Hi all
I can't get a Mobil/cell connection when using roms like pa or catalysm. I also don't get a pin request. On stock everything works fine, carbon Rom was also fine.
Any ideas?
Sent from my Nexus 7 using xda app-developers app
same here, with a Samsung Galaxy Note 2.
It happened with several Android 4.3 & 4.2.2 ROM (my fav is PA).
Finally I gave up und went back to stock and then to a slimmed near-stock 4.1.2 ROM (Thunder Lite).
Suddenly and ever since there are no call in/out problems anymore.
Conclusion: for my Samsung device I suspect driver/or radio incompatibilities. I'll wait for Sammy to release a proper 4.3 stock ROM.
But that shouldn't be a problem for Nexus 4.
ok i finally made it.
The Problem was the Recovery!! The latest teamwin recovery was installed. Now i changed to clockworkmod and everything is fine.
Mayby the recovery was the problem or something went wrong on install.
but now its working:victory:
I always use CWM and PhilZ Touch (based on CWM), and had never problems with the Recovery.
Hi,
After installing PARANOIDANDROID following this post . The baseband isn't recognised inside PA, so i tried to flash it after the rom but no change. I read a lot about loosing the Partition where the IMEI is stored an got really scare xD After unroot and going back to stock Rom everything is fine. So PA didn't recognise either the partition or the baseband ? Am I doing anything wrong because in no faq was my problem explanded or mentioned.
Sorry for my bad english.
Regards,
Zardorac
nobody ?
You most likely did not do anything wrong, I've been seeing a lot of issues lately with the radio after people flash PA 3.99. I had an issue too last time I installed PA where my radio stopped working completely no matter what the ROM, and I wound up having to use the LG download tool to fix it.
Sent from my Nexus 4 using xda app-developers app
so best option wait for next release or is there any other option.
Regards,
Zardorac
Hey everyone, to make a long story short I'm one of those damned souls that installed chainfire 3d on a non gingerbread device (yes I did not read the description properly but seriously, who is using gingerbread in 2013 and why hasn't the app been taken down from play store?) And pretty much did not find any help anuwhere on how to remove it short of going back to stock or installimg a custom rom.
I did not have backup of nand or anything because I did not plan on installing a custom rom, anyway I imstalled phoenix rom 9.0 and it's okay but I have NO SOUND whatsoever and phone reboots itself mostly when I try to edit something I'm typing with the cursor such as this parragraph.
I could not find a stock rom for my phone, i9500 factory unlocked artic blue, box says it is the model "for the americas" and has the letters UD.
There an ota update for phoenix rom 10.1...would fix my issues? Or will I have to install something else? I would prefer a custom rom that's as close to stock as possible and it has to be 4.3 because I can no longer go back to 4.2.2 it seems because a change of bootloader...
Sent from my GT-I9500 using Tapatalk
Just to clarify, I do know the chainfire3d thing is my fault and no one elses...
Sent from my GT-I9500 using Tapatalk
Umm...hello?
Sent from my GT-I9500 using Tapatalk
Ive been having issues with my d800, no matter what rom/kernel i use it randomly reboots i guessing because it over heats because it gets hot and then boot loops, i have to manually power off and let phone cool before powering on again. Also alot of the times i press the power but or double tap to turn the screen on and it doesn't come on, it is illuminated lightly but its still black I rooted using iroot25 and autorec for recovery. The most stable rom I've found was Candykat and i still get a reboot every once in a while but it boots right back up. I've tried re flashing tot/dll with lg flash tools a couple times now that works fine, and rooting works fine. its just about any rom i use it has issues, could this be a hardware issue? Also Ive tried cwm/twrp/philscwm recoveries and that didn't make a difference. i am using d800 roms just to clear that up. any help would be greatly appreciated.
Baseband version- M8974A-AAAANAZM-1.0.190082
Kernel version- 3.4.0-slim-4.4.2-kk+ [email protected] #1 Fri Jul 11 20:41:49 EDT 2014
CandyKat version- Ck-v1.5.5 Official-20140711
This is my current setup and it seems to work the best, also im not using a kernel tuner right now.
Please ask if you need more info.Ill try to get a logcat if someone can help. im not new to this and it just has me stumped.
Thanks Matt
Anyone?
Bump
Sent from my LG-D800 using XDA Free mobile app
V20G solved my random reboots issue, hyuray
Sent from mako via tapatalk
Mflick86 said:
Anyone?
Bump
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
Hello, I'm having the exact same issues like you, I have my phone for over a year and started with this problem, I have the last Optimus for the AT&T version, do you find a solution?
PesSarmiento said:
Hello, I'm having the exact same issues like you, I have my phone for over a year and started with this problem, I have the last Optimus for the AT&T version, do you find a solution?
Click to expand...
Click to collapse
Yes, well sort of. I sold the phone and they took it apart and apparently the person I bought it off of, had d800 factory covers and the internals were d802 and it also had an d800 ROM so I didn't know ant different. But I'm not sure if that's your issue or not
Sent from my Nexus 5 using XDA Free mobile app
Sometime just cooldown the phone by Puting it in a plastig bag and in the freeze sova that.
Thermal don't load properly during boot.
I tried every possible way to update my Nexus 4. When i update to 4.3 it goes in to a boot loop. Same goes for 4.4.4 update. I tried to use custom rom, but no luck there. I already tested with factory images, but for some reason i cant go beyond 4.2.2. Even Wugs tool kit didn't help, I also did every thing manually, loading new radio, recovery, boot, system, new boot loader (z30). Still cant update.
4.2.2 Works flawlessly. And now i am stuck with it.
Please help me.
P.S After OTA update it still goes in to boot loop.
Tell me the error.. What exactly happens?
Sent from my Nexus 4 using XDA Free mobile app
Unable to update Nexus 4
It doesnt go further then the X logo. That X boot loop. Same thing happens when I update to 4.4.4 it stays at the four circles.
All I can think of is to try a factory image from a different source, just in case that the one you have is corrupted. Also, how are you flashing the factory images? Are you using fastboot?
Unable to update Nexus 4.
Yes I am using Fastboot, i tried different source, custom roms like cyanogenmod. Still no use. I even tried using Wugs tool kit but still cant upgrade above 4.2.2
I'm having the exact same problem, I've tried custom roms using twrp, I've tried all the stock roms using fastboot and adb, and the only thing I can get to boot is the stock 4.2.2 build. Very confusing.
killer2711 said:
I tried every possible way to update my Nexus 4. When i update to 4.3 it goes in to a boot loop. Same goes for 4.4.4 update. I tried to use custom rom, but no luck there. I already tested with factory images, but for some reason i cant go beyond 4.2.2. Even Wugs tool kit didn't help, I also did every thing manually, loading new radio, recovery, boot, system, new boot loader (z30). Still cant update.
4.2.2 Works flawlessly. And now i am stuck with it.
Please help me.
P.S After OTA update it still goes in to boot loop.
Click to expand...
Click to collapse
TheDude1179 said:
I'm having the exact same problem, I've tried custom roms using twrp, I've tried all the stock roms using fastboot and adb, and the only thing I can get to boot is the stock 4.2.2 build. Very confusing.
Click to expand...
Click to collapse
Google also accepts this problem and replaces the devices if there is any warranty left. Some says it has something to do with the radio and some says its hardware fault. If non of these can help you, selling the phone is a simple solution.
J had the same problem..
J sent the phone in warranty and they replaced the motherboard.
Check your emmc chip using brickbug app on play store
Sent from my Nexus 4 using XDA Free mobile app
As mentioned above, this is a hardware issue that happens on some devices.
LG Optimus 2X:
ROM: Tonyp TheROM Build 26 New Bootloader
Kernel: Kowalski Kernel M1 New Bootloader 2.6.39.4 W/ RAM Hack
Bootloader:ICS Bootloader
Recovery: TWRP 2.6.0.0 For New BL
Baseband: 1035.21
Nexus 4:
ROM: Stock 4.4.4 W/ Root (Xposed, GPU Drivers, Dalvik/Bionic Patches)
Kernel: Franco r213
Bootloader: Stock Bootloader (Unlocked)
Recvoery: PhilZ Touch CWM-Based Recovery
Radio:Radio (1.03)[/SIZE][/SIZE]
I'll check my emmc chip when I get home, I'm not giving up yet though. This is just such a strange problem, I'm reluctant to believe its hardware related. Really hope it's not as I have no warranty and a motherboard isn't really worth the cost. Does anyone have anymore info on how this could be a hardware problem ? It works flawlessly on 4.2.2. I find this problem fascinating, would really like to understand it more.
Dude... Check the emmc.. Many phones have a bad chip.. But if its working on 4.2.2 and not above.. That's VERY strange
Sent from my Nexus 4 using XDA Free mobile app
arkangel72 said:
Dude... Check the emmc.. Many phones have a bad chip.. But if its working on 4.2.2 and not above.. That's VERY strange
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Actually, although not common, there have been many cases of this occurring. It is a hardware issue.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Actually, although not common, there have been many cases of this occurring. It is a hardware issue.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Did you every manage to if this problem? I have encountered exactly the same thing. Boot-loops on every other version than 4.2, very odd