[Q] Unable to Start The WiFi & Regional Lock Issue - Galaxy Note 3 Q&A, Help & Troubleshooting

Hi Guyz,
I purchased Samsung Note 3 from saudi arabia and i was able to use the sim card there and it was working fine and when i came to india and i was unable to use the Indian sim coz of Regional lock.I have tried many unlocker website but no luck and tried calling samsung but no luck.I went to local mobile shop dealer to fix this but he screwed up everything..........Previously all was working but only the problem was the sim.....Now i am unable to use the WiFi and when i insert the Indian sim its no longer asking me for the Sim Unlocker code........Now its saying unable to register the network...........
when i try to start the Wifi its just showing Turning on but never start.......what could cause this issue........?????????? Please help :crying::crying::crying:

Flash stock for the wifi issue
Then root
Then use region lock away
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app

Wifi issue
Killberty said:
Flash stock for the wifi issue
Then root
Then use region lock away
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
_______________________________________________________
I have tried that but still same issue........
Used odin and did the official rom installation still wifi is not working and i used the region lock away app and its not working

RULE 5. Create a thread or post a message only once.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer. (Also refer to Rule 16)
So far you've posted this issue in about 8 different threads... Please use this thread ONLY.

Any Update on this issue ????????
Hi Guyz please help me in order to fix my note 3
:crying::crying::crying::crying:

Related

[Q] Cannot get Note3 to display AP or CSC (code *#1234# error)

I have become increasingly frustrated with this device! I am trying to run the *#1234# code in the stock dialer to view my AP and CSC so that I may root via the Root de la Vega method. But when the code runs it just comes back saying "Unable to Process Request". I've tried everything such as dialing just #1234#, *#1234#*, resets, factory resets, posting the question here previously (as I cannot post in the actual forum thread yet due to posting limitations) but it was deleted with no message to let me know why, nothing works. I cannot root safely without being able to view this code and was wondering if anyone else was having the same problem? Not sure if it's relevant but my carrier is T-mobile and I am using the 32gb White model. Everything is still stock. I really need help with this, I'm ready to go back to my note 2 because at least that had root -_-. Someone please help!?
MidniteKitten said:
I have become increasingly frustrated with this device! I am trying to run the *#1234# code in the stock dialer to view my AP and CSC so that I may root via the Root de la Vega method. But when the code runs it just comes back saying "Unable to Process Request". I've tried everything such as dialing just #1234#, *#1234#*, resets, factory resets, posting the question here previously (as I cannot post in the actual forum thread yet due to posting limitations) but it was deleted with no message to let me know why, nothing works. I cannot root safely without being able to view this code and was wondering if anyone else was having the same problem? Not sure if it's relevant but my carrier is T-mobile and I am using the 32gb White model. Everything is still stock. I really need help with this, I'm ready to go back to my note 2 because at least that had root -_-. Someone please help!?
Click to expand...
Click to collapse
As a workaround, perhaps log in to Kies solely for the purpose of checking what your current firmware is? See snapshot here http://i1-win.softpedia-static.com/screenshots/Kies_1.png?1378883026.
MidniteKitten said:
I have become increasingly frustrated with this device! I am trying to run the *#1234# code in the stock dialer to view my AP and CSC so that I may root via the Root de la Vega method. But when the code runs it just comes back saying "Unable to Process Request". I've tried everything such as dialing just #1234#, *#1234#*, resets, factory resets, posting the question here previously (as I cannot post in the actual forum thread yet due to posting limitations) but it was deleted with no message to let me know why, nothing works. I cannot root safely without being able to view this code and was wondering if anyone else was having the same problem? Not sure if it's relevant but my carrier is T-mobile and I am using the 32gb White model. Everything is still stock. I really need help with this, I'm ready to go back to my note 2 because at least that had root -_-. Someone please help!?
Click to expand...
Click to collapse
You have to be rooted and "enable" the entry of service codes via the dialer first.
For the VZW Note 3, I've confirmed this works - Edit the contents of /efs/carrier/HiddenMenu from OFF to ON (must be capitalized)...reboot and you're good to go.
If that doesn't work for non VZW Note 3's, you can try the full steps listed here!
edwmsjr said:
You have to be rooted and "enable" the entry of service codes via the dialer first.
For the VZW Note 3, I've confirmed this works - Edit the contents of /efs/carrier/HiddenMenu from OFF to ON (must be capitalized)...reboot and you're good to go.
If that doesn't work for non VZW Note 3's, you can try the full steps listed here!
Click to expand...
Click to collapse
This is very confusing , if I'm trying to obtain root I need to already be rooted? If I root without using the Vega method I'll trip the knox counter no? I'm trying to avoid that. Seems like a catch 22 to me?
edwmsjr said:
You have to be rooted and "enable" the entry of service codes via the dialer first.
For the VZW Note 3, I've confirmed this works - Edit the contents of /efs/carrier/HiddenMenu from OFF to ON (must be capitalized)...reboot and you're good to go.
If that doesn't work for non VZW Note 3's, you can try the full steps listed here!
Click to expand...
Click to collapse
dxzh said:
As a workaround, perhaps log in to Kies solely for the purpose of checking what your current firmware is? See snapshot here http://i1-win.softpedia-static.com/screenshots/Kies_1.png?1378883026.
Click to expand...
Click to collapse
This helped me out immensely! Thank you so much. Now rooted and no knox counter trip Thank you!
MidniteKitten said:
This helped me out immensely! Thank you so much. Now rooted and no knox counter trip Thank you!
Click to expand...
Click to collapse
Please enlighten us about your AP and CSC versions then
hallydamaster said:
Please enlighten us about your AP and CSC versions then
Click to expand...
Click to collapse
They ended up being:
N900TUVUBM17 & M17 respectively. Seriously, thank you for ending the frustration, this phone has gotten much better now, for a second there I thought I was going to have to deal with buyers remorse.
MidniteKitten said:
They ended up being:
N900TUVUBM17 & M17 respectively. Seriously, thank you for ending the frustration, this phone has gotten much better now, for a second there I thought I was going to have to deal with buyers remorse.
Click to expand...
Click to collapse
Those are the same codes I have. Which AP and CSC files did you use with ODIN?
keverline said:
Those are the same codes I have. Which AP and CSC files did you use with ODIN?
Click to expand...
Click to collapse
I used the files that are located on the 1st post here:
http://forum.xda-developers.com/showthread.php?p=46480545
MidniteKitten said:
I have become increasingly frustrated with this device! I am trying to run the *#1234# code in the stock dialer to view my AP and CSC so that I may root via the Root de la Vega method. But when the code runs it just comes back saying "Unable to Process Request". I've tried everything such as dialing just #1234#, *#1234#*, resets, factory resets, posting the question here previously (as I cannot post in the actual forum thread yet due to posting limitations) but it was deleted with no message to let me know why, nothing works. I cannot root safely without being able to view this code and was wondering if anyone else was having the same problem? Not sure if it's relevant but my carrier is T-mobile and I am using the 32gb White model. Everything is still stock. I really need help with this, I'm ready to go back to my note 2 because at least that had root -_-. Someone please help!?
Click to expand...
Click to collapse
Good to know your problem is shorted out, I just read this thread,next time if u have this type of problem u can install a app called checkfus from google play.
Trying to Root Verizon Note 3
jdomadia said:
Good to know your problem is shorted out, I just read this thread,next time if u have this type of problem u can install a app called checkfus from google play.
Click to expand...
Click to collapse
Having the same problem, but THANK you for the Checkfus recommendation. That does provide the CSC.
It doesn't show AP though.
However, (new road block) my CSC is N900VVZWMI9 , I don't see that in the list https://mega.co.nz/#F!n9JnyI5S!VKmm1hxHlhIxWo1bXeIfLA
So I guess we will have to wait... Correct?
I am having a similar problem, I just opened my Note 3 and when I dial *#1234# nothing happens, if I click send, it actually tries to dial it. I need to know the AP and CSC so I can root. Obviously I can't follow the steps above since I'm not rooted yet.
Remember.. You have to use native dialer when entering codes.. I was using a third party dialer app and it only dialed.
Sent from my SM-N900V using Tapatalk
Do the 1234 and the press and hold the home button, version shd be in multitask menu
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
On T-Mobile Galaxy Note 3, dial *#12580*369# instead of *#1234#.
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
native dialor
i had the same problem realised i was using a custom dial pad use the native dialer when u go in all apps and hit phone then when you dial the codes they work
Thank You!
Killberty said:
On T-Mobile Galaxy Note 3, dial *#12580*369# instead of *#1234#.
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
Thanks it worked! I've been looking for this. Nobody else seems to know that *#1234# will only work on rooted device.
Yes this worked. :good:

The remote control in security setting not active !!

Hi everyone
Can anyone help me to figure out what is wrong here?
I try to activate my account in Samsung find my mobile website
But, they keep telling me " remote control " is off
I turned it on but it still no effect, it's always OFF
Also i complete all the steps in SIM change alert but without benefit !!
My Note 3 is N9005 Rooted
And my Rom is X-Note V2
Plz help & feedback
64 peoples saw my post
Plz someone help !!
Sent from my SM-N9005 using Tapatalk
AJ_MARSHALL said:
Hi everyone
Can anyone help me to figure out what is wrong here?
I try to activate my account in Samsung find my mobile website
But, they keep telling me " remote control " is off
I turned it on but it still no effect, it's always OFF
Also i complete all the steps in SIM change alert but without benefit !!
My Note 3 is N9005 Rooted
And my Rom is X-Note V2
Plz help & feedback
Click to expand...
Click to collapse
I had the same problem. I tried for 2-3 hours everything, from wiping the phone to disabling other system administrator, but nothing.
A couple of days later I tried again and boom, it worked out of the sudden.
Not sure if it is something I did or the activation just took a couple of days.
You can give the google location and blocking feature a try in the meanwhile.
Good Luck and don't forget (in case you did before) to enter your phone number when you try findmymobile.com again
Enviado desde mi SM-N9005 mediante Tapatalk
Come on guys !!
Any idea...
Sent from my SM-N9005 using Tapatalk

[Help]Some weird problems i need help with.

HI there, i have being lurking a lot of time without and account and from the time i learned here how to root and do other cool stuff to android device but now i needed to create an account to ask for help because i cant find any solution.
first a bit of story so you can understand why im so weirded out by my problems.
My dad works in an important carrier here in spain where i live, the 28 it was my birthday and he wanted to gift me some new tech, he managed to get a Samsung Note 3 Live demo unit ( i know all the fuss about it and how it can't be used as a normal phone etc) and i was quite happy to test out this device but as any live demo unit there was the retail mode installed and all, so i decided to find the Stock rom for my phone and ¿flash it? through odin, went perfect, the retail mode disappeared and all the functions worked perfectly (not the network signal obviously) but it was a clear stock rom Note 3, all happy, rooted it installed my apps used it until this weekend.
My father got another one (same device model etc) for him and asked me to make it like mine,i thought this was easy because i still had all the files from mine and all, did the same steps as with mine but when it restarted it entered a loop, the device booted up, the configuration worked kinda weird (wifi not searching from my network), system not working, and after a couple minutes reboot
I decided to test on my functional note 3 the same files and that ****ed my note 3 too same deal rebooting and stuff. WITH THE SAME FILE I USED THE FIRST TIME.
I tested formating everything, flash another recovery, root it use another international stock rom i tryed TWRP and im out of ideas and im in fear of bricking the device even more.
Anyone could help me out.
I have no clue of what is happening or what could i did wrong, i understand there is no way of make it work like a 100% normal phone but i want to flash a rom and be able to use it like a stock note 3 just from my personal stuff.
Both Note 3 are SM-N9005, i cant acces the memory of the phone,but i can put it in download mode and in Recovery,i can flash it with odin and put Clockwork but i tested everything and i cant find any solution.
Please help me!!!:crying:
Download the latest stock Fw for spain from sammobile and pass it via odin v.3.09
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
Download the latest stock Fw for spain from sammobile and pass it via odin v.3.09
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
I will try this but this isnt the same as downloading a ROM from samsung-updates.com for the note 3?
Is 3.09 more efective,reliable or it may affect the procces than using 3.15?
XII_Future said:
I will try this but this isnt the same as downloading a ROM from samsung-updates.com for the note 3?
Is 3.09 more efective,reliable or it may affect the procces than using 3.15?
Click to expand...
Click to collapse
I know that ROMs from sammobile are reliable.
Odin v3.15? Never heard of. I can confirm 3.09 works perfectly for not 3.
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
I know that ROMs from sammobile are reliable.
Odin v3.15? Never heard of. I can confirm 3.09 works perfectly for not 3.
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
Sorry i meant 1.85.
Tested it,still restet when trying to get the ip address of my network and the system keep crashing...
Any other help please??
Extract modem.bin and non-hlos.bin
Build a tar.md5 outta it
Flash without "autoreboot"option in odin twice
Switch on the phone
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
And how to build it? Sry noob is asking
http://www.lmgtfy.com/?q=build+tar+md5+file
__________
If you dont think i am funny:
http://forum.xda-developers.com/showthread.php?t=2522732
Step 2) with only modem.bin and non-hlos.bin
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
http://www.lmgtfy.com/?q=build+tar+md5+file
__________
If you dont think i am funny:
http://forum.xda-developers.com/showthread.php?t=2522732
Step 2) with only modem.bin and non-hlos.bin
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
Thx. Im gonna try that.
Max One said:
Thx. Im gonna try that.
Click to expand...
Click to collapse
Let me know if it works
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
Let me know if it works
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
Nothing not working same problem now it reboots after maybe 7 9 minutes, and same deal the wifi try to get the network but stays all the time in "Confirming if the networs is good" or somthing like that...
Still have no idea what to do.
I just saw something weird, in the back of my Live demo Unit, there is a tag below the battery who says its model SM-N900X but a bit upper in the plastic there is a code with SM-N9005 if this has something to do with all .
Still looking for help please
N900X
I have the same problem.
After flashing retail firmware i've got bootloop.
It is may be because EFS is broken.
Or bootloader blocks normal firmware.
I've tried to flash original bootloader but it fails with error.
Still waiting method to recover it.
XII_Future said:
Nothing not working same problem now it reboots after maybe 7 9 minutes, and same deal the wifi try to get the network but stays all the time in "Confirming if the networs is good" or somthing like that...
Still have no idea what to do.
I just saw something weird, in the back of my Live demo Unit, there is a tag below the battery who says its model SM-N900X but a bit upper in the plastic there is a code with SM-N9005 if this has something to do with all .
Still looking for help please
Click to expand...
Click to collapse
Can u extract the pit of ur working demo unit with this tool and upload it for me/us here please N9005_SaveMyPitFile.zip ?
I have the same problem as u plus somehow i screwed up my pit partition. With a screwed pit partition i cant do anything so im stuck.
Thx in advance.

[Q] How to identify the bootloader version

I had some problems in my GPS accuracy (it was excellent when I bought it)
The device was rooted and upgraded to MJ7 (with maintaining the root status). I've decided to take it to the service center to fix the gps issue. (I removed everything related to the root instead of unrooting).
Just got the device back today. They told me that only software upgrades has been done. GPS is perfect (~3m accuracy )
But, I'm suspecting that the override the whole software including the bootloader.
==> tl;dr
Is there anyway to check if I got the new or old bootloader ?!
*#1234# - AP = Bootloader (if i recall correctly)
Yup, if you ap ends with mjX, X> 1 or mkX, X=anything you have the new bootloader
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Thank you guys...
I think now I'm screwed root-wise :crying: !! I've got the new bootloader. I'll be waiting for a know trip-free method to root this thing
AhmadAlmousa said:
Thank you guys...
I think now I'm screwed root-wise :crying: !! I've got the new bootloader. I'll be waiting for a know trip-free method to root this thing
Click to expand...
Click to collapse
Maybe not quite. Check your laws regarding warranty returns and the rules, It is possible that your country may enforce a directive that will make "The Seller" replace/fix your phone regardless what modifications you have made to it - -IE: Root/Tripped KNOX etc. NOT guaranteed, but check to be 100% certain.

SM9005 emergency call only

Hi
I have Note3 SM9005, it is from Germany and region locked,
it is for a friend, he give it to somebody to unlock it to him , but i don't know what is wrong that guy did to the phone,
Now the phone not asking for any network pin code, but always emergency call only, and IMEI and SN are same like on sticker
I tried flash with N9005XXUDMJ7_N9005OJVDMJ4_KSA but still same
tried root then Rigion lock away apk but still same
any help
best regards
MAK
I have the same issue on a stock 9005 after ota update in uk mk2 it will not connect to a network tried to flash mj6 but failed im not sure weather to try another region as it isnt mine so dont want to mess it up
Sent from my GT-N7100 using xda app-developers app
If I were you, I would prefer to leave them to service centers.
I bought from Germany but using it inside eu and region lock wiped automatically for non eu sim cards.
Sent from my SM-N9005 using Tapatalk

Categories

Resources