XDA main post of ODIN says this:
- Extract (unzip) the firmware file
- Download Odin3 v3.09 (From here or here)
- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
- Connect phone and wait until you get a blue sign in Odin
- Add AP_I9300XXUGMJ9_I9300VFGGMJ5_I9300BUUGMJ3_HOME.tar .md5*to AP
- Make sure re-partition is*NOT*ticked
- Click start button, sit back and wait a few minutes.
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (Home+power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!
But SaMmoile for the odin way of flashing says this:
- Extract (unzip) the firmware file
- Download Odin3 v3.09 (From here or here)
- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
- Connect phone and wait until you get a blue sign in Odin
- Add AP_I9300XXUGMK6_2168382_REV00_user_low_ship.tar.md5 to AP
- Add BL_I9300XXUGMK6_2168382_REV00_user_low_ship.tar.md5 to BL
- Add MODEM_I9300XXUGMK6_REV02_REV04_CL1413323.tar.md5 to CP
- Add CSC_OXA_I9300OXAGMK6_2168382_REV00_user_low_ship.tar.md5 to CSC
- Make sure re-partition is NOT ticked
- Click start button, sit back and wait a few minutes.
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (Home+power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!
Which one should I follow? Although my version the Portuguese one.
how many files in the zip you downloaded?
You should read the rules no Questions here read the faqs and guides .
Download the firmware .
Put phone to download mode .
Connect USB cable.
Open Odin .
Add single file tar to PDA
Multipart file follow instructions .
Related
I Can't change rom version on my I9505.
I bought my s4 with French rom.
PDA:MGA / PHONE:MGA / CSC:MG3 (XEF)
I want change it to (XEO) rom but after flashing with Odin 3.07 and rom from sammobile.com on the phone is still old rom.
I flash new Rom follow steps:
1. Download rom from sammobile.com for my phone and my country
I9505XXUBMGA_I9505OXXBMG3_XEO.zip (newest)
2. Extracted md5 from zip.
I9505XXUBMGA_I9505OXXBMG3_I9505XXUBMGA_HOME.tar.md5
3. Power off phone and start on "downloading mode"
Vol down+home+power -->> confirm vol up -->> green android robo and "Downloading" description
4. Launch Odin with admin right etc,
5. Connect phone to Pc via usb. "added" and port in Odin is ok.
6. PDA + file.tar.md5 added (checking file ok.)
7. Auto Reboot and F. Reset Time checked.
8. Start / rom is flashing ( I saw progress on phone screen ) done! (pass message on the Odin etc.)
9. After rebot rom is the like was before flashing !!!
What was wrong? Any ideas?
danq
Is possible to change only CSC to XEO?
On the samsung recovery S4 showing CSC Multi - set to XEF
Quick tutorial
1. Install new rom (post 1)
2. Root
3. Use TriangleAway-v2.99
4. use https://play.google.com/store/apps/details?id=com.manniakk.cscselector and set your CSC / after use you lost all data / backup required.
5. repeat step 1
danq
Hi guys,
I have a Note 3 N900 and I tried to flash the lollipop firmware from sammobile site following the steps provided:
Instructions
1.Extract (unzip) the firmware file
2.Download Odin v3.09
3.Extract Odin zip-file
4.Open Odin v3.09
5.Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
6.Connect phone and wait until you get a blue sign in Odin
7.Add the firmware file to AP / PDA
8.Make sure re-partition is NOT ticked
9.Click the start button, sit back and wait a few minutes
I followed the steps from1 to 9 (at 8 I added the firmware ONLY to AP) and I clicked start. In 2 seconds my electric power went down (**** happens) so now on my phone I have the following msg: FIRMWARE UPGRADE ENCOUNTERED AN ISSUE. PLEASE SELECT RECOVERY MODE IN kIES & TRY AGAIN".
In kies my device is not suported ,. Emergency firmware recovery doesnt work.
What can I do?
Thank you
Hi buddy. re-flash the firmware improves if you now that you install the program
This is a guide for those who accidentally bricked their gt-s7392. For a fix pls download firmware from sammobile.com/firmwares and search for the device name (gt-s7392)...download the one for your region and also download odin 3.07... (google it). Save files to a pc. Now on a pc, extract the firmaware (.tar.md5 file) from the region type you downloaded (e.g s7392xpuank1, or whatever you downloaded). Next hold volume down, home and power button on phone for a long time till phone reboots. There is an option to continue or quit, press the volume up to continue. Plug phone to pc. Now open odin on the pc and select pda. Look for where you extracted the firmware (it is a .tar.md5 file) now wait for it to load and click start.. Wait this might take some time and you are done. The phone will now reboot and no data will be lost. But you will be reverted to stock if you are using custom rom.
Odin 3.09
Try Odin 3.09 that will definitely work
Boot Loop Issue Not Resolved
i've flashed the original firmware from sammobile ( S7390 ) and i tried to wipe cache / data , and the problem still the same ?
Hey folks, an update is available for the SM-N900 in India.
Can any users please provide feedback for this much anticipated update?
Also, would this update work with a n900 baseband version [N900UBUDNC1]?
INSTRUCTIONS (As provided by sammobile)
-Extract (unzip) the firmware file
-Download Odin v3.09
-Extract Odin ZIP file
-Open Odin v.3.09
-Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
-Connect phone and wait until you get a blue sign in Odin
-Add the firmware file to AP / PDA
-Make sure re-partition is NOT ticked
-Click the start button, sit back and wait few minutes
I can't post links as I am a 'new' user but everything's on sammobile's download page.
Feedback will be greatly appreciated. CHEERS!
Just a clarification
Sourz94 said:
Hey folks, an update is available for the SM-N900 in India.
Can any users please provide feedback for this much anticipated update?
Also, would this update work with a n900 baseband version [N900UBUDNC1]?
INSTRUCTIONS (As provided by sammobile)
-Extract (unzip) the firmware file
-Download Odin v3.09
-Extract Odin ZIP file
-Open Odin v.3.09
-Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
-Connect phone and wait until you get a blue sign in Odin
-Add the firmware file to AP / PDA
-Make sure re-partition is NOT ticked
-Click the start button, sit back and wait few minutes
I can't post links as I am a 'new' user but everything's on sammobile's download page.
Feedback will be greatly appreciated. CHEERS!
Click to expand...
Click to collapse
PS: By working, I mean calls, wifi, data etc..
Guide for Flash Firmware (Use Odin in zip file):
Link Mega for No WIPE version+Odin 3.14.4:
File on MEGA
mega.nz
1. Open Odin;
2. Click the BL button and select the file BL ****;
3. Click on the AP button and select the file AP ****;
4. Click on the CP button and select the file CP ****;
5. Click on the CSC button and select the file HOME_CSC ****;
6. Now enter in Download Mode (from the phone off, hold down the volume up key and the power on/off key a the same time and left key when you see the Samsung logo);
7. You will find yourself in front of recovery menu screen where you will be choice with the Volume key button "reboot to bootloader";
8. connect cable to PC and to the device and wait to be recognized by Odin (The ID: COM box will change color and 0 will appear: COM6 or other number);
9. Click Start;
10. The operation will last a few minutes (usually 5-10 minutes). At the end the device will restart itself to complete some operations;
Greetings
Ciccio80
P.S. I downloaded the original files via samfirm - tested and working on my ITV S20.