Data Connectivity Dropping Cured - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

I just wanted to share my experience with some issues I had with my cell connectivity randomly dropping during the day and then randomly coming back. AT&T was no help what so ever and their only solution was to wipe my device (I'm rooted).
The Cause: Crappy LTE coverage in my area
I live between two towers that offer LTE coverage in my area, but not close enough to one or the other for them to connect. I solved the random drops by disabling LTE in the networks menu and then also going to *#*#INFO#*#* and using GSM only in that menu. I miss no more calls and everything works now. Apparently the phone was trying to get on LTE, succeeded in a handshake, and then didn't have enough signal to continue. It would then drop and try to reconnect several times before attempting to jump back on the GSM tower I can throw a rock and hit.
I can only hope AT&T gets their crap together and I hope this helps anyone with similar issues

Related

2G/3G connection every now and then falls away.

2G/3G connection every now and then falls away.
--------------------------------------------------------------------------------
I have the following problem.
Hi I have a plan with extra fast with endless online. But every now and then suddenly falls away and my connection voice and 2G/3G can I just restore it in airplane mode to turn back and pick up.
Are there more people with same problem? I have an G1. The SIM card only 8 weeks old.
I like to hear from you.
I think most T-Mo customers suffer from that, you see they have very small 3G coverage and Edge is super slow on tmobile. You must've had a faster carrier like veri$on,$print,At$T,O2, etc before. Well i had sprint before and they had some great speed and i always had Evdo, but now i only get this damn edge connection.

Fix/Workaround for mobile data connectivity problems (3G/H/H+ dropping connection)

I've been following the mobile data connectivity issue that some users are experiencing (where data connection drops randomly, apparently coinciding with a lot of switching between 3G/H/H+).
Initially, people suggested disabling 'fast dormancy' using *#*#9900#*#*, however, this did not work for many, including myself.
In this post http://forum.xda-developers.com/showpost.php?p=15250511&postcount=6, there appears to be a solution, albeit a workaround.
I have started this thread, as there are so many separate threads about this issue, and only the Telstra Australia thread had this answer (as far as I've read). I have copied the post (a repost from whirlpool) by dusty_nz below. Basically, the problem is serious, the guys from Samsung have insisted this will be fixed in KE9, but there is a workaround in the mean time (disabling H+ and H, or just disabling H+ using *#301279#). This may seem drastic to speed freaks, but 3G connection alone should still give you 1.5 Mb up/down if you can put up with that. This has worked for me, no more data stalling, no more server errors etc. etc. I hope H/H+ will be fixed in future firmware.
Here is the post:
dusty_nz said:
Found this on
http://forums.whirlpool.net.au/archive/1714413
****************** FIXED ******************
After contacting Samsung for an insane period of time (ended up on an international call to England i think... or now that i think about it could have just been some English guy in Aus lol) I have got an official explanation and confirmation that this issue is being looked into for KE8 (but it appears that KE8 has been launched in India already so it might be KE9).
*disclaimer*
I am no expert on mobile technology this in-depth however the (probably very) dumbed down version the Samsung guy told me was this;
*end disclaimer*
The problem stems from the fact that this phone has 3 forms of data connection, 3G, HSDPA, and HSPA+.
3G is what we have all had since 3/Telstra launch 10 years ago.
HSDPA is the 7.2mbps connections that we got after that.
HSPA+ is the full fledged 42mbps Next G stuff that only Telstra has.
The problem is, when you are just using the phone as "a phone" it idles on a 3G connection to save battery and when you initiate a data connection it flicks on to the higher connection protocols for better speed.
What is supposed to happen when you initiate the data connection is the phone checks for H+ connection, then for H and then finally 3G. For some reason if you arent with Telstra or are in an area without HSPA+ the phone gets hung up for too long attempting to initiate the H+ connection and refuses to drop back to H!
Also, even if it does give up on H+ it then has an issue with falling back to 3G. Resulting in the problem that if it cant get H+ or the tower is too flooded for a H connection you get absolutely nothing until you restart the data mode within the phone, renegotiates with the tower and BAM, you are back in business.
So... there are 5 fixes;
1. Wait for KE9 (or what ever firmware fixes the modem timings etc)
2. Get a Telstra sim and never leave an area that has H+
3. Turn off/on data mode whenever it happens
to which i told him they were stupid answers and completely unacceptable, but then he came out with this complete gem!
4. using service code *#301279# you can turn off HSPA+ completely forcing it to start the data connections on HSDPA
5. using *#301279# again you can just turn off HSPA+ and HSDPA meaning it instantly starts downloading the data on 3G without delay
Now yes, i thought... great... ive bought this $779 phone that has all the latest and greatest technology and I cant even use it! But, I did some testing!
First of all my normal sim is Vodafone so turning off HSPA+ is an obvious one for me, im never going to get it so why bother. So now that the phone only attempts to get a connection with HSDPA the need to turn off and on data connection was getting more and more rare but still having the problem (i have a feeling that is due to congestion?). So i bumped it down to 3G only and it works perfectly 100% of the time!
The point of these faster connection protocols is speed so i did testing.
Vodafone sim, 4 bars of signal in the middle of a shopping centre.
HPSA+ turned on = 4mbps down, 1mbps up
HSDPA turned on = 4mbps down, 1mbps up
3G only = 3.5mbps down, 1mbps up
did this over and over and over again and to be perfectly honest, im willing to lose 500kbps to make sure that data always works and if you are just doing general web browsing the time it takes to initiate the HSDPA connection wastes more time than the slightly slower speeds with 3G does.
Now obviously this only works fine in my situation, if you are with Telstra and going from HSPA+ down to 3G means going from 20mbps to 3... i would be pissed. But for the rest of the country you are talking about a loss of less than 1mbps so in real world situations with just small amounts of burst data its fine
TLDR; Try and go online and the 3G up arrow lights up but never actually downloads anything
Dial: *#301279# – Change HSPA revision – Release 5 HSPDA only
test, if still a problem
Dial: *#301279# – Change HSPA revision – Release R99 HSPA off
Your welcome, Peace out!
Click to expand...
Click to collapse
this works! thanks!
Cheers!
Just tried this and I got 1800kbps on 3g!!
Hmm, i played around with those codes. If i choose to drop H+ and H, stays on 3G, but speed is crappy for me. So i want to drop only H+, but when i do that phone stays only on 3G too, not attempting to connect to H. Am i doing something wrong ?
Sp1tfire said:
Hmm, i played around with those codes. If i choose to drop H+ and H, stays on 3G, but speed is crappy for me. So i want to drop only H+, but when i do that phone stays only on 3G too, not attempting to connect to H. Am i doing something wrong ?
Click to expand...
Click to collapse
*#301279#
Option [1] Release R99(HSPA OFF) - This should turn H+ and H off
Option [2] Release 5(HSDPA ONLY) - This should turn just H+ off (what you want)
Option [3] Release 6(HSDPA/HSUPA) - This should turn H+ and H on
To test this, you might want to make sure you are in an area that can pick up 3G, H and H+.
One week on since I selected Option [1] and I have not had any data stalling issues, before I was having data dropping every few minutes whilst browsing.
I tried Option [2] and still had the stalling issue.
Good luck.
tomelsmith said:
*#301279#
Option [1] Release R99(HSPA OFF) - This should turn H+ and H off
Option [2] Release 5(HSDPA ONLY) - This should turn just H+ off (what you want)
Option [3] Release 6(HSDPA/HSUPA) - This should turn H+ and H on
To test this, you might want to make sure you are in an area that can pick up 3G, H and H+.
One week on since I selected Option [1] and I have not had any data stalling issues, before I was having data dropping every few minutes whilst browsing.
I tried Option [2] and still had the stalling issue.
Good luck.
Click to expand...
Click to collapse
I hardly ever get H+, which is why i want to turn it off, thing is if i choose option 2, i only get 3G, while with option 3 i get 3G and H (probably H+ too if i were in the right place). Option 1 works fine, doesn't seem to stall, but 3G speed is crap in my network, that's why i wanted option 2.
Tried all three settings and I am getting about the same speeds with all three settings, 3600-4200 down and 1550-1620 up. So will try setting 1 to see if my connection carries on dropping out.
Thanks
Wat is the code for miui
Sent from my GT-I9100 using XDA Premium App
I actually tried this before on a few different radios and it didn't really work. The real problem I have is when I get in an elevator for a minute and get out shortly. It's not long enough in the elevator for the phone to say "No Signal" but it's still long enough for the data connection to hang and never bother hooking back up when I get off the elevator.
I'll try again though... will report back.
same here .... i tried the three options but problem persist
I have tried the codes above, including disabling dormancy but my internet still will not connect to the internet. Please help.
I'm with Optus (TPG) and I never really see H. It's either 3G, or H+.
I tried disabling H+ (option 2), and like the other guy now I only see 3G.
My Speedtest with only 3G was:
Down - 228.2kB/s
With H+ enabled (option 3), my Speedtest was:
Down - 482kB/s (but it's been as high as 1103.9kB/s in previous tests.
For now I'll just keep it as it is and put up with the occasional freezes. Hopefully it's fixed soon in a firmware release.
i cant seem to get the codes working.. after i dial *#301279# nothing happens, no menu nothing. tried on my wife's galaxy s 2 same thing.. is there an app to disable HSDPA?
\\Issue solved
Is this issue mainly due to the carrier?
I did not have this problem b4. Now I found that my phone might suffer from this.
Tried to disable the H+ or H & H+ at the same time, it seems the issue is still there.
I am on Vodafone Australia network. And I just raised this similar topic on Whirlpool, if you guys would like to discuss this network problem on an OZ forum, plz refer to the below
http://forums.whirlpool.net.au/forum-replies.cfm?t=1744684
Cheers
Updating to XXXKG2 fixed 90% of my problems, on vodafone au.
Sent from my GT-I9100 using XDA App
MealsOnWheels said:
Updating to XXXKG2 fixed 90% of my problems, on vodafone au.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
For me it's still the same, coming from KF2 to KG2. Will try KG3.
Any one with new modem firmware that 100% fixed the 3G drop/stuck connection(only see upload sign lit) bug? I am running KG1 modem(stock rom no root) and still experiencing this issue on ATT in Bloomington, Indiana USA.
I also realized S2 uses Infineon modem chip which is the same supplier for the iPhone3G that had the 3G slow down, drop call issue..
Could this issue be the chip at the end?? Why would Samsung taking forever to fix this critical flaw on I9100??
I'm on 3 UK. Had the cutout on KG1 and KG2. But it's definitely gone away in KG3.
I'm on Airtel India on KG3 and I still have the data stalling issue.
Seems to me like this issue surfaces more when I'm at home on wifi and then step out to data.
Trying out these service codes now to see if it helps to turn off high speed data.
It would make sense for Samsung to include these settings in the rom itself even for those without issues but want to save battery.
Sent from my GT-I9100 using Tapatalk

Problem Keeping LTE Signal

I am having a problem on my phone where I am frequently losing LTE - my phone goes to 4G and I have trouble with data.
If I turn Mobile Data off and back on it connects to LTE again.
This seems like it started happening after I updated to the GoldenEye ROM - before that I feel like my LTE coverage was a lot better and more consistent.
Can anyone advise me on how to diagnose and hopefully fix this issue?

Verizon network question

I use MVNOs because I am on a tight budget. With MintSim and MetroPCS which use T-mobile I had a below average signal on this phone and with Boost which uses Sprint I had a dreadful signal. Currently I'm using a Verizon MVNO which has an excellent signal except for one issue. The signal will be great for a day then it will become poor. The signal strength will not return to previous strength unless I power the phone down for a minute and then turn it back on. Then the signal will be great for about a day again until it goes bad and I have to turn the phone off and on again.
I tried a factory reset which didn't help. Toggling airplane mode on and off doesn't help. Rebooting the phone instead of powering off doesn't help. Changing the preferred network type in settings doesn't help.
If I type *#*#4636#*#* and change the network from LTE/CDMD/UMTS (Auto PRL) to one where LTE is replaced by a different network and then switch back to LTE/CDMA/UMTS that restores the strong LTE signal but powering the phone on and off is faster.
I could change the APN settings with T-Mobile but with Verizon the APN settings are greyed out and there is no way to edit the current APN or add a new one.
Mobile Data Always Active is already enabled in developer options.
Does anybody know what I could do so the Verizon network strength doesn't eventually drop requiring shutting the phone off and turning it back on to refresh the network connection?
I have owned a lot of phones over the years but never one with signal issues like the PH-1. Essential support won't help because they escalated my ticket to RMA when I was still on T-Mobile. Since an RMA would provide me with a refurbished phone that somebody else probably returned due to the signal strength issues I would rather figure out how to get my current phone to work right with Verizon if that's possible.
When I went out I had no data despite the signal meter showing a strong signal. It turned out my phone had the wrong APN (Verizon instead of Trac Wireless) but unlike GSM carriers the APN settings are locked so TotalWireless (which is owned by Trac Phone) had to send my phone the correct APN. My data actually works now and so far the signal has been very strong but it's too early to say if the same signal problem I wrote about will pop up again since the APN was only corrected a few hours ago.
If nobody else has experienced a similar issue with the quality of the Verizon signal losing strength after the phone has been asleep for an extended period of time then maybe my phone is defective after all. I guess I'll just keep my fingers crossed that the signal still looks good when I wake up tomorrow.

Starting to get annoyed with the O variant phone in the UK

It's all too frequently dropping 4G or LTE connection when on the move. It's showing a connection, good strength too, but no data connection working. Often needing an airplane mode toggle or reboot to get online again.
5G is disabled as I'm nowhere near a 5G area.
Anyone got any ideas? Different firmware or something?
I'm starting to regret moving away from the SD note 10 plus I had. That phone was rock solid.
joebongo said:
It's all too frequently dropping 4G or LTE connection when on the move. It's showing a connection, good strength too, but no data connection working. Often needing an airplane mode toggle or reboot to get online again.
5G is disabled as I'm nowhere near a 5G area.
Anyone got any ideas? Different firmware or something?
I'm starting to regret moving away from the SD note 10 plus I had. That phone was rock solid.
Click to expand...
Click to collapse
I read that some people have issues with connection with some ISP providers. Try putting it on 3G and see if it works fine then. If it does then ISP has either sn issue with 4G network or phone needs a firmware fix to solve 4G connection issue if this isn't a hardware problem thought. Since for me it works fine here and my 4G shows all time and I even have 4G+ as status without an issue.
try disabling WiFi calling that helped in my case
Tried all that. Went into a town and it didn't again.. Had to force it onto 4g to get a connection.
Tried all that. Went into a town and it didn't again.. Had to force it onto 4g to get a connection. This is what I had before I forced the change in network.
Haven't had any issues myself, on giffgaff. Tried O2 briefly, it seemed okay too.
joebongo said:
Tried all that. Went into a town and it didn't again.. Had to force it onto 4g to get a connection. This is what I had before I forced the change in network.
Click to expand...
Click to collapse
Give this app a try, might help fixing it to one band
https://play.google.com/store/apps/details?id=com.ray.samsungbandselection
Yes u have that thanks. It seems to be band switching that's the problem. Or is it possible my carrier has live but unused bands that the phone is locking into? So when I travel I find myself with a dead data connection?

Categories

Resources