Database Users

HELP!!!!!!!!!!!!!!!

So i used goo manager to install twrp on my att s4. I was running the new firmware. MF3. I rebooted my phone to find my self set right to download mode and it says, Could not do normal boot! Please help me, i would like the re flash that firmware but cant find it.

nicholascap said:
So i used goo manager to install twrp on my att s4. I was running the new firmware. MF3. I rebooted my phone to find my self set right to download mode and it says, Could not do normal boot! Please help me, i would like the re flash that firmware but cant find it.
Click to expand...
Click to collapse
so you were rooted and running MF3, you simply installed twrp via goo manager and the device only boots to the error/warning screen, right? normally, flashing the stock firmware via odin clears up this issue but in this case, you cannot flash back to MDL or MDB from MF3, nor is there an MF3 firmware tar that i've seen anywhere. hmmm...

Link me to a stock MF3 recovery.img and I can make it a .tar for you...

;44285866 said:
Link me to a stock MF3 recovery.img and I can make it a .tar for you...
Click to expand...
Click to collapse
Yea, good luck with that! Linking to the image I mean.

jd1639 said:
Yea, good luck with that! Linking to the image I mean.
Click to expand...
Click to collapse
Someone pulled it about a week back trying to make an MF3 ROM that doesn't lock things down... I'm not looking for it, my phone has and always will work...

Try this open back panel take out batt. get you s/number put everything back together and run kies emergency recovety. All you need is module number and s/number and it will reinstall back to stock had a similar issue my first hr with my SGS4
Sent from my SGH-I337 using xda premium

VICIOUSVIC1 said:
Try this open back panel take out batt. get you s/number put everything back together and run kies emergency recovety. All you need is module number and s/number and it will reinstall back to stock had a similar issue my first hr with my SGS4
Sent from my SGH-I337 using xda premium
Click to expand...
Click to collapse
That will also work, but wasn't he rooted on MF3? I've stopped following XDA for the most part since i have to lay low... MF3 has been rooted after a full update to it?

;44286151 said:
That will also work, but wasn't he rooted on MF3? I've stopped following XDA for the most part since i have to lay low... MF3 has been rooted after a full update to it?
Click to expand...
Click to collapse
Mf3 has been rooted, but no way to put on a custom recovery or return to stock via odin. There's no firmware available.

<=LongJohnSilver=> said:
That will also work, but wasn't he rooted on MF3? I've stopped following XDA for the most part since i have to lay low... MF3 has been rooted after a full update to it?
Click to expand...
Click to collapse
Rooted, yes, but no exploit or recovery.

jd1639 said:
Mf3 has been rooted, but no way to put on a custom recovery or return to stock via odin. There's no firmware available.
Click to expand...
Click to collapse
xBeerdroiDx said:
Rooted, yes, but no exploit or recovery.
Click to expand...
Click to collapse
Kies it is then...
@OP
Uninstall the Samsung USB Drivers
Run CCleaner
Reboot
Install Kies and do an Emergency firmware recovery with the phone in download mode

Ljs is hopefully here to stay.

jd1639 said:
Ljs is hopefully here to stay.
Click to expand...
Click to collapse
Never know...

No luck
xBeerdroiDx said:
so you were rooted and running MF3, you simply installed twrp via goo manager and the device only boots to the error/warning screen, right? normally, flashing the stock firmware via odin clears up this issue but in this case, you cannot flash back to MDL or MDB from MF3, nor is there an MF3 firmware tar that i've seen anywhere. hmmm...
Click to expand...
Click to collapse
Ya I have looked every where for the MF3 firmware no one has it. I'll try the kies idea

nicholascap said:
Ya I have looked every where for the MF3 firmware no one has it. I'll try the kids idea
Click to expand...
Click to collapse
Look in here:
http://forum.xda-developers.com/showthread.php?t=2378946
That recovery.img can be made into a .tar
EDIT - I dont see recovery.img, use KIES

Recovery img
Where on that page is the recovery.img? Is the it rom file?

;44287529 said:
Look in here:
http://forum.xda-developers.com/showthread.php?t=2378946
That recovery.img can be made into a .tar
EDIT - I dont see recovery.img, use KIES
Click to expand...
Click to collapse
But will the efuses allow it to be flashed?

nicholascap said:
Where on that page is the recovery.img? Is the it rom file?
Click to expand...
Click to collapse
I was mistaken, it's not there... Those are just dumps of his partitions... You are having a reccovery issue, since the stock 3e recovery is gone...
Just use KIES, follow my steps a few posts back to prevent a connectivity issue.

can you see if you can find that for me. thx

You have been banned for the following reason:
Hi Quasi, I hear Rootzwiki.com is very welcoming to new members.
Date the ban will be lifted: Never
You're going to have to better than that... I can and will create as many accounts as I please, spam if I want, and do everything I can to make your job harder.
Since yall have done me wrong in the past numerous times, it's my duty now to do yall wrong.
I told you you banned the wrong one...

KIES
KIES will only pull up a old firmware not the new one so it wont flash. IDK what to do now,

[Q]Can you downgrade from MJA to MF9 through ODIN?

The Knox Bootloader is.... Annoying
Anyone know if I could flash the MF9 tar in ODIN and revert back to the 4.2 Bootloader

do not you will even cause bigger problems stay cool untill a tar is released they are working hard to see what they can due the only choice you have no is to go to a ROM that is 4.3 but that I know of it is still un heard of KNOX is a whole new monster that I have a feeling is gonna tick a lot of people off love love love Samsung phones but they need to realize this could hurt them....

NO.
Sent from my SPH-L720 using Tapatalk

jprocket45 said:
do not you will even cause bigger problems stay cool untill a tar is released they are working hard to see what they can due the only choice you have no is to go to a ROM that is 4.3 but that I know of it is still un heard of KNOX is a whole new monster that I have a feeling is gonna tick a lot of people off love love love Samsung phones but they need to realize this could hurt them....
Click to expand...
Click to collapse
Thanks for the reply. If I had known that KNOX was gonna be such a problem I would of held off from upgrading...
Guess I gotta be patient until our beautiful dev community comes up with some way to deal with KNOX

Robin Dhicke said:
Thanks for the reply. If I had known that KNOX was gonna be such a problem I would of held off from upgrading...
Guess I gotta be patient until our beautiful dev community comes up with some way to deal with KNOX
Click to expand...
Click to collapse
so there is no way to go back to MDC then huh? -/-

kalanir said:
so there is no way to go back to MDC then huh? -/-
Click to expand...
Click to collapse
Well not yet.
Sent from my SPH-L720 using xda app-developers app

nope stuck just like the rest of us lol its not fun

Don't worry......it's only a matter of time. If u need a stable rom, I highly recommend sac23's custom 4.3 rom. V3 will be out soon. This rom has made it easier to cope with 4.3, well easier for us who are stuck with the Knox......check out his thread. You'll love it.
Sent from my SPH-L720 using XDA Premium 4 mobile app

I'm not sure what any of you are talking about. I updated to 4.3 a couple of days ago, then wiped and flashed a MDC tar with ODIN and brought it back to MF9 with OTA updates. Everything is fine.
---------- Post added at 12:15 AM ---------- Previous post was at 12:14 AM ----------
Robin Dhicke said:
The Knox Bootloader is.... Annoying
Anyone know if I could flash the MF9 tar in ODIN and revert back to the 4.2 Bootloader
Click to expand...
Click to collapse
Yes... You can do this. I did it. See my last post above.

Sleepycloud said:
I'm not sure what any of you are talking about. I updated to 4.3 a couple of days ago, then wiped and flashed a MDC tar with ODIN and brought it back to MF9 with OTA updates. Everything is fine.
---------- Post added at 12:15 AM ---------- Previous post was at 12:14 AM ----------
Yes... You can do this. I did it. See my last post above.
Click to expand...
Click to collapse
Hello,
How did you manage to do it?
I tried to do that with Odin 1.85 and 3.07 and nothing. It aborts right away.

edgardch said:
Hello,
How did you manage to do it?
I tried to do that with Odin 1.85 and 3.07 and nothing. It aborts right away.
Click to expand...
Click to collapse
I wiped everything in TWRP, and rebooted into download mode. Then flashed the tar with 3.07 and a PIT file. Uncheck reboot. Check Repartitition, Nand erase, and F. Reset Time. When it reboots it wiil update in recovery with the little andy dude, and then reboot to load up. I pull the battery and factory reset. It works fine. I updated to 4.3 friday morning. and decided to go back to MF9 so that I could use The HotSpot Mod and Reboot Menu. F**k 4.3...it was disapointing.
EDIT-----> READ ALL OF THE FOLLOW-UP POSTS BEFORE YOU TRY THIS.... MY PHONE HAD A UNIQUE SITUATION AND THIS WILL NOT WORK FOR MOST EVERYONE ELSE.

Sleepycloud said:
I wiped everything in TWRP, and rebooted into download mode. Then flashed the tar with 3.07 and a PIT file. Uncheck reboot. Check Repartitition, Nand erase, and F. Reset Time. When it reboots it wiil update in recovery with the little andy dude, and then reboot to load up. I pull the battery and factory reset. It works fine. I updated to 4.3 friday morning. and decided to go back to MF9 so that I could use The HotSpot Mod and Reboot Menu. F**k 4.3...it was disapointing.
Click to expand...
Click to collapse
I want proof lol. go to mja again and go back to mf9 lol
Sent from my SPH-L720 using Tapatalk

daniel4653 said:
I want proof lol. go to mja again and go back to mf9 lol
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
There is one problem. Now it won't update to MJA. Something is different, but I'm not sure what. I don't care if you don't believe me. I did it, and that is how I did it. There was one other issue. It kept redownloading the Sprint Default Configuration over and over and over. Like more than 50 times back to back.I finally deleted the apk to get that to stop. Outside of that, my phone works fine. I believe their are remnants of 4.3 and that is why it says the system is up to date on MF9 and does not prompt me for the 4.3 update. I really don't know, but m phone appears to be working perfectly.

Sleepycloud said:
There is one problem. Now it won't update to MJA. Something is different, but I'm not sure what. I don't care if you don't believe me. I did it, and that is how I did it. There was one other issue. It kept redownloading the Sprint Default Configuration over and over and over. I finally deleted the apk to get that to stop. Outside of that, my phone works fine.
Click to expand...
Click to collapse
As in tkaimg the OTA or trying to flash MJA ROM like Skyrockets or Sacs ?,
Sent from my SPH-L720 using Tapatalk

daniel4653 said:
As in tkaimg the OTA or trying to flash MJA ROM like Skyrockets or Sacs ?,
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
The OTA. It doesn't recognize any update as being available anymore. It went from MDC to MDL to MF9 just fine. Then stopped. It says it's up to date now? I'm not sure what's going on with it, but I rerooted it and it works fine. I even innitialised it on KIES to set it all the way back to stock MF9 but it still won't show any update as being available for 4.3

daniel4653 said:
I want proof lol. go to mja again and go back to mf9 lol
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
I tried it just barely as I want to go back to my mf9 rom with the stock kernel. You get a secure error on pit and also a firmware revision error "fused 4 .... 1" can't remember what the word was where the dots were. It was a no go for me. I tried to odin back to mdc like was mentioned in the previous posts.
:EDIT Definitely don't try this. Caused my data partition to get corrupt. Couldn't format it. Couldn't pit restore it. Philz recovery couldn't mount it. Finally found an option to format data and sdcard. This allowed me to format data and restore. Once again Definitely don't try if you have the mja bootloader. (I'm back up and running and will let other figure this out.)

I just found out why I was able to go back to 4.2.2!!! When I updated to 4.3 via OTA a couple of days ago, I plugged it in to KIES 3 and noticed it said "PDA:MJA, Phone:MF9, CSC:MJA".... notice the phone says MF9! I don't know how that happened, but I didn't question it at the time because it was OTA. I thought it was supposed to be that way. Last night before I went to bed I manually flashed the 4.3 update zip after using KIES to initialise my phone back to complete stock. (It wouldn't load the zip when I was rooted) Anyways.... Well this morning I plugged it in to KIES 3 after flashing the 4.3 update.zip last night and it said MJA on all three. I'm not sure how that happened, but I only got part of the OTA update a couple of days ago it appears, and thus being, it is the reason I was able to revert. Sorry if I got anyones hopes up. I just went back and edited a warning in my first post with instructions.

Bummer!!! lol i was getting all excited.

wilsonwa said:
I tried it just barely as I want to go back to my mf9 rom with the stock kernel. You get a secure error on pit and also a firmware revision error "fused 4 .... 1" can't remember what the word was where the dots were. It was a no go for me. I tried to odin back to mdc like was mentioned in the previous posts.
:EDIT Definitely don't try this. Caused my data partition to get corrupt. Couldn't format it. Couldn't pit restore it. Philz recovery couldn't mount it. Finally found an option to format data and sdcard. This allowed me to format data and restore. Once again Definitely don't try if you have the mja bootloader. (I'm back up and running and will let other figure this out.)
Click to expand...
Click to collapse
I'm having the same issue that you had with the data partition being corrupt. I had stupidly tried to downgrade stock MJA to MF9 before checking with the forums if it was possible. It got stuck in the Firmware error message (can't remember what it exactly said), but got to restore it to a stock MJA. And now its data partition cannot be recognized in any computer. IE: Whenever I plug it into the computer it used to show that it is connected via USB and give me the MTP option. Now it will not even do that and I cannot access its data partition via the computer. Kies won't even recognize it.
How did you get to format data and sdcard?
EDIT: OK, dont know how, (I'm blaming crappy cable) but now I do have access to the phone. In other words it's working normal. But in case that this were to happen again, it would be awesome to know how to format data section, so as it can be recognized by the computer. Thanks in advance.

[Q] 4.3 update frozen on Odin screen

I downloaded the official OTA update. When I went to install it the phone needed to reboot and now I've been stuck looking at the Green Android screen saying Downloading... Do not turn off target!!! and in very small writing could not do normal boot, Odin mode. I am rooted. Please help

What version is the phone? I'm reading up on things in preparation of updating myself. I'm on MF3 and for what I've read I need to Odin back to stock before updating since I'm rooted. This may not be your case figured I'd toss it out there.
brought to you by my not so sexy GS4 MF3

padgaland said:
I downloaded the official OTA update. When I went to install it the phone needed to reboot and now I've been stuck looking at the Green Android screen saying Downloading... Do not turn off target!!! and in very small writing could not do normal boot, Odin mode. I am rooted. Please help
Click to expand...
Click to collapse
Same with me. I'm stuck at the emergency firmware recovery screen. My phone was at 4.2 and it did the OTA to 4.3.3 and froze. What do I need to do to go back to stock rom?
SGH-I337 16GB.

schreiber37 said:
Same with me. I'm stuck at the emergency firmware recovery screen. My phone was at 4.2 and it did the OTA to 4.3.3 and froze. What do I need to do to go back to stock rom?
SGH-I337 16GB.
Click to expand...
Click to collapse
You i think you should use Kies to go back they actually have a feature for that. Mine won't even be recognized by the computer or anything.

I am rooted and I was running 4.3 GoldenEye v 11 rom BTW awesome ROM and Dev support best I've ever seen on xda. Any way today I installed my nandroid back up of stock ROM 4.2 Att gs4 sgh 1337 let it boot up any settle in 10 min..when I looked at phone I saw the Att redwhite arrows in task bar I quick shut down WiFi and now under settings status it says update continue or something .now my back up is mdb never ota before. so is this update mf3 the one u that is bootlocked or is it the 4.3 update?? I read some were Att was to start with 4.3 update yesterday what u guys think I should do? Thanks in advance ..
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

Ok I am going to try to go back to stock by using a firmware DL and Odin v3.07 If it works I will tell everyone. If not I may be screwed.

I'm currently on MF3 and had rooted my device previously and would like to upgrade to the new OTA. Would someone be so kind to link me to ODIN and the stock file,so I may return to stock and apply the OTA.
Thank you,

Did anyone go to recovery and factory reset?
Sent from my Nexus 7 using Tapatalk 4

Andrew149 said:
Did anyone go to recovery and factory reset?
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
I'd recommend it but it's to late for me.

This worked for me to unroot.
To unroot, try this. It worked for me. I'm back to "official". However, I've downloaded 4.3 like 5 times already. I can download 100%, but when it reboots to install it stops at 30% then says update failed.
http://forum.xda-developers.com/showthread.php?p=45301834

Ditto
silrosriv said:
To unroot, try this. It worked for me. I'm back to "official". However, I've downloaded 4.3 like 5 times already. I can download 100%, but when it reboots to install it stops at 30% then says update failed.
http://forum.xda-developers.com/showthread.php?p=45301834
Click to expand...
Click to collapse
Same exact problem!
wading through threads for answer!

Ok I have my phone working again. I am not on 4.3 but its back to where it was before I started, which is better than nothing. After running Odin once and it failing like it always does (I have never seen it work) I was able to get the holding down volume, home and power button option to work and I just said no and to reboot and it worked. I then went into SuperSU app and unrooted. I will try to update to 4.3 at a later time. I am glad I wasn't the only one having issues. I usually pride myself on knowing technology and being able to figure it out.

silrosriv said:
To unroot, try this. It worked for me. I'm back to "official". However, I've downloaded 4.3 like 5 times already. I can download 100%, but when it reboots to install it stops at 30% then says update failed.
http://forum.xda-developers.com/showthread.php?p=45301834
Click to expand...
Click to collapse
I had the same problem. The only way I was finally able to upgrade to 4.3 was to use Odin to revert to stock (unrooted) 4.2.2 MF3 using the files on this thread: http://forum.xda-developers.com/showthread.php?t=2502003 Once I did that I ran the OTA update to 4.3 and it worked without any problems.

So if I oden to stock again don't root Then hit the update it should go? Weird thing is I installed my back up today and it a stock backup fresh rich from a oden wipe and it stared DL on its own before I stopped it with killing WiFi. I s this 4.3 update or is it mf3 since I never did that update. ..help. Thanks
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

tried that..didnt work
padgaland said:
Ok I have my phone working again. I am not on 4.3 but its back to where it was before I started, which is better than nothing. After running Odin once and it failing like it always does (I have never seen it work) I was able to get the holding down volume, home and power button option to work and I just said no and to reboot and it worked. I then went into SuperSU app and unrooted. I will try to update to 4.3 at a later time. I am glad I wasn't the only one having issues. I usually pride myself on knowing technology and being able to figure it out.
Click to expand...
Click to collapse
Tried unrooting through SuperSU and managed to still be rooted after reboot, and OTA 4.3 still didnt work
SIGH

Read that u have to oden to stock dint root and the try ota they say this worked gunna oden back to stock and try..
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

thanks
ralphie1267 said:
Read that u have to oden to stock dint root and the try ota they say this worked gunna oden back to stock and try..
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
could you point me in the right direction for that procedure? Im trying to do it on my mac using hiemdall but I think im about to go try odin on a PC.

MasterShakeMan said:
Tried unrooting through SuperSU and managed to still be rooted after reboot, and OTA 4.3 still didnt work
SIGH
Click to expand...
Click to collapse
Take it to Best Buy. "Kies broke your phone" *wink*wink* and they can flash it back to stock without messing up your data. You can do it yourself. Plus they have this mysterious awesome SMART tool. Lol
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

MasterShakeMan said:
could you point me in the right direction for that procedure? Im trying to do it on my mac using hiemdall but I think im about to go try odin on a PC.
Click to expand...
Click to collapse
Use the link in my previous post (post #13). That has the files and procedures for using Odin to get back to stock 4.2.2 and then you can do the OTA upgrade from there.

[Q] Samsung GS4 AT&T Update Fails

I have a Samsung Galaxy S4 through AT&T (which I'm beginning to think was a huge mistake). The phone recently was supposed to receive and update through AT&T update service. The update is about 730 MB and takes about an hour to download, however upon restarting and the update getting to 25% completion it fails and reboots. This wouldn't be a huge issue but my Gallery app has since complete stopped working and the phone is generally acting screwy since the failure.
The first few times this happened i eventually gave up and looked into installing CyanogenMod onto this worthless brick but I can't seem to find any way to get ClockworkMod Recovery onto it.
As of right now I'm sitting here with an $800 POS that I'm stuck with for about another year and 8 months so any help either getting through the update or moving to CyanogenMod would be amazing.

Yeah you cannot install that on your phone, even on MF3.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

So does that mean I'm just stuck? Is there any custom ROM I can replace this with or any way to force the update through?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

uchua said:
So does that mean I'm just stuck? Is there any custom ROM I can replace this with or any way to force the update through?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Have you tried Odin MF3 from the md5 thread in general section. If not give it a go and if it flashes you back to MF3 then re root and install Supersu pro to use survival mode and take the update again.
ROOTED ATT MK2 using Tapatalk

i had the exact same problem. i ended up backing my phone up with titanium, flashing mf3 with odin and then rooting and restoring. then it took the update.

I tried flashing back to stock with Odin and just keeping getting a FAIL! Auth message on my phone and in the desktop application

uchua said:
I tried flashing back to stock with Odin and just keeping getting a FAIL! Auth message on my phone and in the desktop application
Click to expand...
Click to collapse
@uchua Did u try follow my thread for MK2 tar .....u can upgrade to MK2 from MF3 easily or unbricked your MK2. For guide on how to check on POST#2 with image guide....GOODLUCK....let me know how it go.....:good::good:
EDIT: Or u can try this MF3 tar. But remember MF3 and MK2 CAN'T install CWM or TWRP RECOVERY.....u ended up BRICKED.....U CAN ONLY INSTALL SAFESTRAP RECOVERY

Actually it ended up being that the .tar.md5 file I was using was invalid. Upon finding the right ones I managed to reflash the original image and update to MK2. So I guess now my issue is resolved.

Stuck in Samsung Galaxy S4 splash screen

Hey all, in need of a little assistance. I was running the tri-force 5.3 rom. loved it, but saw that 5.4 came out. I tried downloading it and got stuck at a screen where it said it had failed. i then tried to follow the steps by reflashing the stock rom and now i am stuck at the spash screen with the red and yellow words at the top. or it pops up saying System software not authorized by samsung has been found on your phone. with yellow triangle in the middle. Anyone know what i need to get past this screen? I believe i was running an MDL prior to this if it helps. I also can still get into the download screen (power + vol down)

If you were still in mdl then just odin back to mdl and start fresh again.
Sent from my SPH-L720 using XDA Premium 4 mobile app

ROMANTiC KiD said:
If you were still in mdl then just odin back to mdl and start fresh again.
Sent from my SPH-L720 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
which files am i going to need to do this? if you could just point me in the right direction ill be able to figure it out. I appreciate it

We need to know what firmware you were on before you installed the custom rom. If you were on MF9 or older you can download the MF9 tar file and odin it to your phone. If you were on MJA or MK2, then you need to download the MK2 tar file and odin that.

cruise350 said:
We need to know what firmware you were on before you installed the custom rom. If you were on MF9 or older you can download the MF9 tar file and odin it to your phone. If you were on MJA or MK2, then you need to download the MK2 tar file and odin that.
Click to expand...
Click to collapse
im pretty sure it was MDL. i bought the phone in early january. is their a way to check without being able to go past the splash screen?

Alright I figured it out. All i was doing wrong was not installing the firmware in odin. got my phone back up and running. Now my problem is installing triforce 5.4. loved the rom, but everytime i flash it, it gets stuck at the splash screen. any suggestions?

Bump