Hi Guys,
After rooting my phone, trying different Custom Roms and reverting to stock a couple of times, I now have soft bricked my S4, or at least I hope it's only a soft brick.
I upgraded from JB 4.3 to Kitkat 4.4 and TWRP recovery a couple of months back. I live in Australia and as yet we don't have access to Stock Kitkat 4.4, so I flashed the United Kingdom XXUGNG8 (BTU) firmware. The phone began to lag and a couple of the functions refused to work, so without thinking I attempted to flash back to JB 4.3.........I know, I know you can't do that, but tat the time I was frustrated with it's performance and I didn't think before I acted.
Anyway, first I was unable to enter Recovery mode......nothing worked, the phone would just boot to the error screen. I was able using Odin 3.07, T erase all, flash a .pit file and obtain a "pass".
Get pit for mapping
Firmware update start
RQT close
Res ok
Removed
Remain Port.......0
All threads completed (Success 1/Fail 0)
Then when I attempt to flash a stock rom, it fails every time at "System Write".
I now have discovered that a "Phil's Touch recovery .tar" can be flashed, but nothing else.
When I boot the phone up, it hangs at the Samsung Galaxy S4 iGT9505 screen.
What have I done wrong guys, have I completely corrupted the phone, or is it recoverable? Please Help.
Regards.
You can't revert back to 4.3.
So flash a custom rom or a stock 4.4.2 rom and you will be fine.
Lennyz1988 said:
You can't revert back to 4.3.
So flash a custom rom or a stock 4.4.2 rom and you will be fine.
Click to expand...
Click to collapse
Yes thanks for your reply. I re flashed a pit file and stock rom together and it appears to be working fine now.
Related
After flashing 4.3 leak on my I9500 using Odin 3.09, it doesn't boot up as it should, I have wiped data/cache, but to no avail. I even flashed the Russian official 4.3 firmware, but it just doesn't boot up as it should.
When I turn on the phone, the phone stops right after the "Galaxy S4 I9500," screen. I see a black screen right after that.
I tried to downgrade my phone using Odin 3.09, 3.07 and 3.04, but it keeps failing. My S4 shows "unsupported version," when I try to flash stock 4.2.2.
I am guessing this is probably happening because of the newer bootloader, the newer bootloader is making it impossible to downgrade to an older version.
exclaimed said:
After flashing 4.3 leak on my I9500 using Odin 3.09, it doesn't boot up as it should, I have wiped data/cache, but to no avail. I even flashed the Russian official 4.3 firmware, but it just doesn't boot up as it should.
When I turn on the phone, the phone stops right after the "Galaxy S4 I9500," screen. I see a black screen right after that.
I tried to downgrade my phone using Odin 3.09, 3.07 and 3.04, but it keeps failing. My S4 shows "unsupported version," when I try to flash stock 4.2.2.
I am guessing this is probably happening because of the newer bootloader, the newer bootloader is making it impossible to downgrade to an older version.
Click to expand...
Click to collapse
ok try this first use the cf root provided in the cf root thread and then dload the latest 4.2.2 http://samsung-updates.com/details/14135/Galaxy_S_4_Exynos_Octa/GT-I9500/XFE/I9500XXUBMH1.html from here and flash it see what happens
Solved.
The problem was that I didn't flash the stock rom that came with my phone. I flashed that and my phone was restored to its factory settings. However my imei was messed up, it was showing me 0049. I rooted, flashed twrp recovery and used twrp to restore from a backup and I got my imei back along with my data.
I will wait for 4.3 to become flashable and see how it goes then.
hypergamer1231 said:
ok try this first use the cf root provided in the cf root thread and then dload the latest 4.2.2 http://samsung-updates.com/details/14135/Galaxy_S_4_Exynos_Octa/GT-I9500/XFE/I9500XXUBMH1.html from here and flash it see what happens
Click to expand...
Click to collapse
Hi, I got back from version 4.2.2 to say. Thank you. But the 4.2.2 's what I want to install other versions (eg Russian version) still odin error. Is it possible to install other versions?
volkantipi said:
Hi, I got back from version 4.2.2 to say. Thank you. But the 4.2.2 's what I want to install other versions (eg Russian version) still odin error. Is it possible to install other versions?
Click to expand...
Click to collapse
i had this issue on my gs3 , try to move the odin md5 rom file and the odin folder to C: or my documents . maybe one of those directories where u have them right now are too large (odin has issues with long directories)
Hello,
I have an unsuccessful firmware update.
First flashed the last stock rom, cf-autoroot. After it I try to flash the CWM, and this is the end,
Now there is no boot loader, no recovery. I see the "Firmware update encountered an issue...".
The knox is 0x1, Writeprotect enabled.
The only thing is working on the phone is the download mode, but every attempt to flash in Odin fails. (aboot.mng..Fail)
I tried to flash another bootloaders, repartition with pit file, but not works...
Done it on other PC, usb ports...
Now I know what was the wrong with the installation, but I need a solution for this situation.
Please, help me...
You will have to flash through ODIN Kit Kat. You cant come back to 4.3 or 4.2.2 if ya flashed android 4.4.2 and u updated the bootloader. Select one android 4.4.2 firmware in SamMobile for you and update ur phone :highfive:
Thanks for the reply...
The last firmware I flashed was 4.3, and I cannot reflash it.
But I will try a Kit Kat, which one is good for me? I have an unlocked phone and my country (Hungary) does not have it yet.
Can I flash it with knox 0x1?
Thanks for the advice, the phone is working now....
The whole story:
- the phone had 4.3 custom ROM before.
- I flashed the new version with 4.4.2: new recovery, modem and ROM.
- From here I had no sound. I tried to flash everything 3 times, an no sound.
- I searched for this, threre were many good advice, I tried some and the phone not booted.
- Downloaded the latest Samsung firmware (I9505XXUEMKF_I9505OXXEMK3_I9505XXUEMKF), flashed and no sound.
- extracted the modem.bin, flashed, and flashad the ROM again, sound is good, I was very happy.
- CF-autoroot, I saw it was working
- Flashed the CWM recovery, Fail in Odin and...no boot, no recovery, only download mode.
- Flashing the original downloaded firmware (I9505XXUEMKF_I9505OXXEMK3_I9505XXUEMKF) is failed. I don't understand, it is not downgrade...
- Flashing a new Kit Kat (I9505XXUFNB9_I9505EURFNB1_I9505XXUFNB9) was successful.
How can I use a custom ROM again?
I am afraid, if I make an error, cannot flash again the same, I have to wait a new one?
I have rooted my Samsung Note 3 with a custom rom running Jellybean 4.3 with clockwork mod recovery. I have tripped knox due to rooting it. When Kitkat came out March 17th 2014, I wanted to upgrade and go back to official firmware with Kitkat to try it out. Since I have rooted my phone to run viper4android audio kernel I am unable to do an official OTA or Kies update. That said I went about downloading the new Bell Canada Note 3 firmware 4.4.2. I was told to flash a Jellybean Bell Firmware first before flashing the Kitkat version to avoid boot loops or other problems. Trying to do so with Odin in download mode ended in failure just trying to flash jellybean stock. Didnt get that far really. It showed a fail in the Note 3 screen to this effect in read this message (sw rev check fail : sbl1 fused 2 binary 1) . Odin didnt load like I am usually use to seeing by unzipping the firmware into a folder and adding it to the PDA field. After I loaded the .tar file (md5) file into pda it checked it and then told me its finished successfully but the next line it said CS Fail. After hitting start it said fail instantly in the odin window and on the Note 3 I did see a bar showing me the progress of install for 1 second until odin told me of the fail. Now my Note is in download mode and can't get past this problem to get it running again! Please any help would be greatfull to getting me past this problem and onto Kitkat or even back to Jellybean. Any other questions you may have I will supply you the info.
Thanks
Nervous Android user!
weston109 said:
I have rooted my Samsung Note 3 with a custom rom running Jellybean 4.3 with clockwork mod recovery. I have tripped knox due to rooting it. When Kitkat came out March 17th 2014, I wanted to upgrade and go back to official firmware with Kitkat to try it out. Since I have rooted my phone to run viper4android audio kernel I am unable to do an official OTA or Kies update. That said I went about downloading the new Bell Canada Note 3 firmware 4.4.2. I was told to flash a Jellybean Bell Firmware first before flashing the Kitkat version to avoid boot loops or other problems. Trying to do so with Odin in download mode ended in failure just trying to flash jellybean stock. Didnt get that far really. It showed a fail in the Note 3 screen to this effect in read this message (sw rev check fail : sbl1 fused 2 binary 1) . Odin didnt load like I am usually use to seeing by unzipping the firmware into a folder and adding it to the PDA field. After I loaded the .tar file (md5) file into pda it checked it and then told me its finished successfully but the next line it said CS Fail. After hitting start it said fail instantly in the odin window and on the Note 3 I did see a bar showing me the progress of install for 1 second until odin told me of the fail. Now my Note is in download mode and can't get past this problem to get it running again! Please any help would be greatfull to getting me past this problem and onto Kitkat or even back to Jellybean. Any other questions you may have I will supply you the info.
Thanks
Nervous Android user!
Click to expand...
Click to collapse
you cant flash back to 4.3 when you on 4.4.2 and did you succeed when flashing 4.4.2?
Flashing
hhai2pth said:
you cant flash back to 4.3 when you on 4.4.2 and did you succeed when flashing 4.4.2?
Click to expand...
Click to collapse
I havent been able to do anything. I was on Jellybean 4.3.2 custom rom with a custom recovery and tried to flash it back to a stock version of Jellybean before the update to Kitkat. I didnt get that far to even try flashing Kitkat because flashing Jellybean Canadian stock rom was unsuccessful with the errors I mentioned in my earlier post. Now I am stuck in download mode and unable to flash using odin.
weston109 said:
I havent been able to do anything. I was on Jellybean 4.3.2 custom rom with a custom recovery and tried to flash it back to a stock version of Jellybean before the update to Kitkat. I didnt get that far to even try flashing Kitkat because flashing Jellybean Canadian stock rom was unsuccessful with the errors I mentioned in my earlier post. Now I am stuck in download mode and unable to flash using odin.
Click to expand...
Click to collapse
I think you can power if off by pressing the power button for a few seconds. And then flash a custom recovery, reboot and flash a Kit Kat custom rom via Odin or Custom recovery. Hope it helps.
weston109 said:
I havent been able to do anything. I was on Jellybean 4.3.2 custom rom with a custom recovery and tried to flash it back to a stock version of Jellybean before the update to Kitkat. I didnt get that far to even try flashing Kitkat because flashing Jellybean Canadian stock rom was unsuccessful with the errors I mentioned in my earlier post. Now I am stuck in download mode and unable to flash using odin.
Click to expand...
Click to collapse
Knox was tripped. You said it yourself. Go and read up on Knox.
The answer will be very clear afterwards. It's quite clear to me.
Also, don't take this the wrong way.... but you probably should not have done any of this my friend. Your skill level makes this obvious.
I suggest not getting a Samsung phone next time as Knox is hard to get around (it's possible, I was rooted on 4.3 and I am now on 4.4.2 stock flashed with Odin and Knox is still 0x0).
weston109 said:
I havent been able to do anything. I was on Jellybean 4.3.2 custom rom with a custom recovery and tried to flash it back to a stock version of Jellybean before the update to Kitkat. I didnt get that far to even try flashing Kitkat because flashing Jellybean Canadian stock rom was unsuccessful with the errors I mentioned in my earlier post. Now I am stuck in download mode and unable to flash using odin.
Click to expand...
Click to collapse
what's the CSC of your phone? you should try the one newer vesion of 4.3 cause if it's an older firmware it refused flash
Hello there. So, this is my actual situation: I have a galaxy s4 on stock Lollipop. Due a few issues, I decided to try to downgrade to kitkat I flashed via Odin a stock kk fw, but unluckyly I Haven't considered Knox bootloader, and now the phone stucks in bootloop. I tried to enter recovery, but it doesn't even work.
Is there any way to save it? Actually, I'm downloading stock lollipop firmware to flash it from Odin. Could it work ?
Thanks everyone will give help
Yes, flash the latest stock ROM in Odin to get the phone back to stock.
As the title says.... I'm trying to get everything back to close to stock
I have tried to install the file "I337MVLUGOC4_I337MOYAGOC4_I337MVLUGOC4_HOME.tar.md5" from sammobile, which is suppose to be the stock 5.0.1 Telus rom.
It installed and sorta worked, but at the welcome screen I am greeted with basically all the g-app services and such crashing repeatedly....
I have also tried installing "AOSP-5.1.1-20160410-jflte" with TWRP and it gives me a bootloop....
Does anyone know what I may be doing wrong??
EDIT: So, a second attempt at installing the stock rom worked. But now I'm running in to the no wifi issue.... Can't enable wifi
Flash any stock qb1 Canadian stock rom and perform a factory reset from stock recovery before letting the newly-flashed ROM boot for the first time.