ Thank you for starting this thread
WTF-moment...
this is one of the most baffling things about WM. i always forget where this is located ever since my touch diamond days.
cheers m8 helped me as well, the keypad tone was really annoying and I had no clue in how to turn it off.
ok... im not the only one
hahahah i just what i was looking for!! thanks for the solution
Thanks!
Thanks for the help!
How do i turn off typing sound of messaging?
Hey i cant find any way to turn off keyboard sound during messaging...
When i set system volume from volume button to minimum then it also minimizes my sms alert volume...
I have turned off keypad tones from settings>personal>phone but it doesn't turn off keyboard sound during messaging...
please help me out!!!
arslankhan20 said:
Hey i cant find any way to turn off keyboard sound during messaging...
When i set system volume from volume button to minimum then it also minimizes my sms alert volume...
I have turned off keypad tones from settings>personal>phone but it doesn't turn off keyboard sound during messaging...
please help me out!!!
Click to expand...
Click to collapse
Hi,
go to settings/more settings/sounds & notifications.
Regards
Getrid
I'm currently thinking of a remapping app (remapping as in changing a physical button's output) , but I do not own a oneplus two. Can somebody tell me what the alert slider's keycodes are?
If any of you is willing to help but do not know how to find such info, I attached an apk (that I built from an open source code) to this post. Please install and open the app then change the alert slider state, screenshot the output then send them to me. Also, please state what ROM version you are running.
When the app is finally released to an xda thread, I'll list all the testers there of course.
P.S: The Alert Slider is that new hardware slider that changes sound profiles, in case you didn't already know
Here is the screenshot, hope it helps, makes sense to have the silent mode in the down position.
Swatto86 said:
Here is the screenshot, hope it helps, makes sense to have the silent mode in the down position.
Click to expand...
Click to collapse
Swapping the "none" profile and "all" profile was exactly what I was thinking.
Can you please tell me what the output of the other states of the slider was?
EDIT:What you actually sent me was the mapping of the back button
is it possible to map it so loud, vibrate and silent
merewood bebox said:
is it possible to map it so loud, vibrate and silent
Click to expand...
Click to collapse
That is what I am trying to achieve. If you own a One Plus Two, please download and install the apk and send me the screenshots after you toggle each alert slider state
The app does not do anything when toggling alert slider unfortunately.
Swatto86 said:
The app does not do anything when toggling alert slider unfortunately.
Click to expand...
Click to collapse
Wow, that is a very unexpected result ._. I'll have to look into the source code then.
Thanks a lot everyone
This would be genius !
I'm ready to be your beta-tester
OPT with OxygenOS 2.0.2 with Xposed here.
Would be great if we could reverse the mappings, so instead of all notifications with the slider being all the way down it would be all the way up for all notifications.
Slider up: All notifications
Slider middle: Priority
Slider down: Silent
Strange idea, but what if for each slide matched a battery profile, like battery saver, balanced, performance?
morback said:
This would be genius !
I'm ready to be your beta-tester
OPT with OxygenOS 2.0.2 with Xposed here.
Click to expand...
Click to collapse
yakuzlin said:
Would be great if we could reverse the mappings, so instead of all notifications with the slider being all the way down it would be all the way up for all notifications.
Slider up: All notifications
Slider middle: Priority
Slider down: Silent
Click to expand...
Click to collapse
Kito92 said:
Strange idea, but what if for each slide matched a battery profile, like battery saver, balanced, performance?
Click to expand...
Click to collapse
I thought about having multiple layout options : battery modes;CPU governors; rotation change etc..
However I still haven't found the alert slider mapping file :/ This is becoming quite frustrating
Will have my OPT soon and will do anything I can to help out with this. Think the All/Priority/None options are not useful at all.
its taking a lot of time ...attached img is for priority ..ie key in d middle..
RulerAk said:
its taking a lot of time ...attached img is for priority ..ie key in d middle..
Click to expand...
Click to collapse
Wow, thanks! How about the two other states? none and all ?
For all its f8(not 100% sure) .... It's takin a looot of time n not recording for d other one..... May b cause m not rooted yet
Sent from my ONE A2003 using XDA Free mobile app
I really hope this works. Good luck on this
The one plus two slider doesnt work with keycode's
toonvanstrijp said:
The one plus two slider doesnt work with keycode's
Click to expand...
Click to collapse
Would you happen to know how it behaves?
thetechnologician said:
Would you happen to know how it behaves?
Click to expand...
Click to collapse
Any updates on this ? Very interested
merewood bebox said:
is it possible to map it so loud, vibrate and silent
Click to expand...
Click to collapse
I made an app for it. Try play.google.com/store/apps/details?id=com.nqk.vibratemode (sorry, I need to post 10 posts in order to embed the link
You just need to follow the instruction and enjoy the vibration.