Hi friends,, my brick story in short is------ brought note 3 sm-n9005 from ebay from a Hong Kong based seller. pics of ap, cp and csc are attached. rooted with chainfire's and installed cwm6 by chenglu. A few days back, flashed bobcat rom version 2(mj7) and later 3( mk2 ) without problems. Was looking for different themes .yesterday flashed balckchrome from s4 forum that also went smooth. Unfortunatly flashed another theme for s4 which was not meant for andriod version 4.3. Pretty stupid .went into bootloop. Had nandroid backup tried to restore but couldn't.
Flashed another rom mk2 from cwm. again bootloop .took the odin route and flashed stock deodesk mj7 by Djembey from this thread.
http://forum.xda-developers.com/showthread.php?t=2461929
Failed again. Then downloaded latest mk2 from sammobile website. The same error (invalid ext4 img) in short failed on all ccounts. Have run out of options. The last thing in mind is to wait for some new bootloader after mk2 which might rescue me as mentioned in this thread by doclucas that new bootloaders might help
http://forum.xda-developers.com/showthread.php?p=47287747
Now pretty depressed.
Can anybody guide what i can do bring to my phone back to life. A few self explanatory pics r attached.
Related
i was having reception problems, thought maybe if i flashed the modem file and NON-HLOS file it would fix it. but now i got no sound, also made a backup, restored backup no change. So what i did was flash to stock 4.3 touchwiz got sound. then i realized i could not root this. so what i did was did some research and follow this. so now im back on GE 4.2.2 and still i have no sound!!!!!!! but i had with 4.2.2 touchwiz help please help please.
Last night i flashed back to stock 4.2.2 and reset my flash counter to get the bell update to 4.3.
All went well with the update. Untill i started playing.... Removed too many bloats... Wanted to start again...
FORGETTING that ATT users and others have been unable to flash back to 4.2.2 after installing 4.3
Trying to ODIN back to 4.2.2 was a mistake, it flashes the bootloaders, then fails at the kernel...
Phone stuck without the 4.3 odin file.... (not posted on sammobile or samsung-updates yet)
Long story short, we are able to flash back to 4.2.2 by flashing I337MUMUAMI1_I337MUWAAMI1_CDR from the domnican republic, then rooting by cfautoroot, installing recovery thru rom manager, then flashing a custom rom/restoring backup.
KNOX warning at bootscreen!!!!
Waiting for odin flashable file of bell 4.3 to be proper again.
Link to Dominican republic 4.2.2 http://samsung-updates.com/device/?i...axy_S_4_Canada
WARNING!!!! Microphone and wifi no longer work without proper modems.
fixed it, seems like all you have to do is download the old modem files.
Naruto101 said:
fixed it, seems like all you have to do is download the old modem files.
Click to expand...
Click to collapse
can u do a picture tutorial if u have the att i337 i have no sound but in my case i dint flash the moden i just flashed the NON-HLOS and i have no sound please help me out with a better explanation
Knox
That was said for a while now, you'll have trouble doing down by the knox
Hey guys
I have a Hong Kong Note 3 N9005. Yesterday I flashed the 4.4.2 sammobile update to my phone using ODIN 3.09. I had auto reboot and f.reset ticked. The ROM was put in AP and I hit start. Then I received the error Invalid ext4 Image. Turns out that Hong Kong versions of the N3 cannot install European ROMs. Since then I have not been able to boot my device into android. I just loop into download mode telling me it detected a firmware update. Kies was no help.
The update DID update the bootloader, so now I cannot go back to stock ROM. I have tried a few things. I tried flashing the stock Hong Kong ROM MK1, it fails. So i found a guy that fixed a similar problem buy removing the aboot.mbn file and repacking the ROM. Tried that too and the ROM flashes but it leaves me in a bootloop. Phone turns on says booting recovery then restarts. I also tried cf-root in an effort to flash another ROM still not working. I cannot get into recovery mode no matter what I do.
It seems I have run out of ideas and am reaching out for help.
Robbbie said:
Hey guys
I have a Hong Kong Note 3 N9005. Yesterday I flashed the 4.4.2 sammobile update to my phone using ODIN 3.09. I had auto reboot and f.reset ticked. The ROM was put in AP and I hit start. Then I received the error Invalid ext4 Image. Turns out that Hong Kong versions of the N3 cannot install European ROMs. Since then I have not been able to boot my device into android. I just loop into download mode telling me it detected a firmware update. Kies was no help.
The update DID update the bootloader, so now I cannot go back to stock ROM. I have tried a few things. I tried flashing the stock Hong Kong ROM MK1, it fails. So i found a guy that fixed a similar problem buy removing the aboot.mbn file and repacking the ROM. Tried that too and the ROM flashes but it leaves me in a bootloop. Phone turns on says booting recovery then restarts. I also tried cf-root in an effort to flash another ROM still not working. I cannot get into recovery mode no matter what I do.
It seems I have run out of ideas and am reaching out for help.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2507403 flash this with cwm or twrp should work
jaythenut said:
http://forum.xda-developers.com/showthread.php?t=2507403 flash this with cwm or twrp should work
Click to expand...
Click to collapse
Hello thanks for replying.
Only problem is I cannot get into cwm or twrp. Any advice on what I can do to try to get CWM or twrp working? I can flash with ODIN. But with the CWM I tried it still just boot loops and does not allow me to get into recovery.
Thank in advanced.
Robbbie said:
Hey guys
I have a Hong Kong Note 3 N9005. Yesterday I flashed the 4.4.2 sammobile update to my phone using ODIN 3.09. I had auto reboot and f.reset ticked. The ROM was put in AP and I hit start. Then I received the error Invalid ext4 Image. Turns out that Hong Kong versions of the N3 cannot install European ROMs. Since then I have not been able to boot my device into android. I just loop into download mode telling me it detected a firmware update. Kies was no help.
The update DID update the bootloader, so now I cannot go back to stock ROM. I have tried a few things. I tried flashing the stock Hong Kong ROM MK1, it fails. So i found a guy that fixed a similar problem buy removing the aboot.mbn file and repacking the ROM. Tried that too and the ROM flashes but it leaves me in a bootloop. Phone turns on says booting recovery then restarts. I also tried cf-root in an effort to flash another ROM still not working. I cannot get into recovery mode no matter what I do.
It seems I have run out of ideas and am reaching out for help.
Click to expand...
Click to collapse
Same Issue here. I tried to install the 4.4.2 N9005XXUENA6_N9005OXXENA5_N9005XXUENA2 update on my Note 3 via odin 3.09.
Got an ext4 update failed error.
After this, the phone's bricked and is stuck on the Kies Recovery Screen. I tried to go into recovery mode in Kies, but it says this model does not have initialization.
I tried installing a 4.3 N9005XXUDMK3_N9005TNLDMK1_N9005XXUDMK2, but again failed. Download mode shows SW REV CHECK FAIL : [aboot] Fused 3 > Binary 2
Can someone please guide me to unbrick my phone?
I don't know what ROM I was on initially. It was the stock ROM that came with the phone.
I dont have CWM and TWRM installed.
Robbbie said:
Hey guys
I have a Hong Kong Note 3 N9005. Yesterday I flashed the 4.4.2 sammobile update to my phone using ODIN 3.09. I had auto reboot and f.reset ticked. The ROM was put in AP and I hit start. Then I received the error Invalid ext4 Image. Turns out that Hong Kong versions of the N3 cannot install European ROMs. Since then I have not been able to boot my device into android. I just loop into download mode telling me it detected a firmware update. Kies was no help.
The update DID update the bootloader, so now I cannot go back to stock ROM. I have tried a few things. I tried flashing the stock Hong Kong ROM MK1, it fails. So i found a guy that fixed a similar problem buy removing the aboot.mbn file and repacking the ROM. Tried that too and the ROM flashes but it leaves me in a bootloop. Phone turns on says booting recovery then restarts. I also tried cf-root in an effort to flash another ROM still not working. I cannot get into recovery mode no matter what I do.
It seems I have run out of ideas and am reaching out for help.
Click to expand...
Click to collapse
Got this response from MrAndroid12 in another thread I'd started:
"This is not a brick at all. Just add a .pit file and restart the upgrade via Odin again.
You should be fine."
I don't know how to add a .pit file though.
I am certain the bootloops are because it flashed the new bootloader. I think your best option is to wait for a dev like indie to release Omega V7 and try to flash that through Odin.
Or if you can extract the different partitions from the original thread you can try push them one by one with Odin.
hallydamaster said:
I am certain the bootloops are because it flashed the new bootloader. I think your best option is to wait for a dev like indie to release Omega V7 and try to flash that through Odin.
Or if you can extract the different partitions from the original thread you can try push them one by one with Odin.
Click to expand...
Click to collapse
It is the bootloader yes. But it NEEDS the bootloader to be able to boot in to KitKat. And there is no downgrading once you've installed the new BL.
Best option is to re-flash via ODIN again and not wait 2 weeks for a Dev to modify a custom ROM...
Solution
Here is the solution:
http://forum.xda-developers.com/showpost.php?p=49426283&postcount=14
m1ndst0rm said:
Here is the solution:
http://forum.xda-developers.com/showpost.php?p=49426283&postcount=14
Click to expand...
Click to collapse
Works thanks
Sent from my SM-N9005 using XDA Premium 4 mobile app
I have rooted my Samsung Note 3 with a custom rom running Jellybean 4.3 with clockwork mod recovery. I have tripped knox due to rooting it. When Kitkat came out March 17th 2014, I wanted to upgrade and go back to official firmware with Kitkat to try it out. Since I have rooted my phone to run viper4android audio kernel I am unable to do an official OTA or Kies update. That said I went about downloading the new Bell Canada Note 3 firmware 4.4.2. I was told to flash a Jellybean Bell Firmware first before flashing the Kitkat version to avoid boot loops or other problems. Trying to do so with Odin in download mode ended in failure just trying to flash jellybean stock. Didnt get that far really. It showed a fail in the Note 3 screen to this effect in read this message (sw rev check fail : sbl1 fused 2 binary 1) . Odin didnt load like I am usually use to seeing by unzipping the firmware into a folder and adding it to the PDA field. After I loaded the .tar file (md5) file into pda it checked it and then told me its finished successfully but the next line it said CS Fail. After hitting start it said fail instantly in the odin window and on the Note 3 I did see a bar showing me the progress of install for 1 second until odin told me of the fail. Now my Note is in download mode and can't get past this problem to get it running again! Please any help would be greatfull to getting me past this problem and onto Kitkat or even back to Jellybean. Any other questions you may have I will supply you the info.
Thanks
Nervous Android user!
weston109 said:
I have rooted my Samsung Note 3 with a custom rom running Jellybean 4.3 with clockwork mod recovery. I have tripped knox due to rooting it. When Kitkat came out March 17th 2014, I wanted to upgrade and go back to official firmware with Kitkat to try it out. Since I have rooted my phone to run viper4android audio kernel I am unable to do an official OTA or Kies update. That said I went about downloading the new Bell Canada Note 3 firmware 4.4.2. I was told to flash a Jellybean Bell Firmware first before flashing the Kitkat version to avoid boot loops or other problems. Trying to do so with Odin in download mode ended in failure just trying to flash jellybean stock. Didnt get that far really. It showed a fail in the Note 3 screen to this effect in read this message (sw rev check fail : sbl1 fused 2 binary 1) . Odin didnt load like I am usually use to seeing by unzipping the firmware into a folder and adding it to the PDA field. After I loaded the .tar file (md5) file into pda it checked it and then told me its finished successfully but the next line it said CS Fail. After hitting start it said fail instantly in the odin window and on the Note 3 I did see a bar showing me the progress of install for 1 second until odin told me of the fail. Now my Note is in download mode and can't get past this problem to get it running again! Please any help would be greatfull to getting me past this problem and onto Kitkat or even back to Jellybean. Any other questions you may have I will supply you the info.
Thanks
Nervous Android user!
Click to expand...
Click to collapse
you cant flash back to 4.3 when you on 4.4.2 and did you succeed when flashing 4.4.2?
Flashing
hhai2pth said:
you cant flash back to 4.3 when you on 4.4.2 and did you succeed when flashing 4.4.2?
Click to expand...
Click to collapse
I havent been able to do anything. I was on Jellybean 4.3.2 custom rom with a custom recovery and tried to flash it back to a stock version of Jellybean before the update to Kitkat. I didnt get that far to even try flashing Kitkat because flashing Jellybean Canadian stock rom was unsuccessful with the errors I mentioned in my earlier post. Now I am stuck in download mode and unable to flash using odin.
weston109 said:
I havent been able to do anything. I was on Jellybean 4.3.2 custom rom with a custom recovery and tried to flash it back to a stock version of Jellybean before the update to Kitkat. I didnt get that far to even try flashing Kitkat because flashing Jellybean Canadian stock rom was unsuccessful with the errors I mentioned in my earlier post. Now I am stuck in download mode and unable to flash using odin.
Click to expand...
Click to collapse
I think you can power if off by pressing the power button for a few seconds. And then flash a custom recovery, reboot and flash a Kit Kat custom rom via Odin or Custom recovery. Hope it helps.
weston109 said:
I havent been able to do anything. I was on Jellybean 4.3.2 custom rom with a custom recovery and tried to flash it back to a stock version of Jellybean before the update to Kitkat. I didnt get that far to even try flashing Kitkat because flashing Jellybean Canadian stock rom was unsuccessful with the errors I mentioned in my earlier post. Now I am stuck in download mode and unable to flash using odin.
Click to expand...
Click to collapse
Knox was tripped. You said it yourself. Go and read up on Knox.
The answer will be very clear afterwards. It's quite clear to me.
Also, don't take this the wrong way.... but you probably should not have done any of this my friend. Your skill level makes this obvious.
I suggest not getting a Samsung phone next time as Knox is hard to get around (it's possible, I was rooted on 4.3 and I am now on 4.4.2 stock flashed with Odin and Knox is still 0x0).
weston109 said:
I havent been able to do anything. I was on Jellybean 4.3.2 custom rom with a custom recovery and tried to flash it back to a stock version of Jellybean before the update to Kitkat. I didnt get that far to even try flashing Kitkat because flashing Jellybean Canadian stock rom was unsuccessful with the errors I mentioned in my earlier post. Now I am stuck in download mode and unable to flash using odin.
Click to expand...
Click to collapse
what's the CSC of your phone? you should try the one newer vesion of 4.3 cause if it's an older firmware it refused flash
Hi Guys,
After rooting my phone, trying different Custom Roms and reverting to stock a couple of times, I now have soft bricked my S4, or at least I hope it's only a soft brick.
I upgraded from JB 4.3 to Kitkat 4.4 and TWRP recovery a couple of months back. I live in Australia and as yet we don't have access to Stock Kitkat 4.4, so I flashed the United Kingdom XXUGNG8 (BTU) firmware. The phone began to lag and a couple of the functions refused to work, so without thinking I attempted to flash back to JB 4.3.........I know, I know you can't do that, but tat the time I was frustrated with it's performance and I didn't think before I acted.
Anyway, first I was unable to enter Recovery mode......nothing worked, the phone would just boot to the error screen. I was able using Odin 3.07, T erase all, flash a .pit file and obtain a "pass".
Get pit for mapping
Firmware update start
RQT close
Res ok
Removed
Remain Port.......0
All threads completed (Success 1/Fail 0)
Then when I attempt to flash a stock rom, it fails every time at "System Write".
I now have discovered that a "Phil's Touch recovery .tar" can be flashed, but nothing else.
When I boot the phone up, it hangs at the Samsung Galaxy S4 iGT9505 screen.
What have I done wrong guys, have I completely corrupted the phone, or is it recoverable? Please Help.
Regards.
You can't revert back to 4.3.
So flash a custom rom or a stock 4.4.2 rom and you will be fine.
Lennyz1988 said:
You can't revert back to 4.3.
So flash a custom rom or a stock 4.4.2 rom and you will be fine.
Click to expand...
Click to collapse
Yes thanks for your reply. I re flashed a pit file and stock rom together and it appears to be working fine now.
Hello. Today I installed on my notes 3 SM-N9005 lollipop 5.0 version Poland but I found them a few problems: the first is that the vibration of the keyboard does not work. I found two of the slowdowns in the task manager. Now if I want to return to kitkat I can do fleshando firmware via Odin? ??
+1
I asked the same question with no accurate answer, i found a thread on how to downgrade from leaked ver. Of lolipop and not the official one and i won't risk trying this method, what I'm asking for is it possible to downgrade to official kitkat using odin specially that i have ticked update bootloader button when i flashed official Lolipop.
Will this work or we are risking our mobiles for a brick?
Appreciate if someone answered us with a proven record.
Regards,
however I have seen videos on youtube that have made the downgrade from 4.4.2 to 4.3 fleshando only the firmaware dacendo and then wipe data / cache. I think the same procedure also applies to switch lollipop kitkat.
It's safe to downgrade using odin. I did it myself from the leaked and the official release (both of them with the bootloader updated). In case odin complains about size just check my last posts and use the PIT file I provided.
Sent from my SM-N9005
Hi,
I have downgraded from the Polish Lollipop without using a PIT file - successfully. You will need to carry out a data wipe and factory reset, but it worked fine.
I couldn't... flashing ENC2 with Odin gave me size error, flashing with PIT solved that, but my IMEI and Baseband were gone. I gave up at that point, flashed Lolipop again and am back to normal now.
azidhaka said:
I couldn't... flashing ENC2 with Odin gave me size error, flashing with PIT solved that, but my IMEI and Baseband were gone. I gave up at that point, flashed Lolipop again and am back to normal now.
Click to expand...
Click to collapse
it just happens to me .... it would be nice to someone who really knows solve this problem make a tutorial on how to return to kk
Download N9005XXUGNK2 from sammobile and flash with odin, after the flash complete do a factory reset via recovery or your phone wont boot and will be stucked in samsung logo